Candida albicans biofilms on different materials for manufacturing implant abutments and prostheses

Assessment of surface roughness and microbiological retention on custom abutments produced by different techniques and materials

The aims of this study were twofold: first, to investigate the surface roughness of different abutment materials prepared using various manufacturing methods; and, second, to evaluate colonization by Streptococcus mutans and Candida albicans according to abutment material and manufacturing method. Six material/manufacturing method combinations were investigated in this study, namely chromium-cobalt (Cr-Co) (prepared using casting, milling, and laser sintering) and titanium, zirconia, and anodized titanium (all prepared using milling); titanium (stock) abutments were used as the control group. Surface roughness of seven specimens from each group was evaluated using atomic force microscopy and scanning electron microscopy. Laser-sintered Cr-Co had the lowest values of Ra (mean ± SD = 4.8 ± 0.8  nm), Rq (mean ± SD = 7.0 ± 1.2 nm), and Rmax (mean ± SD = 133.5 ± 31.7 nm), whereas milled zirconia had the highest values of Ra (mean ± SD = 112.9 ± 44.2 nm), Rq (mean ± SD = 142.8 ± 54.0 nm), and Rmax (mean ± SD = 1,035.7 ± 350.4 nm). Three specimens from each group were infected with S. mutans and three with C. albicans, and microbial counts were evaluated after culture. Colonization of Streptococcus mutans was highest on milled zirconia (mean log10 count ± SD = 5.87 ± 0.08) and lowest on milled Cr-Co (mean log10 count ± SD = 4.04 ± 0.11). For C. albicans, colonization was highest on milled titanium stock (mean log10 count ± SD = 6.62 ± 0.03) and lowest on milled anodized titanium (mean log10 count ± SD = 6.13 ± 0.03). Differences in surface roughness and microbial colonization among groups can aid clinicians in selecting materials based on clinical relevance, considering their potential impact on outcomes.

Determination of streptococcus mutans retention in acidic and neutral pH artificial saliva environment of all-ceramic materials with different surface treatment

BACKGROUND

Although surface finishing processes are effective against Streptococcus mutans biofilm, the mechanism of action of saliva with different acidity values ​​has not been studied in detail. This study aims to produce four different all-ceramic materials in a single session with CAD/CAM devices and apply two different surface finishing processes, glazing and polishing, and then determine the retention of Streptococcus mutants on the surfaces of the materials in saliva with varying levels of acidity.

METHODS

Zirconia-reinforced lithium silicate (Vita Suprinity, Vita Zahnfabrik, Bad Saöckingen, Germany), monochromatic feldspar (Vitablocs Mark 2, Vita Zahnfabrik, Bad Saöckingen, Germany), leucite glass ceramic (IPS Empress CAD, Ivoclar Vivadent, Liechtenstein), and monolithic zirconia (Incoris TZI (Cerec) Sirona, Germany) were used in the study. The surface roughness values ​​of all samples were measured with a profilometer before the application of S. mutans biofilm. A modified Fusayama artificial saliva model was prepared to reflect the oral environment. S. mutans bacterial biofilm growth rate was determined for each group with tetrazolium dye (MTT) assay and the colony-forming unit (CFU/mL). Scanning electron microscopy was used to compare the efficacy of all-ceramic materials against bacterial biofilm.

RESULTS

The surface treatment applied with polishing rubber (Ra 0.18-0.33) resulted in a slightly less rough surface than the glaze (Ra 0.32-0.35) treatment. S. mutans showed less retention in ceramic samples treated with the pH 5 saliva compared to the pH 7 ones. When this group's percentage growth rates, colony-forming units, and scanning electron microscopy images colored with ImageJ were examined, the Glaze application reduced growth (65.02 - 91.38%) and colony formation (6.1 × 1010 - 7.8 × 1010) in all samples except for Vita Suprinity compared to the Polishing Rubber application (p < 0.05).

CONCLUSION

The pH of the salivary, the surface roughness, and the chemical content of the ceramic samples may directly affect the S. mutans biofilm formations. The Polishing Rubber of the surface treatment type should only be suggested for Vita Suprinity, whereas the Glaze of the surface treatment type should be proposed for Vita Block Mark II and InCoris TZI in an acidic salivary environment. A surface treatment method other than Glaze and Polishing Rubber should be preferred for IPS Empress CAD.

