Trabecular Plate Loss and Deteriorating Elastic Modulus of Femoral Trabecular Bone in Intertrochanteric Hip Fractures

Quantitative Analysis of Primary Compressive Trabeculae Distribution in the Proximal Femur of the Elderly

OBJECTIVE

As osteoporosis progresses, the primary compressive trabeculae (PCT) in the proximal femur remains preserved and is deemed the principal load-bearing structure that links the femoral head with the femoral neck. This study aims to elucidate the distribution patterns of PCT within the proximal femur in the elderly population, and to assess its implications for the development and optimization of internal fixation devices used in hip fracture surgeries.

METHODS

This is a retrospective cohort study conducted from March 2022 to April 2023. A total of 125 patients who underwent bilateral hip joint CT scans in our hospital were enrolled. CT data of the unaffected side of the hip were analyzed. Key parameters regarding the PCT distribution in the proximal femur were measured, including the femoral head's radius (R), the neck-shaft angle (NSA), the angle between the PCT-axis and the head-neck axis (α), the distance from the femoral head center to the PCT-axis (δ), and the lengths of the PCT's bottom and top boundaries (L-bottom and L-top respectively). The impact of gender differences on PCT distribution patterns was also investigated. Student's t-test or Mann-Whitney U test were used to compare continuous variables between genders. The relationship between various variables was investigated through Pearson's correlation analysis.

RESULTS

PCT was the most prominent bone structure within the femoral head. The average NSA, α, and δ were 126.85 ± 5.85°, 37.33 ± 4.23°, and 0.39 ± 1.22 mm, respectively, showing no significant gender differences (p > 0.05). Pearson's correlation analysis revealed strong correlations between α and NSA (r = -0.689, p < 0.001), and R and L-top (r = 0.623, p < 0.001), with mild correlations observed between δ and NSA (r = -0.487, p < 0.001), and R and L-bottom (r = 0.427, p < 0.001). Importantly, our study establishes a method to accurately localize PCT distribution in true anteroposterior (AP) radiographs of the hip joint, facilitating precise screw placement in proximal femur fixation procedures.

CONCLUSION

Our study provided unprecedented insights into the distribution patterns of PCT in the proximal femur of the elderly population. The distribution of PCT in the proximal femur is predominantly influenced by anatomical and geometric factors, such as NSA and femoral head size, rather than demographic factors like gender. These insights have crucial implications for the design of internal fixation devices and surgical planning, offering objective guidance for the placement of screws in hip fracture treatments.

Cellular Scale Curvature in Bioceramic Scaffolds Enhanced Bone Regeneration by Regulating Skeletal Stem Cells and Vascularization

Critical-sized segmental bone defects cannot heal spontaneously, leading to disability and significant increase in mortality. However, current treatments utilizing bone grafts face a variety of challenges from donor availability to poor osseointegration. Drugs such as growth factors increase cancer risk and are very costly. Here, a porous bioceramic scaffold that promotes bone regeneration via solely mechanobiological design is reported. Two types of scaffolds with high versus low pore curvatures are created using high-precision 3D printing technology to fabricate pore curvatures radius in the 100s of micrometers. While both are able to support bone formation, the high-curvature pores induce higher ectopic bone formation and increased vessel invasion. Scaffolds with high-curvature pores also promote faster regeneration of critical-sized segmental bone defects by activating mechanosensitive pathways. High-curvature pore recruits skeletal stem cells and type H vessels from both the periosteum and the marrow during the early phase of repair. High-curvature pores have increased survival of transplanted GFP-labeled skeletal stem cells (SSCs) and recruit more host SSCs. Taken together, the bioceramic scaffolds with defined micrometer-scale pore curvatures demonstrate a mechanobiological approach for orthopedic scaffold design.

Twelve-month resistance and impact exercise program or risedronate provides a relative benefit to hip bone structure in postmenopausal women: results from a randomized controlled trial

Bone strength estimates are important for fracture prevention. This study compared bone strength changes in postmenopausal women with low bone mass who were assigned to 12 months of exercise, a bone medication, or control. Exercise and bone medications benefited structure at the hip. Structure should be considered in fracture prevention research.

