Soil Washing Optimization, Recycling of the Solution, and Ecotoxicity Assessment for the Remediation of Pb-Contaminated Sites Using EDDS

Integrating phytoremediation and mycoremediation with biosurfactant-producing fungi for hydrocarbon removal and the potential production of secondary resources

Treatment of petroleum-contaminated soil to a less toxic medium via physical and chemical treatment is too costly and requires posttreatment. This review focuses on the employment of phytoremediation and mycoremediation technologies in cleaning hydrocarbon-contaminated soil which is currently rare. It is considered environmentally beneficial and possibly cost-effective as it implements the synergistic interaction between plants and biosurfactant producing mycorrhiza to degrade hydrocarbon contaminants. This review also covers possible sources of hydrocarbon pollution in water and soil, toxicity effects, and current technologies for hydrocarbon removal and degradation. In addition to these problems, this review also discusses the challenges and opportunities of transforming the resultant treated sludge and treating plants into potential by-products for a higher quality of life for future generations.

EDTA and IAA Ameliorates Phytoextraction Potential and Growth of Sunflower by Mitigating Cu-Induced Morphological and Biochemical Injuries

As an essential micronutrient, copper is vital for normal growth and development of plants, however, its accumulation in soil exerts a severe negative impact on the agronomic characteristics and yield of the crop plants. Phytoextraction is a low-cost method for restoring soil fertility and avoiding losses due to heavy metal contamination. We found that using EDTA and IAA together improved sunflower hyperaccumulation capacity. Sunflowers were cultivated under various levels of Cu (0 (control), 25, 50, and 75 mg/kg of soil) and treated with EDTA alone or combined with IAA. The results revealed that the amended treatment significantly enhanced the absorption and accumulation of Cu in the sunflowers. Furthermore, the various doses of Cu significantly reduced the root and shoot growth of sunflowers in a concentration-dependent manner by impairing the chlorophyll content, hormones (indole 3-acetic acid, salicylic acid, and gibberellic acid), flavonoids, phenolics, and antioxidant response. The injurious effect of Cu was reduced by the addition of EDTA alone, and the supplementation of IAA led to a significant restoration of shoot growth (~70%) and root growth (~13%) as compared to the plant treated with Cu alone. Moreover, significantly higher levels of chlorophyll content, GA3, endogenous IAA, and flavonoids were recorded, indicating the effectiveness of the treatment in ameliorating plant health. The results also showed considerable restoration of the catalase and ascorbate peroxidase activities in plants treated with EDTA and IAA. These results are suggestive that application of EDTA and IAA enhances the Cu absorption potential of sunflower and increases its tolerance to copper, which may not only serve as a better technique for phytoextraction of Cu, but also to bring Cu contaminated soil under cultivation.

Remediation of soil polluted with petroleum hydrocarbons and its reuse for agriculture: Recent progress, challenges, and perspectives

Petroleum hydrocarbons (PHs) are used as raw materials in many industries and primary energy sources. However, excessive PHs act as soil pollutants, posing serious threats to living organisms. Various ex-situ or in-situ chemical and biological methods are applied to restore polluted soil. However, most of the chemical treatment methods are expensive, environmentally unfriendly, and sometimes inefficient. That attracts scientists and researchers to develop and select new strategists to remediate polluted soil through risk-based analysis and eco-friendly manner. This review discusses the sources of PHs, properties, distribution, transport, and fate in the environment, internal and external factors affecting the soil remediation and restoration process, and its effective re-utilization for agriculture. Bioremediation is an eco-friendly method for degrading PHs, specifically by using microorganisms. Next-generation sequencing (NGS) technologies are being used to monitor contaminated sites. Currently, these new technologies have caused a paradigm shift by giving new insights into the microbially mediated biodegradation processes by targeting rRNA are discussed concisely. The recent development of risk-based management for soil contamination and its challenges and future perspectives are also discussed. Furthermore, nanotechnology seems very promising for effective soil remediation, but its success depends on its cost-effectiveness. This review paper suggests using bio-electrochemical systems that utilize electro-chemically active microorganisms to remediate and restore polluted soil with PHs that would be eco-friendlier and help tailor-made effective and sustainable remediation technologies.

