Reduced-fat foods: the complex science of developing diet-based strategies for tackling overweight and obesity

Synergistic effect and mechanism of stabilization of Pickering emulsion by carboxymethyl starch and xanthan gum

Pickering emulsions were prepared using different proportions of carboxymethyl starch (CMS) and xanthan gum (XG) combined systems as emulsifying stabilizers (The mass ratios of CMS and XG were 10:0, 9:1, 7:1, 5:1, 3:1 and 1:1, respectively). The synergistic mechanism between CMS and XG was also explored. The results demonstrated that CMS particles were uniformly and densely embedded in the gel-like structure formed by XG, and the electrostatic repulsion between CMS and XG led to a reduction in droplet size (from 3370 nm to 482 nm), resulting in a more compact and orderly droplet distribution. Combined systems of CMS and XG at different proportions enhanced the hardness (3.05-8.36 g), adhesiveness (3.26-8.41 g), and chewiness (4.05-8.20 g) of the emulsion. AFM observed that the emulsion particles were finer and more evenly dispersed. After heat treatment at 25 °C, 60 °C and 80 °C, the emulsion showed no significant stratification phenomenon, and CMS/XG enhanced the heat stability of the emulsion. LF-NMR confirmed that the oil and water could be evenly distributed and the emulsification of the system was complete. Especially when the ratio of CMS and XG was 3:1 and 1:1, the emulsion with a stable and long storage period could be obtained.

Optimization of emulsification conditions with rice bran concentrates for the preliminary formulation of potential vegan dressings and their characterization

A fraction of rice bran (RB), generated during the brown rice polishing, is utilized to extract oil, resulting in defatted RB (DRB). The aim of this study was to optimize the emulsification conditions to enhance the value of this byproduct by formulating potential vegan dressings and characterizing them. Enzymatic hydrolysis of the starch present in DRB yields the DRB concentrate (DRBC). A central composite design was applied and the results were analyzed using response surface methodology to select optimal conditions for an oil-in-water emulsion formula. Two formulations were chosen: one corresponds to the optimal conditions, with 26.5% of oil and 73.5% of DRBC dispersion (eoptimal), and the other one with 21.7% of oil and 78.3% of dispersion (eED8). The eoptimal formulation exhibited significantly lower mean De Brouckere diameter (D4,3) value and higher viscosity when compared with eED8. For both emulsions, the particle size distribution and D4,3 remained unchanged during storage, whereas viscosity decreased, and backscattering (BS) increased. Initially, both emulsions exhibited solid viscoelastic behavior, which was partially lost during quiescent storage. The increase in BS was attributed to particle disaggregation, ultimately leading to the aforementioned change in rheological behavior. In conclusion, although the designed emulsions underwent microstructural changes, they were stable against gravitational separation. To improve stability during quiescent storage, it is suggested to incorporate a thickening agent. Hence, it is propose to procced with the development of a vegan dressing based on the eoptimal emulsion, as it exhibits superior physicochemical properties.

Rheological study of nanoemulsions with repulsive and attractive interdroplet interactions

Nanoemulsions have adjustable transparency, tunable rheology, high stability, and low sensitivity to changes in pH and temperature, which make them interesting for applications such as low-fat and low-calorie foods. In this research, we study model concentrated nanoemulsions which are stabilized by sodium dodecyl sulfate (SDS). To prepare samples in different structural states, semi-dilute nanoemulsions are prepared at 25% droplet volume fraction (φ), after which evaporating the continuous phase at room temperature leads to concentrated nanoemulsions up to 60% volume fraction. Surfactant concentration is also tuned to induce different interdroplet interactions so that concentrated nanoemulsions in repulsive glass, attractive glass, and gel states are achieved. Rheological properties of nanoemulsions with different structural states are comprehensively studied over a volume fraction range. Utilizing the existing predictive models for (nano)emulsion rheology reveals a more satisfactory prediction for repulsive systems than systems with attractive interactions. In addition, a master curve is constructed for storage and loss moduli of nanoemulsions with different interdroplet interactions. The present work offers control over physicochemical properties of nanoemulsions for design of new food products with enhanced quality and functionality.