PURPOSE

Exercise and bisphosphonates reduce fracture risk, but their impact on estimates of bone strength remains uncertain. This study compared changes in tibial bone strength using peripheral quantitative computed tomography (pQCT) and hip structure analysis (HSA) outcomes from dual-energy X-ray absorptiometry (DXA) scans in postmenopausal women with low bone mass assigned to 12 months of exercise, risedronate, or control.

METHODS

In this RCT, 276 postmenopausal women within 6 years of menopause were randomly assigned to three groups: exercise (92), risedronate (91), or control (93). Exercise included weighted jogging and progressive resistance exercises; risedronate treatment was 150 mg monthly; all groups received calcium and vitamin D. pQCT and DXA images were obtained at baseline and 6 and 12 months and compared between groups over time.

RESULTS

Participants had a mean (± SD) age of 54.5 (± 3.2) years with an average of 36.7 (± 40.7) months postmenopause. No significant differences were found between groups for the change in pQCT outcomes (volumetric bone mineral density, area, and strength estimates). At 12 months, mean percent differences (95% CI) in HSA measures between exercise and controls were as follows: intertrochanteric, cross-sectional area 2.25% (0.28, 4.12) (p = .03), cross-sectional moment of inertia (CSMI) 5.67% (1.47, 9.87) (p < .01), and section modulus (SM) 4.38% (1.02, 7.74) (p = .01), and narrow neck, average cortical thickness 2.37% (-0.08, 4.83) (p = .031). Mean percent differences (95% CI) in HSA measures between risedronate and control were as follows: intertrochanteric, CSMI 4.28% (-0.24, 8.81) (p = .03) and SM 3.35% (-0.21, 6.91) (p = .03), and shaft, subperiosteal width 0.82% (0.05, 1.58) (p = .047), CSMI 2.53% (0.88, 4.18) (p = .004), and SM 1.57% (0.34, 2.8) (p = .008). Exercise maintained neck-shaft angle compared to both control 1.27% (0.13, 2.41) (p = .04) and risedronate 1.31% (0.23, 2.39) (p = .03). All other differences for changes in HSA outcomes over time were not significantly different between the exercise and risedronate groups.

CONCLUSION

Exercise and bisphosphonates may influence structural and strength estimates at the hip, but not at peripheral sites (tibia). Neither exercise nor bisphosphonates were found to be superior in improving estimates of hip bone strength.

High-resolution local trabecular strain within trabecular structure under cyclic loading

Trabecular bone structure is a complex microstructure consisting of rods and plates, which poses challenges for its mechanical characterization. Digital image correlation (DIC) offers the possibility to characterize the strain response on the surface of trabecular bone. This study employed DIC equipped with a telecentric lens to investigate the strain state of individual trabeculae within their trabecular structure by assessing the longitudinal strain of the trabeculae at both the middle and near the edges of the trabeculae. Due to the high-resolution of the used DIC system, local surface strain of trabeculae was analyzed too. Lastly, the correlation between longitudinal trabecular strain and the orientation and slenderness of the trabeculae was investigated. The results showed that the strain magnification close to the edge of the trabeculae was higher and reached up to 8-folds the strain along the middle of the trabeculae. On the contrary, no strain magnification was found for most of the trabeculae between the longitudinal trabecular strain along the middle of the trabeculae and the globally applied strain. High-resolution full-field strain maps were obtained on the surface of trabeculae showing heterogeneous strain distribution with increasing load. No significant correlation was found between longitudinal trabecular strain and its orientation or slenderness. These findings and the applied methodology can be used to broaden our understanding of the deformation mechanisms of trabeculae within the trabecular network.

