Hyperpolarized NMR probes for biological assays

Molecules, Up Your Spins!

Nuclear magnetic resonance (NMR) spectroscopy and magnetic resonance imaging (MRI) are indispensable tools in science and medicine, offering insights into the functions of biological processes [...].

Hyperpolarized long-lived spin state of methylene protons of 2-bromoethanol obtained from ethylene with non-equilibrium nuclear spin order

In this work we achieve a significant overpopulation (PLLS≈1%) of the long-lived spin state (LLS) of methylene protons in 2-bromoethan(2H)ol (BrEtOD) obtained in a reaction between ethylene with non-equilibrium nuclear spin order and bromine water. Given all protons in ethylene are magnetically equivalent, its nuclear states are classified into nuclear spin isomers (NSIM) with total spin I = 2,1,0. Addition of parahydrogen to acetylene produces ethylene with a population of only those NSIMs with I = 1,0. As a result of the reaction with bromine water the non-equilibrium spin order of ethylene is partly transferred to the singlet LLS involving the two methylene groups of BrEtOD. The 1H NMR signal enhancement (SE≈200) obtained as a result of the LLS readout is approximately equal to the SE of the hyperpolarized BrEtOD obtained with a single π/4 pulse. The LLS relaxation time (TLLS) was shown to be approximately 40 s (≈8T1) in the argon-bubbled sample.

Hyperpolarised 13C-MRI using 13C-pyruvate in breast cancer: A review

Tumour metabolism can be imaged with a novel imaging technique termed hyperpolarised carbon-13 (13C)-MRI using probes, i.e., endogenously found molecules that are labeled with 13C. Hyperpolarisation of the 13C label increases the sensitivity to a level that allows dynamic imaging of the distribution and metabolism of the probes. Dynamic imaging of [1-13C]pyruvate metabolism is of particular biological interest in cancer because of the Warburg effect resulting in the intratumoural accumulation of [1-13C]pyruvate and conversion to [1-13C]lactate. Numerous preclinical studies in breast cancer and other tumours have shown that hyperpolarised 13C-pyruvate has potential for metabolic phenotyping and response assessment at earlier timepoints than the current clinical imaging techniques allow. The clinical feasibility of hyperpolarised 13C-MRI after the injection of pyruvate in patients with breast cancer has now been demonstrated, with increased 13C-label exchange between pyruvate and lactate present in higher grade tumours with associated increased expression of the monocarboxylate transporter 1 (MCT1), the transmembrane transporter mediating intracellular pyruvate uptake, and lactate dehydrogenase (LDH) as the enzyme catalysing the conversion of pyruvate to lactate. Furthermore, a study in patients with breast cancer undergoing neoadjuvant chemotherapy suggested that early changes in 13C-label exchange can distinguish between patients who reach pathologic complete response (pCR) and those who do not. This review summarises the current literature on preclinical and clinical research on hyperpolarised 13C-MRI with [1-13C]-pyruvate in breast cancer imaging.

Rapid probing of glucose influx into cancer cell metabolism: using adjuvant and a pH-dependent collection of central metabolites to improve in-cell D-DNP NMR

Changes to metabolism are a hallmark of many diseases. Disease metabolism under physiological conditions can be probed in real time with in-cell NMR assays. Here, we pursued a systematic approach towards improved in-cell NMR assays. Unambiguous identifications of metabolites and of intracellular pH are afforded by a comprehensive, downloadable collection of spectral data for central carbon metabolites in the physiological pH range (4.0-8.0). Chemical shifts of glycolytic intermediates provide unique pH dependent patterns akin to a barcode. Using hyperpolarized 13C1 enriched glucose as the probe molecule of central metabolism in cancer, we find that early glycolytic intermediates are detectable in PC-3 prostate cancer cell lines, concurrently yielding intracellular pH. Using non-enriched and non-enhanced pyruvate as an adjuvant, reactions of the pentose phosphate pathway become additionally detectable, without significant changes to the barriers in upper glycolysis and to intracellular pH. The scope of tracers for in-cell observations can thus be improved by the presence of adjuvants, showing that a recently proposed effect of pyruvate in the tumor environment is paralleled by a rerouting of cancer cell metabolism towards producing building blocks for proliferation. Overall, the combined use of reference data for compound identification, site specific labelling for reducing overlap, and use of adjuvant afford increasingly detailed insight into disease metabolism.