Phytotoxicity of petroleum hydrocarbons: Sources, impacts and remediation strategies

Extraction and exploration of petroleum hydrocarbons (PHs) to satisfy the rising world population's fossil fuel demand is playing havoc with human beings and other life forms by contaminating the ecosystem, particularly the soil. In the current review, we highlighted the sources of PHs contamination, factors affecting the PHs accumulation in soil, mechanisms of uptake, translocation and potential toxic effects of PHs on plants. In plants, PHs reduce the seed germination andnutrients translocation, and induce oxidative stress, disturb the plant metabolic activity and inhibit the plant physiology and morphology that ultimately reduce plant yield. Moreover, the defense strategy in plants to mitigate the PHs toxicity and other potential remediation techniques, including the use of organic manure, compost, plant hormones, and biochar, and application of microbe-assisted remediation, and phytoremediation are also discussed in the current review. These remediation strategies not only help to remediate PHs pollutionin the soil rhizosphere but also enhance the morphological and physiological attributes of plant and results to improve crop yield under PHs contaminated soils. This review aims to provide significant information on ecological importance of PHs stress in various interdisciplinary investigations and critical remediation techniques to mitigate the contamination of PHs in agricultural soils.

Simultaneous removal of Cr(III) from high contaminated soil and recovery of lactic acid from the spent solution

It is proposed a closed-loop treatment cycle for Cr(III) removal from contaminated soils (2080 mg/kg). The treatment includes the use of lactic acid as washing agent, and the recovery of both Cr(II) and lactic acid from the spent solution. Results indicate that Cr(III) removal efficiency can be very high, passing 70% in all tested operative conditions. The metal forms strong complexes with lactic acid, and therefore cannot be eliminated through direct precipitation simply increasing the pH value. Therefore, lactic acid is preliminarily extracted from the solution using n-butanol at very acidic pH. The obtained extraction degree is generally high, varying between 0.5 and 1 according to the amount of used n-butanol solution. After lactic acid extraction, almost 100% of chromium can be recovered through precipitation in alkaline conditions. Lactic acid, in turns, can be purified and reused for a new washing treatment, separating it from n-butanol solution through water extraction. The extraction efficiency is once more satisfying (around 0.5), and not dependent on the operative pH.

Sorption Mechanism and Optimization Study for the Bioremediation of Pb(II) and Cd(II) Contamination by Two Novel Isolated Strains Q3 and Q5 of Bacillus sp

The use of bacterial strains as agents in bioremediation processes could reduce the harmfulness of potential toxic elements (PTEs) from water and soil with low or even no impact on the natural ecosystems. In this study, two new metal resistant-bacterial strains (Q3 and Q5) of Bacillus sp. were isolated from a sulfurous spring and their potential (as pure cultures or mixed) to remove Pb(II) and Cd(II) from an aqueous matrix was evaluated and optimized using response surface methodology (RSM). The optimal conditions for Cd(II) removal from all tested strains combinations were observed at an initial pH 5, a temperature of 38 °C, and an initial Cd(II) concentration of 50 mg L-1, while the performance of bacterial strains on Pb(II) removal was strongly correlated to initial pH and temperature conditions. Moreover, the efficiency of bacterial strains in removing both PTEs, Pb(II) and Cd(II), from an aqueous matrix was considerably higher when they were used as a mixed culture rather than pure. According to field emission SEM (FESEM) and EDS analysis, the two bacterial strains showed different mechanisms in removing Cd(II): Bacillus sp. Q5 bio-accumulated Cd(II) in its periplasmic space, whereas Bacillus sp. Q3 bio-accumulated Cd(II) on its cell surface. On the other hand, Pb(II) is removed by chemical precipitation (lead sulfide) induced by both Bacillus sp. Q3 and Q5. This study discloses new aspects of Pb(II) and Cd(II) bioremediation mechanisms in Bacillus species that can be extremely useful for designing and operating novel PTEs bioremediation processes.

Comparing performances, costs and energy balance of ex situ remediation processes for PAH-contaminated marine sediments

This study proposes a comparison of different ex situ technologies aimed at the removal of polycyclic aromatic hydrocarbons from marine sediments in terms of performances, costs and energy balance. In accordance with the principles of water-energy nexus, anaerobic bioremediation, soil washing and thermal desorption were investigated under low liquid phase and temperature conditions using phenanthrene (PHE) as model compound. After 42 days of anaerobic bioremediation, the highest PHE biodegradation of 68 and 64% was observed under denitrifying and methanogenic conditions, respectively, accompanied by N₂ and CH₄ production and volatile fatty acid accumulation. During soil washing, more than 97% of PHE was removed after 60 min using a solid-to-liquid ratio of 1:3. Along the same treatment time, low-temperature thermal desorption (LTTD) allowed a PHE removal of 88% at 200 °C. The economic analysis indicated that LTTD resulted in a higher cost (i.e. 1782 € m^-3) than bioremediation and soil washing (228 and 371 € m^-3, respectively). The energy balance also suggested that bioremediation and soil washing are more sustainable technologies as a lower required energy (i.e. 16 and 14 kWh m^-3, respectively) than LTTD (i.e. 417 kWh m^-3) is needed.

