Preparation and evaluation of montelukast sodium loaded solid lipid nanoparticles

Exploring novel and fast stability or sameness evaluation tool for different categories of injectable formulations

The establishment of drug product stability and sameness is the heart of generic formulation development. For regulatory filing, various instrumental methods are used on a case basis to establish the generic and innovator product sameness in multiple aspects. Here in the present study, we explored the applicability of the Time-correlated single photon counting (TCS-PC) technique as a fast, reliable, and nondestructive method for establishing the sameness of three different categories of injectable formulations, namely, Amphotericin B liposome for injection, enoxaparin injection, and iron sucrose injection. All three category formulations were evaluated in their native and artificially induced post degradation state to identify the discrimination power of the used instrumental techniques. The degradation of materials were confirmed by high performance liquid chromatography (HPLC). Based on the product category, pre and post-degradation samples were evaluated by selective instrumental methods like differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR), fluorescence spectroscopy, particle size analysis by dynamic light scattering (DLS), small angle X-ray scattering (SAXS), Raman spectroscopy, inductively coupled plasma optical-emission spectrometry (ICP-OES) and circular dichroism study. All pre and post-degradation samples were further analyzed by TCS-PC. We observed that, TCS-PC can identify the differences between the initial and post degradation samples in very less time with promising discrimination power across the different injectable formulation types. Thus TCS-PC can be used as a fast and promising stability or sameness evaluation tool for different injectable drug products.

Amoxapine-Loaded Solid Lipid Nanoparticles with Superior Preclinical Pharmacokinetics for Better Brain Delivery: LC-MS/MS and GC-MS Analysis

The tricyclic antidepressant amoxapine (AMX) has been reported for a rapid onset of action compared to other cyclic antidepressants. It has very low solubility and bioavailability due to first-pass metabolism. Therefore, we planned to develop solid lipid nanoparticles (SLNs) of AMX using a single emulsification method to increase its solubility and bioavailability. HPLC and LC-MS/MS methods were developed further to quantify AMX in the formulation, plasma, and brain tissue samples. The formulation was studied for entrapment efficiency, loading, and in vitro drug release. Particle size and ζ potential analyses, AFM, SEM, TEM, DSC, and XRD were used for further characterization. In vivo oral pharmacokinetic and brain pharmacokinetic studies were performed using Wistar rats. The entrapment and loading efficiencies of AMX in SLNs were 85.8 ± 3.42 and 4.5 ± 0.45%, respectively. The developed formulation had a mean particle size of 151.5 ± 7.02 nm and a polydispersity index of 0.40 ± 0.11. DSC and XRD results indicated that AMX was incorporated into the nanocarrier system in an amorphous form. SEM, TEM, and AFM studies of AMX-SLNs confirmed the particles' spherical shape and nanoscale size. AMX solubility increased by approx. 2.67 times compared to the pure drug. The developed LC-MS/MS method was successfully applied to the oral and brain pharmacokinetic study of AMX-loaded SLNs in rats. Oral bioavailability was enhanced 1.6 times compared to the pure drug. The peak plasma concentrations of pure AMX and AMX-SLNs were 617.4 ± 137.4 and 1043.5 ± 150.2 (ng/mL), respectively. AMX-SLNs showed more than 5.8 times brain concentration compared to the pure drug. Based on the findings, it appears that utilizing a solid lipid nanoparticle carrier to transport AMX can be a highly effective delivery method with improved pharmacokinetic properties in the brain. This approach may prove valuable for future antidepressant treatment.

A Nano-Liposomal Formulation of Caffeic Acid Phenethyl Ester Modulates Nrf2 and NF-κβ Signaling and Alleviates Experimentally Induced Acute Pancreatitis in a Rat Model

The currently available management strategies for acute pancreatitis are inadequately effective which calls for exploration of new approaches to treat this condition. Caffeic acid phenethyl ester (CAPE) is a major bioactive constituent of honeybee propolis with promising therapeutic and preventive applications. However, its pharmaceutical potential and clinical use are hindered by its poor water solubility and limited plasma stability. In this study, we aimed to prepare, characterize and evaluate a CAPE-loaded nanoliposomal formulation to improve the efficacy of CAPE for the management of acute pancreatitis. The CAPE-loaded nanoliposomes (CAPE-loaded-NL) were prepared by a thin layer evaporation technique and were optimized using three edge activators. CAPE-loaded-NL were characterized for their vesicle size (VS), zeta potential (ZP), encapsulation efficiency (EE), polydispersity index (PDI), crystalline state and morphology. The protective effect of the optimal CAPE-loaded-NL was evaluated in a rat model of acute pancreatitis induced by administering a single intraperitoneal injection of L-ornithine. Oral pretreatment with CAPE-loaded-NL significantly counteracted ornithine-induced elevation in serum activities of pancreatic digestive enzymes and pancreatic levels of malondialdehyde, nuclear factor kappa B (NF-κB) p65, tumor necrosis factor-alpha, nitrite/nitrate, cleaved caspase-3 and myeloperoxidase activity. Moreover, pretreatment with CAPE-loaded-NL significantly reinstated the ornithine-lowered glutathione reductase activity, glutathione, nuclear factor erythroid 2-related factor 2 (Nrf2), heme oxygenase-1 levels and ATP/ADP ratio, and potentiated the Bcl-2/Bax ratio in pancreatic tissue. CAPE-loaded-NL displayed superior antioxidant, anti-inflammatory and anti-apoptotic effects compared to free CAPE oral suspension and achieved a more potent correction of the derangements in serum amylase and pancreatic myeloperoxidase activities. The histological observations were in line with the biochemical findings. Our results suggest that CAPE-loaded-NL provide a promising interventional approach for acute pancreatitis mainly through the enhancement of the exerted antioxidant, anti-inflammatory and anti-apoptotic effects which may be mediated, at least in part, through modulation of Nrf2 and NF-κβ signaling.