Competitive Displacement Restores the Hyperpolarized 15N NMR Signal in Blood Plasma

Hyperpolarized (HP) NMR can improve the sensitivity of conventional NMR experiments by several orders of magnitude, thereby making it feasible to detect the signal of low sensitivity nuclei such as 13C and 15N nuclei in vivo. Hyperpolarized substrates are usually administered by direct injection into the bloodstream, and interaction with serum albumin can cause rapid decay of the hyperpolarized signal due to the shortening of the spin-lattice (T1) relaxation time. Here we report that the 15N T1 of 15N labeled, partially deuterated tris(2-pyridylmethyl)amine decreases dramatically upon binding to albumin to such an extent that no HP-15 signal could be detected. We also demonstrate that the signal could be restored using a competitive displacer, iophenoxic acid, which binds stronger to albumin than tris(2-pyridylmethyl)amine. The methodology presented here eliminates the undesirable effect of albumin binding and should widen the range of hyperpolarized probes for in vivo studies.

State-of-the-art accounts of hyperpolarized 15N-labeled molecular imaging probes for magnetic resonance spectroscopy and imaging

Hyperpolarized isotope-labeled agents have significantly advanced nuclear magnetic resonance spectroscopy and imaging (MRS/MRI) of physicochemical activities at molecular levels. An emerging advance in this area is exciting developments of 15N-labeled hyperpolarized MR agents to enable acquisition of highly valuable information that was previously inaccessible and expand the applications of MRS/MRI beyond commonly studied 13C nuclei. This review will present recent developments of these hyperpolarized 15N-labeled molecular imaging probes, ranging from endogenous and drug molecules, and chemical sensors, to various 15N-tagged biomolecules. Through these examples, this review will provide insights into the target selection and probe design rationale and inherent challenges of HP imaging in hopes of facilitating future developments of 15N-based biomedical imaging agents and their applications.

Structure-guided design enables development of a hyperpolarized molecular probe for the detection of aminopeptidase N activity in vivo

Dynamic nuclear polarization (DNP) is a cutting-edge technique that markedly enhances the detection sensitivity of molecules using nuclear magnetic resonance (NMR)/magnetic resonance imaging (MRI). This methodology enables real-time imaging of dynamic metabolic status in vivo using MRI. To expand the targetable metabolic reactions, there is a demand for developing exogenous, i.e., artificially designed, DNP-NMR molecular probes; however, complying with the requirements of practical DNP-NMR molecular probes is challenging because of the lack of established design guidelines. Here, we report Ala-[1-¹³C]Gly-d₂-NMe₂ as a DNP-NMR molecular probe for in vivo detection of aminopeptidase N activity. We developed this probe rationally through precise structural investigation, calculation, biochemical assessment, and advanced molecular design to achieve rapid and detectable responses to enzyme activity in vivo. With the fabricated probe, we successfully detected enzymatic activity in vivo. This report presents a comprehensive approach for the development of artificially derived, practical DNP-NMR molecular probes through structure-guided molecular design.

Singlet-Contrast Magnetic Resonance Imaging: Unlocking Hyperpolarization with Metabolism*

Hyperpolarization-enhanced magnetic resonance imaging can be used to study biomolecular processes in the body, but typically requires nuclei such as 13 C, 15 N, or 129 Xe due to their long spin-polarization lifetimes and the absence of a proton-background signal from water and fat in the images. Here we present a novel type of 1 H imaging, in which hyperpolarized spin order is locked in a nonmagnetic long-lived correlated (singlet) state, and is only liberated for imaging by a specific biochemical reaction. In this work we produce hyperpolarized fumarate via chemical reaction of a precursor molecule with para-enriched hydrogen gas, and the proton singlet order in fumarate is released as antiphase NMR signals by enzymatic conversion to malate in D2 O. Using this model system we show two pulse sequences to rephase the NMR signals for imaging and suppress the background signals from water. The hyperpolarization-enhanced 1 H-imaging modality presented here can allow for hyperpolarized imaging without the need for low-abundance, low-sensitivity heteronuclei.

