Conductive Keratoplasty for the Correction of Residual Hyperopia After LASIK

Hydrogel Inlay for Presbyopia: Objective and Subjective Visual Outcomes

PURPOSE

To evaluate changes in visual performance and ocular optical quality after implantation of a corneal hydrogel inlay as a treatment for presbyopia.

METHODS

A Raindrop Near Vision Inlay (ReVision Optics, Lake Forest, CA) was implanted monocularly on the stromal bed of a femtosecond laser-assisted generated corneal flap of non-dominant eyes of 22 patients with emmetropic presbyopia (preoperative spherical equivalent range: -0.50 to 1.00 diopters). Efficacy was determined by measuring near and distance visual acuities and ocular aberrations, and satisfaction was assessed by a patient questionnaire.

RESULTS

The preoperative monocular uncorrected near visual acuity of the inlay inserted eye was 20/129 ± 1 Snellen (range: 20/135 to 20/61 Snellen) and improved to 20/35 ± 2 Snellen (range: 20/61 to 20/20 Snellen) (P < .01) at 6 months postoperatively. The monocular uncorrected distance visual acuity of the eye receiving the inlay was 20/25 ± 2 Snellen (range: 20/50 to 20/20 Snellen) preoperatively and 20/25 ± 1 Snellen (range: 20/50 to 20/20 Snellen) at 6 months postoperatively (P =.257). According to the questionnaire responses, 82% of patients were satisfied. This was despite near glasses needs remaining in 13.6% of the cohort and the presence of glare and a decrease in night vision in approximately 40% of patients. The primary spherical aberration coefficient Z4(0) changed from positive to negative values in all patients (P < .01). However, the point spread function showed no significant change.

CONCLUSIONS

Hydrogel corneal inlays improve uncorrected near visual acuity in patients with presbyopia with only moderate effect on visual quality. However, the satisfaction with this therapy was relatively lower in these Korean patients than that reported previously in Western patients.

Removability of a small aperture intracorneal inlay for presbyopia correction

PURPOSE

To evaluate the safety of the corneal inlay removal procedure and the reversibility of visual acuities, corneal topography, and corneal biomicroscopy changes in a series of cases.

METHODS

Ten cases implanted with one of three versions of the AcuFocus Kamra Inlay (ACI 7000, 7000T, and 7000PDT; AcuFocus, Inc., Irvine, CA) were followed for a minimum of 6 months after corneal inlay removal.

RESULTS

The reason for removal was related to subjective dissatisfaction with visual symptoms (8 of 10 patients) such as night glare, photophobia, starburst, blurry vision, and halos. One case of removal was related to inadvertent thin flap and the final case was related to insufficient near vision. Mean uncorrected distance visual acuity (UDVA) and uncorrected near visual acuity (UNVA) was 0 ± 0.1 logMAR (Snellen 20/20) and 0.5 ± 0.2 logMAR (Snellen 20/40), respectively, preoperatively and 0.1 ± 0.1 logMAR (Snellen 20/25) and 0.5 ± 0.1 logMAR (Snellen 20/63), respectively, 6 months after corneal inlay removal. Mean corrected distance visual acuity (CDVA) and corrected near visual acuity (CNVA) was 0 ± 0.1 logMAR (Snellen 20/20) and 0 ± 0.1 logMAR (Snellen 20/20), respectively, preoperatively and 0 ± 0.1 logMAR (Snellen 20/20) and 0.1 ± 0.1 logMAR (Snellen 20/25), respectively, 6 months after corneal inlay removal. Mean root mean square (RMS) higher-order aberration (HOA) was 0.50 ± 0.12 (range: 0.30 to 0.70) preoperatively and 0.69 ± 0.14 (range: 0.48 to 0.95) 6 months after corneal inlay removal (P < .8). Weak positive correlation was found between Δt Implant-Removal (Δt I-R), RMS spherical, coma, and HOA at 6 months (Δt I-R vs RMS spherical was r = 0.2, r(2) = 0.5, P < .7; Δt I-R vs RMS coma was r = 0.8, r(2) = 0.6, P < .3; and Δt I-R vs HOA r = 0.8; r(2) = 0.6, P < .9).

CONCLUSION

This study suggests that after removal of the corneal inlay, corneal topography and corneal aberrometry are not permanently affected. In more than 60% of patients, CNVA, CDVA, UNVA, and UDVA were similar to the preoperative value.

Measurement of the anisotropic thermal conductivity of the porcine cornea

Accurate thermal models for the cornea of the eye support the development of thermal techniques for reshaping the cornea and other scientific purposes. Heat transfer in the cornea must be quantified accurately so that a thermal treatment does not destroy the endothelial layer, which cannot regenerate, and yet is responsible for maintaining corneal transparency. We developed a custom apparatus to measure the thermal conductivity of ex vivo porcine corneas perpendicular to the surface and applied a commercial apparatus to measure thermal conductivity parallel to the surface. We found that corneal thermal conductivity is 14% anisotropic at the normal state of corneal hydration. Small numbers of ex vivo feline and human corneas had a thermal conductivity perpendicular to the surface that was indistinguishable from the porcine corneas. Aqueous humor from ex vivo porcine, feline, and human eyes had a thermal conductivity nearly equal to that of water. Including the anisotropy of corneal thermal conductivity will improve the predictive power of thermal models of the eye.