Synthesis of Copper Oxide-Based Nanoformulations of Etoricoxib and Montelukast and Their Evaluation through Analgesic, Anti-Inflammatory, Anti-Pyretic, and Acute Toxicity Activities

Copper oxide nanoparticles (CuO NPs) were synthesized through the coprecipitation method and used as nanocarriers for etoricoxib (selective COX-2 inhibitor drug) and montelukast (leukotriene product inhibitor drug) in combination therapy. The CuO NPs, free drugs, and nanoformulations were investigated through UV/Vis spectroscopy, FTIR spectroscopy, XRD, SEM, and DLS. SEM imaging showed agglomerated nanorods of CuO NPs of about 87 nm size. The CE1, CE2, and CE6 nanoformulations were investigated through DLS, and their particle sizes were 271, 258, and 254 nm, respectively. The nanoformulations were evaluated through in vitro anti-inflammatory activity, in vivo anti-inflammatory activity, in vivo analgesic activity, in vivo anti-pyretic activity, and in vivo acute toxicity activity. In vivo activities were performed on albino mice. BSA denaturation was highly inhibited by CE1, CE2, and CE6 as compared to other nanoformulations in the in vitro anti-inflammatory activity. The in vivo bioactivities showed that low doses (5 mg/kg) of nanoformulations were more potent than high doses (10 and 20 mg/kg) of free drugs in the inhibition of pain, fever, and inflammation. Lastly, CE2 was more potent than that of other nanoformulations.

Formulation and Cost-Effectiveness of Fluid Gels as an Age-Appropriate Dosage Form for Older Adults with Dysphagia

Dysphagia is associated with increased dependency and treatment costs, whereby patients resort to extemporaneous compounding that may further increase the number of adverse events and medical errors. In the management of dysphagia, increasing the bolus viscosity of medication such as fluid gels can be practiced. This study aimed to prepare and characterize the fluid gels as well as to estimate the cost of using fluid gels and compare it to the conventional practice of extemporaneous preparation of thickened liquid. Fluid gels were formulated using gellan gum and determined for physicochemical characteristics and in vitro drug release profile. The cost-based price of the fluid gel was estimated and compared to the cost of administering standard medication as well as administering thickened liquid using thickening powder. Fluid gels exhibited good physicochemical properties with the viscosity within nectar and honey consistency. A similar dissolution profile to the reference was observed for the 0.5% w/v gellan gum fluid gel and exhibiting the Higuchi release model. The price for 100 mL unit of 50 mg/mL paracetamol/acetaminophen and 20 mg/mL ibuprofen fluid gel was estimated to be about USD2.30 and USD2.37, respectively. A dose of 1000 mg paracetamol and 400 mg ibuprofen fluid gel was estimated to be about USD0.46 and USD0.47, respectively, which is lower than the cost of administering the same dose using extemporaneous thickened liquid. Fluid gels could be a cost-effective formulation for delivering medication in patients with dysphagia and can be developed on a profitable scale.

Co-delivery of hesperidin and clarithromycin in a nanostructured lipid carrier for the eradication of Helicobacter pylori in vitro

Effective and precise eradication of Helicobacter pylori (H. pylori) is the most promising approach to avoid H. pylori-related gastrointestinal disorders. The present study was conducted to demonstrate the efficacy of the co-delivery of hesperidin (Hesp) and clarithromycin (CLR) in nanostructured lipid carriers (NLCs) against H. pylori. We have produced a new delivery system by combining bioflavonoid Hesp and CLR NLCs to address the failure in single antibiotic therapies. Briefly, a blend of solid lipid, liquid lipid, and surfactant was used. Homogeneous NLCs with all the formulations showed a nano size and surface-negative charge and presented high in vitro stability and slow release of the drug even after 24 h. Bioimaging studies by scanning electron microscopy, transmission electron microscopy, and imaging flow cytometry indicated that NLCs interacted with the membrane by adhering to the outer cell membrane and disrupted the membrane that resulted in the leakage of cytoplasmic contents. The prepared NLCs provide sustained and controlled drug release that can be used to increase the rate of H. pylori eradication.

Development of Oral Chewable Tablets Containing Montelukast Nanoparticles for the Treatment of Childhood Asthma: Preclinical Study in Animal Model

The aim of the present study was to formulate oral chewable tablets of Montelukast (MTL) in the form of nanoparticles (NP’s). The MTL loaded NP’s were formulated by ionotropic external gelation method using tripolyphosphate (TPP) as crosslinking agent and Tween 60 as surfactant. NP’s were characterized for drug loading, encapsulation efficiency, surface morphology, saturation solubility, particle size, zeta potential and polydispersity index. The optimized NP formulation was used for development of chewable tablets using direct compression method. The prepared tablets were characterized for disintegration test, dissolution, thickness, hardness, friability and assay. The optimized formulation was evaluated in asthamatic animals to demonstrate the efficiency in asthama. The encapsulation efficiency of NP’s was found between 91.24 to 98.21% while drug loading was in the range of 10.09–14.25%. All formulations were found of nanosized in nature (110 to 200 nm) with excellent zeta potential (20.12 to 22.27 mV). PDI of all NP formulations were found within acceptable limit (less than 0.3). The nanoparticles were found spherical in shape with smooth surface. The saturation solubility of MTL was enhanced nearly 10 times (92 mg/ml) as compared to pure MTL saturation solubility. All physical parameters of the tablets were found within range. The optimized tablets showed disintegration time of 20 sec while other formulations showed DT in the rage of 35–57 sec. Tab1 (Optimized formulation) showed almost 100% MTL release from chewable tablets within the period of 30 min. Reduction in lung resistance (RI) was found in animals treated with Tab1. This reduction in RI was found nearly two fold and three fold as compare to MTL treated and control group animals. These observations clearly support the efficacy of chewable tablets containing nanoparticulate MTL in asthmatic animals.

