Influence of Crosslinking Concentration on the Properties of Biodegradable Modified Cassava Starch-Based Films for Packaging Applications

Chitosan/modified cassava starch/curcumin (CS/S/Cur) films with a crosslinker were developed via the solvent casting technique for the application of food packaging. The effects of citric acid (CA) as a natural crosslinker were assessed at different concentrations (0-10.0%, w/w, on a dry base on CS and S content). To measure the most favorable film, chemical structure and physical, mechanical, and thermal properties were investigated. Successful crosslinking between CS and S was seen clearly in the Fourier Transform Infrared (FTIR) spectra. The properties of the water resistance of the CS/S/Cur films crosslinked with CA were enhanced when compared to those without CA. Furthermore, it was found that the addition of CA crosslinking would improve the mechanical properties of composite films to some extent. It had been reported that the CA crosslinking level of 7.5 wt% of CS/S/Cur film demonstrated high performance in terms of physical properties. The tensile strength of the crosslinked film increased from 8 ± 1 MPa to 12 ± 1 MPa with the increasing content of CA, while water vapor permeability (WVP), swelling degree (SD), and water solubility (WS) decreased. An effective antioxidant scavenging activity of the CS/S/Cur film decreased with an increase in CA concentrations. This study provides an effective pathway for the development of active films based on polysaccharide-based film for food packaging applications.

Recent Advancements in Metallic Au- and Ag-Based Chitosan Nanocomposite Derivatives for Enhanced Anticancer Drug Delivery

The rapid advancements in nanotechnology in the field of nanomedicine have the potential to significantly enhance therapeutic strategies for cancer treatment. There is considerable promise for enhancing the efficacy of cancer therapy through the manufacture of innovative nanocomposite materials. Metallic nanoparticles have been found to enhance the release of anticancer medications that are loaded onto them, resulting in a sustained release, hence reducing the dosage required for drug administration and preventing their buildup in healthy cells. The combination of nanotechnology with biocompatible materials offers new prospects for the development of advanced therapies that exhibit enhanced selectivity, reduced adverse effects, and improved patient outcomes. Chitosan (CS), a polysaccharide possessing distinct physicochemical properties, exhibits favorable attributes for controlled drug delivery due to its biocompatibility and biodegradability. Chitosan nanocomposites exhibit heightened stability, improved biocompatibility, and prolonged release characteristics for anticancer medicines. The incorporation of gold (Au) nanoparticles into the chitosan nanocomposite results in the manifestation of photothermal characteristics, whereas the inclusion of silver (Ag) nanoparticles boosts the antibacterial capabilities of the synthesized nanocomposite. The objective of this review is to investigate the recent progress in the utilization of Ag and Au nanoparticles, or a combination thereof, within a chitosan matrix or its modified derivatives for the purpose of anticancer drug delivery. The research findings for the potential of a chitosan nanocomposite to deliver various anticancer drugs, such as doxorubicin, 5-Fluroacil, curcumin, paclitaxel, and 6-mercaptopurine, were investigated. Moreover, various modifications carried out on the chitosan matrix phase and the nanocomposite surfaces to enhance targeting selectivity, loading efficiency, and pH sensitivity were highlighted. In addition, challenges and perspectives that could motivate further research related to the applications of chitosan nanocomposites in cancer therapy were summarized.

Food applications of bioactive biomaterials based on gelatin and chitosan

Food packaging must guarantee the products' quality during the different operations including packing and maintenance throughout transportation and storage until to consumption. Thus, it should satisfy, both, food freshness and quality preservation and consumers health safety. Natural bio-sourced polymers have been explored as safe edible materials for several packaging applications, being interestingly carrier of bioactive substances, once added to improve films' properties. Gelatin and chitosan are among the most studied biomaterials for the preparation of edible packaging films due to their excellent characteristics including biodegradability, compatibility and film-forming property. These polymers could be used alone or in combination with other polymers to produce composite films with the desired physicochemical and mechanical properties. When incorporated with bioactive substances (natural extracts, polyphenolic compounds, essential oils), chitosan/gelatin-based films acquired various biological properties, including antioxidant and antimicrobial activities. The emerging bioactive composite films with excellent physical attributes represent excellent packaging alternative to preserve different types of foodstuffs (fruits, meat, fish, dairy products, …) and have shown great achievements. This chapter provides the main techniques used to prepare gelatin- and chitosan- based films, showing some examples of bioactive compounds incorporated into the films' matrix. Also, it illustrates the outstanding advantages given by these biomaterials for food preservation, when used as coating and wrapping agents.