Conductive keratoplasty to treat hyperopic overcorrection after LASIK for myopia

PURPOSE

to investigate the refractive outcomes and stability of conductive keratoplasty (CK) for retreatment of myopic LASIK overcorrection.

METHODS

seven eyes (six patients) that were overcorrected after myopic LASIK by +1.00 to +2.75 diopters (D) manifest refraction spherical equivalent (MRSE) were retreated using CK. All eyes had insufficient stromal thickness for LASIK retreatment. LightTouch CK was performed at least 1 year after LASIK. Either 8 or 16 spots were applied at 7- and/or 8-mm zones on the cornea. Uncorrected distance visual acuity, manifest refraction, corrected distance visual acuity (CDVA), and postoperative complications were analyzed.

RESULTS

mean MRSE after CK at last follow-up was +0.38 ± 0.52 D (range: -0.38 to +1.13 D). The change in MRSE ranged from -0.63 to -2.38 D. Mean MRSE after CK changed from -0.60 ± 2.07 D (range: -3.38 to +1.50 D) at 1 week to +0.45 ± 0.69 D (range: -0.38 to +1.38 D) at 12 months. Two eyes experienced an initial overcorrection of -2.75 D and -3.38 D, respectively, at 1 week after CK. Cylinder ≤0.75 D was induced in four eyes, whereas one eye had a 0.75-D reduction in cylinder. All eyes had CDVA of logMAR 0.10 or better. Two eyes lost one line of CDVA and no eyes lost more than one line.

CONCLUSIONS

lighttouch CK retreatment for over-corrected myopic LASIK can reduce the hyperopia but produces minimal change in cylinder, and may be appropriate for eyes with insufficient stromal tissue for repeated excimer laser surgery. Early regression occurs commonly.

Hydrogel intracorneal inlays for the correction of hyperopia: outcomes and complications after 5 years of follow-up

PURPOSE

To evaluate safety and efficacy of an intracorneal inlay for the correction of hyperopia.

DESIGN

A prospective, nonrandomized, noncomparative, 2-center study.

PARTICIPANTS

Thirty-four hyperopic eyes were implanted with a hydrogel intracorneal inlay (Permavision, Anamed, Lake Forest, CA). Preoperative hyperopia was +3.9 diopter (D; range, +2 to +7). Uncorrected visual acuity (UCVA) was the logarithm of the minimum angle of resolution (logMAR; the decimal logarithm of decimal visual acuity with a minus sign) 0.6 +/- logMAR 1, and best-corrected visual acuity (BCVA) was logMAR 0.1 +/- 0.7.

METHODS

Corneal flaps were created with a mechanical microkeratome (M2 [Moria, Anthony, France] or Amadeus [Advanced Medical Optics Inc, Santa Ana, CA]; 180 microm), followed by inlay implantation onto the stromal bed over the pupillary center and covered by the corneal flap. Follow-up was 5 years.

MAIN OUTCOME MEASURES

We measured UCVA and BCVA; patients underwent, slit-lamp examination, pachymetry, and confocal microscopy. The follow-up was up to 6 years.

RESULTS

The UCVA improved during 3 months and was stable for up to 2 years. There was a loss of > or =2 lines of spectacle-corrected visual acuity in 35% of eyes at 2 years, and a loss of > or =2 lines in 55.5% of the eyes at 5 years. Refractive predictability was poor, with 60% of the eyes having +/-3.00 D of emmetropia. A decentration of the inlay occurred in 29.4%, progressive perilenticular deposits were observed in 88.2%, haze was seen in 73.5%, and the inlay was explanted in 58.8%, with a cumulative survival rate of 58.4%.

CONCLUSIONS

An intracorneal inlay may be an option to treat hyperopia, but the tested inlay caused significant visual loss and scarring and had to be explanted in the majority of cases.

Theoretical modeling for radiofrequency ablation: state-of-the-art and challenges for the future

Radiofrequency ablation is an interventional technique that in recent years has come to be employed in very different medical fields, such as the elimination of cardiac arrhythmias or the destruction of tumors in different locations. In order to investigate and develop new techniques, and also to improve those currently employed, theoretical models and computer simulations are a powerful tool since they provide vital information on the electrical and thermal behavior of ablation rapidly and at low cost. In the future they could even help to plan individual treatment for each patient. This review analyzes the state-of-the-art in theoretical modeling as applied to the study of radiofrequency ablation techniques. Firstly, it describes the most important issues involved in this methodology, including the experimental validation. Secondly, it points out the present limitations, especially those related to the lack of an accurate characterization of the biological tissues. After analyzing the current and future benefits of this technique it finally suggests future lines and trends in the research of this area.