Zero-Field NMR J-Spectroscopy of Organophosphorus Compounds

Organophosphorus compounds are a wide and diverse class of chemicals playing a crucial role in living organisms. This aspect has been often investigated using nuclear magnetic resonance (NMR), which provides information about molecular structure and function. In this paper, we report the results of theoretical and experimental studies on basic organophosphorus compounds using zero-field NMR, where spin dynamics are investigated in the absence of a magnetic field with the dominant heteronuclear J-coupling. We demonstrate that the zero-field NMR enables distinguishing the chemicals owing to their unique electronic environment even though their spin systems have the same alphabetic designation. Such information can be obtained just in a single measurement, while amplitudes and widths of observed low-field NMR resonances enable the study of processes affecting spin dynamics. An excellent agreement between simulations and measurements of the spectra, particularly in the largest frequency J-couplings range ever reported in zero-field NMR, is demonstrated.

Hyperpolarized 15N-labeled, deuterated tris (2-pyridylmethyl)amine as an MRI sensor of freely available Zn2

Dynamic nuclear polarization (DNP) coupled with ¹⁵N magnetic resonance imaging (MRI) provides an opportunity to image quantitative levels of biologically important metal ions such as Zn²⁺, Mg²⁺ or Ca²⁺ using appropriately designed ¹⁵N enriched probes. For example, a Zn-specific probe could prove particularly valuable for imaging the tissue distribution of freely available Zn²⁺ ions, an important known metal ion biomarker in the pancreas, in prostate cancer, and in several neurodegenerative diseases. In the present study, we prepare the cell-permeable, ¹⁵N-enriched, d₆-deuterated version of the well-known Zn²⁺ chelator, tris(2-pyridylmethyl)amine (TPA) and demonstrate that the polarized ligand had favorable T₁ and linewidth characteristics for ¹⁵N MRI. Examples of how polarized TPA can be used to quantify freely available Zn²⁺ in homogenized human prostate tissue and intact cells are presented.

Rapid 13C NMR hyperpolarization delivered from para-hydrogen enables the low concentration detection and quantification of sugars

The monosaccharides glucose and fructose are rapidly detected and quantified by ¹³C NMR in conjunction with the hyperpolarisation method signal amplification by reversible exchange-relay.

Monosaccharides, such as glucose and fructose, are important to life. In this work we highlight how the rapid delivery of improved ¹³C detectability for sugars by nuclear magnetic resonance (NMR) can be achieved using the para-hydrogen based NMR hyperpolarization method SABRE-Relay (Signal Amplification by Reversible Exchange-Relay). The significant ¹³C signal enhancements of 250 at a high field of 9.4 T, and 3100 at a low field of 1 T, enable the detection of trace amounts of these materials as well as the quantification of their tautomeric makeup. Using studies on ¹³C and ²H isotopically labelled agents we demonstrate how hyperpolarization lifetime (T₁) values can be extended, and how singlet states with long lifetimes can be created. The precise quantification of d-glucose-¹³C₆-d₇ at the millimolar concentration level is shown to be possible within minutes in conjunction with a linear hyperpolarized response as a function of concentration. In addition to the measurements using labelled materials, low concentration detection is also illustrated for millimolar samples with natural abundance ¹³C where isomeric form quantification can be achieved with a single transient.

Applications of dissolution dynamic nuclear polarization in chemistry and biochemistry

Sensitivity of detection is one of the most limiting aspects when applying NMR spectroscopy to current problems in the molecular sciences. A number of hyperpolarization methods exist for increasing the population difference between nuclear spin Zeeman states and enhance the signal-to-noise ratio by orders of magnitude. Among these methods, dissolution dynamic nuclear polarization (D-DNP) is unique in its capability of providing high spin polarization for many types of molecules in the liquid state. Originally proposed for biomedical applications including in vivo imaging, applications in high resolution NMR spectroscopy are now emerging. These applications are the focus of the present review. Using D-DNP, a small sample aliquot is first hyperpolarized as a frozen solid at low temperature, followed by dissolution into the liquid state. D-DNP extends the capabilities of liquid state NMR spectroscopy towards shorter timescales and enables the study of nonequilibrium processes, such as the kinetics and mechanisms of reactions. It allows the determination of intermolecular interactions, in particular based on spin relaxation parameters. At the same time, a challenge in the application of this hyperpolarization method is that spin polarization is nonrenewable. Substantial effort has been devoted to develop methods for enabling rapid correlation spectroscopy, the measurement of time-dependent signals, and the extension of the observable time window. With these methods, D-DNP has the potential to open new application areas in the chemical and biochemical sciences.