Antibacterial photodynamic properties of silver nanoparticles-loaded curcumin composite material in chitosan-based films

In order to cope with the increasingly severe food contamination and safety problems, a powerful sterilization of food packaging material is urgently needed. Chitosan (CS) has potential applications in food packaging due to its good film-forming properties, but its antibacterial activity is not sufficient to meet the needs in practical applications. Silver nanoparticles (AgNPs) have the problem of weak immediate antibacterial activity as a broad-spectrum antibacterial agent. Therefore, in this study, AgNPs@GA@Cur-POTS (AGCP) composite antibacterial system was prepared by combining AgNPs with antibacterial photodynamic therapy using gallic acid (GA) as a reducing agent, curcumin (Cur) as a photosensitizer and perfluorosilane (POTS) for surface modification. The results showed that AGCP could produce a large number of reactive oxygen species under blue light irradiation, killing >90 % of E. coli and S. aureus within 2 h. Subsequently, the composite film of CS loaded with AGCP (CS/AGCP) was prepared by the flow-delay method. The CS/AGCP composite film exhibited excellent barrier properties and antioxidant activity, while its antibacterial rates against E. coli and S. aureus reached 98.44 ± 1.27 % and 99.11 ± 0.24 %, respectively, while the OD630 values of the two groups of bacteria treated with it showed no significant increase in incubation for up to 132 h, exhibiting remarkable and sustained antibacterial effects. Taken together, this work will provide a new strategy for antibacterial food packaging.

Facile synthesis of a CuSe/PVP nanocomposite for ultrasensitive non-enzymatic glucose biosensing

Non-enzymatic glucose biosensors show high sensitivity, lower response time, wide linear range and low cost. Copper based composites show excellent electrocatalytic tunability and lead to a better charge transfer in electrochemical non-enzymatic glucose biosensors. In this work, a nanocomposite of polyvinylpyrrolidone (PVP) and copper selenide was synthesized by a facile one pot sol gel method. Synthesized nanomaterials were characterized by XRD, FTIR, UV-visible spectroscopy, SEM, EDS and XPS techniques. Electrochemical behavior was analyzed by cyclic voltammetry (CV), electrochemical impendence (EIS) and chronoamperometry techniques. XRD analysis revealed a hexagonal structure and crystalline nature of CuSe/PVP. FTIR spectra depicted C-N bonding at 1284 cm-1 and C[double bond, length as m-dash]O stretching at 1634 cm-1, which indicated the presence of PVP in the nanocomposite. Stretching at 823 cm-1 was attributed to the presence of copper selenide. UV-visible absorption indicated the bandgap of copper selenide/PVP at 2.7 eV. SEM analysis revealed a flake like morphology of CuSe/PVP. EDS and XPS analysis confirmed the presence of copper and selenium in the prepared nanocomposite. Prior to employing for biosensing applications, it is important to evaluate the antibacterial activity of nanomaterials for long term use in biological in vitro testing. These materials have shown an efficient inhibition zone of 26 mm against Gram negative Pseudomonas at 50 μg ml-1 and MIC value of 10 μg ml-1. Cyclic voltammetry shows that CuSe/PVP is a promising biosensor for monitoring glucose levels in a wide linear range of 0.5 mM to 3 mM at an excellent sensitivity of 13 450 μA mM-1 cm-2 with an LOD of 0.223 μM. Chronoamperometry measurements revealed a selective behavior of CuSe/PVP for glucose biosensing amongst ascorbic acid and dopamine as common interfering molecules. The nanocomposite was stable after 8 repeated cycles with 92% retention for glucose sensing capacity. This is attributed to the stable nature of the CuSe/PVP nanocomposite as well as higher surface area of available active sites. Herein the CuSe/PVP nanocomposite offered reasonable selectivity, high sensitivity wide linear range with very low LOD, as well as being abundant in nature, this Cu based biosensor has promising applications for future point of care tests (POCT).

Recent Advances in Chitosan-Based Applications-A Review

Chitosan derived from chitin gas gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.

Evaluating effect of salt leaching method on release and swelling rate of metformin nanoparticles loaded-chitosan/polyvinyl alcohol porous composite

In this study, salt leaching (SL) technique was used to prepare a chitosan/polyvinyl alcohol (CS/PVA) polymeric composite in order to load metformin nanoparticles (METNPs). Sodium chloride was added to the CS/PVA (0.5:0.1) composite to create a porous hydrogel using the SL technique. METNPs were then prepared by water/oil (w/o) method and loaded into the hydrogel structure. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analysis confirmed that >80 % of the METNPs were in the range of 10 nm. As a result, encapsulation increased due to the increase in surface-to-volume ratio. Scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) results confirmed that creating porosity in the polymer composition by the SL method led to increased CS/PVA polymer chain mobility. The drug encapsulation increased due to more porosity, and the release in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) was according to the controlled diffusion kinetics. Furthermore, the drug release from CS/PVA composite was anomalous carrier type that could be attributed to the addition of salt. However, due to the increase the amount of PVA and the creation of a monotonous composite structure, encapsulation of drug decreased, which is in accordance with the polymer relaxation mechanism.