Biomechanics and mechanobiology of the bone matrix

The bone matrix plays an indispensable role in the human body, and its unique biomechanical and mechanobiological properties have received much attention. The bone matrix has unique mechanical anisotropy and exhibits both strong toughness and high strength. These mechanical properties are closely associated with human life activities and correspond to the function of bone in the human body. None of the mechanical properties exhibited by the bone matrix is independent of its composition and structure. Studies on the biomechanics of the bone matrix can provide a reference for the preparation of more applicable bone substitute implants, bone biomimetic materials and scaffolds for bone tissue repair in humans, as well as for biomimetic applications in other fields. In providing mechanical support to the human body, bone is constantly exposed to mechanical stimuli. Through the study of the mechanobiology of the bone matrix, the response mechanism of the bone matrix to its surrounding mechanical environment can be elucidated and used for the health maintenance of bone tissue and defect regeneration. This paper summarizes the biomechanical properties of the bone matrix and their biological significance, discusses the compositional and structural basis by which the bone matrix is capable of exhibiting these mechanical properties, and studies the effects of mechanical stimuli, especially fluid shear stress, on the components of the bone matrix, cells and their interactions. The problems that occur with regard to the biomechanics and mechanobiology of the bone matrix and the corresponding challenges that may need to be faced in the future are also described.

The plate-to-rod transition in trabecular bone loss is elusive

Changes in trabecular micro-architecture are key to our understanding of osteoporosis. Previous work focusing on structure model index (SMI) measurements have concluded that disease progression entails a shift from plates to rods in trabecular bone, but SMI is heavily biased by bone volume fraction. As an alternative to SMI, we proposed the ellipsoid factor (EF) as a continuous measure of local trabecular shape between plate-like and rod-like extremes. We investigated the relationship between EF distributions, SMI and bone volume fraction of the trabecular geometry in a murine model of disuse osteoporosis as well as from human vertebrae of differing bone volume fraction. We observed a moderate shift in EF median (at later disease stages in mouse tibia) and EF mode (in the vertebral samples with low bone volume fraction) towards a more rod-like geometry, but not in EF maximum and minimum. These results support the notion that the plate to rod transition does not coincide with the onset of bone loss and is considerably more moderate, when it does occur, than SMI suggests. A variety of local shapes not straightforward to categorize as rod or plate exist in all our trabecular bone samples.

3D patient-specific finite element models of the proximal femur based on DXA towards the classification of fracture and non-fracture cases

Osteoporotic bone fractures reduce quality of life and drastically increase mortality. Minimally irradiating imaging techniques such as dual-energy X-ray absorptiometry (DXA) allow assessment of bone loss through the use of bone mineral density (BMD) as descriptor. Yet, the accuracy of fracture risk predictions remains limited. Recently, DXA-based 3D modelling algorithms were proposed to analyse the geometry and BMD spatial distribution of the proximal femur. This study hypothesizes that such approaches can benefit from finite element (FE)-based biomechanical analyses to improve fracture risk prediction. One hundred and eleven subjects were included in this study and stratified in two groups: (a) 62 fracture cases, and (b) 49 non-fracture controls. Side fall was simulated using a static peak load that depended on patient mass and height. Local mechanical fields were calculated based on relationships between tissue stiffness and BMD. The area under the curve (AUC) of the receiver operating characteristic method evaluated the ability of calculated biomechanical descriptors to discriminate fracture and control cases. The results showed that the major principal stress was better discriminator (AUC > 0.80) than the volumetric BMD (AUC ≤ 0.70). High discrimination capacity was achieved when the analysis was performed by bone type, zone of fracture and gender/sex (AUC of 0.91 for women, trabecular bone and trochanter area), and outcomes suggested that the trabecular bone is critical for fracture discrimination. In conclusion, 3D FE models derived from DXA scans might significantly improve the prediction of hip fracture risk; providing a new insight for clinicians to use FE simulations in clinical practice for osteoporosis management.

