Influence of Extracellular Matrix Components on the Differentiation of Periodontal Ligament Stem Cells in Collagen I Hydrogel

Regeneration of periodontal tissues requires an integrated approach to the restoration of the periodontal ligament, cementum, and alveolar bone surrounding the teeth. Current strategies in endogenous regenerative dentistry widely use biomaterials, in particular the decellularized extracellular matrix (dECM), to facilitate the recruitment of populations of resident cells into damaged tissues and stimulate their proliferation and differentiation. The purpose of our study was to evaluate the effect of the exogenous components of the extracellular matrix (hyaluronic acid, laminin, fibronectin) on the differentiation of periodontal ligament stem cells (PDLSCs) cultured with dECM (combinations of decellularized tooth matrices and periodontal ligament) in a 3D collagen I hydrogel. The immunohistochemical expression of various markers in PDLSCs was assessed quantitatively and semi-quantitatively on paraffin sections. The results showed that PDLSCs cultured under these conditions for 14 days exhibited phenotypic characteristics consistent with osteoblast-like and odontoblast-like cells. This potential has been demonstrated by the expression of osteogenic differentiation markers (OC, OPN, ALP) and odontogenic markers (DSPP). This phenomenon corresponds to the in vivo state of the periodontal ligament, in which cells at the interface between bone and cementum tend to differentiate into osteoblasts or cementoblasts. The addition of fibronectin to the dECM most effectively induces the differentiation of PDLSCs into osteoblast-like and odontoblast-like cells under 3D culture conditions. Therefore, this bioengineered construct has a high potential for future use in periodontal tissue regeneration.

Application of regenerative medicine and 3d bioprinting in urology

In the last two decades, a new purpose has collected great efforts from scientists in all branches of medicine. It is about the possibility to make the body regenerate ill tissues and organs by itself with de right artificial stimuli or the construction of new functional organs to replace the damaged ones. This process comprises various interdisciplinary approaches to healthcare, such as tissue engineering, molecular medicine, biotechnology, and three-dimensional printing. Urologists have been remarkably active in this field of medicine called Regenerative Medicine. The searching of the different requirements like suitable and compatible biomaterials, versatile cells, adequate techniques to construct tissues, available biomolecules, and the knowledge of all these minimizing risks, are some of the aims and the approximations until now. Despite many obstacles, in vitro and in vivo studies are already showing encouraging options. We will review the advances related to the bladder, urethra, ureter, and kidneys. Difficulties such as ethical issues, time investment and high costs, have been some of the drawbacks encountered. Further studies are still required for its clinical application in daily life.

Physico-Chemical Properties and Biocompatibility of Thermosensitive Chitosan Lactate and Chitosan Chloride Hydrogels Developed for Tissue Engineering Application

Recently, the modification of the initial structure of biopolymers, mainly chitosan, has been gaining importance with a view to obtain functional forms with increased practicality and specific properties enabling their use in tissue engineering. Therefore, in this article, the properties (structural and biological) of thermosensitive hydrogels obtained from chitosan lactate/chloride and two types of crosslinking agents (β-glycerol phosphate disodium salt pentahydrate and uridine 5'-monophosphate disodium salt) are discussed. The aim of the research is to identify changes in the structure of the biomaterials during conditioning in water. Structural investigations were carried out by FTIR spectroscopy. The crystallinity of gels was determined by X-ray diffraction analysis. The biocompatibility (evaluation of cytotoxicity and genotoxicity) of chitosan hydrogels was investigated by contact with human colon adenocarcinoma cell line for 48 h. The cytotoxicity was verified based on the colorimetric resazurin assay, and the genotoxicity was checked by the comet assay (percentage of DNA in the comet tail). The conducted research showed that the analyzed types of chitosan hydrogels are non-cytotoxic and non-genotoxic materials. The good biocompatibility of chitosan hydrogels surfaces makes them interesting scaffolds with clinical potential in tissue regeneration engineering.

Oxygen Plasma Treated-Electrospun Polyhydroxyalkanoate Scaffolds for Hydrophilicity Improvement and Cell Adhesion