Novel selenium and/or copper substituted hydroxyapatite-gelatin-chitosan-eggshell membrane nanocomposite scaffolds for bone tissue engineering applications

Limitations with the majority of bone therapeutic treatments include low availability, ethical constraints and low biological compatibility. Although a number of choice materials have been exploited successfully, there has always been scope for improvement as well as development of the next-generation of materials. Herein, scaffolds - developed from gelatin, chitosan and eggshell membranes - were crosslinked using tannic acid, and further infused with selenium and/or copper substituted hydroxyapatite nanoparticles to generate a novel nanocomposite substrate. FESEM images of the nanocomposite scaffolds revealed the presence of interconnected pores, mostly spread over the whole surface of the scaffold, alongside XRD and FTIR profiling that detailed the formation of hydroxyapatite as a sole phase. Moreover, physical characterisation of the nanocomposite confirmed that the hydroxyapatite particulates and the eggshell membrane fibres were uniformly distributed and contributed to the surface roughness of the scaffold. Biocompatibility and cytotoxicity of the novel constructs were assessed using the mouse-derived osteoblastic cell line, MC3T3-E1, and standard cell culture assays. Metabolic activity assessment (i.e. MTS assay), LDH-release profiles and Live/Dead staining demonstrated good cell adhesion, viability, and proliferation rates. Accordingly, this work summarises the successful development of a novel construct which may be exploited as a clinical/therapeutic treatment for bone repair as well as a possible translational application as a novel biomaterial for the drug development pipeline.

PVA/Chitosan Thin Films Containing Silver Nanoparticles and Ibuprofen for the Treatment of Periodontal Disease

Local delivery of drugs or antimicrobial agents is a suitable approach in the management of periodontitis when the infection is localized deep in the pockets and does not adequately respond to mechanical debridement and/or systemic antibiotic treatment. In this context, the objective of this study was to prepare new biocomposite films with antimicrobial, anti-inflammatory, and good mechanical properties to be applied in periodontal pockets. The composite film is eco-friendly synthesized from poly(vinyl alcohol) (PVA) cross-linked with oxidized chitosan (OxCS). Silver nanoparticles (AgNps) were inserted during film synthesis by adding freshly chitosan-capped AgNps colloidal solution to the polymer mixture; the addition of AgNps up to 1.44 wt.% improves the physico-chemical properties of the film. The characterization of the films was performed by FT-IR, atomic mass spectrometry, X-ray spectroscopy, and SEM. The films displayed a high swelling ratio (162%), suitable strength (1.46 MPa), and excellent mucoadhesive properties (0.6 N). Then, ibuprofen (IBF) was incorporated within the best film formulation, and the IBF-loaded PVA/OxCS-Ag films could deliver the drug in a sustained manner up to 72 h. The biocomposite films have good antimicrobial properties against representative pathogens for oral cavities. Moreover, the films are biocompatible, as demonstrated by in vitro tests on HDFa cell lines.

Retinol-Loaded Poly(vinyl alcohol)-Based Hydrogels as Suitable Biomaterials with Antimicrobial Properties for the Proliferation of Mesenchymal Stem Cells

Polyvinyl alcohol (PVA) hydrogels are well-known biomimetic 3D systems for mammalian cell cultures to mimic native tissues. Recently, several biomolecules were intended for use in PVA hydrogels to improve their biological properties. However, retinol, an important biomolecule, has not been combined with a PVA hydrogel for culturing bone marrow mesenchymal stem (BMMS) cells. Thus, for the first time, the effect of retinol on the physicochemical, antimicrobial, and cell proliferative properties of a PVA hydrogel was investigated. The ability of protein (3.15 nm) and mineral adsorption (4.8 mg/mL) of a PVA hydrogel was improved by 0.5 wt.% retinol. The antimicrobial effect of hydrogel was more significant in S. aureus (39.3 mm) than in E. coli (14.6 mm), and the effect was improved by increasing the retinol concentration. The BMMS cell proliferation was more upregulated in retinol-loaded PVA hydrogel than in the control at 7 days. We demonstrate that the respective in vitro degradation rate of retinol-loaded PVA hydrogels (RPH) (75-78% degradation) may promote both antibacterial and cellular proliferation. Interestingly, the incorporation of retinol did not affect the cell-loading capacity of PVA hydrogel. Accordingly, the fabricated PVA retinol hydrogel proved its compatibility in a stem cell culture and could be a potential biomaterial for tissue regeneration.