Flax (Linum usitatissimum L.): A Potential Candidate for Phytoremediation? Biological and Economical Points of View

Flax (Linum usitatissimum L.) is an important oil seed crop that is mostly cultivated in temperate climates. In addition to many commercial applications, flax is also used as a fibrous species or for livestock feed (animal fodder). For the last 40 years, flax has been used as a phytoremediation tool for the remediation of different heavy metals, particularly for phytoextraction when cultivated on metal contaminated soils. Among different fibrous crops (hemp, jute, ramie, and kenaf), flax represents the most economically important species and the majority of studies on metal contaminated soil for the phytoextraction of heavy metals have been conducted using flax. Therefore, a comprehensive review is needed for a better understanding of the phytoremediation potential of flax when grown in metal contaminated soil. This review describes the existing studies related to the phytoremediation potential of flax in different mediums such as soil and water. After phytoremediation, flax has the potential to be used for additional purposes such as linseed oil, fiber, and important livestock feed. This review also describes the phytoremediation potential of flax when grown in metal contaminated soil. Furthermore, techniques and methods to increase plant growth and biomass are also discussed in this work. However, future research is needed for a better understanding of the physiology, biochemistry, anatomy, and molecular biology of flax for increasing its pollutant removal efficiency.

Jute: A Potential Candidate for Phytoremediation of Metals-A Review

Jute (Corchorus capsularis) is a widely cultivated fibrous species with important physiological characteristics including biomass, a deep rooting system, and tolerance to metal stress. Furthermore, Corchorus species are indigenous leafy vegetables and show phytoremediation potential for different heavy metals. This species has been used for the phytoremediation of different toxic pollutants such as copper (Cu), cadmium (Cd), zinc (Zn), mercury (Hg) and lead (Pb). The current literature highlights the physiological and morphological characteristics of jute that are useful to achieve successful phytoremediation of different pollutants. The accumulation of these toxic heavy metals in agricultural regions initiates concerns regarding food safety and reductions in plant productivity and crop yield. We discuss some innovative approaches to increase jute phytoremediation using different chelating agents. There is a need to remediate soils contaminated with toxic substances, and phytoremediation is a cheap, effective, and in situ alternative, and jute can be used for this purpose.

A Circular Economy Virtuous Example—Use of a Stabilized Waste Material Instead of Calcite to Produce Sustainable Composites

This work reports and analyzes the mechanical properties of some composites obtained using stabilized waste with epoxy resins E-227. For comparison, correspondent composite samples were realized using calcite as a filler. The recovered stabilized waste was obtained by means of a new method to stabilize municipal solid waste incineration (MSWI) fly ash (FA), based on the use of bottom ash (BA). The aim of this paper is to show that the stabilization process, which can be considered a zero—waste treatment, produces inert materials, that can be reused as a filler. The production of new filler was made on a pilot plant, designed to verify the transferability of the proposed stabilization technology. Mechanical analysis revealed that flexural modulus raises by increasing the filler content around 30% wt, independently of filler type, stabilized sample or calcium carbonate. Mechanical properties are lower in the samples with the high amount of filler due to the crowding effect. The morphology of composite materials showed a non-homogeneous dispersion of particles in stabilized sample filler, characterized by large particle agglomerates. Finally, according to the ESCAPE simplified method, the obtained composites result more sustainable in comparison with the corresponding ones produced by using natural resources (like calcite). These findings open new possibilities for the reuse of the stabilized material, in frame of circular economy principles, with environmental and economic advantages.

Oxalic acid activated phosphate rock and bone meal to immobilize Cu and Pb in mine soils

