An amperometric immunosensor based on multi-walled carbon nanotubes-thionine-chitosan nanocomposite film for chlorpyrifos detection

Recent advances in electrochemical and optical sensing of the organophosphate chlorpyrifos: a review

Chlorpyrifos (CP) is one of the most popular organophosphorus pesticides that is commonly used in agricultural and nonagricultural environments to combat pests. However, several concerns regarding contamination due to the unmitigated use of chlorpyrifos have come up over recent years. This has popularized research on various techniques for chlorpyrifos detection. Since conventional methods do not enable smooth detection, the recent trends of chlorpyrifos detection have shifted toward electrochemical and optical sensing techniques that offer higher sensitivity and selectivity. The objective of this review is to provide a brief overview of some of the important and innovative contributions in the field of electrochemical and optical sensing of chlorpyrifos with a primary focus on the comparative advantages and shortcomings of these techniques. This review paper will help to offer better perspectives for research in organophosphorus pesticide detection in the future.

Electrochemical (Bio)Sensors for the Detection of Organophosphorus Pesticides Based on Nanomaterial-Modified Electrodes: A Review

Organophosphorus pesticides were easily remained in fruits and vegetables which would be harm to the environmental safety and human health. In recent years, due to the simple preparation process, fast response and high sensitivity, the electrochemical (bio)sensors have received increasing attention, which were extensively used as the sensing platform for the detection of OPPs. The mechanisms for the determination of OPPs mainly included redox of nitrophenyl OPPs, enzyme hydrolysis and inhibition, immunosensor, aptasensor. Nowadays, the mainly explored electrode material has focused on metal-organic frameworks, metal and metal derivatives, carbon materials (carbon nanotube, graphene, g-C3N4), MXene, etc. These nanomaterials played important roles in the electrochemical (bio)sensors, which included: (a) as an electrocatalyst to promote the redox reaction, (b) as a carrier to load the enzyme or aptamer, (c) as a recognizer to identify the targets. The nanomaterials-based electrochemical (bio)sensor was a rapid, cost-effective methods to detect OPPs with high sensitivity. Besides, this review compared the analytical performance of different nanomaterials-based electrochemical (bio)sensors, and also identified the key challenges in the future. It would provide new ideas and insights to the further development and application of electrochemical (bio)sensors and the detection of pesticides in real samples.

Biosensors in Evaluation of Quality of Meat and Meat Products – A Review

Biosensors can find application in meat and meat products testing for safety, including microbial and other contaminants, and quality, including meat freshness, beef tenderness and pork quality defects. The available biosensors enable the evaluation of freshness, the classification of tenderness of meat products, the evaluation of the glycolysis extent and the presence of the microbial and other contaminants. Since biosensors depend on receptor types, the expansion of knowledge on metabolic transformations occurring in meat contributes to the development of new potential markers and indicators. Examples include assays for glucose, lactates, hypoxanthines, calpastastins, microbial and other contaminants in meat products, augmenting conventional methods. At the same time, biosensors rely on transducers for detection, requiring achievement in many fields including nanotechnology and optics, among others. Biosensors have potential to become a fundamental tool for monitoring and controlling safety and quality of meat products in the future. Hence the aim of the present paper is to present the current state of knowledge on the application of biosensors in meat.

Magnetically controlled colorimetric aptasensor for chlorpyrifos based on copper-based metal-organic framework nanoparticles with peroxidase mimetic property

The fabrication of a magnetically controlled colorimetric aptasensor for chlorpyrifos is reported. The aptasensor was fabricated by the attachment of the colorimetric labels onto the magnetic carrier due to the hybridization reaction between the complementary DNA and aptamer. Chlorpyrifos detection was realized by monitoring the color changes of the TMB/H₂O₂ solution before and after incubation of the aptasensor with chlorpyrifos via exposure to external magnetic force. The color change was monitored at 650 nm by UV-Vis spectrophotometer. Under the optimal conditions, this magnetically controlled Cu-MOF-based aptasensor showed a detection limit of 4.4 ng/mL with a linear range of 0-1250 ng/mL. The colorimetric aptasensor displayed high selectivity for chlorpyrifos toward other interfering pesticides. The aptasensor was successfully applied for the spiked test of chlorpyrifos in fruits and vegetable samples with good recovery, which were in agreement with data obtained by GC-MS analysis. This magnetically controlled Cu-MOF-based sensing strategy not only leads to development of efficient and facile phase separation, but also expands the MOF's target scope from H₂O₂ or glucose to pesticides. Graphical abstract.

