Advancements in practical and scientific bioanalytical approaches to metabolism studies in drug development

Advancement in metabolism profiling approaches and bioanalytical techniques has been revolutionized over the last two decades. Different in vitro and in vivo approaches along with advanced bioanalytical techniques are enabling the accurate qualitative and quantitative analysis of metabolites. This review summarizes various modern in vitro and in vivo approaches for executing metabolism studies with special emphasis on the recent advancement in the field. Advanced bioanalytical techniques, which can be employed in metabolism studies, have been discussed suggesting their particular application based on specific study objectives. This article can efficiently guide the researchers to scientifically plan metabolism studies and their bioanalysis during drug development programs taking advantage of a detailed understanding of instances of failure in the past.

Phase 0/microdosing approaches: time for mainstream application in drug development?

Phase 0 approaches - which include microdosing - evaluate subtherapeutic exposures of new drugs in first-in-human studies known as exploratory clinical trials. Recent progress extends phase 0 benefits beyond assessment of pharmacokinetics to include understanding of mechanism of action and pharmacodynamics. Phase 0 approaches have the potential to improve preclinical candidate selection and enable safer, cheaper, quicker and more informed developmental decisions. Here, we discuss phase 0 methods and applications, highlight their advantages over traditional strategies and address concerns related to extrapolation and developmental timelines. Although challenges remain, we propose that phase 0 approaches be at least considered for application in most drug development scenarios.

A phase I, open-label, single-dose micro tracer mass balance study of 14C-labeled ASP7991 in healthy Japanese male subjects using accelerator mass spectrometry

ASP7991 is a calcimimetic that acts on the calcium-sensing receptor on parathyroid cell membranes and suppresses parathyroid hormone (PTH) secretion in the treatment of secondary hyperparathyroidism. The mass balance and metabolite profile of [¹⁴C]ASP7991 were investigated in six healthy male subjects after a single oral dose of [¹⁴C]ASP7991 [1 mg, 18.5 kBq (500 nCi)] in solution. [¹⁴C] radioactivity in plasma, urine and feces was analyzed using Accelerator mass spectrometry. ASP7991 was rapidly absorbed, metabolized and excreted. Mean recovery of [¹⁴C] radioactivity in urine and feces was 30.08% and 49.31%, respectively, and mean total recovery of [¹⁴C] radioactivity was 79.39%. The majority of [¹⁴C] radioactivity in urine and feces was excreted within the first 72 h following administration. Seven metabolites were detected in plasma, urine and feces samples, and their structures were determined by mass spectrometry. The main metabolic pathways of ASP7991 in humans were predicted to be N-dealkylation, followed by N-acetylation and taurine conjugation to a carboxylic acid moiety. Our findings show that a mass balance study using micro radioactivity doses is suitable for elucidating the pharmacokinetics of the absorption, metabolism and excretion of administered drugs.

Evaluation of cAMS for 14C microtracer ADME studies: opportunities to change the current drug development paradigm

Aim: Although regulatory guidances require human metabolism information of drug candidates early in the development process, the human mass balance study (or hADME study), is performed relatively late. hADME studies typically involve the administration of a 14C-radiolabelled drug where biological samples are measured by conventional scintillation counting analysis. Another approach is the administration of therapeutic doses containing a 14C-microtracer followed by accelerator mass spectrometry (AMS) analysis, enabling hADME studies completion much earlier. Consequently, there is an opportunity to change the current drug development paradigm. Materials & methods: To evaluate the applicability of the MICADAS–cAMS method, we successfully performed: the validation of MICADAS–cAMS for radioactivity quantification in biomatrices and, a rat ADME study, where the conventional methodology was assessed against a microtracer MICADAS–cAMS approach. Results & discussion: Combustion AMS (cAMS) technology is applicable to microtracer studies. A favorable opinion from EMA to complete the hADME in a Phase I setting was received, opening the possibilities to change drug development.