Development of Inhalable Nanostructured Lipid Carriers for Ciprofloxacin for Noncystic Fibrosis Bronchiectasis Treatment

PURPOSE

Ciprofloxacin (CIP) has poor lung targeting after oral inhalation. This study developed optimized inhalable nanostructured lipid carriers (NLCs) for CIP to enhance deposition and accumulation in deeper parts of the lungs for treatment of noncystic fibrosis bronchiectasis (NCFB).

METHODS

NLC formulations based on stearic acid and oleic acid were successfully prepared by hot homogenization and in vitro-characterized. CIP-NLCs were formulated into nanocomposite micro particles (NCMPs) for administration in dry powder inhalation (DPI) formulations by spray-drying (SD) using different ratios of chitosan (CH) as a carrier. DPI formulations were evaluated for drug content and in vitro deposition, and their mass median aerodynamic diameter (MMAD), fine particle fraction (FPF), fine particle dose (FPD), and emitted dose (ED) were determined.

RESULTS

The CIP-NLCs were in the nanometric size range (102.3 ± 4.6 nm), had a low polydispersity index (0.267 ± 0.12), and efficient CIP encapsulation (98.75% ± 0.048%), in addition to a spherical and smooth shape with superior antibacterial activity. The in vitro drug release profile of CIP from CIP-NLCs showed 80% release in 10 h. SD of CIP-NLCs with different ratios of CH generated NCMPs with good yield (>65%). The NCMPs had a corrugated surface, but with increasing lipid:CH ratios, more spherical, smooth, and homogenous NCMPs were obtained. In addition, there was a significant change in the FPF with increasing lipid:CH ratios (P ˂ 0.05). NCMP-1 (lipid:CH = 1:0.5) had the highest FPD (45.0 µg) and FPF (49.2%), while NCMP-3 (lipid:CH = 1:1.5) had the lowest FPF (37.4%). All NCMP powders had an MMAD in the optimum size range of 3.9-5.1 μm.

CONCLUSION

Novel inhalable CIP NCMP powders are a potential new approach to improved target ability and delivery of CIP for NCFB treatment.

Preparation, Statistical Optimization and In-vitro Characterization of a Dry Powder Inhaler (DPI) Containing Solid Lipid Nanoparticles Encapsulating Amphotericin B: Ion Paired Complexes with Distearoyl Phosphatidylglycerol

The aim of this study was to prepare dry powder inhalers (DPIs) containing amphotericin B-loaded solid lipid nanoparticles (AMB-SLNs) as an alternative approach for prevention of pulmonary aspergillosis. For solubilizing AMB in small amounts of organic solvents ion paired complexes were firstly formed by establishing electrostatic interaction between AMB and distearoyl phosphatidylglycerol (DSPG). The SLN formulations containing AMB-DSPG complexes were prepared using glycerol monostearate (GMS) as the lipid matrix and soybean lecithin and tween 80 as the surfactants by solvent emulsification-evaporation technique. The nanoparticles were optimized through a fractional factorial design. DPIs were prepared by lyophilization technique using lactose as the inhalational carrier and then after, the formulations were evaluated in terms of aerodynamic particle size distribution using an Andersen cascade impactor. The morphology of the particles was examined using scanning electron microscopy (SEM) and in-vitro drug release profiles were evaluated. Following the statistical results, the particle size, Poly dispersity index (PdI), zeta potential, entrapment efficiency (EE%), and drug loading (DL%) of the optimized SLNs were 187.04 ± 11.97 nm, 0.188 ± 0.028, -30.16 ± 1.6 mV, 89.3 ± 3.47 % and 2.76 ± 0.32 %, respectively. Formulation containing 10% w/v of lactose with the calculated fine particle fraction value as 72.57 ± 4.33% exhibited the appropriate aerodynamic characteristics for pulmonary drug delivery. SEM images revealed de-agglomerated particles. In-vitro release studies showed sustained release of AMB from the carriers and the release kinetics were best fitted to the first order kinetic model.

Design, Synthesis, Anticancer Activity, and Solid Lipid Nanoparticle Formulation of Indole- and Benzimidazole-Based Compounds as Pro-Apoptotic Agents Targeting Bcl-2 Protein

Cancer is a multifactorial disease necessitating identification of novel targets for its treatment. Inhibition of Bcl-2 for triggered pro-apoptotic signaling is considered a promising strategy for cancer treatment. Within the current work, we aimed to design and synthesize a new series of benzimidazole- and indole-based derivatives as inhibitors of Bcl-2 protein. The market pan-Bcl-2 inhibitor, obatoclax, was the lead framework compound for adopted structural modifications. The obatoclax’s pyrrolylmethine linker was replaced with straight alkylamine or carboxyhydrazine methylene linkers providing the new compounds. This strategy permitted improved structural flexibility of synthesized compounds adopting favored maneuvers for better fitting at the Bcl-2 major hydrophobic pocket. Anti-cancer activity of the synthesized compounds was further investigated through MTT-cytotoxic assay, cell cycle analysis, RT-PCR, ELISA and DNA fragmentation. Cytotoxic results showed compounds 8a, 8b and 8c with promising cytotoxicity against MDA-MB-231/breast cancer cells (IC₅₀ = 12.69 ± 0.84 to 12.83 ± 3.50 µM), while 8a and 8c depicted noticeable activities against A549/lung adenocarcinoma cells (IC₅₀ = 23.05 ± 1.45 and 11.63 ± 2.57 µM, respectively). The signaling Bcl-2 inhibition pathway was confirmed by molecular docking where significant docking energies and interactions with key Bcl-2 pocket residues were depicted. Moreover, the top active compound, 8b, showed significant upregulated expression levels of pro-apoptotic/anti-apoptotic of genes; Bax, Bcl-2, caspase-3, -8, and -9 through RT-PCR assay. Improving the compound’s pharmaceutical profile was undertaken by introducing 8b within drug-solid/lipid nanoparticle formulation prepared by hot melting homogenization technique and evaluated for encapsulation efficiency, particle size, and zeta potential. Significant improvement was seen at the compound’s cytotoxic activity. In conclusion, 8b is introduced as a promising anti-cancer lead candidate that worth future fine-tuned lead optimization and development studies while exploring its potentiality through in-vivo preclinical investigation.

