Enhanced Sulfamerazine Removal via Adsorption–Photocatalysis Using Bi2O3–TiO2/PAC Ternary Nanoparticles

Fate of sulfamerazine by synchronous adsorption and photocatalysis dependent on natural organic matter properties

Natural organic matter (NOM) can impede the removal of organic micro-pollutants (OMPs) through several mechanisms, including inner filter effect, competition with the target OMP, and radical scavenging, during synchronous adsorption/photocatalysis of multi-functional composites. In this study, the fate and inhibitory mechanisms of sulfamerazine (SMZ, a model OMP) that occurred in presence of seven different NOM samples (i.e. three standard NOM surrogates, a river water sample, a carbon filter effluent and two different sand filter effluents) during the adsorption/photocatalysis by a composite of Bi2O3-TiO2 supported on powdered activated carbon (Bi2O3-TiO2/PAC, abbreviated as BTP) when exposed to visible light irradiation were revealed. The results indicated that adsorption played a greater attribution than photocatalysis on SMZ removal. The primary impediment to the adsorption and photocatalytic degradation of SMZ was attributed to the presence of terrestrial-derived, humic-like NOM fractions with high aromaticity. The adsorption efficacy of SMZ was weakened by the absorption of NOM and its degradation products onto the BTP surface. The inner filter effect, competition between NOM and SMZ, and radical scavenging were responsible for the reduced photocatalysis of SMZ. In the cases of real water matrices, the presence of inorganic anion and co-existed NOM reduced the removal of SMZ. In summary, the findings of this work offer a comprehensive comprehension of the impact of NOM fractions on photocatalysis, emphasizing the necessity to examine the interplay between NOM and background inorganic constituents in the degradation of OMP via adsorption/photocatalysis.

Efficient degradation of sulfonamides by introducing sulfur to magnetic Prussian blue analog in photo-assisted persulfate oxidation system

The peroxynitrite photocatalytic degradation system was considered a green, convenient, and efficient water treatment process, but not satisfying against some antibiotics, e.g. sulfonamides (SAs). To improve the photocatalytic degradation efficiency of SAs, sulfur was introduced to a magnetic Fe-MOF (Fe-metal organic framework) Prussian blue analog to achieve a heteroatomic material CuFeO@S, which was applied in heterogeneous visible light photo-assisted catalytic process with persulfate (PS) as an oxidant. The characterization results of CuFeO@S by XRD and XPS confirmed the presence of Fe3O4 (for magnetic separation), Cu+ (for activation of PS) and S2- (for narrowing the energy band and prolonging the lifetime of photo-generated electronics). Through systematic optimization of reaction conditions in CuFeO@S + PS + hv system, efficient degradation of four tested SAs was achieved in 30 min (removal rate of 97-100% for the tested 4 SAs). Moreover, the material could be magnetically recycled and reused for over 7 cycles with a removal rate of >90% for sulfamerazine. Furthermore, the removal rate of sulfamerazine in pond water reached 99% at a mineralization rate of about 34% (decrease in total organic matter), demonstrating its potential in the treatment of antibiotic-containing wastewater.

Bismuth-based nanostructured photocatalysts for the remediation of antibiotics and organic dyes

A serious threat to human health and the environment worldwide, in addition to the global energy crisis, is the increasing water pollution caused by micropollutants such as antibiotics and persistent organic dyes. Nanostructured semiconductors in advanced oxidation processes using photocatalysis have recently attracted a lot of interest as a promising green and sustainable wastewater treatment method for a cleaner environment. Due to their narrow bandgaps, distinctive layered structures, plasmonic, piezoelectric and ferroelectric properties, and desirable physicochemical features, bismuth-based nanostructure photocatalysts have emerged as one of the most prominent study topics compared to the commonly used semiconductors (TiO2 and ZnO). In this review, the most recent developments in the use of photocatalysts based on bismuth (e.g., BiFeO3, Bi2MoO6, BiVO4, Bi2WO6, Bi2S3) to remove dyes and antibiotics from wastewater are thoroughly covered. The creation of Z-schemes, Schottky junctions, and heterojunctions, as well as morphological modifications, doping, and other processes are highlighted regarding the fabrication of bismuth-based photocatalysts with improved photocatalytic capabilities. A discussion of general photocatalytic mechanisms is included, along with potential antibiotic and dye degradation pathways in wastewater. Finally, areas that require additional study and attention regarding the usage of photocatalysts based on bismuth for removing pharmaceuticals and textile dyes from wastewater, particularly for real-world applications, are addressed.

Intercalating negatively charged pillars into graphene oxide sheets to enhance sulfonamide pharmaceutical removal from water

Herein, novel composite materials were prepared by intercalating functional pillars, i.e., pentafluorobenzene (PFB) and sodium 2,3,4,5,6-pentafluorobenzoate (PFBS), into graphene oxide (GO) sheets. It led to forming size hives and increased availability of intrinsic area of GO. The synthesized materials (GO-PFB and GO-PFBS) were investigated as adsorbents to eliminate sulfadiazine (SD) from aqueous solutions. The adsorption capacities of GO-PFBS (1002.21 μmol/g) and GO-PFB (564.17 μmol/g) were 6.37 and 3.59 times higher than that of GO (157.21 μmol/g), respectively. The adsorption of SD onto GO-PFBS decreased with increasing solution pH. Density functional theory (DFT) results revealed that the SD adsorption onto the adsorbents was exothermic, and the introduction of the carboxylate groups showed lower binding energy. It was found that hydrophobic interaction fully participates in the adsorption process, and the electrostatic complementation of hydrogen bonding further enhances the SD adsorption. Obtained results showed that intercalating functional rigid molecules as pillars to support GO sheets could improve its adsorption behavior.

Facile synthesis of novel NH2-MIL-53(Fe)/AgSCN heterojunction composites as a highly efficient photocatalyst for ciprofloxacin degradation and H2 production under visible-light irradiation

A novel NH2-MIL-53(Fe)/AgSCN composite photocatalyst was successfully prepared by a one-step chemical precipitation method, the composite show high photocatalytic activity for antibiotics degradation and H2 evolution under visible light irradiation.

A review of bismuth-based photocatalysts for antibiotic degradation: Insight into the photocatalytic degradation performance, pathways and relevant mechanisms

The intensive production and utilization of antibiotics worldwide has inevitably led to releases of very large amounts of these medicines into the environment, and numerous strategies have recently been developed to eliminate antibiotic pollution. Therefore, bismuth-based photocatalysts have attracted much attention due to their high adsorption of visible light and low production cost. This review summarizes the performance, degradation pathways and relevant mechanisms of typical antibiotics during bismuth-based photocatalytic degradation. First, the band gap and redox ability of the bismuth-based catalysts and modified materials (such as morphology, structure mediation, heterojunction construction and element doping) were compared and evaluated. Second, the performance and potential mechanisms of bismuth oxides, bismuth sulfides, bismuth oxyhalides and bismuth-based metal oxides for antibiotic removal were investigated. Third, we analysed the effect of co-existing interfering substances in a real water matrix on the photocatalytic ability, as well as the coupling processes for degradation enhancement. In the last section, current difficulties and future perspectives on photocatalytic degradation for antibiotic elimination by bismuth-based catalysts are summarized. Generally, modified bismuth-based compounds showed better performance than single-component photocatalysts during photocatalytic degradation for most antibiotics, in which h⁺ played a predominant role among all the related reactive oxygen species. Moreover, the crystal structures and morphologies of bismuth-based catalysts seriously affected their practical efficiencies.