Clinical Utility of Biochemical Marker of Bone Turnover: Fracture Risk Prediction and Bone Healing

Bone turnover markers (BTMs) are released during bone remodeling and are thought to reflect the metabolic activity of bone at the cellular level. This review examines BTM as a biological response marker for monitoring future fracture prediction and fracture healing processes. Substantial evidence has been of high value to investigate the use of BTM in fracture risk prediction; nevertheless, the conclusions of some studies are inconsistent due to their large variability. BTM is promising for fracture risk prediction for adopting international reference standards or providing absolute risks, such as 10-year fracture probabilities. There are uncertainties over their clinical use for monitoring osteoporotic fracture healing. More rigorous evidence is needed that can provide more detailed insights for fracture healing and for ascertaining the progression of fracture healing.

Subchondral Trabecular Rod Loss and Plate Thickening in the Development of Osteoarthritis

Developing effective treatment for osteoarthritis (OA), a prevalent and disabling disease, has remained a challenge, primarily because of limited understanding of its pathogenesis and late diagnosis. In the subchondral bone, rapid bone loss after traumatic injuries and bone sclerosis at the advanced stage of OA are well-recognized hallmarks of the disease. Recent studies have further demonstrated the crucial contribution of subchondral bone in the development of OA. However, the microstructural basis of these bone changes has not been examined thoroughly, and the paradox of how abnormal resorption can eventually lead to bone sclerosis remains unanswered. By applying a novel microstructural analysis technique, individual trabecula segmentation (ITS), to micro-computed tomography (μCT) images of human OA knees, we have identified a drastic loss of rod-like trabeculae and thickening of plate-like trabeculae that persisted in all regions of the tibial plateau, underneath both severely damaged and still intact cartilage. The simultaneous reduction in trabecular rods and thickening of trabecular plates provide important insights to the dynamic and paradoxical subchondral bone changes observed in OA. Furthermore, using an established guinea pig model of spontaneous OA, we discovered similar trabecular rod loss and plate thickening that preceded cartilage degradation. Thus, our study suggests that rod-and-plate microstructural changes in the subchondral trabecular bone may play an important role in the development of OA and that advanced microstructural analysis techniques such as ITS are necessary in detecting these early but subtle changes. With emerging high-resolution skeletal imaging modalities such as the high-resolution peripheral quantitative computed tomography (HR-pQCT), trabecular rod loss identified by ITS could potentially be used as a marker in assessing the progression of OA in future longitudinal studies or clinical diagnosis. © 2017 American Society for Bone and Mineral Research.

Femoral head trabecular micro-architecture in patients with osteoporotic hip fractures: Impact of bisphosphonate treatment

INTRODUCTION

Bisphosphonates are effective in preventing osteoporotic fractures. However, their limited efficacy of bisphosphonates has been suggested as a result of these drugs, which prevent the resorption of bone without improving bone connectivity. The trabecular microarchitecture in patients with osteoporotic hip fractures was evaluated according to their history of bisphosphonate treatment (BT).

METHODS

One hundred thirty-three patients with hip fractures admitted and treated between November 2014 and September 2016. The patients were divided into two groups based on whether they had received treatment with bisphosphonates for >3years or not [non-bisphosphonate-treated patients (NT)]. One-to-one propensity score matching generated 15 matched pairs of patients. Microstructural parameters of femoral head were measured by using micro-computed tomography (μCT). Mechanical compression test (Young's modulus, yield strength, and maximum compressive force) was performed following μCT.

RESULTS

Trabecular bone pattern factor (1.15±0.7mm^-1 versus 1.61±0.5mm^-1, p=0.037) and specific bone surface (14.1±0.8mm^-1 versus 15.4±1.9mm^-1, p=0.050) were significantly lower in the BT group than in the NT group. Furthermore, Young's modulus was significantly higher in the BT group than in the NT group (72.14±30.75MPa versus 47.89±29.89MPa, p=0.037). In both groups, trabecular bone pattern was the most closely correlated microstructural parameter to bone strength. Microstructural analysis demonstrated that bone connectivity was better preserved in the BT group than in the NT group.