Absorption, metabolism and excretion of [14C]omarigliptin, a once-weekly DPP-4 inhibitor, in humans

1. Omarigliptin (MARIZEV®) is a once-weekly DPP-4 inhibitor approved in Japan for the treatment of type 2 diabetes. The objective of this study was to investigate the absorption, metabolism and excretion of omarigliptin in humans. 2. Six healthy subjects received a single oral dose of 25 mg (2.1 μCi) [¹⁴C]omarigliptin. Blood, plasma, urine and fecal samples were collected at various intervals for up to 20 days post-dose. Radioactivity levels in excreta and plasma/blood samples were determined by accelerator mass spectrometry (AMS). 3. [¹⁴C]Omarigliptin was rapidly absorbed, with peak plasma concentrations observed at 0.5-2 h post-dose. The majority of the radioactivity was recovered in urine (∼74.4% of the dose), with less recovered in feces (∼3.4%), suggesting the compound was well absorbed. 4. Omarigliptin was the major component in urine (∼89% of the urinary radioactivity), indicating renal excretion of the unchanged drug as the primary clearance mechanism. Omarigliptin accounted for almost all the circulating radioactivity in plasma, with no major metabolites detected. 5. The predominantly renal elimination pathway, combined with the fact that omarigliptin is not a substrate of key drug transporters, suggest omarigliptin is unlikely to be subject to pharmacokinetic drug-drug interactions with other commonly prescribed agents.

An Accelerator Mass Spectrometry-Enabled Microtracer Study to Evaluate the First-Pass Effect on the Absorption of YH4808

¹⁴ C-labeled YH4808, a novel potassium-competitive acid blocker, was intravenously administered as a microtracer at 80 μg (11.8 kBq or 320 nCi) concomitantly with the nonradiolabeled oral drug at 200 mg to determine the absolute bioavailability and to assess the effect of pharmacogenomics on the oral absorption of YH4808. The absolute bioavailability was low and highly variable (mean, 10.1%; range, 2.3-19.3%), and M3 and M8, active metabolites of YH4808, were formed 22.6- and 38.5-fold higher after oral administration than intravenous administration, respectively. The product of the fraction of an oral YH4808 dose entering the gut wall and the fraction of YH4808 passing on to the portal circulation was larger in subjects carrying the variants of the CHST3, SLC15A1, and SULT1B1 genes. A combined LC+AMS is a useful tool to construct a rich and highly informative pharmacokinetic knowledge core in early clinical drug development at a reasonable cost.

The impact of early human data on clinical development: there is time to win

Modern accelerator mass spectrometry (AMS) methods enable the routine application of this technology in drug development. By the administration of a (14)C-labelled microdose or microtrace, pharmacokinetic (PK) data, such as mass balance, metabolite profiling, and absolute bioavailability (AB) data, can be generated easier, faster, and at lower costs. Here, we emphasize the advances and impact of this technology for pharmaceutical companies. The availability of accurate intravenous (iv) PK and human absorption, distribution, metabolism, and excretion (ADME) information, even before or during Phase I trials, can improve the clinical development plan. Moreover, applying the microtrace approach during early clinical development might impact the number of clinical pharmacology and preclinical safety pharmacology studies required, and shorten the overall drug discovery program.

Opportunities in low-level radiocarbon microtracing: applications and new technology

¹⁴C-radiolabeled (radiocarbon) drug studies are central to defining the disposition of therapeutics in clinical development. Concerns over radiation, however, have dissuaded investigators from conducting these studies as often as their utility may merit. Accelerator mass spectrometry (AMS), originally designed for carbon dating and geochronology, has changed the outlook for in-human radiolabeled testing. The high sensitivity of AMS affords human clinical testing with vastly reduced radiative (microtracing) and chemical exposures (microdosing). Early iterations of AMS were unsuitable for routine biomedical use due to the instruments' large size and associated per sample costs. The situation is changing with advances in the core and peripheral instrumentation. We review the important milestones in applied AMS research and recent advances in the core technology platform. We also look ahead to an entirely new class of ¹⁴C detection systems that use lasers to measure carbon dioxide in small gas cells.

Bioanalytical approaches for characterizing catabolism of antibody–drug conjugates

The in vivo stability and catabolism of antibody–drug conjugates (ADCs) directly impact their PK, efficacy and safety, and metabolites of the cytotoxic or small molecule drug component of an ADC can further complicate these factors. This perspective highlights the importance of understanding ADC catabolism and the associated bioanalytical challenges. We evaluated different bioanalytical approaches to qualitatively and quantitatively characterize ADC catabolites. Here we review and discuss the rationale and experimental strategies used to design bioanalytical assays for characterization of ADC catabolism and supporting ADME studies during ADC clinical development. This review covers both large and small molecule approaches, and uses examples from Kadcyla® (T-DM1) and a THIOMAB™ antibody–drug conjugate to illustrate the process.