The colloid and interface strategies to inhibit lipid digestion for designing low-calorie food

Although fat is one of the indispensable components of food flavor, excessive fat consumption could cause obesity, metabolism syndromes and an imbalance in the intestinal flora. In the pursuit of a healthy diet, designing fat reducing foods by inhibiting lipid digestion and calorie intake is a promising strategy. Altering the gastric emptying rates of lipids as well as acting on the lipase by suppressing the enzymatic activity or limiting lipase diffusion via interfacial modulation can effectively decrease lipolysis rates. In this review, we provide a comprehensive overview of colloid-based strategies that can be employed to retard lipid hydrolysis, including pancreatic lipase inhibitors, emulsion-based interfacial modulation and fat substitutes. Plants-/microorganisms-derived lipase inhibitors bind to catalytic active sites and change the enzymatic conformation to inhibit lipase activity. Introducing oil-in-water Pickering emulsions into the food can effectively delay lipolysis via steric hindrance of interfacial particulates. Regulating stability and physical states of emulsions can also affect the rate of hydrolysis by altering the active hydrolysis surface. 3D network structure assembled by fat substitutes with high viscosity can not only slow down the peristole and obstruct the diffusion of lipase to the oil droplets but also impede the transportation of lipolysis products to epithelial cells for adsorption. Their applications in low-calorie bakery, dairy and meat products were also discussed, emphasizing fat intake reduction, structure and flavor retention and potential health benefits. However, further application of these strategies in large-scale food production still requires more optimization on cost and lipid reducing effects. This review provides a comprehensive review on colloidal approaches, design, principles and applications of fat reducing strategies to meet the growing demand for healthier diet and offer practical insights for the low-calorie food industry.

Recent advances in bioactive nanocrystal-stabilized Pickering emulsions: Fabrication, characterization, and biological assessment

Numerous literatures have shown the advantages of Pickering emulsion (PE) for the delivery of bioactive ingredients in the fields of food, medicine, and cosmetics, among others. On this basis, the multi-loading mode of bioactives (internal phase encapsulation and/or loading at the interface) in small molecular bioactives nanocrystal-stabilized PE (BNC-PE) enables them higher loading efficiencies, controlled release, and synergistic or superimposed effects. Therefore, BNC-PE offers an efficacious delivery system. In this review, we briefly summarize BNC-PE fabrication and characterization, with a focus on the processes of possible evolution and absorption of differentially applied BNC-PE when interacting with the body. In addition, methods of monitoring changes and absorption of BNC-PE in vivo, from the nanomaterial perspective, are also introduced. The purpose of this review is to provide an accessible and comprehensive methodology for the characterization and evaluation of BNC-PE after formulation and preparation, especially in relation to biological assessment and detailed mechanisms throughout the absorption process of BNC-PE in vivo.

Trends and Factors Associated with Obesity Prevalence in Rural Australian Adults-Comparative Analysis of the Crossroads Studies in Victoria over 15 Years

This study examined the changes in the prevalence of obesity and associated lifestyle factors using data from repeated cross-sectional, self-reported surveys (Crossroads I: 2001-2003 and Crossroads II: 2016-2018, studies) and clinic anthropometric measurements collected from regional and rural towns in the Goulburn Valley, Victoria. Given that past community studies have only focused categorically on dietary intake, or assessed caloric energy intake, we examined the difference in broad dietary practices at two different times. Clinical assessments from randomly selected household participants aged ≥18 years were analyzed. Differences in obesity prevalence were calculated for each individual variable. Logistic regression was used to determine the odds ratios (95% confidence intervals (CI)) with and without adjustment for key lifestyle factors. There were 5258 participants in Crossroads I and 2649 in Crossroads II surveys. Obesity prevalence increased from 28.2% to 30.8% over 15 years, more among those who ate fried food, but decreased significantly among rural dwellers (31.7: 27.0, 36.8% versus 25.1: 22.9, 27.5%) and those who had adequate fruit intake (28.5: 25.0, 32.3% to 23.9: 21.8, 26.2%). Obesity was associated with older age (≥35 years), use of fat-based spreads for bread (adjusted odds ratio, aOR:1.26: 1.07, 1.48) and physical inactivity. The increase in obesity prevalence especially in the rural towns, was associated with unhealthy dietary behaviour which persisted over 15 years. Understanding and addressing the upstream determinants of dietary intake and choices would assist in the development of future health promotion Programs.