Direct observation of Ru-alkylidene forming into ethylene in ring-closing metathesis from hyperpolarized 1H NMR

Ring-closing metathesis was monitored using real-time NMR of 1H hyperpolarized olefins at room temperature. By applying a selective saturation to an observable intermediate, its protons were found to transfer to ethylene. The intermediate was thus identified as a Ru-alkylidene species, which appears in the ethylene formation pathway.

Rational Design of [13 C,D14 ]Tert-butylbenzene as a Scaffold Structure for Designing Long-lived Hyperpolarized 13 C Probes

Dynamic nuclear polarization (DNP) is a technique to polarize the nuclear spin population. As a result of the hyperpolarization, the NMR sensitivity of the nuclei in molecules can be dramatically enhanced. Recent application of the hyperpolarization technique has led to advances in biochemical and molecular studies. A major problem is the short lifetime of the polarized nuclear spin state. Generally, in solution, the polarized nuclear spin state decays to a thermal spin equilibrium, resulting in loss of the enhanced NMR signal. This decay is correlated directly with the spin-lattice relaxation time T1 . Here we report [13 C,D14 ]tert-butylbenzene as a new scaffold structure for designing hyperpolarized 13 C probes. Thanks to the minimized spin-lattice relaxation (T1 ) pathways, its water-soluble derivative showed a remarkably long 13 C T1 value and long retention of the hyperpolarized spin state.

Direct assessment of the metabolic origin of carbon atoms in glutamate from illuminated leaves using 13 C-NMR

Glutamate (Glu) is the cornerstone of nitrogen assimilation and photorespiration in illuminated leaves. Despite this crucial role, our knowledge of the flux to Glu de novo synthesis is rather limited. Here, we used isotopic labelling with ¹³ CO₂ and ¹³ C-NMR analyses to examine the labelling pattern and the appearance of multi-labelled species of Glu molecules to trace the origin of C-atoms found in Glu. We also compared this with ¹³ C-labelling patterns in Ala and Asp, which reflect citrate (and thus Glu) precursors, that is, pyruvate and oxaloacetate. Glu appeared to be less ¹³ C-labelled than Asp and Ala, showing that the Glu pool was mostly formed by 'old' carbon atoms. There were modest differences in intramolecular ¹³ C-¹³ C couplings between Glu C-2 and Asp C-3, showing that oxaloacetate metabolism to Glu biosynthesis did not involve C-atom redistribution by the Krebs cycle. The apparent carbon allocation increased with carbon net photosynthesis. However, when expressed relative to CO₂ fixation, it was clearly higher at low CO₂ while it did not change in 2% O₂ , as compared to standard conditions. We conclude that Glu production from current photosynthetic carbon represents a small flux that is controlled by the gaseous environment, typically upregulated at low CO₂ .

In-Vitro Dissolution Dynamic Nuclear Polarization for Sensitivity Enhancement of NMR with Biological Molecules

Dissolution dynamic nuclear polarization (D-DNP) is a technique to prepare hyperpolarized nuclear spin states, yielding a signal enhancement of several orders of magnitude for liquid-state NMR. Here, we describe experimental procedures for the application of D-DNP in high-resolution NMR of biochemical compounds, to determine the time evolution of biochemical processes and intermolecular interactions.

NMR Hyperpolarization Techniques of Gases

Nuclear spin polarization can be significantly increased through the process of hyperpolarization, leading to an increase in the sensitivity of nuclear magnetic resonance (NMR) experiments by 4-8 orders of magnitude. Hyperpolarized gases, unlike liquids and solids, can often be readily separated and purified from the compounds used to mediate the hyperpolarization processes. These pure hyperpolarized gases enabled many novel MRI applications including the visualization of void spaces, imaging of lung function, and remote detection. Additionally, hyperpolarized gases can be dissolved in liquids and can be used as sensitive molecular probes and reporters. This Minireview covers the fundamentals of the preparation of hyperpolarized gases and focuses on selected applications of interest to biomedicine and materials science.