Development of Pomegranate Extract-Loaded Solid Lipid Nanoparticles: Quality by Design Approach to Screen the Variables Affecting the Quality Attributes and Characterization

The aim of this work was to study the influence of process variables on the quality attributes of pomegranate extract loaded solid lipid nanoparticles (PE-SLNs) using Plackett-Burman design. PE-SLN formulations were prepared by hot homogenization followed by ultra-sonication technique and evaluated based on the dependent variables that were analyzed utilizing Statgraphics Centurion XV software. The lipid and surfactant (type and concentration), co-surfactant concentration, sonication time, and amplitude were selected as the independent variables (X ₁-X ₇). The dependent parameters were particle size, polydispersity index, zeta potential, entrapment efficiency, and cumulative drug release (Y ₁-Y ₅). Response surface plots, Pareto charts, and mathematical equations were generated to study the influence of independent variables on the dependent quality parameters. Out of seven variables, X ₁, X ₂, and X ₆ have the main significant (p value < 0.05) effect on the entrapment efficiency, the cumulative drug release, the polydispersity index, respectively, while particle size was mainly affected by X ₃, X ₆ and zeta potential by X ₁, X ₃, and X ₄. Consequently, this screening study revealed that stearic acid as lipid, Tween 80 as surfactant, as well as sonication with short time and high amplitude can be selected for the development of PE-SLN formulation with minimum particle size, maximum zeta potential, highest entrapment, and sustained drug release behavior. Meanwhile, concentrations of lipid, surfactant, and co-surfactant are planned to be scaled up for further optimization study. In conclusion, the Plackett-Burman design verified its influence and significance in determining and understanding both process and formulation variables affecting the quality of PE-SLNs.

The effect of pulmonary surfactant on the airway smooth muscle after lipopolysaccharide exposure and its mechanisms

Pulmonary surfactant has a relaxing effect on the airway smooth muscle (ASM), which suggests its role in the pathogenesis of respiratory diseases associated with hyperreactivity of the ASM, such as asthma and chronic obstructive pulmonary disease (COPD). The ASM tone may be directly or indirectly modified by bacterial wall component lipopolysaccharide (LPS). This study elucidated the effect of LPS on the ASM reactivity and the role of surfactant in this interaction. The experiments were performed using ASM of adult guinea pigs by in vitro method of tissue organ bath (ASM unexposed-healthy or exposed to LPS under in vitro conditions) and ASM of animals intraperitoneally injected with LPS at a dose 1 mg/kg of b.w. once a day during 4-day period. Variable response of LPS was controlled by cyclooxygenase inhibitor indomethacin and relaxing effect of exogenous surfactant was studied using leukotriene and histamine receptor antagonists. The exogenous surfactant has relaxing effect on the ASM, but does not reverse LPS-induced smooth muscle contraction. The results further indicate participation of prostanoids and potential involvement of leukotriene and histamine H1 receptors in the airway smooth muscle contraction during LPS exposure.

Nanoparticle-mediated macrophage targeting-a new inhalation therapy tackling tuberculosis

Despite the potent clinical efficacy of linezolid (LNZ) against drug-resistant tuberculosis, its safety and tolerability remain of major concern. Our objective is to develop antitubercular inhalable LNZ nano-embedded microparticles. In this context, LNZ incorporated in non-structured lipid carriers (NLCs) was characterized in terms of colloidal, morphological, thermal, and release profiles. The potential of LNZ-NLCs to cross mucosal barriers and invade alveolar macrophages (AM, MH-S cells) was appraised. In vivo proof of concept was accomplished via orotracheal administration to mice. Respirable microparticles prepared by spray drying NLCs with diluents were assessed for their size, shape, flowability, aerosolization performance, and lung deposition pattern. NLCs (809-827 nm in size, zeta potential - 37.4 to - 58.9 mV) ensued 19% LNZ loading and pH-independent sustained release. Penetration studies revealed 73% LNZ crossing mucus within 1 h. Meanwhile, viability assay on A549 cells ensured an IC50 of 1.2 and 0.32 mg/mL for plain and LNZ-NLCs, respectively. CLSM confirmed phagocytosis of NLCs by MH-S macrophages, while H&E staining demonstrated NLC accumulation in murine AM in vivo with no signs of histopathological/biochemical changes. Bronchoalveolar lavage showed significantly low levels of LDH and total proteins (TP) for LNZ-NLCs highlighting their superior safety. Respirable microparticles embedding LNZ-NLCs ensured excellent aerosolization (MMAD 2 μm, FPF 93%) denoting perfect alveolar deposition. The developed inhalation therapy provided sustained LNZ release, mucus penetrability, potential safety in therapeutic doses, in vitro and in vivo macrophage targetability, and preferential deposition in the deep lung. Overall positive outcomes rely on reduced dose, dosing frequency, and per se superior safety circumventing systemic-associated life-threatening side effects. Graphical abstract.

Preparation and Evaluation of Carbamazepine Solid Lipid Nanoparticle for Alleviating Seizure Activity in Pentylenetetrazole-Kindled Mice

Objectives: The study aimed to prepare carbamazepine in solid lipid nanoparticle form (CBZ-SLN) in order to enhance its anticonvulsant effect. Method: Eight formulations of CBZ-SLNs were prepared by homogenization and ultra-sonication techniques. Results: The prepared CBZ-SLN showed a high entrapment efficiency% (39.66 ± 2.42%–71.91 ± 1.21%), a small particle size (45.11 ± 6.72–760.7 ± 5.25 nm), and a negative zeta potential (from −21.5 ± 1.02 to −38.4 ± 1.32 mv). The in vitro release study showed the slow release of CBZ from SLNs compared to CBZ aqueous dispersion (p < 0.05). The infrared spectroscopy and the thermal analysis revealed the compatibility of the drug with other ingredients and the presence of drug in the more soluble amorphous estate, respectively. The in vivo study on mice revealed that the CBZ-SLN had a higher anticonvulsant efficacy than CBZ aqueous dispersion after a lethal and chronic dose of pentylenetetrazole (PTZ) (p < 0.05). The histopathological examination of the hippocampus revealed a decrease in the percentage of degeneration in mice treated with the CBZ-SLN compared to the PTZ and CBZ groups. Conclusion: CBZ can be formulated as SLN with higher anticonvulsant activity than free CBZ aqueous dispersion.

