Resistance to integrase inhibitors

Decoupling HIV-1 antiretroviral drug inhibition from plasma antibody activity to evaluate broadly neutralizing antibody therapeutics and vaccines

The development of broadly neutralizing antibody (bnAb)-based therapeutic HIV-1 vaccines and cure concepts depends on monitoring bnAb plasma activity in people with HIV (PWH) on suppressive antiretroviral therapy (ART). To enable this, analytical strategies must be defined to reliably distinguish antibody-based neutralization from drug inhibition. Here, we explore strategies that either utilize drug-resistant viruses or remove drugs from plasma. We develop ART-DEX (ART dissociation and size exclusion), an approach which quantitatively separates drugs from plasma proteins following pH-triggered release allowing accurate definition of antibody-based neutralization. We demonstrate that ART-DEX, alone or combined with ART-resistant viruses, provides a highly effective and scalable means of assessing antibody neutralization during ART. Implementation of ART-DEX in standard neutralization protocols should be considered to enhance the analytical capabilities of studies evaluating bnAb therapeutics and therapeutic vaccines, furthering the development of advanced ART and HIV-1 cure strategies.

Target-based drug design strategies to overcome resistance to antiviral agents: opportunities and challenges

Viral infections have a major impact in human health. Ongoing viral transmission and escalating selective pressure have the potential to favor the emergence of vaccine- and antiviral drug-resistant viruses. Target-based approaches for the design of antiviral drugs can play a pivotal role in combating drug-resistant challenges. Drug design computational tools facilitate the discovery of novel drugs. This review provides a comprehensive overview of current drug design strategies employed in the field of antiviral drug resistance, illustrated through the description of a series of successful applications. These strategies include technologies that enhance compound-target affinity while minimizing interactions with mutated binding pockets. Furthermore, emerging approaches such as virtual screening, targeted protein/RNA degradation, and resistance analysis during drug design have been harnessed to curtail the emergence of drug resistance. Additionally, host targeting antiviral drugs offer a promising avenue for circumventing viral mutation. The widespread adoption of these refined drug design strategies will effectively address the prevailing challenge posed by antiviral drug resistance.

Two-Metal Ion-Dependent Enzymes as Potential Antiviral Targets in Human Herpesviruses

The majority of drug discovery efforts against herpesviruses have focused on nucleoside analogs that target viral DNA polymerases, agents that are associated with dose-limiting toxicity and/or a narrow spectrum of activity. We are pursuing a strategy based on targeting two-metal ion-dependent (TMID) viral enzymes. This family of enzymes consists of structurally related proteins that share common active sites containing conserved carboxylates predicted to coordinate divalent cations essential for catalysis. Compounds that target TMID enzymes, such as HIV integrase and influenza endoribonuclease, have been successfully developed for clinical use. HIV integrase inhibitors have been reported to inhibit replication of herpes simplex virus (HSV) and other herpesviruses; however, the molecular targets of their antiviral activities have not been identified. We employed a candidate-based approach utilizing several two-metal-directed chemotypes and the potential viral TMID enzymatic targets in an effort to correlate target-based activity with antiviral potency. The panel of compounds tested included integrase inhibitors, the anti-influenza agent baloxavir, three natural products previously shown to exhibit anti-HSV activity, and two 8-hydroxyquinolines (8-HQs), AK-157 and AK-166, from our in-house program. The integrase inhibitors exhibited weak overall anti-HSV-1 activity, while the 8-HQs were shown to inhibit both HSV-1 and cytomegalovirus (CMV). Target-based analysis demonstrated that none of the antiviral compounds acted by inhibiting ICP8, contradicting previous reports. On the other hand, baloxavir inhibited the proofreading exonuclease of HSV polymerase, while AK-157 and AK-166 inhibited the alkaline exonuclease UL12. In addition, AK-157 also inhibited the catalytic activity of the HSV polymerase, which provides an opportunity to potentially develop dual-targeting agents against herpesviruses. IMPORTANCE Human herpesviruses (HHVs) establish lifelong latent infections, which undergo periodic reactivation and remain a major cause of morbidity and mortality, especially in immunocompromised individuals. Currently, HHV infections are treated primarily with agents that target viral DNA polymerase, including nucleoside analogs; however, long-term treatment can be complicated by the development of drug resistance. New therapies with novel modes of action would be important not only for the treatment of resistant viruses but also for use in combination therapy to reduce dose-limiting toxicities and potentially eliminate infection. Since many essential HHV proteins are well conserved, inhibitors of novel targets would ideally exhibit broad-spectrum activity against multiple HHVs.

Structural Insights to Human Immunodeficiency Virus (HIV-1) Targets and Their Inhibition

Human immunodeficiency virus (HIV) is a deadly virus that attacks the body's immune system, subsequently leading to AIDS (acquired immunodeficiency syndrome) and ultimately death. Currently, there is no vaccine or effective cure for this infection; however, antiretrovirals that act at various phases of the virus life cycle have been useful to control the viral load in patients. One of the major problems with antiretroviral therapies involves drug resistance. The three-dimensional structure from crystallography studies are instrumental in understanding the structural basis of drug binding to various targets. This chapter provides key insights into different targets and drugs used in the treatment from a structural perspective. Specifically, an insight into the binding characteristics of drugs at the active and allosteric sites of different targets and the importance of targeting allosteric sites for design of new-generation antiretrovirals to overcome complex and resistant forms of the virus has been reviewed.

HIV-1 resistance patterns to integrase inhibitors in Chilean patients with virological failure on raltegravir-containing regimens

In this viewpoint we would like to describe our results in terms of resistance pattern in Chilean patients with virological failure (VF) on raltegravir (RAL)-containing-regimens and highlight the need for the concomitant availability of genotypic resistance testing to integrase strand transfer inhibitors (INSTIs) introduction in antiretroviral regimens, particularly in countries in South America. Indeed we found in our study the presence of two or more primary mutations in some of the participants which is associated with cross-resistance to all INSTIs. By using timely genotyping, we could optimally manage these patients, early after detection of VF.