Nanomaterial-based immunosensors for ultrasensitive detection of pesticides/herbicides: Current status and perspectives

The increasing level of pesticides and herbicides in food and water sources is a growing threat to human health and the environment. The development of portable, sensitive, specific, simple, and cost-effective sensors is hence in high demand to avoid exposure or consumption of these chemicals through efficient monitoring of their levels in food as well as water samples. The use of nanomaterials (NMs) for the construction of an immunosensing system was demonstrated to be an efficient and effective option to realize selective sensing against pesticides/herbicides. The potential of such applications has hence been demonstrated for a variety of NMs including graphene, carbon nanotubes (CNTs), metal nanoparticles, and nano-polymers either in pristine or composite forms based on diverse sensing principles (e.g., electrochemical, optical, and quartz crystal microbalance (QCM)). This article evaluates the development, applicability, and performances of NM-based immunosensors for the measurement of pesticides and herbicides in water, food, and soil samples. The performance of all the surveyed sensors has been evaluated on the basis of key parameters, e.g., detection limit (DL), sensing range, and response time.

Analytical techniques for the detection of glycated haemoglobin underlining the sensors

The increase in concentrations of blood glucose results arise in the proportion of glycated haemoglobin. Therefore, the percentage of glycated haemoglobin in the blood could function as a biomarker for the average glucose level over the past three months and can be used to detect diabetes. The study of glycated haemoglobin tends to be complex as there are about three hundred distinct assay techniques available for evaluating glycated haemoglobin which contributes to some differences in the recorded values from the similar samples. This review outlines distinct analytical methods that have evolved in the recent past for precise recognition of the glycated - proteins.

Bioorthogonal Reactions Amplify Magnetic Nanoparticles Binding and Assembly for Ultrasensitive Magnetic Resonance Sensing

Conventional transverse relaxation time (T₂)-mediated magnetic resonance sensors (MRS) that utilizing the target-induces state change of magnetic nanoparticles (MNPs) mainly suffer from low sensitivity. Recent T₂-MRS that based on target-induced amount change of MNPs can achieve a higher sensitivity, but these sensors can hardly accommodate small molecules. We herein develop an ultrasensitive T₂-MRS that enable the detection of small molecules based on cascade bioorthogonal reactions (BRs)-realized MNPs binding and assembly. Benefiting from rapid and highly selective cascade BRs, a single small molecule target can not only increase MNPs binding but also assembly MNPs, which greatly amplifies T₂ signal for sensing based on both the state and amount change of MNPs for the first time. Our strategy is capable of sensing chlorpyrifos with a liner range of 0.1 ng/mL to 1000 ng/mL. We justify the practicability of our assay by detecting chlorpyrifos in apple and cabbage samples, whose accuracy is higher than that of enzyme linked immunosorbent assay. Our assay provides a cascade BRs-mediated MRS that can greatly broaden the use of T₂-based MRS for ultrasensitive sensing trace small molecules in complex samples.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Electrochemical Detection for Uric Acid Based on β-Lactoglobulin-Functionalized Multiwall Carbon Nanotubes Synthesis with PtNPs Nanocomposite

In this work, a simple and highly selective electrochemical biosensor for determination of uric acid (UA) is synthesized by using β-lactoglobulin (BLG)-functionalized multiwall carbon nanotubes (MWCNTs) and a platinum nanoparticles (PtNPs) nanocomposite. Urate oxidase (UOx) can oxidize uric acid to hydrogen peroxide and allantoin, which provides a good opportunity for electrochemical detection for UA. Under the optimized conditions, the current changes by the UOx/Bull Serum Albumin (BSA)/BLG-MWCNTs-PtNPs/Glassy Carbon (GC) electrode with the electrochemical method was proportional to the concentration of UA. According to experiments, we obtained a linear response with a concentration range from 0.02 to 0.5 mM and achieved a high sensitivity of 31.131 μA mM⁻¹ and a low detection limit (0.8 μΜ). Meanwhile, nanoparticles improved the performance of the biosensor and combined with BLG not only prevented the accumulation of composite nanomaterials, but also provided immobilization of uricase through electrostatic adsorption. This improves the stability and gives the constructed electrode sensing interface superior performance in UA detection.