Formulation of acyclovir-loaded solid lipid nanoparticles: design, optimization, and in-vitro characterization

The goal of this study was to design, optimize, and characterize Acyclovir-loaded solid lipid nanoparticles (ACV-SLNs) concerning particle size, zeta potential, entrapment efficiency, and release profile. Full factorial design (2³) was applied and the independent variables were surfactant type (Tween 80 and Pluronic F68), lipid type (Stearic acid and Compritol 888 ATO), and co-surfactant type (Lecithin and Sodium deoxycholate). The microemulsion technique was used followed by ultrasonication. The ACV-SLNs had a particle size range of about 172-542 nm. The polydispersity index (PDI) was found to be between 0.193 and 0.526. Zeta potential was in the range of -25.7 to -41.6 mV indicating good physical stability. Entrapment efficiency values were in the range of 56.3-80.7%. The drug release kinetics of the prepared formulations was best fitted to Higuchi diffusion model. After storing ACV-SLNs at refrigerated condition (5 ± 3 °C) and room temperature (25 ± 2 °C) for 4 weeks; we studied the change in the particle size, PDI, and zeta potential. The selected optimized formulation (F4) was containing Compritol, Pluronic F68, and Lecithin. These results indicated the successful application of this design to optimize the ACV-SLNs as a promising delivery system.

Development, Optimization, and In Vitro/In Vivo Characterization of Enhanced Lipid Nanoparticles for Ocular Delivery of Ofloxacin: the Influence of Pegylation and Chitosan Coating

This study aims to investigate whether modification of solid lipid nanoparticles (SLNs) with chitosan (CTS) and polyethylene glycol (PEG) coatings enhances corneal retention time and transcorneal bioavailability. Ofloxacin (OFLOX) was selected as the model drug because of its potential benefits for the treatment of local eye infections. The OFLOX-CTS-PEG-SLN was prepared by a modified emulsion/solvent evaporation technique. A central composite design was implemented to investigate the influence of total lipid/drug ratio, surfactant concentration, PEG stearate concentration in the lipid mixture, and CTS concentration on size, entrapment, transcorneal permeation, and adhesion to the corneal mucosal membrane. The optimized OFLOX-CTS-PEG-SLN was characterized for OFLOX cumulative percentage released in simulated tear fluid and permeated across the excised bovine corneal membrane. Moreover, nanoparticle morphology, eye irritation via histopathological analysis, and OFLOX concentration in the ocular fluids and tissues were determined. A total lipid/drug ratio of 19:1, Tween 80 of 2%, PEG stearate concentration in the lipid mixture (% w/w) of 2.6%, and CTS concentration (% w/v) of 0.23% produced 132.9 nm particles entrapping 74.8% of the total drug added. The particles detached from the corneal membrane at a force of 3700 dyne/cm². The %OFLOX released from the optimized nanoparticles was 63.3, and 66% of the drug permeated after 24 h. Compared to Oflox® drops, the optimized OFLOX-CTS-PEG-SLN exhibited similar tolerability but two- to threefold higher concentrations in the eyes of rabbits. Coating of SLN with chitosan and PEG augments the ocular bioavailability of OFLOX by increasing transcorneal permeation and enhancing mucoadhesion strength.

Fluconazole-loaded solid lipid nanoparticles topical gel for treatment of pityriasis versicolor: formulation and clinical study

Solid lipid nanoparticles (SLNs) are very potential formulations for topical delivery of antifungal drugs. Hence, the purpose of this research was to formulate the well-known antifungal agent Fluconazole (FLZ)-loaded SLNs topical gel to improve its efficiency for treatment of Pityriasis Versicolor (PV). FLZ-SLNs were prepared by modified high shear homogenization and ultrasonication method using different concentration of solid lipid (Compritol 888 ATO, Precirol ATO5) and surfactant (Cremophor RH40, Poloxamer 407). The physicochemical properties and the in vitro release study for all FLZ-SLNs were investigated. Furthermore, the optimized FLZ-SLN formula was incorporated into gel using Carpobol 934. A randomized controlled clinical trial (RCT) of potential batches was carried out on 30 well diagnosed PV patients comparing to market product Candistan® 1% cream. Follow up was done for 4 weeks by clinical and KOH examinations. The results showed that FlZ-SLNs were almost spherical shape having colloidal sizes with no aggregation. The drug entrapment efficiency ranged from 55.49% to 83.04%. The zeta potential values lie between -21 and -33 mV presenting good stability. FLZ showed prolonged in vitro release from SLNs dispersion and its Carbapol gel following Higuchi order equation. Clinical studies registered significant improvement (p < .05) in therapeutic response (1.4-fold; healing%, 4-fold; complete eradication) in terms of clinical cure and mycological cure rate from PV against marketed cream. Findings of the study suggest that the developed FLZ loaded SLNs topical gels have superior significant fast therapeutic index in treatment of PV over commercially available Candistan® cream.