Synthesis, Molecular Modelling and Biological Studies of 3-hydroxypyrane- 4-one and 3-hydroxy-pyridine-4-one Derivatives as HIV-1 Integrase Inhibitors

BACKGROUND

Despite the progress in the discovery of antiretroviral compounds for treating HIV-1 infection by targeting HIV integrase (IN), a promising and well-known drug target against HIV-1, there is a growing need to increase the armamentarium against HIV, for avoiding the drug resistance issue.

OBJECTIVE

To develop novel HIV-1 IN inhibitors, a series of 3-hydroxy-pyrane-4-one (HP) and 3- hydroxy-pyridine-4-one (HPO) derivatives have been rationally designed and synthesized.

METHODS

To provide a significant characterization of the novel compounds, in-depth computational analysis was performed using a novel HIV-1 IN/DNA binary 3D-model for investigating the binding mode of the newly conceived molecules in complex with IN. The 3D-model was generated using the proto-type foamy virus (PFV) DNA as a structural template, positioning the viral polydesoxyribonucleic chain into the HIV-1 IN homology model. Moreover, a series of in vitro tests were performed including HIV-1 activity inhibition, HIV-1 IN activity inhibition, HIV-1 IN strand transfer activity inhibition and cellular toxicity.

RESULTS

Bioassay results indicated that most of HP analogues including HPa, HPb, HPc, HPd, HPe and HPg, showed favorable inhibitory activities against HIV-1-IN in the low micromolar range. Particularly halogenated derivatives (HPb and HPd) offered the best biological activities in terms of reduced toxicity and optimum inhibitory activities against HIV-1 IN and HIV-1 in cell culture.

CONCLUSION

Halogenated derivatives, HPb and HPd, displayed the most promising anti-HIV profile, paving the way to the optimization of the presented scaffolds for developing new effective antiviral agents.

Spectrometric and computational studies of the binding of HIV-1 integrase inhibitors to viral DNA extremities

Three integrase strand transfer inhibitors are in intensive clinical use, raltegravir (RAL), elvitegravir (EVG) and dolutegravir (DTG). The onset of integrase resistance mutations limits their therapeutic efficiency. As put forth earlier, the drug affinity for the intasome could be improved by targeting preferentially the retroviral nucleobases, which are little, if at all, mutation-prone. We report experimental results of anisotropy fluorescence titrations of viral DNA by these three drugs. These show the DTG > EVG > RAL ranking of their inhibitory activities of the intasome to correspond to that of their free energies of binding, ∆Gs, to retroviral DNA, and that such a ranking is only governed by the binding enthalpies, ∆H, the entropy undergoing marginal variations. We sought whether this ranking might be reproduced through quantum chemistry (QC) Density Functional Theory calculations of intermolecular interaction energies between simplified models consisting of sole halobenzene ring and the highly conserved retroviral nucleobases G4 and C16. These calculations showed that binding of EVG has a small preference over DTG, while RAL ranked third. This indicates that additional interactions of the diketoacid parts of the drugs with DNA could be necessary to further enable preferential binding of DTG. The corresponding ∆Etotvalues computed with a polarizable molecular mechanics/dynamics procedure, Sum of Interactions Between Fragments Ab initio computed (SIBFA), showed good correlations with this ∆E(QC) ranking. These validations are an important step toward the use of polarizable molecular dynamics simulations on DTG or EVG derivatives in their complexes with the complete intasome, an application now motivated and enabled by the advent of currently developed and improved massively parallel software.

HIV-1 Integrase Inhibitors That Are Broadly Effective against Drug-Resistant Mutants

Integrase strand transfer inhibitors (INSTIs) have emerged as clinically effective therapeutics that inhibit HIV-1 replication by blocking the strand transfer reaction catalyzed by HIV-1 integrase (IN). Of the three FDA-approved INSTIs, dolutegravir (DTG) is the least apt to select for resistance. However, recent salvage therapy regimens had low response rates with therapies that included DTG, suggesting that DTG resistance can be selected in patients. Using a single-round infection assay, we evaluated a collection of our best inhibitors and DTG against a broad panel of INSTI-resistant mutants. Two of the new compounds, 4c and 4d, had antiviral profiles against the mutants we tested superior to that of DTG. The susceptibility profiles of 4c and 4d suggest that the compounds are candidates for development as INSTIs. Modeling the binding of 4d to HIV-1 IN reinforced the significance of mimicking the DNA substrate in developing compounds that are broadly effective in their abilities to inhibit HIV-1 INs with mutations in the active site.

Efficacies of Cabotegravir and Bictegravir against drug-resistant HIV-1 integrase mutants

Background

Integrase strand transfer inhibitors (INSTIs) are the class of antiretroviral (ARV) drugs most recently approved by the FDA for the treatment of HIV-1 infections. INSTIs block the strand transfer reaction catalyzed by HIV-1 integrase (IN) and have been shown to potently inhibit infection by wild-type HIV-1. Of the three current FDA-approved INSTIs, Dolutegravir (DTG), has been the most effective, in part because treatment does not readily select for resistant mutants. However, recent studies showed that when INSTI-experienced patients are put on a DTG-salvage therapy, they have reduced response rates. Two new INSTIs, Cabotegravir (CAB) and Bictegravir (BIC), are currently in late-stage clinical trials.

Results

Both CAB and BIC had much broader antiviral profiles than RAL and EVG against the INSTI-resistant single, double, and triple HIV-1 mutants used in this study. BIC was more effective than DTG against several INSTI-resistant mutants. Overall, in terms of their ability to inhibit a broad range of INSTI-resistant IN mutants, BIC was superior to DTG, and DTG was superior to CAB. Modeling the binding of CAB, BIC, and DTG within the active site of IN suggested that the “left side” of the INSTI pharmacophore (the side away from the viral DNA) was important in determining the ability of the compound to inhibit the IN mutants we tested.

Conclusions

Of the two INSTIs in late stage clinical trials, BIC appears to be better able to inhibit the replication of a broad range of IN mutants. BIC retained potency against several of the INSTI-resistant mutants that caused a decrease in susceptibility to DTG.