Fabrication and Characterization of Poly (Vinyl Alcohol)-Chitosan-Capped Silver Nanoparticle Hybrid Membranes for Pervaporation Dehydration of Ethanol

Chitosan-capped silver nanoparticle (CS-capped AgNPs)-incorporated Poly(vinyl alcohol) (PVA) hybrid membranes were prepared by a solution-casting technique for ethanol dehydration via pervaporation. The incorporation of CS-capped AgNPs into the PVA membrane and its influence on membrane properties and pervaporation-separation process of azeotropic water/ethanol mixture was studied. The addition of CS-capped AgNPs into the PVA membrane reduced the crystallinity, thereby increasing the hydrophilicity and swelling degree of the hybrid membrane, supported by contact angle (CA) analyzer and swelling degree experiments, respectively. Fourier transform infrared spectroscopy (FTIR) demonstrated the formation of polymeric matrix between PVA and CS and also the binding of AgNPs onto the functional group of CS and PVA, which was also reflected in the microstructure images demonstrated by scanning electron microscopy (SEM) and by 2θ angle of wide-angle X-ray diffraction (WAXD). The effect of CS-capped AgNPs on the thermal stability of the hybrid membrane was demonstrated by differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). These characteristics of the hybrid membrane positively impact the efficiency of the dehydration of ethanol, as indicated by pervaporation experiments. The best performances in total flux (12.40 ± 0.20 × 10⁻² kg/m² h) and selectivity (3612.33 ± 6.03) at 30 °C were shown for CS-capped AgNPs PVA hybrid membrane containing 2 wt.% CS-capped AgNPs (M-4). This confirms that the developed hybrid membranes can be efficiently used to separate water from azeotropic aqueous ethanol.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

Chitosan Nanoparticle-Based System: A New Insight into the Promising Controlled Release System for Lung Cancer Treatment

Lung cancer has been recognized as one of the most often diagnosed and perhaps most lethal cancer diseases worldwide. Conventional chemotherapy for lung cancer-related diseases has bumped into various limitations and challenges, including non-targeted drug delivery, short drug retention period, low therapeutic efficacy, and multidrug resistance (MDR). Chitosan (CS), a natural polymer derived from deacetylation of chitin, and comprised of arbitrarily distributed β-(1-4)-linked d-glucosamine (deacetylated unit) and N-acetyl-d-glucosamine (acetylated unit) that exhibits magnificent characteristics, including being mucoadhesive, biodegradable, and biocompatible, has emerged as an essential element for the development of a nano-particulate delivery vehicle. Additionally, the flexibility of CS structure due to the free protonable amino groups in the CS backbone has made it easy for the modification and functionalization of CS to be developed into a nanoparticle system with high adaptability in lung cancer treatment. In this review, the current state of chitosan nanoparticle (CNP) systems, including the advantages, challenges, and opportunities, will be discussed, followed by drug release mechanisms and mathematical kinetic models. Subsequently, various modification routes of CNP for improved and enhanced therapeutic efficacy, as well as other restrictions of conventional drug administration for lung cancer treatment, are covered.

Development of nanobiomaterial for wound healing based on silver nanoparticles loaded on chitosan hydrogel

The objective of this study was to develop nanobiomaterial containing silver nanoparticles (AgNPs) for wound healing. AgNPs were synthesized using Saussurea lappa (Sl) aqueous root extract as reducing agent and were characterized physico-chemically using UV-vis spectral studies, XRD, FESEM, TEM, FTIR spectral analysis, DLS, and TG-DSC. Sl AgNPs production was optimized using response surface methodology. The cytotoxicity of Sl AgNPs was assessed by THP1 cell lines, which showed that Sl AgNPs were nontoxic with an IC50 of 151.10 μg/mL at 24 h. For topical application, Sl AgNPs was loaded on chitosan hydrogel was characterized through spreadability, in vitro release, antibacterial activity, swelling behavior, and SEM analysis. The chitosan Sl AgNPs hydrogel was subjected acute dermal toxicity test using Wistar albino rats and was found to be nontoxic. The excisional wound model was created along with Pseudomonas aeruginosa as an inoculant in Wistar albino rats. The chitosan Sl AgNPs hydrogel treated rats showed excellent wound healing qualities, lower bacterial counts, and enhanced production of connective tissues. Our findings strongly suggest that AgNPs synthesized from Saussurea lappa root extract loaded on chitosan hydrogel possibly applied for the remedy of infectious wounds at a concentration of 0.1 mg of Sl AgNPs/g of hydrogel.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03030-0.