The contamination of soil by copper (Cu) and lead (Pb) is a serious concern because of its high health risk via the food chain. Oxalic acid-activated phosphate rock (APR) and bone meal (BM) were applied to Cu and Pb co-contaminated soil to investigate their efficacy in the immobilization of Cu and Pb. APR and BM were applied into the contaminated soil (158.8 mg/kg total Pb and 573.2 mg/kg Cu) at four levels of dosages (0.1%, 0.5%, 2%, and 4%) and incubated for one year. The results demonstrated that the acid exchangeable Pb fraction in the soil treated with APR and BM decreased compared to the control, while there was no noticeable change in the acid-exchangeable Cu fraction in the soil treated with either APR or BM. Meanwhile, the application of BM and APR increased the fraction of residual Cu and Pb in the polluted soils. Moreover, the addition of either APR or BM at the dose of 4% decreased the concentrations of CaCl₂-extractable Cu and Pb in the amended soil, and the percentages of that reduction in the APR amended soils were 56% and 91% and in BM amended soils were 67% and 64%, respectively. The immobilization of Cu and Pb by APR and BM might be induced by the increased soil pH and soluble P contents in the amended soils. In general, BM is more effective than APR on the immobilization of Cu in polluted soil, while APR had greater efficiency than BM on the immobilization of Pb when the levels of amendments were above 2%.

Assessment of Potential Toxic Metals in a Ramsar Wetland, Central Mexico and its Self-Depuration through Eichhornia crassipes

The Valsequillo reservoir is a Ramsar wetland due to its importance as a point of convergence of migratory waterfowl. It is located in Central Mexico and is currently endangered by the constant spill of municipal and industrial discharges from Puebla city. On this context, we evaluated thirteen potential toxic metals (PTMs) in water, Water hyacinth (E. crassipes) plants and sediments at this site. A combined number of 31 samples were collected from the study area. The degree/extent of metal contamination in sediments was assessed through different geochemical indexes, namely: Geoaccumulation index (Igeo), Enrichment Factor (EF) and Potential Ecological Risk Index (PERI). The ability of Water hyacinth plants residues as a phytodepurator in the Ramsar site was tested in terms of the bioaccumulation factor (BF) and the translocation factor (TF). The results concerning sediments showed that Pb, Cu and Hg pose a threat to the aquatic environment since Igeo and EF indicate sediments ranging from moderately contaminated to contaminated. Moreover, PERI pointed out Hg as the main contributor to the ecological risk in sediments, especially in the part of the reservoir covered by E. crassipes. Water hyacinth plants displayed good capacity to absorb PTMs from the water, since the content of Co, Zn, As, Ni, Cu, Pb, Ti, Cr, Ba, Mo and V in the total plant was (all values in mg/kg of dry weight) 21 ± 9, 408 ± 300, 12 ± 6, 93 ± 21, 93 ± 69, 53 ± 29, 1067 ± 643, 78 ± 55, 362 ± 39, 14 ± 0.6 and 96 ± 35, respectively. Metal content in sediments resembles to that of E. crassipes; especially in the roots, suggesting a constant deposition of plants at the bottom of the reservoir, which contributes to the eutrophication of the water. The present work encourages the need for a sustainable management of Water hyacinth plants in the Ramsar site, since they represent a plague and a natural phyto-depurator at the same time.

Enhanced Potential Toxic Metal Removal Using a Novel Hierarchical SiO2–Mg(OH)2 Nanocomposite Derived from Sepiolite

Clays are widely used as sorbents for heavy metals due to their high specific surface areas, low cost, and ubiquitous occurrence in most soil and sediment environments. However, the low loading capacity for heavy metals is one of their inherent limitations. In this work, a novel SiO2–Mg(OH)2 nanocomposite was successfully prepared via sequential acid–base modification of raw sepiolite. The structural characteristics of the resulting modified samples were characterized by a wide range of techniques including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and nitrogen physisorption analysis. The results show that a hierarchical nanocomposite constructed by loading the Mg(OH)2 nanosheets onto amorphous SiO2 nanotubes can be successfully prepared, and the nanocomposite has a high surface area (377.3 m2/g) and pore volume (0.96 cm3/g). Batch removal experiments indicate that the nanocomposite exhibits high removal efficiency toward Gd(III), Pb(II), and Cd(II), and their removal capacities were greatly enhanced in comparison with raw sepiolite, due to the synergistic effect of the different components in the hierarchical nanocomposite. This work can provide a novel route toward a hierarchical nanocomposite by using clay minerals as raw material. Taking into account the simplicity of the fabrication route and the high loading capacities for heavy metals, the developed nanocomposite also has great potential applications in water treatment.

New insights into chelator recycling by a chelating resin: From molecular mechanisms to applicability

As part of the project of developing a "green" and highly feasible soil remediation process, recycling an eco-friendly chelating agent, glycine, using Chelex-100 chelating resin, was studied. Two model complexes, copper and nickel glycinates, were tested under various conditions, including equivalent viscosity but different temperature conditions. Two similar complexes demonstrated very different reactivity towards Chelex-100. An in-depth study led to the discovery of unusual metal-dependent mechanisms of the complex-to-resin metal transfer. Particularly, nickel transfer proceeds via a dissociative mechanism, whereas copper transfer does not require pre-dissociation of the complexes, and proceeds via the associative ligand-exchange mechanism. Both processes result in the recovery of the used chelator. The glycine solution was applied on the spiked soil, then recovered on Chelex-100 resin and successfully reused, thus demonstrating a proof of the concept. These findings contribute to the science, strategies, and methodology of both water purification and chelator recycling fields.