Human in Vivo Pharmacokinetics of [(14)C]Dibenzo[def,p]chrysene by Accelerator Mass Spectrometry Following Oral Microdosing

Dibenzo(def,p)chrysene (DBC), (also known as dibenzo[a,l]pyrene), is a high molecular weight polycyclic aromatic hydrocarbon (PAH) found in the environment, including food, produced by the incomplete combustion of hydrocarbons. DBC, classified by IARC as a 2A probable human carcinogen, has a relative potency factor (RPF) in animal cancer models 30-fold higher than benzo[a]pyrene. No data are available describing the disposition of high molecular weight (>4 rings) PAHs in humans to compare to animal studies. Pharmacokinetics of DBC was determined in 3 female and 6 male human volunteers following oral microdosing (29 ng, 5 nCi) of [(14)C]-DBC. This study was made possible with highly sensitive accelerator mass spectrometry (AMS), capable of detecting [(14)C]-DBC equivalents in plasma and urine following a dose considered of de minimus risk to human health. Plasma and urine were collected over 72 h. The plasma Cmax was 68.8 ± 44.3 fg·mL(-1) with a Tmax of 2.25 ± 1.04 h. Elimination occurred in two distinct phases: a rapid (α)-phase, with a T1/2 of 5.8 ± 3.4 h and an apparent elimination rate constant (Kel) of 0.17 ± 0.12 fg·h(-1), followed by a slower (β)-phase, with a T1/2 of 41.3 ± 29.8 h and an apparent Kel of 0.03 ± 0.02 fg·h(-1). In spite of the high degree of hydrophobicity (log Kow of 7.4), DBC was eliminated rapidly in humans, as are most PAHs in animals, compared to other hydrophobic persistent organic pollutants such as, DDT, PCBs and TCDD. Preliminary examination utilizing a new UHPLC-AMS interface, suggests the presence of polar metabolites in plasma as early as 45 min following dosing. This is the first in vivo data set describing pharmacokinetics in humans of a high molecular weight PAH and should be a valuable addition to risk assessment paradigms.

Selected scientific topics of the 11th International Isotope Symposium on the Synthesis and Applications of Isotopes and Isotopically Labeled Compounds

This micro-review describes hot topics and new trends in isotope science discussed at the 11th International Isotope Symposium on the Synthesis and Applications of Isotopes and Isotopically Labeled Compounds from a personal perspective.

Bioanalytical aspects of clinical mass balance studies in oncology

Clinical mass balance studies aim to investigate the absorption, distribution, metabolism and excretion (ADME) of a(n) (often radiolabeled) drug, following a single administration to humans. They are perfectly suited to determine the disposition and major metabolic pathways of a drug, the exposure to the parent drug and its metabolites, and the rate and route of elimination. A mass balance study, however, poses interesting challenges to the analysis of parent drug and metabolites in different biological matrices. Using recent clinical mass balance studies in oncology as an example, this review focuses on the aspects of mass balance studies, from bioanalytical assay development, analysis of clinical samples to reporting of study results. Along the way, it discusses bioanalytical problems and practical solutions.

Accelerator MS: its role as a frontline bioanalytical technique

Accelerator MS (AMS) is an ultrasensitive technique that can be used to quantify 14C in biological samples. Prior to analysis, the carbon in samples is selectively isolated, with the result that the technique is independent of compound structure and nonsusceptible to matrix effects. AMS is a tracer technique and therefore can be used to quantify all compound-related material without the need to develop extraction or chromatographic separation methods. Thus AMS has some distinct advantages over conventional assay techniques, such as LC–MS/MS. AMS also complements conventional techniques, facilitating innovative, cost-effective clinical study designs. Thus, metabolism data can be obtained from early clinical trials, identifying any human metabolites that may raise safety concerns. By administration of an intravenous 14C microtracer dose concomitantly with an extravascular dose of nonradiolabeled compound, AMS can also be used to determine absolute bioavailability and intravenous pharmacokinetic parameters without the need for intravenous toxicology or formulation development.