Design of a 15N Molecular Unit to Achieve Long Retention of Hyperpolarized Spin State

Nuclear hyperpolarization is a phenomenon that can be used to improve the sensitivity of magnetic resonance molecular sensors. However, such sensors typically suffer from short hyperpolarization lifetime. Herein we report that [¹⁵N, D₁₄]trimethylphenylammonium (TMPA) has a remarkably long spin–lattice relaxation time (1128 s, 14.1 T, 30 °C, D₂O) on its ¹⁵N nuclei and achieves a long retention of the hyperpolarized state. [¹⁵N, D₁₄]TMPA-based hyperpolarized sensor for carboxylesterase allowed the highly sensitive analysis of enzymatic reaction by ¹⁵N NMR for over 40 min in phophate-buffered saline (H₂O, pH 7.4, 37 °C).

Molecular fMRI

Comprehensive analysis of brain function depends on understanding the dynamics of diverse neural signaling processes over large tissue volumes in intact animals and humans. Most existing approaches to measuring brain signaling suffer from limited tissue penetration, poor resolution, or lack of specificity for well-defined neural events. Here we discuss a new brain activity mapping method that overcomes some of these problems by combining MRI with contrast agents sensitive to neural signaling. The goal of this "molecular fMRI" approach is to permit noninvasive whole-brain neuroimaging with specificity and resolution approaching current optical neuroimaging methods. In this article, we describe the context and need for molecular fMRI as well as the state of the technology today. We explain how major types of MRI probes work and how they can be sensitized to neurobiological processes, such as neurotransmitter release, calcium signaling, and gene expression changes. We comment both on past work in the field and on challenges and promising avenues for future development.

SIGNIFICANCE STATEMENT

Brain researchers currently have a choice between measuring neural activity using cellular-level recording techniques, such as electrophysiology and optical imaging, or whole-brain imaging methods, such as fMRI. Cellular level methods are precise but only address a small portion of mammalian brains; on the other hand, whole-brain neuroimaging techniques provide very little specificity for neural pathways or signaling components of interest. The molecular fMRI techniques we discuss have particular potential to combine the specificity of cellular-level measurements with the noninvasive whole-brain coverage of fMRI. On the other hand, molecular fMRI is only just getting off the ground. This article aims to offer a snapshot of the status and future prospects for development of molecular fMRI techniques.

Direct Conversion of Mono- and Polysaccharides into 5-Hydroxymethylfurfural Using Ionic-Liquid Mixtures

Platform chemicals are usually derived from petrochemical feedstocks. A sustainable alternative commences with lignocellulosic biomass, a renewable feedstock, but one that is highly challenging to process. Ionic liquids (ILs) are able to solubilize biomass and, in the presence of catalysts, convert the biomass into useful platform chemicals. Herein, we demonstrate that mixtures of ILs are powerful systems for the selective catalytic transformation of cellulose into 5-hydroxymethylfurfural (HMF). Combining ILs with continuous HMF extraction into methyl-isobutyl ketone or 1,2-dimethoxyethane, which form a biphase with the IL mixture, allows the online separation of HMF in high yield. This one-step process is operated under relatively mild conditions and represents a significant step forward towards sustainable HMF production.

Hyperpolarization of Frozen Hydrocarbon Gases by Dynamic Nuclear Polarization at 1.2 K

We report a simple and general method for the hyperpolarization of condensed gases by dynamic nuclear polarization (DNP). The gases are adsorbed in the pores of structured mesoporous silica matrices known as HYPSOs (HYper Polarizing SOlids) that have paramagnetic polarizing agents covalently bound to the surface of the mesopores. DNP is performed at low temperatures and moderate magnetic fields (T = 1.2 K and B0 = 6.7 T). Frequency-modulated microwave irradiation is applied close to the electron spin resonance frequency (f = 188.3 GHz), and the electron spin polarization of the polarizing agents of HYPSO is transferred to the nuclear spins of the frozen gas. A proton polarization as high as P((1)H) = 70% can be obtained, which can be subsequently transferred to (13)C in natural abundance by cross-polarization, yielding up to P((13)C) = 27% for ethylene.