Electronic supplementary material

The online version of this article (10.1186/s12977-018-0420-7) contains supplementary material, which is available to authorized users.

The inhibition process of HIV-1 integrase by diketoacids molecules: Understanding the factors governing the better efficiency of dolutegravir

The Human Immunodeficiency Virus-1 integrase is responsible for the covalent insertion of a newly synthesized double-stranded viral DNA into the host cells, and is an emerging target for antivirus drug design. Raltegravir (RAL) and elvitegravir (EVG) are the first two integrase strand transfer inhibitors used in therapy. However, treated patients eventually develop detrimental resistance mutations. By contrast, a recently approved drug, dolutegravir (DTG), presents a high barrier to resistance. This study aims to understand the increased efficiency of DTG upon focusing on its interaction properties with viral DNA. The results showed DTG to be involved in more extended interactions with viral DNA than EVG. Such interactions involve the halobenzene and scaffold of DTG and EVG and bases 5'G^-43', 3'A³5'and 3'C⁴5'.

Randomized Trial of Food Effect on Pharmacokinetic Parameters of ABX464 Administered Orally to Healthy Male Subjects

ABX464 is an antiviral that provides a novel approach to the reduction and control of HIV infection. Investigation of food influence is important in the optimization of treatment. An open-label, food effect, randomized study which included 2 groups of 24 subjects each was carried out to assess the bioavailability and safety of single (group 1) and repeated (group 2) oral doses of ABX464 (50 mg) under fed or fasted conditions. The maximum concentration (Cmax) and the area under the concentration-time curve from time zero to infinity (AUC0-∞) of ABX464 were demonstrated to increase with food after a single dose of ABX464 (219% and 188%, respectively). The apparent terminal elimination half-lives (t1/2s) under fed and fasted conditions were comparable, at about 0.80 h. The median time to maximum concentration (Tmax) was delayed from 1.5 to 2.8 h, and the ratio of the AUC0-∞ obtained under fed conditions to the AUC0-∞ obtained under fasted conditions (Frel) was 2.69. Comparable results were obtained on day 1 and day 10 in group 2. The increases in Cmax and AUC0-∞ of the metabolite ABX464-N-glucuronide (ABX464-NGlc) were, however, much more limited when ABX464 was given with food. The t1/2s were also comparable under the two conditions (around 100 h). Between day 1 and day 10, the Cmax increased by 5% under the fasted condition and by 25% under the fed condition. The most common related treatment-emergent adverse events were headaches, vomiting, and nausea. It was concluded that food has a significant impact on the levels of ABX464 in plasma with a delay in absorption and increased relative bioavailability, with a lesser impact on its biotransformation into ABX464-NGlc. ABX464 was well tolerated under both fasted and fed conditions. (This study has been registered at ClinicalTrials.gov under registration no. NCT02731885.).

Development of a phenotypic susceptibility assay for HIV-1 integrase inhibitors

Phenotypic resistance analysis is an indispensable method for determination of HIV-1 resistance and cross-resistance to novel drug compounds. Since integrase inhibitors are essential components of recent antiretroviral combination therapies, phenotypic resistance data, in conjunction with the corresponding genotypes, are needed for improving rules-based and data-driven tools for resistance prediction, such as HIV-Grade and geno2pheno_[integrase]. For generation of phenotypic resistance data to recent integrase inhibitors, a recombinant phenotypic integrase susceptibility assay was established. For validation purposes, the phenotypic resistance to raltegravir, elvitegravir and dolutegravir of nine subtype-B virus strains, isolated from integrase inhibitor-naïve and raltegravir-treated patients was determined. Genotypic resistance analysis identified four virus strains harbouring RAL resistance-associated mutations. Phenotypic resistance analysis was performed as follows. The HIV-1 integrase genes were cloned into a modified pNL4-3 vector and transfected into 293T cells for the generation of recombinant virus. The integrase-inhibitor susceptibility of the recombinant viruses was determined via an indicator cell line. While raltegravir resistance profiles presented a high cross-resistance to elvitegravir, dolutegravir maintained in-vitro activity in spite of the Y143R and N155H mutations, confirming the strong activity of dolutegravir against raltegravir-resistant viruses. Solely a Q148H+G140S variant presented reduced susceptibility to dolutegravir. In conclusion, our phenotypic susceptibility assay permits resistance analysis of the integrase gene of patient-derived viruses for integrase inhibitors by replication-competent recombinants. Thus, this assay can be used to analyze phenotypic drug resistance of integrase inhibitors in vitro. It provides the possibility to determine the impact of newly appearing mutational patterns to drug resistance of recent integrase inhibitors.

New insights into the interaction between pyrrolyl diketoacids and HIV-1 integrase active site and comparison with RNase H

HIV-1 integrase (IN) inhibitors are one of the most recent innovations in the treatment of HIV infection. The selection of drug resistance viral strains is however a still open issue requiring constant efforts to identify new anti-HIV-1 drugs. Pyrrolyl diketo acid (DKA) derivatives inhibit HIV-1 replication by interacting with the Mg²⁺ cofactors within the HIV-1 IN active site or within the HIV-1 reverse-transcriptase associated ribonuclease H (RNase H) active site. While the interaction mode of pyrrolyl DKAs with the RNase H active site has been recently reported and substantiated by mutagenesis experiments, their interaction within the IN active site still lacks a detailed understanding. In this study, we investigated the binding mode of four pyrrolyl DKAs to the HIV-1 IN active site by molecular modeling coupled with site-directed mutagenesis studies showing that the DKA pyrrolyl scaffold primarily interacts with the IN amino residues P145, Q146 and Q148. Importantly, the tested DKAs demonstrated good effectiveness against HIV-1 Raltegravir resistant Y143A and N155H INs, thus showing an interaction pattern with relevant differences if compared with the first generation IN inhibitors. These data provide precious insights for the design of new HIV inhibitors active on clinically selected Raltegravir resistant variants. Furthermore, this study provides new structural information to modulate IN and RNase H inhibitory activities for development of dual-acting anti-HIV agents.