LC–MS/MS bioanalytical challenge: ultra-high sensitivity assays

Anne-Françoise Aubry is Director of Bioanalytical Sciences at Bristol-Myers Squibb Co., leading a team in developing bioanalytical methods for early development drug candidates in support of toxicology and clinical studies. Her main research interests are high-speed, high-resolution LC and new approaches for LC–MS/MS drug bioanalysis in regulated laboratories. Anne Aubry is on the executive board of the Eastern Analytical Symposium and on the organizing committee of the Applied Pharmaceutical Analysis and Chemical and Pharmaceutical Structure Analysis (Shanghai 2011) conferences.

The challenges of developing and running low pg/ml LC–MS/MS bioanalytical assays in a regulated laboratory are reviewed. The practical problems encountered in implementing ultrasensitive assays are less in reaching a suitable sensitivity on the instrument than in implementing procedures to control losses and contamination, eliminate matrix interferences and ensure assay robustness so that the assay can be validated to industry standards. Solutions to these problems can be found in each of the three facets of the bioanalytical assay: the sample preparation, the chromatographic separation and the mass spectrometric detection. The key to developing an ultrasensitive assay is to optimize each of these elements. Progress in MS instrumentation has been essential in our ability to reach the low pg/ml limits.

Quantifying exploratory low dose compounds in humans with AMS

Accelerator Mass Spectrometry is an established technology whose essentiality extends beyond simply a better detector for radiolabeled molecules. Attomole sensitivity reduces radioisotope exposures in clinical subjects to the point that no population need be excluded from clinical study. Insights in human physiochemistry are enabled by the quantitative recovery of simplified AMS processes that provide biological concentrations of all labeled metabolites and total compound related material at non-saturating levels. In this paper, we review some of the exploratory applications of AMS (14)C in toxicological, nutritional, and pharmacological research. This body of research addresses the human physiochemistry of important compounds in their own right, but also serves as examples of the analytical methods and clinical practices that are available for studying low dose physiochemistry of candidate therapeutic compounds, helping to broaden the knowledge base of AMS application in pharmaceutical research.

AMS method validation for quantitation in pharmacokinetic studies with concomitant extravascular and intravenous administration

A technique has emerged in the past few years that has enabled a drug’s intravenous pharmacokinetics to be readily obtained in humans without having to conduct extensive toxicology studies by this route of administration or expend protracted effort in formulation. The technique involves the intravenous administration of a low dose of 14C-labelled drug (termed a tracer dose) concomitantly with a non-labelled extravascular dose given at therapeutically levels. Plasma samples collected over time are analysed to determine the total parent drug concentration by LC–MS (which essentially measures that arising from the oral dose) and by LC followed by accelerator mass spectrometry (AMS) to determine the 14C-drug concentration (i.e., that arising from the intravenous dose). There are currently no published accounts of how the principles of bioanalytical validation might be applied to intravenous studies using AMS as an analytical technique. The authors describe the primary elements of AMS when used with LC seperation and how this off-line technique differs from LC–MS. They then discuss how the principles of bioanalytical validation might be applied to determine selectivity, accuracy, precision and stability of methods involving LC followed by AMS analysis.

Sensitive determination of a pharmaceutical compound and its metabolites in human plasma by ultra-high performance liquid chromatography-tandem mass spectrometry with on-line solid-phase extraction

This paper describes the determination of a drug candidate and two metabolites in human plasma by column-switching LC-MS/MS after protein precipitation. Starting from a standard method with a quantitation limit of 0.5 ng/mL, a highly sensitive assay was developed, employing UHPLC separation and detection on an API 5000 mass spectrometer. The injected plasma equivalent was increased from 6 to 20 μL; conventional column trapping for compound enrichment and removal of matrix constituents was combined with high-pressure analytical separation using small particle columns to improve resolution and signal-to-noise ratio. Quantitation limits were thus lowered to between 5 and 20 pg/mL, offering the possibility to provide bioanalytical support for microdosing studies in humans. Excellent assay quality and robustness were achieved by both methods.