A novel concept of overcoming the skin barrier using augmented liquid nanocrystals: Box-Behnken optimization, ex vivo and in vivo evaluation

Agomelatine suffers from extensive inactivation through 1^st pass effect with a limited oral bioavailability (5%). The aim of this study was to formulate and optimize liquid nanocrystals (LNC) containing agomelatine to enhance the transdermal permeation of the drug. The independent factors of the employed Box-Behnken design were the Pluronic F127, deoxycholic acid sodium salt and propylene glycol percentages. On the other hand, particle size, polydispersity index, zeta potential, entrapment efficiency, cumulative amount permeated at certain time intervals and permeation enhancement ratio were considered as dependent responses. The optimized formulation was composed of 1.5% Pluronic F127 and 1.5% deoxycholic acid sodium salt and it was found to have significantly higher AUC_0-24h, AUC_0-∞ and elimination t_1/2 than that of the employed reference indicating the enhancement of the drug permeation. The obtained findings indicated the ability of the optimized LNC formulation to improve the drug bioavailability after its transdermal application.

Development of Houttuynia cordata Extract-Loaded Solid Lipid Nanoparticles for Oral Delivery: High Drug Loading Efficiency and Controlled Release

Houttuynia cordata (H. cordata) has been used for diuresis and detoxification in folk medicine as well as a herbal medicine with antiviral and antibacterial activities. H. cordata extract-loaded solid lipid nanoparticles (H-SLNs) were prepared with various concentration of poloxamer 188 or poloxamer 407 by a hot homogenization and ultrasonication method. H-SLNs dispersion was freeze-dried with or without trehalose as a cryoprotectant. The physicochemical characteristics of H-SLNs were evaluated by dynamic laser scattering (DLS), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). Additionally, the in vitro release and in vitro cytotoxicity of H-SLNs were measured. Encapsulation efficiencies of H-SLNs (as quercitrin) were 92.9–95.9%. The SEM images of H-SLNs showed that H-SLNs have a spherical morphology. DSC and FT-IR showed that there were no interactions between ingredients. The increased extent of particle size of freeze-dried H-SLNs with trehalose was significantly lower than that of H-SLNs without trehalose. H-SLNs provided sustained release of quercitrin from H. cordata extracts. Cell viability of Caco-2 cells was over 70% according to the concentration of various formulation. Therefore, it was suggested that SLNs could be good carrier for administering H. cordata extracts.

Prolonged, acute suppression of cysteinyl leukotriene to reduce capsular contracture around silicone implants

We hypothesize that periodically early, local suppression of cysteinyl leukotrienes (CysLTs), which are potent inflammatory mediators, can reduce the fibrotic capsular contracture around silicone implants. We tested this hypothesis with the silicone implants enabled with the sustained release of montelukast, a CysLT receptor antagonist, for 3 and 15days. In this work, we inserted each of the distinct implants into the pocket of the subpanniculus carnosus plane of living rats and performed histological and immunofluorescent (IF) analyses of the tissues biopsied at predetermined periods for 12weeks after implant insertion. The implants with montelukast exhibited significantly reduced polymorphonuclear leukocytes (i.e., PMNs), implying a concurrent reduction of CysLT. This effect was more prominent after long-term local montelukast exposure. Thus, fewer fibroblasts were recruited, thereby reducing transforming growth factor (TGF)-β and myofibroblasts in the tissue around the implant. Therefore, the fibrotic capsule formation, which was assessed using the capsule thickness and collagen density, decreased along with the myofibroblasts. Additionally, the tissue biopsied at the experimental end point exhibited significantly decreased mechanical stiffness.

STATEMENT OF SIGNIFICANCE

Capsular contracture is troublesome, making the tissues hardened around the silicone implant. This causes serious pain and discomfort to the patients, often leading to secondary surgery for implant replacement. To resolve this, we suggest a strategy of long-term, local suppression of cysteinyl leukotriene, an important mediator present during inflammation. For this, we propose a silicone implant abled to release a drug, montelukast, in a sustained manner. We tested our drug-release implant in living animals, which exhibited a significant decrease in capsule formation compared with the intact silicone implant. Therefore, we conclude that the sustained release of montelukast at the local insertion site represents a promising way to reduce capsular contracture around silicone implants.

Development and evaluation of nanostructured lipid carrier-based hydrogel for topical delivery of 5-fluorouracil

The aim of this study was to develop a nanostructured lipid carrier (NLC)-based hydrogel and study its potential for the topical delivery of 5-fluorouracil (5-FU). Precirol® ATO 5 (glyceryl palmitostearate) and Labrasol® were selected as the solid and liquid lipid phases, respectively. Poloxamer 188 and Solutol® HS15 (polyoxyl-15-hydroxystearate) were selected as surfactants. The developed lipid formulations were dispersed in 1% Carbopol® 934 (poly[acrylic acid]) gel medium in order to maintain the topical application consistency. The average size, zeta potential, and polydispersity index for the 5-FU-NLC were found to be 208.32±8.21 nm, -21.82±0.40 mV, and 0.352±0.060, respectively. Transmission electron microscopy study revealed that 5-FU-NLC was <200 nm in size, with a spherical shape. In vitro drug permeation studies showed a release pattern with initial burst followed by sustained release, and the rate of 5-FU permeation was significantly improved for 5-FU-NLC gel (10.27±1.82 μg/cm2/h) as compared with plain 5-FU gel (2.85±1.12 μg/cm2/h). Further, skin retention studies showed a significant retention of 5-FU from the NLC gel (91.256±4.56 μg/cm2) as compared with that from the 5-FU plain gel (12.23±3.86 μg/cm2) in the rat skin. Skin irritation was also significantly reduced with 5-FU-NLC gel as compared with 5-FU plain gel. These results show that the prepared 5-FU-loaded NLC has high potential to improve the penetration of 5-FU through the stratum corneum, with enormous retention and with minimal skin irritation, which is the prerequisite for topically applied formulations.

Topical ketoprofen nanogel: artificial neural network optimization, clustered bootstrap validation, and in vivo activity evaluation based on longitudinal dose response modeling

OBJECTIVES

This work aimed at investigating the potential of solid lipid nanoparticles (SLN) as carriers for topical delivery of Ketoprofen (KP); evaluating a novel technique incorporating Artificial Neural Network (ANN) and clustered bootstrap for optimization of KP-loaded SLN (KP-SLN); and demonstrating a longitudinal dose response (LDR) modeling-based approach to compare the activity of topical non-steroidal anti-inflammatory drug formulations.