Remediating Potentially Toxic Metal and Organic Co-Contamination of Soil by Combining In Situ Solidification/Stabilization and Chemical Oxidation: Efficacy, Mechanism, and Evaluation

Most soil remediation studies investigated single contaminants or multiple contaminants of the same type. However, in field conditions, soils are often contaminated with potentially both toxic metals and organic pollutants, posing a serious technical challenge. Here, batch experiments were conducted to evaluate the performance of combining in situ solidification/stabilization (ISS) and in situ chemical oxidation (ISCO) for the simultaneous removal of aniline (1000 mg/kg) and Cd (10 mg/kg). All four tested ISS amendments, especially quick lime and Portland cement, promoted in situ chemical oxidation with activated persulfate in contaminated soil. Combined ISS/ISCO remediation effectively removed aniline and reduced the bioavailable Cd content at optimal initial persulfate and ISS amendment concentrations of 1.08 mol/kg and 30 wt% with a seven-day curing time, and significantly reduced leaching. Persulfate inhibited the reduction of the bioavailable Cd content, and ISS amendment with persulfate did not synergistically remediate Cd in co-contaminated soil. Strong alkalinity and high temperature were the main mechanisms driving rapid pollutant removal and immobilization. The reaction of CaO with water released heat, and Ca(OH)₂ formation increased the pH. The relative contributions of heat vs. alkaline activation, as well as the contaminant removal efficiency, increased with ISS amendment CaO content. Combined treatment altered the soil physicochemical properties, and significantly increased Ca and S contents. Activated persulfate-related reactions did not negatively impact unconfined compressive strength and hydraulic conductivity. This work improves the selection of persulfate activation methods for the treatment of soils co-contaminated with both potentially toxic metals and organic pollutants.

Lead Ion Sorption by Perlite and Reuse of the Exhausted Material in the Construction Field

This paper deals with the possibility of using perlite as a lead ion sorbent from industrial wastewater. Dynamic (laboratory column) operations were carried-out using beads, which were percolated by metals in a 2–10 mg·L−1 concentration range. To this purpose, lead ion solutions were eluted in columns loaded with different amounts of sorbent (2–4 g) within a 1–2 mm bead size range, at 0.15–0.4 L·h−1 flow-rates. Tests were performed to complete sorbent exhaustion (column breakthrough). The highest retention was obtained at 0.3 L·h−1, with 4 g of perlite and 10 mg·L−1 of influent, lead ion concentration. Film diffusion control was the kinetic step of the process in the Nerst stationary film at the solid/liquid interface. At the end of the sorption, perlite beads were used as lightweight aggregates in the construction field (i.e., for the preparation of cement mortars). Specifically, conglomerates showing different weights and consequently different thermal insulating and mechanical properties were obtained, with potential applications in plaster or panels.

Ethylenediamine-N,N'-Disuccinic Acid (EDDS)-Enhanced Flushing Optimization for Contaminated Agricultural Soil Remediation and Assessment of Prospective Cu and Zn Transport

This paper presents the results of an experimental study aimed at investigating the effect of operative parameters on the efficiency of a soil flushing process, conducted on real contaminated soil containing high amounts of Cu and Zn. Soil flushing tests were carried out with Ethylenediamine-N,N'-disuccinic acid (EDDS) as a flushing agent due to its high biodegradability and environmentally friendly characteristics. Process parameters such as Empty-Bed Contact Time (EBCT) and EDDS solution molarity were varied from 21-33 h and from 0.36-3.6 mM, respectively. Effects on the mobility of cations such as Fe and Mn were also investigated. Results showed that very high performances can be obtained at [EDDS] = 3.6 mM and EBCT = 33 h. In these conditions, in fact, the amount of removed Cu was 53%, and the amount of removed Zn was 46%. Metal distribution at different depths from the top surface revealed that Cu has higher mobility than Zn. The process results were strongly dependent on the exchange of metals due to the different stability constants of the EDDS complexes. Finally, results from a comparative study showed that soil washing treatment reached the same removal efficiency of the flushing process in a shorter time but required a larger amount of the EDDS solution.