CONCLUSIONS

Bisphosphonate treatment preserves bone mass and bone quality. The factors influencing osteoporotic hip fractures in patients treated with bisphosphonates warrant further research.

Deterioration of trabecular plate-rod and cortical microarchitecture and reduced bone stiffness at distal radius and tibia in postmenopausal women with vertebral fractures

Postmenopausal women with vertebral fractures have abnormal bone microarchitecture at the distal radius and tibia by HR-pQCT, independent of areal BMD. However, whether trabecular plate and rod microarchitecture is altered in women with vertebral fractures is unknown. This study aims to characterize the abnormalities of trabecular plate and rod microarchitecture, cortex, and bone stiffness in postmenopausal women with vertebral fractures. HR-pQCT images of distal radius and tibia were acquired from 45 women with vertebral fractures and 45 control subjects without fractures. Trabecular and cortical compartments were separated by an automatic segmentation algorithm and subjected to individual trabecula segmentation (ITS) analysis for measuring trabecular plate and rod morphology and cortical bone evaluation for measuring cortical thickness and porosity, respectively. Whole bone and trabecular bone stiffness were estimated by finite element analysis. Fracture and control subjects did not differ according to age, race, body mass index, osteoporosis risk factors, or medication use. Women with vertebral fractures had thinner cortices, and larger trabecular area compared to the control group. By ITS analysis, fracture subjects had fewer trabecular plates, less axially aligned trabeculae and less trabecular connectivity at both the radius and the tibia. Fewer trabecular rods were observed at the radius. Whole bone stiffness and trabecular bone stiffness were 18% and 22% lower in women with vertebral fractures at the radius, and 19% and 16% lower at the tibia, compared with controls. The estimated failure load of the radius and tibia were also reduced in the fracture subjects by 13% and 14%, respectively. In summary, postmenopausal women with vertebral fractures had both trabecular and cortical microstructural deterioration at the peripheral skeleton, with a preferential loss of trabecular plates and cortical thinning. These microstructural deficits translated into lower whole bone and trabecular bone stiffness at the radius and tibia. Our results suggest that abnormalities in trabecular plate and rod microstructure may be important mechanisms of vertebral fracture in postmenopausal women.

Cortical Bone Morphological and Trabecular Bone Microarchitectural Changes in the Mandible and Femoral Neck of Ovariectomized Rats

Objective

This study used microcomputed tomography (micro-CT) to evaluate the effects of ovariectomy on the trabecular bone microarchitecture and cortical bone morphology in the femoral neck and mandible of female rats.

Materials and Methods

Twelve female Wister rats were divided into two groups: the control and ovariectomized groups. The rats in the ovariectomized group received ovariectomy at 8 weeks of age; all the rats were sacrificed at 20 weeks of age, and their mandibles and femurs were removed and scanned using micro-CT. Four microstructural trabecular bone parameters were measured for the region below the first mandibular molar and the femoral neck region: bone volume fraction (BV/TV), trabecular thickness (TbTh), trabecular separation (TbSp), and trabecular number (TbN). In addition, four cortical bone parameters were measured for the femoral neck region: total cross-sectional area (TtAr), cortical area (CtAr), cortical bone area fraction (CtAr/TtAr), and cortical thickness (CtTh). The CtTh at the masseteric ridge was used to assess the cortical bone morphology in the mandible. The trabecular bone microarchitecture and cortical bone morphology in the femoral necks and mandibles of the control group were compared with those of the ovariectomized group. Furthermore, Spearman’s correlation (r_s) was conducted to analyze the correlation between the osteoporosis conditions of the mandible and femoral neck.