Proposed Methods for Testing and Comparing the Emulsifying Properties of Proteins from Animal, Plant, and Alternative Sources

The food industry is trying to reformulate many of its products to replace functional ingredients that are chemically synthesized or isolated from animal sources (such as meat, fish, eggs, or milk) with ingredients derived from plant or microbial sources. This effort is largely a result of the demand for foods that are better for the environment, human health, and animal welfare. Many new kinds of plant- or microbial-derived proteins are being isolated for potential utilization as functional ingredients by the food industry. A major challenge in this area is the lack of standardized methods to measure and compare the functional performance of proteins under conditions they might be used in food applications. This information is required to select the most appropriate protein for each application. In this article, we discuss the physicochemical principles of emulsifier functionality and then present a series of analytical tests that can be used to quantify the ability of proteins to form and stabilize emulsions. These tests include methods for characterizing the effectiveness of the proteins to promote the formation and stability of the small droplets generated during homogenization, as well as their ability to stabilize the droplets against aggregation under different conditions (e.g., pH, ionic composition, temperature, and shearing). This information should be useful to the food industry when it is trying to identify alternative proteins to replace existing emulsifiers in specific food applications.

The Influence of Cellulose Ethers on the Physico-Chemical Properties, Structure and Lipid Digestibility of Animal Fat Emulsions Stabilized by Soy Protein

This study explores the influence of carboxymethylcelullose (CMC) and methylcelullose (MC), added by simultaneous (sim) and sequential (seq) emulsification methods, on the structure, rheological parameters and in vitro lipid digestibility of pork lard O/W emulsions stabilized by soy protein concentrate (SPC). Five emulsions (SPC, SPC/CMC-sim, SPC/CMC-seq SPC/MC-sim, SPC/MC-seq) were prepared in vitro. The presence of CMC and MC, and the stage of incorporation affected the emulsion microstructure. In the SPC emulsion, lipid droplets were entrapped by a protein layer that was thicker when MC was added, providing greater resistance against environmental stresses during gastrointestinal digestion. At 37 °C, CMC incorporation produced a structural reinforcement of the SPC emulsion, whereas MC addition did not affect the network rigidity, although a delaying effect on the crossover temperature was observed, which was more evident in SPC/MC–seq. The presence and stage of CMC and MC incorporation affected the rate and extent of lipolysis, with SPC/MC-seq presenting an inferior concentration of free fatty acids. The lower extent of lipolysis observed in SPC/MC-seq may be positive in the manufacture of animal fat products in which reduced fatty acid absorption is intended.

Recent Developments in the Formulation and Use of Polymers and Particles of Plant-based Origin for Emulsion Stabilizations

The main scope of this Review was the recent progress in the use of plant-based polymers and particles for the stabilization of Pickering and non-Pickering emulsion systems. Due to their availability and promising performance, it was discussed how the source, modification, and formulation of cellulose, starch, protein, and lignin-based polymers and particles would impact their emulsion stabilization. Special attention was given toward the material synthesis in two forms of polymeric surfactants and particles and the corresponding formulated emulsions. Also, the effects of particle size, degree of aggregation, wettability, degree of substitution, and electrical charge in stabilizing oil/water systems and micro- and macro-structures of oil droplets were discussed. The wide range of applications using such plant-based stabilizers in different technologies as well as their challenge and future perspectives were described.

The Potential Use of Cold-Pressed Pumpkin Seed Oil By-Products in a Low-Fat Salad Dressing: The Effect on Rheological, Microstructural, Recoverable Properties, and Emulsion and Oxidative Stability

The cold-pressed pumpkin seed oil by-product (POB) was evaluated for its application as a natural fat substitute and stabilizer in the reduced-fat salad dressings. For this aim, the samples were prepared by combining the xanthan gum (0.2–0.4 g/100 g), POB (1.0–5.0 g/100 g), egg yolk powder (3 g/100 g), and sunflower oil (10–30 g/100 g) in 17 different formulations. The optimization was carried out using response surface methodology (RSM) and full factorial central composite design (CCD). Results showed that all samples presented the shear-thinning (or pseudoplastic) flow behavior with 3.75–16.11 Pa·sⁿ and 0.18–0.30, K and n values, respectively. The flow behavior rheological data were fitted to a power-law model (R² > 0.99). The samples with high POB and low oil content showed similar K and n values compared to high oil content samples. Additionally, the dynamic rheological properties and three interval thixotropic test (3-ITT) were determined. The G′ value was larger than G″ in all frequency ranges, indicating viscoelastic solid characteristics in all samples. The optimum formulation was determined as 0.384% XG, 10% oil, and 3.04% POB. The samples prepared with the optimum formulation (POBLF-SD) were compared to low-fat (LF-SD), and high-fat (HF-SD) control salad dressing samples based on the rheological properties, emulsion stability, oxidative stability, zeta potential, and particle size. The oxidation kinetic parameters namely, IP, E_a, ΔS⁺⁺, and ΔG⁺⁺ showed that the oxidative stability of salad dressing samples could be improved by enriched by POB. The results of the present study demonstrated that POB could be considerably utilized as a natural fat substitute and stabilizer in salad dressing type emulsions.