Ultrasensitive electrochemical immuno-sensing platform based on gold nanoparticles triggering chlorpyrifos detection in fruits and vegetables

Chlorpyrifos (chl) is an organophosphate pesticide extensively used in agriculture and highly toxic for human health. Fluorine doped tin-oxide (FTO) based electrochemical nanosensor was developed for chlorpyrifos detection with gold nanoparticles (AuNPs) and anti-chlorpyrifos antibodies (chl-Ab). AuNPs provides high electrical conductivity and specific resistivity, thus increases the sensitivity of immunoassay. High electrical conductivity of AuNPs reveals that it promotes the redox reaction for better cyclic voltammetry. Based on the intrinsic conductive properties of FTO-AuNPs complex, chl-Ab was immobilized onto AuNPs surface. Under optimized conditions, the proposed FTO based nanosensor exhibited high sensitivity and stable response for the detection of chlorpyrifos, ranging from 1fM to 1µM with limit of detection (LOD) up to 10fM. The FTO-AuNPs sensor was successfully employed for the detection of chlorpyrifos in standard as well in real samples up to 10nM for apple and cabbage, 50nM for pomegranate. The proposed FTO-AuNPs nanosensor can be used as a quantitative tool for rapid, on-site detection of chlorpyrifos traces in real samples when miniaturized due to its excellent stability, sensitivity, and simplicity.

An electrochemical immunosensor for sensitive detection of Escherichia coli O157:H7 by using chitosan, MWCNT, polypyrrole with gold nanoparticles hybrid sensing platform

An electrochemical immunosensor for the common food pathogen Escherichia coli O157:H7 was developed. This novel immunosensor based on the PPy/AuNP/MWCNT/Chi hybrid bionanocomposite modified pencil graphite electrode (PGE). This hybrid bionanocomposite platform was modified with anti-E. coli O157:H7 monoclonal antibody. The prepared bionanocomposite platform and immunosensor was characterized by using cyclic voltammetry (CV). Under the optimum conditions, the results have shown the order of the preferential selectivity of the method is gram negative pathogenic species E. coli O157:H7. Concentrations of E. coli O157:H7 from 3×10¹ to 3×10⁷cfu/mL could be detected. The detection limit was ∼30cfu/mL in PBS buffer. Briefly, we developed a high sensitive electrochemical immunosensor for specific detection of E. coli O157:H7 contamination with the use of sandwich assay evaluated in this study offered a reliable means of quantification of the bacteria. For the applications in food quality and safety control, our immunosensor showed reproducibility and stability.

A Label-Free Microelectrode Array Based on One-Step Synthesis of Chitosan-Multi-Walled Carbon Nanotube-Thionine for Ultrasensitive Detection of Carcinoembryonic Antigen

Carcinoembryonic antigen (CEA) has been an extensively used tumor marker responsible for clinical early diagnosis of cervical carcinomas, and pancreatic, colorectal, gastric and lung cancer. Combined with micro-electro mechanical system (MEMS) technology, it is important to develop a novel immune microelectrode array (MEA) not only for rapid analysis of serum samples, but also for cell detection in vitro and in vivo. In this work, we depict a simple approach to modify chitosan–multi-walled carbon nanotubes–thionine (CS–MWCNTs–THI) hybrid film through one-step electrochemical deposition and the CS-MWCNTs-THI hybrid films are successfully employed to immobilize anti-CEA for fabricating simple, label-free, and highly sensitive electro-chemical immune MEAs. The detection principle of immune MEA was based on the fact that the increasing formation of the antigen-antibody immunocomplex resulted in the decreased response currents and the relationship between the current reductions with the corresponding CEA concentrations was directly proportional. Experimental results indicated that the label-free MEA had good selectivity and the limit of detection for CEA is 0.5 pg/mL signal to noise ratio (SNR) = 3. A linear calibration plot for the detection of CEA was obtained in a wide concentration range from 1 pg/mL to 100 ng/mL (r = 0.996). This novel MEA has potential applications for detecting CEA for the research on cancer cells and cancer tissue slices as well as for effective early diagnosis.