Results

Regarding the trabecular bone microarchitectural parameters, the BV/TV of the trabecular bone microarchitecture in the femoral necks of the control group (61.199±11.288%, median ± interquartile range) was significantly greater than that of the ovariectomized group (40.329±5.153%). Similarly, the BV/TV of the trabecular bone microarchitecture in the mandibles of the control group (51.704±6.253%) was significantly greater than that of the ovariectomized group (38.486±9.111%). Furthermore, the TbSp of the femoral necks in the ovariectomized group (0.185±0.066 mm) was significantly greater than that in the control group (0.130±0.026mm). Similarly, the TbSp of the mandibles in the ovariectomized group (0.322±0.047mm) was significantly greater than that in the control group (0.285±0.041mm). However, the TbTh and TbN trends for the mandibles and femoral necks were inconsistent between the control and ovariectomized groups. Regarding the cortical bone morphology parameters, the TtAr of the femoral necks in the ovariectomized group was significantly smaller than that in the control group. There was no significant difference in the TtAr, CtAr, or CtTh of the femoral necks between the control and ovariectomized groups, and no significant difference in the CtTh of the mandibles between the control and ovariectomized groups. Moreover, the BV/TV and TbSp of the mandibles were highly correlated with those of the femurs (r_s = 0.874 and r_s = 0.755 for BV/TV and TbSp, respectively). Nevertheless, the TbTh, TbN, and CtTh of the mandibles were not correlated with those of the femoral necks.

Conclusion

After the rats were ovariectomized, osteoporosis of the trabecular bone microarchitecture occurred in their femurs and mandibles; however, ovariectomy did not influence the cortical bone morphology. In addition, the parametric values of the trabecular bone microarchitecture in the femoral necks were highly correlated with those of the trabecular bone microarchitecture in the mandibles.

The Influence of High-Impact Exercise on Cortical and Trabecular Bone Mineral Content and 3D Distribution Across the Proximal Femur in Older Men: A Randomized Controlled Unilateral Intervention

Regular exercisers have lower fracture risk, despite modest effects of exercise on bone mineral content (BMC). Exercise may produce localized cortical and trabecular bone changes that affect bone strength independently of BMC. We previously demonstrated that brief, daily unilateral hopping exercises increased femoral neck BMC in the exercise leg versus the control leg of older men. This study evaluated the effects of these exercises on cortical and trabecular bone and its 3D distribution across the proximal femur, using clinical CT. Fifty healthy men had pelvic CT scans before and after the exercise intervention. We used hip QCT analysis to quantify BMC in traditional regions of interest and estimate biomechanical variables. Cortical bone mapping localized cortical mass surface density and endocortical trabecular density changes across each proximal femur, which involved registration to a canonical proximal femur model. Following statistical parametric mapping, we visualized and quantified statistically significant changes of variables over time in both legs, and significant differences between legs. Thirty-four men aged mean (SD) 70 (4) years exercised for 12-months, attending 92% of prescribed sessions. In traditional regions of interest, cortical and trabecular BMC increased over time in both legs. Cortical BMC at the trochanter increased more in the exercise than control leg, whereas femoral neck buckling ratio declined more in the exercise than control leg. Across the entire proximal femur, cortical mass surface density increased significantly with exercise (2.7%; p < 0.001), with larger changes (> 6%) at anterior and posterior aspects of the femoral neck and anterior shaft. Endocortical trabecular density also increased (6.4%; p < 0.001), with localized changes of > 12% at the anterior femoral neck, trochanter, and inferior femoral head. Odd impact exercise increased cortical mass surface density and endocortical trabecular density, at regions that may be important to structural integrity. These exercise-induced changes were localized rather than being evenly distributed across the proximal femur.

In Vivo Precision of Digital Topological Skeletonization Based Individual Trabecula Segmentation (ITS) Analysis of Trabecular Microstructure at the Distal Radius and Tibia by HR-pQCT