Optimizing dissolution dynamic nuclear polarization

This article is a short review of some of our recent developments in dissolution dynamic nuclear polarization (d-DNP). We present the basic principles of d-DNP, and motivate our choice to step away from conventional approaches. We then introduce a modified d-DNP recipe that can be summed up as follows. (i) Using broad line polarizing agents to efficiently polarize 1H spins. (ii) Increasing the magnetic field to 6.7 T and above. (iii) Applying microwave frequency modulation. (iv) Applying (1)H-(13)C cross polarization. (v) Transferring hyperpolarized solution through a magnetic tunnel.

Applications of NMR spectroscopy to systems biochemistry

The past decades of advancements in NMR have made it a very powerful tool for metabolic research. Despite its limitations in sensitivity relative to mass spectrometric techniques, NMR has a number of unparalleled advantages for metabolic studies, most notably the rigor and versatility in structure elucidation, isotope-filtered selection of molecules, and analysis of positional isotopomer distributions in complex mixtures afforded by multinuclear and multidimensional experiments. In addition, NMR has the capacity for spatially selective in vivo imaging and dynamical analysis of metabolism in tissues of living organisms. In conjunction with the use of stable isotope tracers, NMR is a method of choice for exploring the dynamics and compartmentation of metabolic pathways and networks, for which our current understanding is grossly insufficient. In this review, we describe how various direct and isotope-edited 1D and 2D NMR methods can be employed to profile metabolites and their isotopomer distributions by stable isotope-resolved metabolomic (SIRM) analysis. We also highlight the importance of sample preparation methods including rapid cryoquenching, efficient extraction, and chemoselective derivatization to facilitate robust and reproducible NMR-based metabolomic analysis. We further illustrate how NMR has been applied in vitro, ex vivo, or in vivo in various stable isotope tracer-based metabolic studies, to gain systematic and novel metabolic insights in different biological systems, including human subjects. The pathway and network knowledge generated from NMR- and MS-based tracing of isotopically enriched substrates will be invaluable for directing functional analysis of other 'omics data to achieve understanding of regulation of biochemical systems, as demonstrated in a case study. Future developments in NMR technologies and reagents to enhance both detection sensitivity and resolution should further empower NMR in systems biochemical research.

Low-field thermal mixing in [1-13C] pyruvic acid for brute-force hyperpolarization

We detail the process of low-field thermal mixing (LFTM) between ¹H and ¹³C nuclei in neat [1-¹³C] pyruvic acid at cryogenic temperatures (4–15 K).

Transport and imaging of brute-force (13)C hyperpolarization

We demonstrate transport of hyperpolarized frozen 1-(13)C pyruvic acid from its site of production to a nearby facility, where a time series of (13)C images was acquired from the aqueous dissolution product. Transportability is tied to the hyperpolarization (HP) method we employ, which omits radical electron species used in other approaches that would otherwise relax away the HP before reaching the imaging center. In particular, we attained (13)C HP by 'brute-force', i.e., using only low temperature and high-field (e.g., T<∼2K and B∼14T) to pre-polarize protons to a large Boltzmann value (∼0.4% (1)H polarization). After polarizing the neat, frozen sample, ejection quickly (<1s) passed it through a low field (B<100G) to establish the (1)H pre-polarization spin temperature on (13)C via the process known as low-field thermal mixing (yielding ∼0.1% (13)C polarization). By avoiding polarization agents (a.k.a. relaxation agents) that are needed to hyperpolarize by the competing method of dissolution dynamic nuclear polarization (d-DNP), the (13)C relaxation time was sufficient to transport the sample for ∼10min before finally dissolving in warm water and obtaining a (13)C image of the hyperpolarized, dilute, aqueous product (∼0.01% (13)C polarization, a >100-fold gain over thermal signals in the 1T scanner). An annealing step, prior to polarizing the sample, was also key for increasing T1∼30-fold during transport. In that time, HP was maintained using only modest cryogenics and field (T∼60K and B=1.3T), for T1((13)C) near 5min. Much greater time and distance (with much smaller losses) may be covered using more-complete annealing and only slight improvements on transport conditions (e.g., yielding T1∼5h at 30K, 2T), whereas even intercity transfer is possible (T1>20h) at reasonable conditions of 6K and 2T. Finally, it is possible to increase the overall enhancement near d-DNP levels (i.e., 10(2)-fold more) by polarizing below 100mK, where nanoparticle agents are known to hasten T1 buildup by 100-fold, and to yield very little impact on T1 losses at temperatures relevant to transport.