Synthesis and Anti-HIV-1 Activity Evaluation for Novel 3a,6a-Dihydro-1H-pyrrolo[3,4-c]pyrazole-4,6-dione Derivatives

The search for new molecular constructs that resemble the critical two-metal binding pharmacophore and the halo-substituted phenyl functionality required for HIV-1 integrase (IN) inhibition represents a vibrant area of research within drug discovery. As reported herein, we have modified our recently disclosed 1-[2-(4-fluorophenyl)ethyl]-pyrrole-2,5-dione scaffolds to design 35 novel compounds with improved biological activities against HIV-1. These new compounds show single-digit micromolar antiviral potencies against HIV-1 and low toxicity. Among of them, compound 9g and 15i had potent anti-HIV-1 activities (EC₅₀ < 5 μM) and excellent therapeutic index (TI, CC₅₀/EC₅₀ > 100). These two compounds have potential as lead compounds for further optimization into clinical anti-HIV-1 agents.

Therapy-Emergent Drug Resistance to Integrase Strand Transfer Inhibitors in HIV-1 Patients: A Subgroup Meta-Analysis of Clinical Trials

BACKGROUND

Integrase strand transfer inhibitors (INSTIs) are a novel class of anti-HIV agents that show high activity in inhibiting HIV-1 replication. Currently, licensed INSTIs include raltegravir (RAL), elvitegravir (EVG) and dolutegravir (DTG); these drugs have played a critical role in AIDS therapy, serving as additional weapons in the arsenal for treating patients infected with HIV-1. To date, long-term data regarding clinical experience with INSTI use and the emergence of resistance remain scarce. However, the literature is likely now sufficiently comprehensive to warrant a meta-analysis of resistance to INSTIs.

METHODS

Our team implemented a manuscript retrieval protocol using Medical Subject Headings (MeSH) via the Web of Science, MEDLINE, EMBASE, and Cochrane Central Register of Controlled Trials databases. We screened the literature based on inclusion and exclusion criteria and then performed a quality analysis and evaluation using RevMan software, Stata software, and the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE). We also performed a subgroup analysis. Finally, we calculated resistance rates and risk ratios (RRs) for the three types of drugs.

RESULTS

We identified 26 references via the database search. A meta-analysis of the RAL data revealed that the resistance rate was 3.9% (95% CI = 2.9%-4.9%) for the selected randomized controlled trials (RCTs). However, the RAL resistance rate reached 40.9% (95% CI = 8.8%-72.9%) for the selected observational studies (OBSs). The rates of resistance to RAL that were associated with HIV subtypes A, B, and C as well as with more complex subtypes were 0.1% (95% CI = -0.7%-0.9%), 2.5% (95% CI = 0.5%-4.5%), 4.6% (95% CI = 2.7%-6.6%) and 2.2% (95% CI = 0.7%-3.7%), respectively. The rates of resistance to EVG and DTG were 1.2% (95% CI = 0.2%-2.2%) and 0.1% (95% CI = -0.2%-0.5%), respectively. Furthermore, we found that the RRs for antiviral resistance were 0.414 (95% CI = 0.210-0.816) between DTG and RAL and 0.499 (95% CI = 0.255-0.977) between EVG and RAL. When RAL was separately co-administered with nuclear nucleoside reverse transcriptase inhibitors (NRTIs) or protease inhibitors (PIs), the rates of resistance to RAL were 0.2% (95% CI = -0.1%-0.5%) and 0.2% (95% CI = -0.2%-0.6%), respectively. The ten major integrase mutations (including N155H, Y143C/R, Q148H/R, Y143Y/H, L74L/M, E92Q, E138E/A, Y143C, Q148Q and Y143S) can reduce the sensitivity of RAL and EVG. The resistance of DTG is mainly shown in 13 integrase mutations (including T97T/A, E138E/D, V151V/I, N155H, Q148, Y143C/H/R, T66A and E92Q).

CONCLUSIONS

Our results reveal that the DTG resistance rate was lower than the RAL resistance rate in a head-to-head comparison. Moreover, we confirmed that the EVG resistance rate was lower than the RAL resistance rate. In addition, our results revealed that the resistance rate of RAL was lower than that of efavirenz. The rates of resistance to RAL, EVG and DTG were specifically 3.9%, 1.2% and 0.1%, respectively. Compared with other types of antiviral drugs, the rates of resistance to INSTIs are generally lower. Unfortunately, the EVG and DTG resistance rates could not be compared because of a lack of data.

Selectivity for strand-transfer over 3'-processing and susceptibility to clinical resistance of HIV-1 integrase inhibitors are driven by key enzyme-DNA interactions in the active site

Integrase strand transfer inhibitors (INSTIs) are highly effective against HIV infections. Co-crystal structures of the prototype foamy virus intasome have shown that all three FDA-approved drugs, raltegravir (RAL), elvitegravir and dolutegravir (DTG), act as interfacial inhibitors during the strand transfer (ST) integration step. However, these structures give only a partial sense for the limited inhibition of the 3′-processing reaction by INSTIs and how INSTIs can be modified to overcome drug resistance, notably against the G140S-Q148H double mutation. Based on biochemical experiments with modified oligonucleotides, we demonstrate that both the viral DNA +1 and −1 bases, which flank the 3′-processing site, play a critical role for 3′-processing efficiency and inhibition by RAL and DTG. In addition, the G140S-Q148H (SH) mutant integrase, which has a reduced 3′-processing activity, becomes more active and more resistant to inhibition of 3′-processing by RAL and DTG in the absence of the −1 and +1 bases. Molecular modeling of HIV-1 integrase, together with biochemical data, indicate that the conserved residue Q146 in the flexible loop of HIV-1 integrase is critical for productive viral DNA binding through specific contacts with the virus DNA ends in the 3′-processing and ST reactions. The potency of integrase inhibitors against 3′-processing and their ability to overcome resistance is discussed.