Engineered Carbon-Nanomaterial-Based Electrochemical Sensors for Biomolecules

The study of electrochemical behavior of bioactive molecules has become one of the most rapidly developing scientific fields. Biotechnology and biomedical engineering fields have a vested interest in constructing more precise and accurate voltammetric/amperometric biosensors. One rapidly growing area of biosensor design involves incorporation of carbon-based nanomaterials in working electrodes, such as one-dimensional carbon nanotubes, two-dimensional graphene, and graphene oxide. In this review article, we give a brief overview describing the voltammetric techniques and how these techniques are applied in biosensing, as well as the details surrounding important biosensing concepts of sensitivity and limits of detection. Building on these important concepts, we show how the sensitivity and limit of detection can be tuned by including carbon-based nanomaterials in the fabrication of biosensors. The sensing of biomolecules including glucose, dopamine, proteins, enzymes, uric acid, DNA, RNA, and H2O2 traditionally employs enzymes in detection; however, these enzymes denature easily, and as such, enzymeless methods are highly desired. Here we draw an important distinction between enzymeless and enzyme-containing carbon-nanomaterial-based biosensors. The review ends with an outlook of future concepts that can be employed in biosensor fabrication, as well as limitations of already proposed materials and how such sensing can be enhanced. As such, this review can act as a roadmap to guide researchers toward concepts that can be employed in the design of next generation biosensors, while also highlighting the current advancements in the field.

Aptasensors modified by antimony tin oxide nanoparticle-chitosan based on interdigitated array microelectrodes for tetracycline detection

Aptasensors modified by antimony tin oxide nanoparticle-chitosan (nano ATO-CS) based on interdigitated array microelectrodes (IDAMs) were developed for the detection of tetracycline.

Electrochemical immunosensors and their recent nanomaterial-based signal amplification strategies: a review

In recent years, tremendous advances have been made in biosensors based on nanoscale electrochemical immunosensors for use in the fields of agriculture, food safety, biomedicine, quality control, and environmental and industrial monitoring.

Selective recognition of 5-hydroxytryptamine and dopamine on a multi-walled carbon nanotube-chitosan hybrid film-modified microelectrode array

It is difficult to determine dopamine (DA) and 5-hydroxytryptamine (5-HT) accurately because of the interference of ascorbic acid (AA) in vitro, which has a high concentration and can be oxidized at a potential close to DA and 5-HT at a conventional electrode, combined with the overlapping voltammetric signal of DA and 5-HT at a bare electrode. Herein, chitosan (CS) was used as a stabilizing matrix by electrochemical reaction, and multi-walled carbon nanotubes (MWCNTs) were modified onto the microelectrode array (MEA). The CS-MWCNT hybrid film-modified MEA was quite effective at simultaneously recognizing these species in a mixture and resolved the overlapping anodic peaks of AA, DA and 5-HT into three well-defined oxidation peaks in differential pulse voltammetry (DPV) at −80 mV, 105 mV and 300 mV (versus Ag|AgCl), respectively. The linear responses were obtained in the range of 5 × 10⁻⁶ M to 2 × 10⁻⁴ M for DA (r = 0.996) and in the range of 1 × 10⁻⁵ M to 3 × 10⁻⁴ M for 5-HT (r = 0.999) using the DPV under the presence of a single substance. While DA coexisted with 5-HT in the interference of 3 × 10⁻⁴ M AA, the linear responses were obtained in the range of 1 × 10⁻⁵ M to 3 × 10⁻⁴ M for selective molecular recognition of DA (r = 0.997) and 5-HT (r = 0.997) using the DPV. Therefore, this proposed MEA was successfully used for selective molecular recognition and determination of DA and 5-HT using the DPV, which has a potential application for real-time determination in vitro experiments.

Application of an electrochemical immunosensor with a MWCNT/PDAA modified electrode for detection of serum trypsin

Objective: To establish an electrochemical immunosensor for the determination of serum trypsin levels using a multiwall carbon nanotubes (MWCNTs)-composite-modified electrode. Method: A MWCNT composite coated on the surface of bare gold electrodes was used for fixation of an anti-trypsin antibody. The assembly process and the performance indicators, including sensitivity, linear range of detection, anti-jamming performance, and stability, of the electrochemical immunosensor were examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Results: With optimized experimental conditions, the difference of the current value measured by differential pulse voltammetry (DPV) showed a linear relationship with the concentration of serum trypsin within 0.10–100 ng/mL. The detection limit for trypsin using this sensor was 0.002 ng/mL. Conclusions: The electrochemical immunosensor built using the MWCNT-composite-modified electrode is simple to operate and has a fast response time, along with a wide linear range, high sensitivity, and accuracy, making it suitable for serum trypsin detection.