Application of the Steady-State Variable Nutation Angle Method for Faster Determinations of Long T 1s-An Approach Useful for the Design of Hyperpolarized MR Molecular Probes

In the dissolution-dynamic nuclear polarization technique, molecular probes with long T 1s are preferred. 13C nuclei of small molecules with no directly bonded protons or sp(3 13)C nuclei with proton positions substituted by deuterons may fulfill this requirement. The T 1 determination of such new molecular probes is crucial for the success of the hyperpolarized observation. Although the inversion-recovery approach remained by and large the standard for T 1 measurements, we show here that the steady-state variable nutation angle approach is faster and may be better suited for the determination of relatively long T 1s in thermal equilibrium. Specifically, the T 1 of a new molecular probe, [uniformly labeled (UL)-13C6, UL-2H8]2-deoxy-d-glucose, is determined here and compared to that of [UL-13C6, UL-2H7]d-glucose.

2'-O-[(4-CF3-triazol-1-yl)methyl] Uridine - A Sensitive (19)F NMR Sensor for the Detection of RNA Secondary Structures

A sensitive uridine-derived sensor (viz., 2'-O-[(4-CF3-triazol-1-yl)methyl]uridine, 1) for (19)F NMR spectroscopic monitoring of RNA secondary structures is described. The applicability of 1 is demonstrated by monitoring the thermal denaturation of the following double and triple helical RNA models: (1) a miR 215 hairpin, (2) a poly U-A*U triple helix RNA (bearing two C-G*C(H+) interrupts), and (3) a polyadenylated nuclear-nuclear retention element complex. In these RNA models, the (19)F NMR shift of the 2'-O-(CF3-triazolylmethyl) group shows high sensitivity to secondary structural arrangements. Moreover, 1 favors the desired N-conformation, and its effect on both RNA duplex and triplex stabilities is marginal.

Implementation and characterization of flow injection in dissolution dynamic nuclear polarization NMR spectroscopy

The use of dissolution dynamic nuclear polarization (D-DNP) offers substantially increased signals in liquid-state NMR spectroscopy. A challenge in realizing this potential lies in the transfer of the hyperpolarized sample to the NMR detector without loss of hyperpolarization. Here, the use of a flow injection method using high-pressure liquid leads to improved performance compared to the more common gas-driven injection, by suppressing residual fluid motions during the NMR experiment while still achieving a short injection time. Apparent diffusion coefficients are determined from pulsed field gradient echo measurements, and are shown to fall below 1.5 times the value of a static sample within 0.8 s. Due to the single-scan nature of D-DNP, pulsed field gradients are often the only choice for coherence selection or encoding, but their application requires stationary fluid. Sample delivery driven by a high-pressure liquid will improve the applicability of these types of D-DNP advanced experiments.

FmRα analysis: Rapid and direct estimation of relaxation and kinetic parameters from dynamic nuclear polarization time courses

PURPOSE

To introduce a direct method for estimating relaxation and kinetic parameter values from rapid dissolution dynamic nuclear polarization (RD-DNP) NMR time courses.

THEORY AND METHODS

The analysis relied on a kinetic model that is often used to analyze data in these studies-a unidirectional (bio)chemical reaction with rate constant k1 , coupled to longitudinal relaxation of the magnetization of substrate and product that is characterized by the time constant T1 . The latter value was estimated from the width of the product curve (peak) at the height α relative to the maximum height. We showed α ∼ 0.8 under most conditions, so we measured the interval between the falling and rising parts of the curve at the relative height 0.8. We called this the "fall-minus-rise time at height α," or FmRα , and found that FmR0.8 ∼ T1 . The ratio β = (product signal/substrate signal) when the product is maximal was shown to be equal to k1 T1 . Therefore, k1 = β/FmR0.8 .

RESULTS

FmRα analysis was demonstrated with (13) C NMR RD-DNP data recorded from hemolysates and from previously published data.

CONCLUSION

FmRα analysis enables immediate estimates of kinetic and relaxation parameters from (13) C NMR RD-DNP data. The values can be used as initial estimates in more extensive computer-based data-regression analysis.