3-Hydroxypyrimidine-2,4-dione-5-N-benzylcarboxamides Potently Inhibit HIV-1 Integrase and RNase H

Resistance selection by human immunodeficiency virus (HIV) toward known drug regimens necessitates the discovery of structurally novel antivirals with a distinct resistance profile. On the basis of our previously reported 3-hydroxypyrimidine-2,4-dione (HPD) core, we have designed and synthesized a new integrase strand transfer (INST) inhibitor type featuring a 5-N-benzylcarboxamide moiety. Significantly, the 6-alkylamino variant of this new chemotype consistently conferred low nanomolar inhibitory activity against HIV-1. Extended antiviral testing against a few raltegravir-resistant HIV-1 clones revealed a resistance profile similar to that of the second generation INST inhibitor (INSTI) dolutegravir. Although biochemical testing and molecular modeling also strongly corroborate the inhibition of INST as the antiviral mechanism of action, selected antiviral analogues also potently inhibited reverse transcriptase (RT) associated RNase H, implying potential dual target inhibition. In vitro ADME assays demonstrated that this novel chemotype possesses largely favorable physicochemical properties suitable for further development.

A targeted DNA substrate mechanism for the inhibition of HIV-1 integrase by inhibitors with antiretroviral activity

We recently reported that viral DNA could be the primary target of raltegravir (RAL), an efficient anti‐HIV‐1 drug, which acts by inhibiting integrase. To elucidate this mechanism, we conducted a comparative analysis of RAL and TB11, a diketoacid abandoned as an anti‐HIV‐1 drug for its weak efficiency and marked toxicity, and tested the effects of the catalytic cofactor Mg²⁺ (5 mm) on drug‐binding properties. We used circular dichroism and fluorescence to determine drug affinities for viral DNA long terminal repeats (LTRs) and peptides derived from the integrase active site and DNA retardation assays to assess drug intercalation into DNA base pairs. We found that RAL bound more tightly to LTR ends than did TB11 (a diketo acid bearing an azido group) and that Mg²⁺ significantly increased the affinity of both RAL and TB11. We also observed a good relationship between drug binding with processed LTR and strand transfer inhibition. This unusual type of inhibition was caused by Mg²⁺‐assisted binding of drugs to DNA substrate, rather than to enzyme. Notably, while RAL bound exclusively to the cleavable/cleaved site, TB11 further intercalated into DNA base pairs and interacted with the integrase‐derived peptides. These unwanted binding sites explain the weaker bioavailability and higher toxicity of TB11 compared with the more effective RAL.

2-hydroxyisoquinoline-1,3(2H,4H)-diones (HIDs) as human immunodeficiency virus type 1 integrase inhibitors: Influence of the alkylcarboxamide substitution of position 4

Herein, we report further insight into the biological activities displayed by the 2-hydroxyisoquinoline-1,3(2H,4H)-dione (HID) scaffold. Previous studies have evidenced the marked fruitful effect of substitution of this two-metal binding pharmacophore at position 4 by phenyl and benzyl carboxamido chains. Strong human immunodeficiency virus type 1 integrase (HIV-1 IN) inhibitors in the low nanomolar range with micromolar (even down to low nanomolar) anti-HIV activities were obtained. Keeping this essential 4-carboxamido function, we investigated the influence of the replacement of phenyl and benzyl groups by various alkyl chains. This study shows that the recurrent halogenobenzyl pharmacophore found in the INSTIs can be efficiently replaced by an n-alkyl group. With an optimal length of six carbons, we observed a biological profile and a high barrier to resistance equivalent to those of a previously reported hit compound bearing a 4-fluorobenzyl group.

Comparison of Newly Assembled Full Length HIV-1 Integrase With Prototype Foamy Virus Integrase: Structure-Function Prospective

Background

Drug design against human immunodeficiency virus type 1 (HIV-1) integrase through its mechanistic study is of great interest in the area in biological research. The main obstacle in this area is the absence of the full-length crystal structure for HIV-1 integrase to be used as a model. A complete structure, similar to HIV-1 of a prototype foamy virus integrase in complex with DNA, including all conservative residues, is available and has been extensively used in recent investigations.

Objectives

The aim of this study was to determine whether the above model is precisely representative of HIV-1 integrase. This would critically determine the success of any designed drug using the model in deactivation of integrase and AIDS treatment.

Materials and Methods

Primarily, a new structure for HIV-1 was constructed, using a crystal structure of prototype foamy virus as the starting structure. The constructed structure of HIV-1 integrase was simultaneously simulated with a prototype foamy virus integrase on a separate occasion.

Results

Our results indicate that the HIV-1 system behaves differently from the prototype foamy virus in terms of folding, hydration, hydrophobicity of binding site and stability.

Conclusions

Based on our findings, we can conclude that HIV-1 integrase is vastly different from the prototype foamy virus integrase and does not resemble it, and the modeling output of the prototype foamy virus simulations could not be simply generalized to HIV-1 integrase. Therefore, our HIV-1 model seems to be more representative and more useful for future research.

Inhibition of HIV Expression and Integration in Macrophages by Methylglyoxal-Bis-Guanylhydrazone

Macrophages are a target for infection with HIV and represent one of the viral reservoirs that are relatively resistant to current antiretroviral drugs. Here we demonstrate that methylglyoxal-bis-guanylhydrazone (MGBG), a polyamine analog and potent S-adenosylmethionine decarboxylase inhibitor, decreases HIV expression in monocytes and macrophages. MGBG is selectively concentrated by these cells through a mechanism consistent with active transport by the polyamine transporter. Using a macrophage-tropic reporter virus tagged with the enhanced green fluorescent protein, we demonstrate that MGBG decreases the frequency of HIV-infected cells. The effect is dose dependent and correlates with the production of HIV p24 in culture supernatants. This anti-HIV effect was further confirmed using three macrophage-tropic primary HIV isolates. Viral life cycle mapping studies show that MGBG inhibits HIV DNA integration into the cellular DNA in both monocytes and macrophages.

IMPORTANCE

Our work demonstrates for the first time the selective concentration of MGBG by monocytes/macrophages, leading to the inhibition of HIV-1 expression and a reduction in proviral load within macrophage cultures. These results suggest that MGBG may be useful in adjunctive macrophage-targeted therapy for HIV infection.