Biological fabrication and electrostatic attractions of new layered silver/talc nanocomposite using Lawsonia inermis L. and its chitosan-capped inorganic/organic hybrid: Investigation on acceleration of Staphylococcus aureus and Pseudomonas aeruginosa infected wound healing

In the present study, new-layered inorganic/organic hybrid of silver/talc nanocomposites (Ag/Tlc-NPs) and its chitosan-capped derivative (Ag/Tlc/Csn NCs) were biochemically synthesized utilizing Lawsonia inermis L. extract. The silver nanoparticles (Ag NPs) were synthesized employing green method on the exterior surface layer of talc mineral as a solid substrate. The negatively charged surface layer of talc might function as templates and can attract the chitosan cations from a solution to yield a layered hybrid structure, whose inorganic phase is formed by Si-O-Ag bonds. Our results revealed that Ag NPs were formed on the exterior surface of talc with a diameter with size of 124-215 nm. In addition, cytotoxicity, in vitro antibacterial activity, and clinical effects of wound-healing ointments containing talc were investigated. The results implied the successful synthesis of Ag/Tlc/Csn NCs using the extract. The structures were safe up to 0.50 mg/mL. In vitro studies confirmed antioxidant and antibacterial properties of Ag/Tlc/Csn NCs. In sum, our findings showed that the ointments improve wound healing process by inducing an anti-inflammatory M2 phenotype and bFGF, CD206, collagen1A, and IL-10 production that causes fibroblast migration and wound closure through influencing M2 macrophage. Ag/Tlc/Csn is suggested to be taken into consideration as a medical combination for improving infected wound healing and as a promising agent for clinical administration.

Effectiveness of Green Synthesis of Silver/Kaolinite Nanocomposite Using Quercus infectoria Galls Aqueous Extract and Its Chitosan-Capped Derivative on the Healing of Infected Wound

Kaolinite nanocomposites (NCs) could be utilized as agents for wound healing owing to their efficiency and low toxicity. The present study was conducted to synthesize a novel silver/kaolinite NCs (Ag/Kaol NCs) and investigate their chitosan derivation (Ag/Kaol/Chit NCs) using oak extract. XRD, SEM, EDX, FT-IR, and DLS were employed for the investigation of structural and physio-chemical properties of the synthesized NCs. The obtained results revealed that synthesized Ag/Kaol NCs were mesoporous and spherical with sizes ranging from 7-11 nm. They also demonstrated successful synthesis between silver and kaolinite using the extract. Cytotoxicity and in vitro antibacterial activity were also investigated. The clinical effects of ointments containing the NCs for improving wound healing were studied on the wound area, total bacterial count, histological parameters, and protein expression of some genes. Nanocomposites were safe up to 0.50 mg/mL. The results of in vivo and in vitro antibacterial activity showed that Ag/Kaol NCs, were of antibacterial activity ( ). The results of antioxidant activity indicated that Ag/Kaol NCs have antioxidant structures. Our findings concerning molecular mechanism implied that Ag/Kaol/Chit increased the expression of Wnt/ β -catenin and collagen ( ). In sum, Ag/Kaol/Chit showed antibacterial activity and improved wound healing by decreasing the inflammation and promoting the proliferative phase. The novel NCs showed wound healing properties by decreasing inflammation and total bacterial count and increasing proliferative phase. The application of Ag/Kaol/Chit was suggested as a green agent for improving infected wound healing.

Novel fabrication of dual nanoparticle loaded-co-polymeric dressing for effective healing efficiency in wound care after fracture surgery

In the present study, curcumin loaded chitosan/poly ethylene glycol nanomaterial (CUR loaded CH/PEG/AgNPs) was fabricated and characterized for wound healing efficiency after fracture surgery. The interaction of functional groups and crystal nature were recorded under FTIR and XRD spectrometer and reveals that the stabilization and purity of NPs was mediated by OH/NH₂ groups in chitosan. FESEM showed the presence of spherical and well dispersed particles. The average size of the particle was 13.48 nm. The CUR loaded CH/PEG/AgNPs showed higher swelling capacity (495.6 g/g) in phosphate buffer saline compared to water (140.2 g/g). The drug loading efficiency was higher in CUR loaded CH/PEG/AgNPs compared to CH/PEG films as recorded by the absorbance peak at 460 nm corresponds to curcumin in the composite. A dose dependent cytotoxicity of CUR loaded CH/PEG/AgNPs was noticed on Vero cells. The viability of Vero cells was increased to 96.5% at 100 μg/mL. A remarkable change in Vero cells such as condensed nuclei and membrane blabbing was noticed in cells treated with CUR loaded CH/PEG/AgNPs. A greater inhibition of Staphylococcus aureus and Escherichia coli was noticed at 24 h and 48 h treated with CUR loaded CH/PEG/AgNPs. A greater healing effect by increasing the wound contraction (98% on day 12) was observed with CUR loaded CH/PEG/AgNPs compared to control. Histopathological examination demonstrated that CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised rats. The results of this study conclude that CUR loaded CH/PEG/AgNPs could be promising candidate to prevent microbial infections in wound, healing wound rapidly and inhibit the proliferation of apoptotic cells. Thus, CUR loaded CH/PEG/AgNPs could be a potential therapeutic agent with broad spectrum applications in the future. HighlightsA new approach was used to develop curcumin-loaded chitosan/poly(ethylene glycol)/AgNPs.The CUR-loaded CH/PEG/AgNPs were confirmed to be crystals by XRD analysis.The prepared CH/PEG/AgNPs were spherical and averaged 13.48 nm in size.The growth of S. aureus and E. coli were inhibited mostly by CH/PEG/AgNPs treatment.CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised mice.