Physical properties of UHT light cream: impact of the high-pressure homogenization and addition of hydrocolloids

The beneficial effects of a healthy diet on the quality of life have prompted the food industry to develop low-fat variants, but fat content directly affects the physicochemical and sensory properties of food products. The utilization of high-pressure homogenization (HP) and incorporation of hydrocolloids have been suggested as strategies to improve the physical stability and rheological properties of light cream. Thus, this study aims to analyze the associated effect of high-pressure homogenization (80 MPa) and three different hydrocolloids: microcrystalline cellulose, locust bean gum and xanthan gum, on emulsion stability and rheological properties of ultra-high-temperature (UHT) light cream (ULC) with a 15% w/w fat content. The stability of ULC was determined by the ζ potential of oil droplets and emulsion stability percentage. Rheological characterization was based on flow behavior tests and dynamic oscillatory measurements, which were carried out in a rheometer. Results showed that the high-pressure homogenization process did not influence the emulsion stability of the treatments. Moreover, the hydrocolloids added to systems present weak interactions with milk proteins since all ULC showed macroscopical phase separation. The samples presented the same rheological behavior and were classified as pseudoplastic fluids (n < 1). ULC treated at 80 MPa was significantly (P ≤ 0.05) more consistent than the treatments at 20 MPa. All ULC showed a predominant elastic behavior (G' > G″), and a remarkable increase in both G' and G″ at 80 MPa. The results presented in this study highlight the potential of HP for altering some rheological characteristics of UHT light cream, for example, to increase its consistency. These results are important for the dairy industry and ingredient suppliers, in the standardization of UHT light cream and/or to develop low-fat products.

Evaluating high pressure-treated corn and waxy corn starches as novel fat replacers in model low-fat O/W emulsions: A physical and rheological study

High hydrostatic pressure-treated corn starch (HPCS) and waxy corn starch (HPWCS) at three concentrations (10%, 15%, and 20%) were applied as novel fat replacers in a model low O/W emulsion at three fat reduction levels (FR, 25%, 50%, and 75%) and some physical, textural and rheological characteristics and stability of the samples were examined and compared with the control. Applying higher concentrations of HPCS and HPWCS increased the zeta potential, hardness and consistency (mainly for HPWCS samples), reversely decreased the Z-average particle size and polydispersity index of the reduced-fat emulsions, but augmenting FR levels caused a reverse inclination. The rheological assay cleared that the emulsions prepared with HPWCS had greater elastic modulus (G') and more gap between G' and viscous modulus (G″) at all concentrations than the HPCS-contained samples. The critical stress (τ_c) of 25FR samples were significantly higher than the control, showing the well stability of reduced-fat samples. Also, the τ_c of the HPCS-contained emulsions reduced meaningfully when the FR level increased from 25% to 75%, but for the HPWCS samples, fat reduction didn't change the τ_c value significantly up to 50% fat reduction. Based on Tangδ_s(n-LVE), HPWCS contained samples showed more spreadability than the HPCS-contained emulsions.

Common variants in the CD36 gene are associated with dietary fat intake, high-fat food consumption and serum triglycerides in a cohort of Quebec adults

BACKGROUND

The CD36 gene is a candidate for sensory detection of fatty acids and has been associated with individual differences in fat preferences and consumption. Excess adiposity may compromise sensory detection, but few studies have examined whether associations between CD36 variants and fat consumption differ between underweight/normal weight (UW/NW) and overweight/obese (OW/OB) individuals.

METHODS

Diet (assessed by food frequency questionnaire), genetic (nine variants), body mass index (BMI), lifestyle and biomarker data were obtained from the CARTaGENE biobank (n = 12,065), a Quebec cohort of middle-aged adults. Primary outcome variables included intakes (%kcal/day) of total, saturated (SFA), monounsaturated (MUFA) and polyunsaturated (PUFA) fatty acids. Secondary outcome variables included consumption (servings/day) of four food categories with high-fat content (added fats and oils, high-fat foods, desserts and MUFA- and PUFA-rich foods) and biomarkers of chronic disease. Multivariable regression models stratified by BMI category were used to assess associations between CD36 variants and outcome variables.