Synthesis, biological evaluation and molecular docking of calix[4]arene-based β-diketo derivatives as HIV-1 integrase inhibitors

In this publication, we design and report the synthesis of calix[4]arene-based β-diketo derivatives as novel HIV-1 integrase (IN) inhibitors. The target compounds were obtained using Claisen condensation, and their structures were characterized by NMR and ESI-MS. Preliminary bioassays showed that calix[4]arene-based β-diketo derivatives inhibit strand transfer (ST) with IC50 values between 5.9 and 21.2 µM. Docking studies revealed the predominant binding modes that were distinct from the binding modes of raltegravir, which suggests a novel binding region in the IN active site. Moreover, these compounds are predicted not to interact with some of the key amino acids (GLN148 and ASN155) implicated in viral resistance. Therefore, this series of compounds can further be investigated for a possible chemotype to circumvent resistance to clinical HIV-1 IN inhibitors.

Resistance analyses of integrase strand transfer inhibitors within phase 3 clinical trials of treatment-naive patients

The integrase (IN) strand transfer inhibitors (INSTIs), raltegravir (RAL), elvitegravir (EVG) and dolutegravir (DTG), comprise the newest drug class approved for the treatment of HIV-1 infection, which joins the existing classes of reverse transcriptase, protease and binding/entry inhibitors. The efficacy of first-line regimens has attained remarkably high levels, reaching undetectable viral loads in 90% of patients by Week 48; however, there remain patients who require a change in regimen due to adverse events, virologic failure with emergent resistance or other issues of patient management. Large, randomized clinical trials conducted in antiretroviral treatment-naive individuals are required for drug approval in this population in the US, EU and other countries, with the primary endpoint for virologic success at Week 48. However, there are differences in the definition of virologic failure and the evaluation of drug resistance among the trials. This review focuses on the methodology and tabulation of resistance to INSTIs in phase 3 clinical trials of first-line regimens and discusses case studies of resistance.

Prevalence of primary resistance mutations to integrase inhibitors in treatment-naïve and -experienced patients infected with B and non-B HIV-1 variants

BACKGROUND

Raltegravir (RAL) constitutes the first available integrase strand transfer inhibitor (INSTI) available in clinical practice. Three independent pathways have been described to confer resistance to RAL. Secondary mutations with little effect on INSTI susceptibility and additional substitutions with an uncertain role have also been described especially in HIV-1 non-B variants.

METHODS

We evaluated the prevalence of primary, secondary, and additional resistance mutations to INSTIs in patients naïve to RAL or elvitegravir (EGV) carrying different HIV-1 variants.

RESULTS

A total of 83 patients infected by B HIV-1 subtype (64%) or non-B HIV-1 variants (36%) were evaluated. No primary mutations to RAL or EGV were found in the inte-grase sequences analyzed. Secondary mutations were detected in only 5 patients. Additional mutations were found in both in B and non-B variants. According to the geno2pheno algorithm, some of the secondary mutations detected (L74V, E138K, G163RS, and V151I) have been associated with a reduced estimated susceptibility to RAL and only the E138K mutation has been associated with a decreased estimated susceptibility to EGV. No virological failure was observed after RAL was administrated in 17 patients carrying 1 or more additional substitutions in the absence of primary or secondary mutations.

CONCLUSIONS

No primary resistance mutations to INSTI were found in treatment-naïve or -experienced patients infected with B or non-B HIV-1 variants. The vast majority had some polymorphic and non-polymorphic substitutions; however response to RAL was excellent in patients who harbored one or more of these mutations. We could not identify any clinical factors associated with the presence of any of these mutations.

Bicyclic 1-hydroxy-2-oxo-1,2-dihydropyridine-3-carboxamide-containing HIV-1 integrase inhibitors having high antiviral potency against cells harboring raltegravir-resistant integrase mutants

Integrase (IN) inhibitors are the newest class of antiretroviral agents developed for the treatment of HIV-1 infections. Merck’s Raltegravir (RAL) (October 2007) and Gilead’s Elvitegravir (EVG) (August 2012), which act as IN strand transfer inhibitors (INSTIs), were the first anti-IN drugs to be approved by the FDA. However, the virus develops resistance to both RAL and EVG, and there is extensive cross-resistance to these two drugs. New “2nd-generation” INSTIs are needed that will have greater efficacy against RAL- and EVG-resistant strains of IN. The FDA has recently approved the first second generation INSTI, GSK’s Dolutegravir (DTG) (August 2013). Our current article describes the design, synthesis, and evaluation of a series of 1,8-dihydroxy-2-oxo-1,2-dihydroquinoline-3-carboxamides, 1,4-dihydroxy-2-oxo-1,2-dihydro-1,8-naphthyridine-3-carboxamides, and 1-hydroxy-2-oxo-1,2-dihydro-1,8-naphthyridine-3-carboxamides. This resulted in the identification of noncytotoxic inhibitors that exhibited single digit nanomolar EC₅₀ values against HIV-1 vectors harboring wild-type IN in cell-based assays. Importantly, some of these new inhibitors retain greater antiviral efficacy compared to that of RAL when tested against a panel of IN mutants that included Y143R, N155H, G140S/Q148H, G118R, and E138K/Q148K.

Past and future. Current drugs targeting HIV-1 integrase and reverse transcriptase-associated ribonuclease H activity: single and dual active site inhibitors

Catalytic HIV type-1 (HIV-1) integrase (IN) and ribonuclease H (RNase H) domains belong to the polynucleotidyl transferase superfamily and are characterized by highly conserved motifs that coordinate two divalent Mg(2+) cations and are attractive targets for new antiviral agents. Several structural features of both domains are now available. Drugs targeting the HIV-1 IN are currently approved for anti-HIV therapy, while no drug targeting the HIV-1 RNase H function is yet available. This review describes HIV-1 IN and the RNase H function and structures, compounds targeting their active sites and dual inhibition as a new approach for drug development.