METHODS

KP-SLN was fabricated by a modified emulsion/solvent evaporation method. Box-Behnken design was implemented to study the influence of glycerylpalmitostearate-to-KP ratio, Tween 80, and lecithin concentrations on particle size, entrapment efficiency, and amount of drug permeated through rat skin in 24 hours. Following clustered bootstrap ANN optimization, the optimized KP-SLN was incorporated into an aqueous gel and evaluated for rheology, in vitro release, permeability, skin irritation and in vivo activity using carrageenan-induced rat paw edema model and LDR mathematical model to analyze the time course of anti-inflammatory effect at various application durations.

RESULTS

Lipid-to-drug ratio of 7.85 [bootstrap 95%CI: 7.63-8.51], Tween 80 of 1.27% [bootstrap 95%CI: 0.601-2.40%], and Lecithin of 0.263% [bootstrap 95%CI: 0.263-0.328%] were predicted to produce optimal characteristics. Compared with profenid® gel, the optimized KP-SLN gel exhibited slower release, faster permeability, better texture properties, greater efficacy, and similar potency.

CONCLUSIONS

SLNs are safe and effective permeation enhancers. ANN coupled with clustered bootstrap is a useful method for finding optimal solutions and estimating uncertainty associated with them. LDR models allow mechanistic understanding of comparative in vivo performances of different topical formulations, and help design efficient dermatological bioequivalence assessment methods.

Montelukast medicines of today and tomorrow: from molecular pharmaceutics to technological formulations

Montelukast sodium is a leukotriene antagonist of growing interest as an alternative therapy for asthma across different age groups due to its bronchoprotective, anti-inflammatory and anti-allergic properties. Currently, montelukast is commercialized only in oral solid dosage forms, which are the favorite of adult patients but may pose challenges in administration to children of young age or patients suffering from dysphagia. This review presents a comprehensive revision of scientific reports and patents on emerging strategies for the delivery of montelukast. A common ground to these reports is the pursue of an enhanced montelukast performance, by increasing its bioavailability and physico-chemical stability. A wide variety of strategies can be found, from the formation of supramolecular adducts with cyclodextrins to encapsulation in nanoparticles and liposomes. The new dosage forms for montelukast are designed for non-enteric absorption, some for absorption in the oral cavity and another two being for local action in the nasal mucosa or in the pulmonary epithelium. The review describes the emerging delivery strategies to circumvent the current limitations to the use of montelukast that are expected to ultimately lead to the development of more patient-compliant dosage forms.

Carvedilol nano lipid carriers: formulation, characterization and in-vivo evaluation

The purpose of this study was to develop Carvedilol nanostructured lipid carriers (CAR-NLCs) using stearic acid and oleic acid as lipid, and to estimate the potential as oral delivery system for poorly water soluble drug. The particle-size analysis revealed that all the developed formulations were within the nanometer range. The EE and loading were found to be between 69.45-88.56% and 9.58-12.56%, respectively. The CAR-NLCopt showed spherical morphology with smooth surface under transmission electron microscope (TEM). The crystallization of the drug in NLC was investigated by powder X-ray diffraction and differential scanning calorimetry (DSC) and revealed that the drug was in an amorphous state in the NLC matrix. The ex vivo gut permeation study showed many folds increment in the permeation of CAR-NLCs compared to Carvedilol suspension (CAR-S). The oral bioavailability study of CAR was carried out using Wistar rats and relative bioavailability of CAR-NLCopt was found to be 3.95 fold increased in comparison with CAR-S. In vivo antihypertensive study in Wistar rats showed significant reduction in mean systolic BP by CAR-NLCopt vis-à-vis CAR-S (p < 0.05) owing to the drug absorption through lymphatic pathways. In conclusion, the NLC formulation remarkably improved the oral bioavailability of CAR and demonstrated a promising perspective for oral delivery of poorly water-soluble drugs. The promising findings in this investigation suggest the practicability of these systems for the enhancement of bioavailability of CAR.

Application of Box-Behnken design for preparation of levofloxacin-loaded stearic acid solid lipid nanoparticles for ocular delivery: Optimization, in vitro release, ocular tolerance, and antibacterial activity

The aim of the present study was to develop and optimize levofloxacin loaded solid lipid nanoparticles for the treatment of conjunctivitis. Box-Behnken experimental design was applied for optimization of solid lipid nanoparticles. The independent variables were stearic acid as lipid (X1), Tween 80 as surfactant (X2) and sodium deoxycholate as co-surfactant (X3) while particle size (Y1) and entrapment efficiency (Y2) were the dependent variables. Further in vitro release and antibacterial activity in vitro were also performed. The optimized formulation of levofloxacin provides particle size of 237.82 nm and showed 78.71% entrapment efficiency and achieved flux 0.2,493 μg/cm(2)/h across excised goat cornea. In vitro release study showed prolonged drug release from the optimized formulation following Korsmeyer-Peppas model. Antimicrobial study revealed that the developed formulation possesses antibacterial activity against Staphylococcus aureus, and Escherichia coli equivalent to marketed eye drops. HET-CAM test demonstrated that optimized formulation was found to be non-irritant and safe for topical ophthalmic use. Our results concluded that solid lipid nanoparticles are an efficient carrier for ocular delivery of levofloxacin and other drugs.