Trabecular plate and rod microstructure plays a dominant role in the apparent mechanical properties of trabecular bone. With high-resolution computed tomography (CT) images, digital topological analysis (DTA) including skeletonization and topological classification was applied to transform the trabecular three-dimensional (3D) network into surface and curve skeletons. Using the DTA-based topological analysis and a new reconstruction/recovery scheme, individual trabecula segmentation (ITS) was developed to segment individual trabecular plates and rods and quantify the trabecular plate- and rod-related morphological parameters. High-resolution peripheral quantitative computed tomography (HR-pQCT) is an emerging in vivo imaging technique to visualize 3D bone microstructure. Based on HR-pQCT images, ITS was applied to various HR-pQCT datasets to examine trabecular plate- and rod-related microstructure and has demonstrated great potential in cross-sectional and longitudinal clinical applications. However, the reproducibility of ITS has not been fully determined. The aim of the current study is to quantify the precision errors of ITS plate-rod microstructural parameters. In addition, we utilized three different frequently used contour techniques to separate trabecular and cortical bone and to evaluate their effect on ITS measurements. Overall, good reproducibility was found for the standard HR-pQCT parameters with precision errors for volumetric BMD and bone size between 0.2%-2.0%, and trabecular bone microstructure between 4.9%-6.7% at the radius and tibia. High reproducibility was also achieved for ITS measurements using all three different contour techniques. For example, using automatic contour technology, low precision errors were found for plate and rod trabecular number (pTb.N, rTb.N, 0.9% and 3.6%), plate and rod trabecular thickness (pTb.Th, rTb.Th, 0.6% and 1.7%), plate trabecular surface (pTb.S, 3.4%), rod trabecular length (rTb.ℓ, 0.8%), and plate-plate junction density (P-P Junc.D, 2.3%) at the tibia. The precision errors at the radius were similar to those at the tibia. In addition, precision errors were affected by the contour technique. At the tibia, precision error by the manual contour method was significantly different from automatic and standard contour methods for pTb.N, rTb.N and rTb.Th. Precision error using the manual contour method was also significantly different from the standard contour method for rod trabecular number (rTb.N), rod trabecular thickness (rTb.Th), rod-rod and plate-rod junction densities (R-R Junc.D and P-R Junc.D) at the tibia. At the radius, the precision error was similar between the three different contour methods. Image quality was also found to significantly affect the ITS reproducibility. We concluded that ITS parameters are highly reproducible, giving assurance that future cross-sectional and longitudinal clinical HR-pQCT studies are feasible in the context of limited sample sizes.

Trabecular plates and rods determine elastic modulus and yield strength of human trabecular bone

The microstructure of trabecular bone is usually perceived as a collection of plate-like and rod-like trabeculae, which can be determined from the emerging high-resolution skeletal imaging modalities such as micro-computed tomography (μCT) or clinical high-resolution peripheral quantitative CT (HR-pQCT) using the individual trabecula segmentation (ITS) technique. It has been shown that the ITS-based plate and rod parameters are highly correlated with elastic modulus and yield strength of human trabecular bone. In the current study, plate-rod (PR) finite element (FE) models were constructed completely based on ITS-identified individual trabecular plates and rods. We hypothesized that PR FE can accurately and efficiently predict elastic modulus and yield strength of human trabecular bone. Human trabecular bone cores from proximal tibia (PT), femoral neck (FN) and greater trochanter (GT) were scanned by μCT. Specimen-specific ITS-based PR FE models were generated for each μCT image and corresponding voxel-based FE models were also generated in comparison. Both types of specimen-specific models were subjected to nonlinear FE analysis to predict the apparent elastic modulus and yield strength using the same trabecular bone tissue properties. Then, mechanical tests were performed to experimentally measure the apparent modulus and yield strength. Strong linear correlations for both elastic modulus (r(2) = 0.97) and yield strength (r(2) = 0.96) were found between the PR FE model predictions and experimental measures, suggesting that trabecular plate and rod morphology adequately captures three-dimensional (3D) microarchitecture of human trabecular bone. In addition, the PR FE model predictions in both elastic modulus and yield strength were highly correlated with the voxel-based FE models (r(2) = 0.99, r(2) = 0.98, respectively), resulted from the original 3D images without the PR segmentation. In conclusion, the ITS-based PR models predicted accurately both elastic modulus and yield strength determined experimentally across three distinct anatomic sites. Trabecular plates and rods accurately determine elastic modulus and yield strength of human trabecular bone.