Compendium of Conventional and Targeted Drug Delivery Formulation Used for the Treatment and Management of the Wound Healing

Wound healing is a complex and dynamic phenomenon that involves the restoration of normal physiology and functioning of injured tissue. The process of wound healing is primarily regulated by various cytokines, inflammatory mediators, and growth factors at the molecular level. Any intervention in the normal wound healing process leads to further tissue damage, which in turn leads to delayed wound healing. Several natural, synthetic drugs and their combinations were used to restored and accelerate the wound healing process. However, the conventional delivery carriers were not much effective, and thus, nowadays, nanocarriers are gaining much popularity since they are playing a pivotal role in drug delivery. Since nanocarriers have their own applicability and benefits (enhance the bioavailability, site-specific targeting) so, they can accelerate wound healing more efficiently. This review briefly discussed about the various events that take place during the wound healing process with emphasis on various natural, synthetic, and combination drug therapy used for accelerating wound healing and the role of nanotechnology-based approaches in chronic wound healing.

Polymeric membranes for biomedical applications

The rapid development of nanotechnology paved the way for further expansion of polymer chemistry and the fabrication of advanced polymeric membranes. Such modifications allowed enhancing or adding some unique properties, including mechanical strength, excellent biocompatibility, easily controlled degradability, and biological activity. This chapter discusses various applications of polymeric membranes in three significant areas of biomedicine, including tissue engineering, drug delivery systems, and diagnostics. It is intended to highlight here possible ways of improvement the properties of polymeric membranes, by modifying with other polymers, functional groups, compounds, drugs, bioactive components, and nanomaterials.

Synergistic effect of curcumin and chitosan nanoparticles on nano-hydroxyapatite-induced reproductive toxicity in rats

Although the toxicity/biocompatibility of hydroxyapatite nanoparticles (HAPNPs), a prospective nano-biomaterial, is extensively studied, its interaction on the reproductive system following exposure is less exploited. In the present study, male rats were exposed to HAPNPs (300 mg/kg BW) to determine its possible reproductive toxicity. Also, the protective effects of chitosan (CSNPs, 280 mg/kg BW) and/or curcumin (CurNPs, 15 mg/kg BW) nanoparticles against HAPNPs-induced reproductive toxicity were studied. Animals were orally gavage daily with respective doses for 45 consecutive days. The obtained results indicated that HAPNPs caused a significant decrease in sperm count, sperm motility, testosterone hormone, steroidogenic enzymes (17-ketosteroid reductase and 17β-hydroxysteroid dehydrogenase), and antioxidant enzymes (glutathione peroxidase, glutathione S-transferase, catalase, and superoxide dismutase) in addition to total antioxidant capacity and reduced glutathione. LH and FSH, abnormal sperm, oxidative stress parameters (thiobarbituric acid-reactive substances (TBARS), nitric oxide (NO), and 8-hydroxy-deoxyguanosine (8-OHdG)), p53, TNFα, and interleukin-6 were significantly increased. The DNA damage was also analyzed by assaying 8-OHdG level which is considered as an indicator of genotoxicity and also suppression of the gene expression of mtTFA, induction of UCP2. Similarly, the histopathological evaluation was also changed following exposure to HAPNPs. The antioxidant activity of CSNPs and CurNPs showed mitigating effect against reproductive deterioration induced by HAPNPs throughout improvements in semen characteristics, sex hormones, inflammatory factors, and antioxidant status. The present study concluded that HAPNPs induced reproductive toxicity and it is important to use nano-antioxidants CSNPs and CurNPs as protective agents.