RESULTS

Among UW/NW, rs1049654 and rs10499859 were associated with higher intakes of total fat, MUFA and PUFA (all P < 0.05), while rs1527483 and rs3211956 were associated with higher SFA (P = 0.0278) and lower PUFA (P = 0.0466) intake, respectively. Rs1527483 and rs3211956 were also associated with higher consumption of high-fat foods and desserts (all P < 0.05). Among OW, rs1054516 and rs3173798 were associated with higher SFA intake (both P < 0.05), and rs1054516 was also associated with higher serum triglycerides (P = 0.0065).

CONCLUSIONS

CD36 variants are associated with habitual fat consumption, which may play a role in subsequent associations with chronic-disease biomarkers. Associations differ by BMI status and dietary fat type.

Effects of acetylated cassava starch on the physical and rheological properties of multicomponent protein emulsions

The present study investigates the effect of different acetylated cassava starch (ACS) concentrations on the physical and rheological properties of multicomponent emulsion-based products at specific pH values. The emulsion-based products were made by mixing 2% (w/v) prepared lipid droplets that were stabilized by either native or heated whey proteins, 0.01% (w/v) flaxseed gum and 0-6.0% (w/v) ACS. The results indicated that particle size, apparent viscosity and rheological moduli of multicomponent emulsion-based products were significantly enhanced with increasing addition amounts of ACS (P < 0.05). Moreover, the microscopic morphology showed that the addition of ACS contributed to the formation of a more compact, uniform, and continuous comb-like network. However, higher ACS concentration was prone to induce visibly larger aggregations and coarser textures, lending to some negative impact on visual appearance and overall acceptability. Moreover, acidic conditions could obviously promote droplet aggregation via electrostatic interactions, whereas neutral conditions had no effect on droplet aggregation. Additionally, when compared with native whey proteins, lipid droplets stabilized by their heated protein forms induced significantly higher apparent viscosities and rheological moduli of multicomponent emulsion-based products (P < 0.05). Our results potentially provide some information for the creation of multicomponent emulsion-based products with various desirable quality attributes.

Potential impact of gradual reduction of fat content in manufactured and out-of-home food on obesity in the United Kingdom: a modeling study

BACKGROUND

Manufactured and out-of-home foods contribute to excessive calories and have a critical role in fueling the obesity epidemic. We propose a 20% fat reduction in these foods.

OBJECTIVES

To evaluate the potential impact of the proposed strategy on energy intake, obesity and related health outcomes in the population.

METHODS

We used the National Diet and Nutrition Survey rolling program (NDNS RP) data to calculate fat and energy contributions from 46 manufactured and out-of-home food categories. We considered a gradual fat reduction-focusing on SFA-in these categories to achieve a 20% reduction in 5 years. We estimated the reduction in energy intake in the NDNS RP population and predicted the body weight reduction using a weight loss model. We scaled up the body weight reduction to the UK adult population. We estimated reductions in overweight/obesity and type 2 diabetes cases. We calculated the reductions of LDL, ischemic heart disease (IHD), and stroke deaths that could be prevented from the SFA reduction.

RESULTS

The selected categories contributed to 38.6% of the population's energy intake. By the end of the fifth year, our proposed strategy would reduce the mean energy intake by 67.6 kcal/d/person (95% CI: 66.1-68.8). The energy reduction would reduce the mean body weight by 2.7 kg (95% CI: 2.6-2.8). The obesity prevalence would be reduced by 5.3% and the overweight prevalence by 1.5%, corresponding to 3.5 and 1 million cases of obesity and overweight, respectively, being reduced in the United Kingdom. The body weight reduction could prevent 183,000 (95% CI: 171,000-194,000) cases of type 2 diabetes over 2 decades. Energy from SFA would fall by 2.6%, lowering LDL by 0.13 mmol/L and preventing 87,560 IHD deaths (95% CI: 82,260-112,760) and 9520 stroke deaths (95% CI: 4400-14,660) over 20 years.

CONCLUSIONS

A modest fat reduction (particularly in SFA) in widely consumed foods would prevent obesity, type 2 diabetes, and cardiovascular disease.