Intracellular target delivery of 10-hydroxycamptothecin with solid lipid nanoparticles against multidrug resistance

The main objective of this study was to design a suitable drug delivery system for 10-hydroxycamptothecin (HCPT). In this study, HCPT-loaded solid lipid nanoparticle (HCPT-loaded SLN) was successfully prepared. The HCPT-loaded SLN was characterized by size, entrapment efficiency and drug release manner. The cytotoxicity of HCPT-loaded SLN was assessed in vitro using HepG2/HCPT cells and in vivo utilizing human tumor xenograft nude mouse model. HCPT-loaded SLN indicated the ability to target HepG2/HCPT cells and accumulated higher drug content in HepG2/HCPT cells. HCPT-loaded SLN enhanced the cytotoxicity of HCPT in a concentration-dependent manner. Based on these results, HCPT-loaded SLN suggested being a promising vehicle for liver-targeted drug delivery. Moreover, it can be of clinical interest to overcome multidrug resistance (MDR) effectively.

Follicular delivery of spironolactone via nanostructured lipid carriers for management of alopecia

Spironolactone (SL) is a US Food and Drug Administration-approved drug for the treatment of hypertension and various edematous conditions. SL has gained a lot of attention for treating androgenic alopecia due to its potent antiandrogenic properties. Recently, there has been growing interest for follicular targeting of drug molecules for treatment of hair and scalp disorders using nanocolloidal lipid-based delivery systems to minimize unnecessary systemic side effects associated with oral drug administration. Accordingly, the objective of this study is to improve SL efficiency and safety in treating alopecia through the preparation of colloidal nanostructured lipid carriers (NLCs) for follicular drug delivery. SL-loaded NLCs were prepared by an emulsion solvent diffusion and evaporation method using 23 full factorial design. All of the prepared formulations were spherical in shape with nanometric size range (215.6–834.3 nm) and entrapment efficiency >74%. Differential scanning calorimetry thermograms and X-ray diffractograms revealed that SL exists in amorphous form within the NLC matrices. The drug release behavior from the NLCs displayed an initial burst release phase followed by sustained release of SL. Confocal laser scanning microscopy confirmed the potential of delivering the fluorolabeled NLCs within the follicles, suggesting the possibility of using SL-loaded NLCs for localized delivery of SL into the scalp hair follicles.

Compritol 888 ATO: a multifunctional lipid excipient in drug delivery systems and nanopharmaceuticals

INTRODUCTION

Compritol® 888 ATO is a lipid excipient that is generally used in cosmetic industry as a surfactant, emulsifying agent and viscosity-inducing agent in emulsions or creams. Based on its chemical composition, Compritol 888 ATO is a blend of different esters of behenic acid with glycerol.

AREAS COVERED

Recently, there has been great interest in the multiple roles that Compritol 888 ATO plays in various pharmaceutical delivery systems. Accordingly, this review aimed at summarizing the current and potential applications of Compritol 888 ATO in various drug delivery areas.

EXPERT OPINION

Different researches have highlighted the feasibility of using Compritol 888 ATO as a lubricant or coating agent for oral solid dosage formulations. It has also been explored as a matrix-forming agent for controlling drug release. At present, the most common pharmaceutical application of Compritol 888 ATO is in lipid-based colloidal drug delivery system such as solid lipid microparticles, solid lipid nanoparticles and nanostructured lipid carriers. Although, Compritol 888 ATO has acceptable regulatory and safety profiles and although the number of articles that emphasize on its applicability as an innovative excipient in pharmaceutical technology is continuously increasing, it is not widely used in the pharmaceutical market products and its use is limited to its sustain release ability in extended release tablets.

Montelukast-loaded nanostructured lipid carriers: part I oral bioavailability improvement

The purpose of the study was to formulate montelukast-loaded nanostructured lipid carrier (MNLC) to improve its systemic bioavailability, avoid hepatic metabolism and reduce hepatic cellular toxicity due to metabolites. MNLC was prepared using melt-emulsification-homogenization method. Preformulation study was carried out to evaluate drug-excipient compatibility. MNLCs were prepared using spatially different solid and liquid lipid triglycerides. CAE (DL-Pyrrolidonecarboxylic acid salt of L-cocyl arginine ethyl ester), a cationic, biodegradable, biocompatible surfactant was used to stabilize the system. MNLCs were characterized by FTIR, XRPD and DSC to evaluate physicochemical properties. MNLCs having a particle size of 181.4 ± 6.5 nm with encapsulation efficiency of 96.13 ± 0.98% were prepared. FTIR findings demonstrated no interaction between the drug and excipients of the formulation which could lead to asymmetric vibrations. DSC and XRPD study confirmed stable amorphous form of the montelukast in lipid matrix. In vitro release study revealed sustained release over a period of 24 h. In vivo single dose oral pharmacokinetic study demonstrated 143-fold improvement in bioavailability as compared to montelukast-aqueous solution. Thus, the result of this study implies that developed MNLC formulation be suitable to sustain the drug release with improvement in the bioavailability.

Formulation and delivery of itraconazole to the brain using a nanolipid carrier system

The objectives of this study were to develop and characterize itraconazole (ITZ)-loaded nanostructured lipid carriers (NLCs) and to study their potential for drug delivery into the brain. Precirol^® ATO 5 and Transcutol^® HP were selected as the lipid phase, and Tween^® 80 and Solutol^® HS15 as surfactants. The ITZ-NLCs were prepared by a hot and high-pressure homogenization method. The entrapment efficiency for the best formulation batch was analyzed using high-performance liquid chromatography and was found to be 70.5%±0.6%. The average size, zeta potential, and polydispersity index for the ITZ-NLCs used for animal studies were found to be 313.7±15.3 nm, −18.7±0.30 mV, and 0.562±0.070, respectively. Transmission electron microscopy confirmed that ITZ-NLCs were spherical in shape, with a size of less than 200 nm. Differential scanning calorimetry and X-ray diffractometry analysis showed that ITZ was encapsulated in the lipid matrix and present in the amorphous form. The in vitro release study showed that ITZ-NLCs achieved a sustained release, with cumulative release of 80.6%±5.3% up to 24 hours. An in vivo study showed that ITZ-NLCs could increase the ITZ concentration in the brain by almost twofold. These results suggest that ITZ-NLCs can be exploited as nanocarriers to achieve sustained release and brain-targeted delivery.