Poly(hydroxyalkanoates) (PHAs) with differing material properties, namely, the homopolymer poly(3-hydroxybutyrate), P(3HB), the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), P(3HB-co-3HV), with a 3HV content of 25 wt.% and a medium chain length PHA, and mcl-PHA, mainly composed of 3-hydroxydecanoate, were studied as scaffolding material for cell culture. P(3HB) and P(3HB-co-3HV) were individually spun into fibers, as well as blends of the mcl-PHA with each of the scl-PHAs. An overall biopolymer concentration of 4 wt.% was used to prepare the electrospinning solutions, using chloroform as the solvent. A stable electrospinning process and good quality fibers were obtained for a solution flow rate of 0.5 mL h⁻¹, a needle tip collector distance of 20 cm and a voltage of 12 kV for P(3HB) and P(3HB-co-3HV) solutions, while for the mcl-PHA the distance was increased to 25 cm and the voltage to 15 kV. The scaffolds’ hydrophilicity was significantly increased under exposure to oxygen plasma as a surface treatment. Complete wetting was obtained for the oxygen plasma treated scaffolds and the water uptake degree increased in all treated scaffolds. The biopolymers crystallinity was not affected by the electrospinning process, while their treatment with oxygen plasma decreased their crystalline fraction. Human dermal fibroblasts were able to adhere and proliferate within the electrospun PHA-based scaffolds. The P(3HB-co-3HV): mcl-PHA oxygen plasma treated scaffold highlighted the most promising results with a cell adhesion rate of 40 ± 8%, compared to 14 ± 4% for the commercial oxygen plasma treated polystyrene scaffold Alvetex^TM. Scaffolds based on P(3HB-co-3HV): mcl-PHA blends produced by electrospinning and submitted to oxygen plasma exposure are therefore promising biomaterials for the development of scaffolds for tissue engineering.

The Role of Scaffolds in Tendon Tissue Engineering

Tendons are unique forms of connective tissue aiming to transmit the mechanical force of muscle contraction to the bones. Tendon injury may be due to direct trauma or might be secondary to overuse injury and age-related degeneration, leading to inflammation, weakening and subsequent rupture. Current traditional treatment strategies focus on pain relief, reduction of the inflammation and functional restoration. Tendon repair surgery can be performed in people with tendon injuries to restore the tendon's function, with re-rupture being the main potential complication. Novel therapeutic approaches that address the underlying pathology of the disease is warranted. Scaffolds represent a promising solution to the challenges associated with tendon tissue engineering. The ideal scaffold for tendon tissue engineering needs to exhibit physiologically relevant mechanical properties and to facilitate functional graft integration by promoting the regeneration of the native tissue.

Epidermal growth factor and three-dimensional scaffolds provide conducive environment for differentiation of mouse embryonic stem cells into oocyte-like cells

Three-dimensional (3D) culture provides a biomimicry of the naive microenvironment that can support cell proliferation, differentiation, and regeneration. Some growth factors, such as epidermal growth factor (EGF), facilitate normal meiosis during oocyte maturation in vivo. In this study, a scaffold-based 3D coculture system using purified alginate was applied to induce oocyte differentiation from mouse embryonic stem cells (mESCs). mESCs were induced to differentiate into oocyte-like cells using embryoid body protocol in the two-dimensional or 3D microenvironment in vitro. To increase the efficiency of the oocyte-like cell differentiation from mESCs, we employed a coculture system using ovarian granulosa cells in the presence or absence of epidermal growth factor (+EGF or -EGF) for 14 days and then the cells were assessed for germ cell differentiation, meiotic progression, and oocyte maturation markers. The cultures exposed to EGF in the alginate-based 3D microenvironment showed the highest level of premeiotic (Oct4 and Mvh), meiotic (Scp1, Scp3, Stra8, and Rec8), and oocyte maturation (Gdf9, Cx37, and Zp2) marker genes (p < .05) in comparison to other groups. According to the gene-expression patterns, we can conclude that alginate-based 3D coculture system provided a highly efficient protocol for oocyte-like cell differentiation from mESCs. The data showed that this culture system along with EGF improved the rate of in vitro oocyte-like cell differentiation.

Ultrasonic mixing chamber as an effective tool for the biofabrication of fully graded scaffolds for interface tissue engineering

One of the main challenges of the interface-tissue engineering is the regeneration of diseased or damaged interfacial native tissues that are heterogeneous both in composition and in structure. In order to achieve this objective, innovative fabrication techniques have to be investigated. This work describes the design, fabrication, and validation of a novel mixing system to be integrated into a double-extruder bioprinter, based on an ultrasonic probe included into a mixing chamber. To validate the quality and the influence of mixing time, different nanohydroxyapatite–gelatin samples were printed. Mechanical characterization, micro-computed tomography, and thermogravimetric analysis were carried out. Samples obtained from three-dimensional bioprinting using the mixing chamber were compared to samples obtained by deposition of the same final solution obtained by manually operated ultrasound probe, showing no statistical differences. Results obtained from samples characterization allow to consider the proposed mixing system as a promising tool for the fabrication of graduated structures which are increasingly being used in interface-tissue engineering.

A Poroelastic Model of a Fibrous-Porous Tissue Engineering Scaffold

Tissue engineering scaffolds are used in conjunction with stem cells for the treatment of various diseases. A number of factors provided by the scaffolds affect the differentiation of stem cells. Mechanical cues that are part of the natural cellular microenvironment can both accelerate the differentiation toward particular cell lineages or induce differentiation to an alternative cell fate. Among such factors, there are externally applied strains and mechanical (stiffness and relaxation time) properties of the extracellular matrix. Here, the mechanics of a fibrous-porous scaffold is studied by applying a coordinated modeling and experimental approach. A force relaxation experiment is used, and a poroelastic model associates the relaxation process with the fluid diffusion through the fibrous matrix. The model parameters, including the stiffness moduli in the directions along and across the fibers as well as fluid diffusion time, are estimated by fitting the experimental data. The time course of the applied force is then predicted for different rates of loading and scaffold porosities. The proposed approach can help in a reduction of the technological and experimental efforts to produce 3-D scaffolds for regenerative medicine as well as in a higher accuracy of the estimation of the local factors sensed by stem cells.