Enhanced migration and sequestration of food oily additives into polystyrene oleophilic-hydrophobic-walled containers

Abstract Currently, the high natural oil content in the regular daily diet of a significant segment of the global population has raised deep concern for health authorities worldwide. One example can be soups, which are liquid foods that usually contain high salt levels besides the fat released by the ingredients during the cooking process and the oil that is directly added. This investigation focused on assessing a novel technique to regulate the oil content in soups after being served for consumption. The research aimed to examine the potential reduction of fat in soups by using a non-invasive capillary mechanism created by microchanneling used on the surface of a polystyrene oleophilic/hydrophobic wall in contact with the food to enhance the migration and further sequestration of a fraction of the freely floating oil in these meals.

Food Structure Development in Emulsion Systems

A number of food products exist, in part or entirely, as emulsions, while others are present in an emulsified state at some point during their production/formation. Mayonnaise, butter, margarine, salad dressing, whipped cream, and ice cream represent some of the typical examples of emulsion-based foods. Controlled by both formulation and processing aspects, the emulsion architecture that is formed ultimately determines many of the attributes of the final food product. This chapter initially provides an overview of the basic constituents of emulsions and their influence on the microstructure and stability of conventional as well as more complex systems. The available spectrum of processing routes and characterization techniques currently utilized (or emerging) within the area of emulsions is then discussed. The chapter concludes with a concise outline of the relationship between food emulsion microstructure design and its performance (textural, rheological, sensorial, etc.).

Simultaneous enzymatic saccharification and comminution for the valorization of lignocellulosic biomass toward natural products

Background

Large-scale processing of lignocellulosics for glucose production generally relies on high temperature and acidic or alkaline conditions. However, extreme conditions produce chemical contaminants that complicate downstream processing. A method that mainly rely on mechanical and enzymatic reaction completely averts such problem and generates unmodified lignin. Products from this process could find novel applications in the chemicals, feed and food industry. But a large-scale system suitable for this purpose is yet to be developed. In this study we applied simultaneous enzymatic saccharification and communition (SESC) for the pre-treatment of a representative lignocellulosic biomass, cedar softwood, under both laboratory and large-scale conditions.

Results

Laboratory-scale comminution achieved a maximum saccharification efficiency of 80% at the optimum pH of 6. It was possible to recycle the supernatant to concentrate the glucose without affecting the efficiency. During the direct alcohol fermentation of SESC slurry, a high yield of ethanol was attained. The mild reaction conditions prevented the generation of undesired chemical inhibitors. Large-scale SESC treatment using a commercial beads mill system achieved a saccharification efficiency of 60% at an energy consumption of 50 MJ/kg biomass.

Conclusion

SESC is very promising for the mild and clean processing of lignocellulose to generate glucose and unmodified lignin in a large scale. Economic feasibility is highly dependent on its potential to generate high value natural products for energy, specialty chemicals, feed and food application.

Effects of CD36 Genotype on Oral Perception of Oleic Acid Supplemented Safflower Oil Emulsions in Two Ethnic Groups: A Preliminary Study

Previous studies demonstrate humans can detect fatty acids via specialized sensors on the tongue, such as the CD36 receptor. Genetic variation at the common single nucleotide polymorphism rs1761667 of CD36 has been shown to differentially impact the perception of fatty acids, but comparative data among different ethnic groups are lacking. In a small cohort of Caucasian and East Asian young adults, we investigated if: (1) participants could detect oleic acid (C18:1) added to safflower oil emulsions at a constant ratio of 3% (w/v); (2) supplementation of oleic acid to safflower oil emulsions enhanced perception of fattiness and creaminess; and (3) variation at rs1761667 influenced oleic acid detection and fat taste perception. In a 3-alternate forced choice test, 62% of participants detected 2.9 ± 0.7 mM oleic acid (or 0.08% w/v) in a 2.8% safflower oil emulsion. Supplementation of oleic acid did not enhance fattiness and creaminess perception for the cohort as a whole, though East Asians carrying the GG genotype perceived more overall fattiness and creaminess than their AA genotype counterparts (P < 0.001). No differences were observed for the Caucasians. These preliminary findings indicate that free oleic acid can be detected in an oil-in-water emulsion at concentrations found in commercial oils, but it does not increase fattiness or creaminess perception. Additionally, variation at rs1761667 may have ethnic-specific effects on fat taste perception.