Computational design of a full-length model of HIV-1 integrase: modeling of new inhibitors and comparison of their calculated binding energies with those previously studied

A full-length model of integrase (IN) of the human immunodeficiency virus type 1 (HIV-1) was constructed based on the distinctly resolved X-ray crystal structures of its three domains, named N-terminal, catalytic core and C-terminal. Thirty-one already known inhibitors with varieties of structural differences as well as nine newly tested ones were docked into the catalytic core. The molecular dynamic (MD) and binding properties of these complexes were obtained by MD calculations. The binding energies calculated by molecular mechanic/Poisson Boltzmann solvation area were significantly correlationed with available IC50. Four inhibitors including two newly designed were also docked into the full-length model and their MD behaviors and binding properties were calculated. It was found that one of the newly designed compounds forms a better complex with HIV-1 IN compared to the rest including raltegravir. MD calculations were performed with AMBER suite of programs using ff99SB force field for the proteins and the general Amber force field for the ligands. In conclusion, the results have produced a promising standpoint not only in the construction of the full-length model but also in development of new drugs against it. However, the role of multimer formation and the involvement of DNAs, and their subsequent effect on the complexation and inhibition, are required to arrive at a conclusive decision.

Minimal sequence variability of the region of HIV-1 integrase targeted by the Abbott RealTime HIV-1 viral load assay in clinical specimens with reduced susceptibility to raltegravir

The Abbott RealTime (ART) HIV-1 assay targets the integrase region and is designed to tolerate mismatches. Variability in integrase sequences comprising the assay target regions from >1000 clinical specimens submitted for phenotypic and genotypic raltegravir resistance testing were analyzed. In this large collection of sequences from clinical specimens, the number and location of raltegravir resistance associated mutations did not differ from those tested previously and shown not to result in under-estimation of viral loads.

Binding mode prediction of biologically active compounds from plant Salvia Miltiorrhiza as integrase inhibitor

Integrase (IN), an essential enzyme for HIV-1 replication, has been targeted in antiretroviral drug therapy. The emergence of HIV-1 variants clinically resistant to antiretroviral agents has lead to the development of alternative IN inhibitors. In the present work, binding modes of a high potent IN inhibitor, M522 and M532, within the catalytic binding site of wild type (WT) IN were determined using molecular docking calculation. Both M522 and M532 displayed similar modes of binding within the IN putative binding pocket and exhibited favorable interactions with the catalytic Mg(2+) ions, the nearby amino acids and viral DNA through metal-ligand chelation, hydrogen bonding and π-π stacking interactions. Furthermore, the modes of action of these two compounds against the mutated Y212R, N224H and S217H PFV IN were also predicted. Although the replacement of amino acid could somehow disturb inhibitor binding mode, almost key interactions which detected in the WT complexes were fairly conserved. Detailed information could highlight the application of M522 and M532 as candidate IN inhibitors for drug development against drug resistant strains.

Sequence conservation of the region targeted by the Abbott RealTime HBV viral load assay in clinical specimens

The Abbott RealTime HBV assay targets the N-terminal region of the S gene. Here we analyzed the sequence variability of the assay target region from >2,100 clinical specimens. Thermodynamic modeling of the percentage of bound primer/probe at the assay annealing temperature was performed to assess the potential effect of sequence variability.

Activities, crystal structures, and molecular dynamics of dihydro-1H-isoindole derivatives, inhibitors of HIV-1 integrase

On the basis of a series of lactam and phthalimide derivatives that inhibit HIV-1 integrase, we developed a new molecule, XZ-259, with biochemical and antiviral activities comparable to raltegravir. We determined the crystal structures of XZ-259 and four other derivatives in complex with the prototype foamy virus intasome. The compounds bind at the integrase-Mg(2+)-DNA interface of the integrase active site. In biochemical and antiviral assays, XZ-259 inhibits raltegravir-resistant HIV-1 integrases harboring the Y143R mutation. Molecular modeling is also presented suggesting that XZ-259 can bind in the HIV-1 intasome with its dimethyl sulfonamide group adopting two opposite orientations. Molecular dynamics analyses of the HIV-1 intasome highlight the importance of the viral DNA in drug potency.

Prevalent polymorphisms in wild-type HIV-1 integrase are unlikely to engender drug resistance to dolutegravir (S/GSK1349572)

The majority of HIV-1 integrase amino acid sites are highly conserved, suggesting that most are necessary to carry out the critical structural and functional roles of integrase. We analyzed the 34 most variable sites in integrase (>10% variability) and showed that prevalent polymorphic amino acids at these positions did not affect susceptibility to the integrase inhibitor dolutegravir (S/GSK1349572), as demonstrated both in vitro (in site-directed mutagenesis studies) and in vivo (in a phase IIa study of dolutegravir monotherapy in HIV-infected individuals). Ongoing clinical trials will provide additional data on the virologic activity of dolutegravir across subject viruses with and without prevalent polymorphic substitutions.

Quantitative prediction of integrase inhibitor resistance from genotype through consensus linear regression modeling

BACKGROUND

Integrase inhibitors (INI) form a new drug class in the treatment of HIV-1 patients. We developed a linear regression modeling approach to make a quantitative raltegravir (RAL) resistance phenotype prediction, as Fold Change in IC50 against a wild type virus, from mutations in the integrase genotype.

METHODS

We developed a clonal genotype-phenotype database with 991 clones from 153 clinical isolates of INI naïve and RAL treated patients, and 28 site-directed mutants.We did the development of the RAL linear regression model in two stages, employing a genetic algorithm (GA) to select integrase mutations by consensus. First, we ran multiple GAs to generate first order linear regression models (GA models) that were stochastically optimized to reach a goal R2 accuracy, and consisted of a fixed-length subset of integrase mutations to estimate INI resistance. Secondly, we derived a consensus linear regression model in a forward stepwise regression procedure, considering integrase mutations or mutation pairs by descending prevalence in the GA models.

RESULTS

The most frequently occurring mutations in the GA models were 92Q, 97A, 143R and 155H (all 100%), 143G (90%), 148H/R (89%), 148K (88%), 151I (81%), 121Y (75%), 143C (72%), and 74M (69%). The RAL second order model contained 30 single mutations and five mutation pairs (p < 0.01): 143C/R&97A, 155H&97A/151I and 74M&151I. The R2 performance of this model on the clonal training data was 0.97, and 0.78 on an unseen population genotype-phenotype dataset of 171 clinical isolates from RAL treated and INI naïve patients.