Electrospun antibacterial poly(vinyl alcohol)/Ag nanoparticles membrane grafted with 3,3',4,4'-benzophenone tetracarboxylic acid for efficient air filtration

In this study, poly(vinyl alcohol) (PVA) membranes containing Ag nanoparticles (AgNPs) were prepared by electrospinning and grafted copolymerization with 3,3',4,4'-benzophenone tetracarboxylic acid (BPTA) to provide better mechanical properties, lower water vapor transmittance, and higher antibacterial activity (against Staphylococcus aureus and Escherichia coli) than the PVA/AgNPs membrane. The PVA/AgNPs/BPTA membrane showed higher antibacterial activity than the other membranes, and it produced inhibition zones with diameters of 18.12 ± 0.08 and 16.41 ± 0.05 mm against S. aureus and E. coli, respectively. The PVA/AgNPs/BPTA membrane was found to be capable of promoting reactive oxygen species (ROS) formation under both light and dark conditions. Cycling experiments performed following ROS quenching showed that the best-performing composite membrane retained >70% of its original OH⋅ radical and H₂O₂ charging capacity after seven cycles. In the filtration test, the electrospun nanofibrous membranes showed high filtration efficiencies of 99.98% for sodium chloride (NaCl). In addition, these membranes maintained a relatively low pressure drop of 168 Pa with a basis weight of 2.1 g m^-2. Thus, the PVA/AgNPs/BPTA membrane was concluded to be a promising medical protective material offering the benefits of structural stability and reusability.

Polymer-Based Materials Loaded with Curcumin for Wound Healing Applications

Some of the currently used wound dressings have interesting features such as excellent porosity, good water-absorbing capacity, moderate water vapor transmission rate, high drug loading efficiency, and good capability to provide a moist environment, but they are limited in terms of antimicrobial properties. Their inability to protect the wound from microbial invasion results in wound exposure to microbial infections, resulting in a delayed wound healing process. Furthermore, some wound dressings are loaded with synthetic antibiotics that can cause adverse side effects on the patients. Natural-based compounds exhibit unique features such as good biocompatibility, reduced toxicity, etc. Curcumin, one such natural-based compound, has demonstrated several biological activities such as anticancer, antibacterial and antioxidant properties. Its good antibacterial and antioxidant activity make it beneficial for the treatment of wounds. Several researchers have developed different types of polymer-based wound dressings which were loaded with curcumin. These wound dressings displayed excellent features such as good biocompatibility, induction of skin regeneration, accelerated wound healing processes and excellent antioxidant and antibacterial activity. This review will be focused on the in vitro and in vivo therapeutic outcomes of wound dressings loaded with curcumin.

Silver Nanomaterials for Wound Dressing Applications

Silver nanoparticles (AgNPs) have recently become very attractive for the scientific community due to their broad spectrum of applications in the biomedical field. The main advantages of AgNPs include a simple method of synthesis, a simple way to change their morphology and high surface area to volume ratio. Much research has been carried out over the years to evaluate their possible effectivity against microbial organisms. The most important factors which influence the effectivity of AgNPs against microorganisms are the method of their preparation and the type of application. When incorporated into fabric wound dressings and other textiles, AgNPs have shown significant antibacterial activity against both Gram-positive and Gram-negative bacteria and inhibited biofilm formation. In this review, the different routes of synthesizing AgNPs with controlled size and geometry including chemical, green, irradiation and thermal synthesis, as well as the different types of application of AgNPs for wound dressings such as membrane immobilization, topical application, preparation of nanofibers and hydrogels, and the mechanism behind their antimicrobial activity, have been discussed elaborately.

A novel approach to production of Chlorella protothecoides oil-loaded nanoparticles via electrospraying method: Modeling of critical parameters for particle sizing

Bioactive compounds in algae have chain rings that protect the tissue from chemical damage and disease symptoms. In addition, algal bioactive agents have the ability to stimulate the immune system, protective and therapeutic effects against many diseases, including various types of cancers, coronary heart disease, premature aging, and arthritis. These bioactive compounds also have antioxidant, anticoagulant, antiviral, and anti-inflammatory properties. It is very important to encapsulate these algal compounds for preserving bioactive properties. Two of the most efficient methods used for encapsulation are electrospraying and microemulsion techniques. Although electrospraying is a novel technique to produce nanoparticles in recent years, microemulsion is more conventional method compared with electrospraying. In this study, Chlorella protothecoides oil was encapsulated by using sodium alginate and chitosan biopolymers, and the effects of production parameters of electrospraying and microemulsion methods on the particle size and loading efficiency were investigated. Statistical modeling of critical parameters for particle sizing in microemulsion method and electrospraying technique, which is a novel approach to obtain microalgal oil-loaded nanoparticles, was also presented. It was seen that electrospraying is suitable for obtaining smaller nanoparticles (123.9-610 nm), homogeneous distribution, and higher oil loading efficiency (60%-77%) compared with microemulsion method (756.9-1128.2 nm and 57%-73%).