Regulation of Scaffold Cell Adhesion Using Artificial Membrane Binding Proteins

The rapid pace of development in biotechnology has placed great importance on controlling cell-material interactions. In practice, this involves attempting to decouple the contributions from adhesion molecules, cell membrane receptors, and scaffold surface chemistry and morphology, which is extremely challenging. Accordingly, a strategy is presented in which different chemical, biochemical, and morphological properties of 3D biomaterials are systematically varied to produce novel scaffolds with tuneable cell affinities. Specifically, cationized and surfactant-conjugated proteins, recently shown to have non-native membrane affinity, are covalently attached to 3D scaffolds of collagen or carboxymethyl-dextran, yielding surface-functionalized 3D architectures with predictable cell immobilization profiles. The artificial membrane-binding proteins enhance cellular adhesion of human mesenchymal stem cells (hMSCs) via electrostatic and hydrophobic binding mechanisms. Furthermore, functionalizing the 3D scaffolds with cationized or surfactant-conjugated myoglobin prevents a slowdown in proliferation of seeded hMSCs cultured for seven days under hypoxic conditions.

Development of novel tools for the in vitro investigation of drug-induced liver injury

INTRODUCTION

Due to its complex mechanisms and unpredictable occurrence, drug-induced liver injury (DILI) complicates drug identification and classification. Since species-specific differences in metabolism and pharmacokinetics exist, data obtained from animal studies may not be sufficient to predict DILI in humans.

AREAS COVERED

Over the last few decades, numerous in vitro models have been developed to replace animal testing. The advantages and disadvantages of commonly used liver-derived in vitro models (e.g., cell lines, hepatocyte models, liver slices, three-dimensional (3D) hepatospheres, etc.) are discussed. Toxicogenomics-based methodologies (genomics, epigenomics, transcriptomics, proteomics and metabolomics) and next-generation sequencing have also been used to enhance the reliability of DILI prediction. This review presents an overview of the currently used alternative toxicological models and of the most advanced approaches in the field of DILI research.

EXPERT OPINION

It seems unlikely that a single in vitro system will be able to mimic the complex interactions in the human liver. Three-dimensional multicellular systems may bridge the gap between conventional 2D models and in vivo clinical studies in humans and provide a reliable basis for hepatic toxicity assay development. Next-generation sequencing technologies, in comparison to microarray-based technologies, may overcome the current limitations and are promising for the development of predictive models in the near future.

Platinum blue staining of cells grown in electrospun scaffolds

Fibroblast cells grown in electrospun polymer scaffolds were stained with platinum blue, a heavy metal stain, and imaged using scanning electron microscopy. Good contrast on the cells was achieved compared with samples that were gold sputter coated. The cell morphology could be clearly observed, and the cells could be distinguished from the scaffold fibers. Here we optimized the required concentration of platinum blue for imaging cells grown in scaffolds and show that a higher concentration causes platinum aggregation. Overall, platinum blue is a useful stain for imaging cells because of its enhanced contrast using scanning electron microscopy (SEM). In the future it would be useful to investigate cell growth and morphology using three-dimensional imaging methods.

Biomimetic L-aspartic acid-derived functional poly(ester amide)s for vascular tissue engineering

Functionalization of polymeric biomaterials permits the conjugation of cell signaling molecules capable of directing cell function. In this study, l-phenylalanine and l-aspartic acid were used to synthesize poly(ester amide)s (PEAs) with pendant carboxylic acid groups through an interfacial polycondensation approach. Human coronary artery smooth muscle cell (HCASMC) attachment, spreading and proliferation was observed on all PEA films. Vinculin expression at the cell periphery suggested that HCASMCs formed focal adhesions on the functional PEAs, while the absence of smooth muscle α-actin (SMαA) expression implied the cells adopted a proliferative phenotype. The PEAs were also electrospun to yield nanoscale three-dimensional (3-D) scaffolds with average fiber diameters ranging from 130 to 294nm. Immunoblotting studies suggested a potential increase in SMαA and calponin expression from HCASMCs cultured on 3-D fibrous scaffolds when compared to 2-D films. X-ray photoelectron spectroscopy and immunofluorescence demonstrated the conjugation of transforming growth factor-β1 to the surface of the functional PEA through the pendant carboxylic acid groups. Taken together, this study demonstrates that PEAs containing aspartic acid are viable biomaterials for further investigation in vascular tissue engineering.