CONCLUSIONS

We describe a systematic approach to derive a model for predicting INI resistance from a limited amount of clonal samples. Our RAL second order model is made available as an Additional file for calculating a resistance phenotype as the sum of integrase mutations and mutation pairs.

HIV integrase inhibitors: 20-year landmark and challenges

Since the discovery of HIV as the cause for AIDS 30 years ago, major progress has been made, including the discovery of drugs that now control the disease. Here, we review the integrase (IN) inhibitors from the discovery of the first compounds 20 years ago to the approval of two highly effective IN strand transfer inhibitors (INSTIs), raltegravir (Isentress) and elvitegravir (Stribild), and the promising clinical activity of dolutegravir. After summarizing the molecular mechanism of action of the INSTIs as interfacial inhibitors, we discuss the remaining challenges. Those include: overcoming resistance to clinical INSTIs, long-term safety of INSTIs, cost of therapy, place of the INSTIs in prophylactic treatments, and the development of new classes of inhibitors (the LEDGINs) targeting IN outside its catalytic site. We also discuss the role of chromatin and host DNA repair factor for the completion of integration.

6,7-Dihydroxy-1-oxoisoindoline-4-sulfonamide-containing HIV-1 integrase inhibitors

Although an extensive body of scientific and patent literature exists describing the development of HIV-1 integrase (IN) inhibitors, Merck's raltegravir and Gilead's elvitegravir remain the only IN inhibitors FDA-approved for the treatment of AIDS. The emergence of raltegravir-resistant strains of HIV-1 containing mutated forms of IN underlies the need for continued efforts to enhance the efficacy of IN inhibitors against resistant mutants. We have previously described bicyclic 6,7-dihydroxyoxoisoindolin-1-ones that show good IN inhibitory potency. This report describes the effects of introducing substituents into the 4- and 5-positions of the parent 6,7-dihydroxyoxoisoindolin-1-one platform. We have developed several sulfonamide-containing analogs that enhance potency in cell-based HIV assays by more than two orders-of-magnitude and we describe several compounds that are more potent than raltegravir against the clinically relevant Y143R IN mutant.

Genetic diversity and naturally polymorphisms in HIV type 1 integrase isolates from Maputo, Mozambique: implications for integrase inhibitors

HIV proviral DNA integration into the host chromosome is carried out by integrase becoming an important target antiretroviral therapy. Raltegravir was the first integrase inhibitor approved for use in HIV therapy and elvitegravir is in the late phase of clinical development; both show good results in monotherapy studies and may be used worldwide for rescue therapy. In this work we analyzed 57 integrase sequences obtained from samples from drug-naive and first line regime-failing patients from Maputo, Mozambique, to evaluate the presence of natural polymorphisms and resistance mutations associated with raltegravir and elvitegravir. No major mutations conferring resistance to integrase inhibitors were found and polymorphic accessory mutations were solely observed in low frequency among subtype C sequences-L74M (3.4%), T97A (1.8%), and E157Q (1.8%)-suggesting that this new antiretroviral drug class will be effective in Mozambique providing a good perspective to the introduction of this class of drugs in that country.

The activity of the integrase inhibitor dolutegravir against HIV-1 variants isolated from raltegravir-treated adults

BACKGROUND

Dolutegravir (DTG, S/GSK1349572) is an integrase inhibitor with low nanomolar potency. Susceptibility to dolutegravir and raltegravir was determined for raltegravir-resistant clinical isolates.

METHODS

Genotypic and phenotypic susceptibility to integrase inhibitors was examined using 39 clinical isolate samples obtained from 18 adults who had exhibited incomplete viral suppression on a raltegravir-based regimen.

RESULTS

Of 39 samples evaluated, 30 had genotypic and phenotypic resistance to raltegravir. All samples lacking raltegravir resistance retained complete susceptibility to dolutegravir. Of the 30 samples with genotypic evidence of raltegravir resistance, the median level of phenotypic resistance to raltegravir was high (median fold change in inhibitory concentration at 50%, >81; range, 3.7 to >87), while the level of resistance to dolutegravir was close to that of wild-type variants (median fold change, 1.5; range, 0.9-19.0). Longitudinal samples from 5 subjects collected during long-term failure of raltegravir revealed time-dependent general decreases in phenotypic susceptibility to raltegravir, with minimal changes in phenotypic susceptibility to dolutegravir. The median fold change to dolutegravir for isolates containing changes at G140S + Q148H, G140S + Q148R, T97A + Y143R, and N155H (thus including raltegravir signature resistance codons) were 3.75, 13.3, 1.05, and 1.37, respectively.

CONCLUSIONS

Dolutegravir retained in vitro activity against clinical isolates obtained from subjects who failed raltegravir-based therapy at near wild-type levels for variants containing the Y143 and N155 resistance mutations. Isolates with Q148 plus additional integrase mutations possessed a broader range of and more reduced susceptibility to dolutegravir.

Comparison of the Mechanisms of Drug Resistance among HIV, Hepatitis B, and Hepatitis C

Human immunodeficiency virus (HIV), hepatitis B virus (HBV), and hepatitis C virus (HCV) are the most prevalent deadly chronic viral diseases. HIV is treated by small molecule inhibitors. HBV is treated by immunomodulation and small molecule inhibitors. HCV is currently treated primarily by immunomodulation but many small molecules are in clinical development. Although HIV is a retrovirus, HBV is a double-stranded DNA virus, and HCV is a single-stranded RNA virus, antiviral drug resistance complicates the development of drugs and the successful treatment of each of these viruses. Although their replication cycles, therapeutic targets, and evolutionary mechanisms are different, the fundamental approaches to identifying and characterizing HIV, HBV, and HCV drug resistance are similar. This review describes the evolution of HIV, HBV, and HCV within individuals and populations and the genetic mechanisms associated with drug resistance to each of the antiviral drug classes used for their treatment.