Silver Nanoparticles on Chitosan/Silica Nanofibers: Characterization and Antibacterial Activity

A simple, low-cost, and reproducible method for creating materials with even silver nanoparticles (AgNP) dispersion was established. Chitosan nanofibers with silica phase (CS/silica) were synthesized by an electrospinning technique to obtain highly porous 3D nanofiber scaffolds. Silver nanoparticles in the form of a well-dispersed metallic phase were synthesized in an external preparation step and embedded in the CS/silica nanofibers by deposition for obtaining chitosan nanofibers with silica phase decorated by silver nanoparticles (Ag/CS/silica). The antibacterial activity of investigated materials was tested using Gram-positive and Gram-negative bacteria. The results were compared with the properties of the nanocomposite without silver nanoparticles and a colloidal solution of AgNP. The minimum inhibitory concentration (MIC) of obtained AgNP against Staphylococcus aureus (S. aureus) ATCC25923 and Escherichia coli (E. coli) ATCC25922 was determined. The physicochemical characterization of Ag/CS/silica nanofibers using various analytical techniques, as well as the applicability of these techniques in the characterization of this type of nanocomposite, is presented. The resulting Ag/CS/silica nanocomposites (Ag/CS/silica nanofibers) were characterized by small angle X-ray scattering (SAXS), X-ray diffraction (XRD), and atomic force microscopy (AFM). The morphology of the AgNP in solution, both initial and extracted from composite, the properties of composites, the size, and crystallinity of the nanoparticles, and the characteristics of the chitosan fibers were determined by electron microscopy (SEM and TEM).

Curcumin-loaded electrospun polycaprolactone/montmorillonite nanocomposite: wound dressing application with anti-bacterial and low cell toxicity properties

Materials and scaffolds with antimicrobial properties are of great importance in wound dressing and other tissue engineering applications. The objective of the present work was to fabricate scaffolds made from nanocomposites of polycaprolactone (PCL) and quaternary ammonium salt-modified montmorillonite (MMT) by the electrospinning technique, and then characterize their antimicrobial and other properties for wound dressing applications. The effect of MMT on the structure, morphology, and thermal behavior of the electrospun wound dressings was assessed by means of X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM); the swelling capacity, antibacterial activity, and cytotoxicity were also evaluated. The results of XRD and SEM analyses showed MMT was successfully incorporated into the PCL polymeric matrix and its inclusion reduced the size and thickness of the electrospun fibers compared to pure PCL fibers. The TGA results illustrated an increase in the thermal stability of nanocomposites upon incorporation of nanoclay into the PCL matrix. The swelling capacity of the wound dressings was reduced by increasing the amount of MMT in the PCL matrix due to the increased hydrophobicity of the original MMT resulting from its modification with quaternary ammonium salt. The in vitro curcumin (Cur) release profile revealed an initial burst release followed by a sustained release, with the burst release level reduced by the introduction of MMT into the polymeric matrix. Increasing the nanoclay content further reduced the curcumin release, with the PCL/20% MMT/Cur dressings having the lowest curcumin release of all those tested. The beneficial effect of MMT on the antibacterial behavior of electrospun wound dressings based on PCL/MMT nanocomposites was confirmed, with the introduction of both MMT and curcumin into the PCL matrix resulting in lower bacterial viability. PCL/10% MMT/Cur demonstrated higher antimicrobial activity and the greatest bacterial colony reduction compared to both pure PCL and PCL/10% MMT. The cytotoxicity evaluation indicated low toxicity and confirmed the potential of PCL/MMT nanocomposite scaffolds for wound dressing applications.

Fabrication of Chitosan/PVA/GO/CuO patch for potential wound healing application

Wound healing is a common issue in our day to day life. Our immune system repairs the damaged tissue by itself and its a time-consuming process. The GO/CuO nanocomposite (NC) was synthesized through the sol-gel method. XRD, FT-IR, Raman, and TEM analysis were used to analysis the physico-chemical properties of the sample. The GO/CuO patches were prepared using chitosan (Cs)/poly vinyl alcohol (PVA) due to its biocompatibility and biodegradable nature. The obtained patches showed better antimicrobial and wound healing property than recently reported materials. The GO/CuO NC plays a major part in angiogenesis process and in the synthesis, stabilization of extracellular matrix skin proteins. Thus, GO/CuO NC enhance the wound healing mechanism by increasing cell proliferation, antimicrobial property and rapid initiation of inflammatory. Moreover, the antimicrobial activity of CuO, GO, GO/CuO and GO/CuO patch were tested against bacteria causing wound infections. Cs/PVA patch and Cs/PVA/GO/CuO patch were analyzed for swelling, evaporation and degradation behavior. Increase in cell viability and migration of NIH3t3 cells by NC patch shows a potential way for wound healing applications.