Exploring the anti-biofilm and gene regulatory effects of anti-inflammatory drugs on Candida albicans

Researchers have repurposed several existing anti-inflammatory drugs as potential antifungal agents in recent years. So, this study aimed to investigate the effects of anti-inflammatory drugs on the growth, biofilm formation, and expression of genes related to morphogenesis and pathogenesis in Candida albicans. The minimum inhibitory concentration (MIC) of anti-inflammatory drugs was assessed using the broth microdilution method. Biofilm formation in C. albicans was evaluated using XTT reduction assay following exposure to different concentrations of drugs. Additionally, the expression of adhesin-related genes (ALS1, ALS3), hyphal cell wall specific genes (EAP1, HWP1), secreted aspartyl proteinase (SAP4, SAP6), and morphogenesis pathway regulatory gene (EFG1) was analyzed using quantitative RT-PCR. Betamethasone and dexamethasone markedly inhibited C. albicans biofilm formation by up to 80% at a concentration of 2 mg/mL. Moreover, the inhibition of C. albicans biofilm formation was significant at concentrations ranging from 0.6 to 10 mg/mL for piroxicam and from 0.75 to 12 mg/mL for diclofenac. The expression of key genes involved in biofilm formation including EFG1, HWP1, and ALS3 was all downregulated under hyphae-inducing conditions. Moreover, the expression proteinase genes of C. albicans were upregulated following exposure with corticosteroids. The data obtained provides valuable insights into the antifungal potential of anti-inflammatory drugs. Our novel findings indicate the downregulation of several Candida genes that are crucial for morphogenesis, pathogenesis, and biofilm formation. However, further research is necessary to fully elucidate the clinical applications and effectiveness of anti-inflammatory drugs as alternative or adjunctive therapies for Candida infections.

Cyclic strain of poly (methyl methacrylate) surfaces triggered the pathogenicity of Candida albicans

Candida albicans is an opportunistic yeast and the primary etiological factor in oral candidiasis and denture stomatitis. The pathogenesis of C. albicans could be triggered by several variables, including environmental, nutritional, and biomaterial surface cues. Specifically, biomaterial interactions are driven by different surface properties, including wettability, stiffness, and roughness. Dental biomaterials experience repetitive (cyclic) stresses from chewing and biomechanical movements. Pathogenic biofilms are formed over these biomaterial surfaces under cyclic strain. This study investigated the effect of the cyclic strain (deformation) of biomaterial surfaces on the virulence of Candida albicans. Candida biofilms were grown over Poly (methyl methacrylate) (PMMA) surfaces subjected to static (no strain) and cyclic strain with different levels (ε˜x=0.1 and 0.2%). To evaluate the biomaterial-biofilm interactions, the biofilm characteristics, yeast-to-hyphae transition, and the expression of virulent genes were measured. Results showed the biofilm biomass and metabolic activity to be significantly higher when Candida adhered to surfaces subjected to cyclic strain compared to static surfaces. Examination of the yeast-to-hyphae transition showed pseudo-hyphae cells (pathogenic) in cyclically strained biomaterial surfaces, whereas static surfaces showed spherical yeast cells (commensal). RNA sequencing was used to determine and compare the transcriptome profiles of cyclically strained and static surfaces. Genes and transcription factors associated with cell adhesion (CSH1, PGA10, and RBT5), biofilm formation (EFG1), and secretion of extracellular matrix (ECM) (CRH1, ADH5, GCA1, and GCA2) were significantly upregulated in the cyclically strained biomaterial surfaces compared to static ones. Genes and transcription factors associated with virulence (UME6 and HGC1) and the secretion of extracellular enzymes (LIP, PLB, and SAP families) were also significantly upregulated in the cyclically strained biomaterial surfaces compared to static. For the first time, this study reveals a biomaterial surface factor triggering the pathogenesis of Candida albicans, which is essential for understanding, controlling, and preventing oral infections. STATEMENT OF SIGNIFICANCE: Fungal infections produced by Candida albicans are a significant contributor to various health conditions. Candida becomes pathogenic when certain environmental conditions change, including temperature, pH, nutrients, and CO2 levels. In addition, surface properties, including wettability, stiffness, and roughness, drive the interactions between Candida and biomaterials. Clinically, Candida adheres to biomaterials that are under repetitive deformation due to body movements. In this work, we revealed that when Candida adhered to biomaterial surfaces subjected to repetitive deformation, the microorganism becomes pathogenic by increasing the formation of biofilms and the expression of virulent factors related to hyphae formation and secretion of enzymes. Findings from this work could aid the development of new strategies for treating fungal infections in medical devices or implanted biomaterials.

Evaluation of Candida albicans biofilm formation on conventional and computer-aided-design/computer-aided manufacturing (CAD/CAM) denture base materials

Background and Purpose

The human mouth mucosal surface is colonized by indigenous microflora, which normally maintains an ecological balance among different species. However, certain environmental or biological factors may disrupt this balance, leading to microbial diseases. Candida albicans biofilms are formed on indwelling medical devices and have an association with both oral and invasive candidiasis. This study aimed to compare the amount of adherent C. albicans and the biofilm formed on different denture base materials. The adhesion of C. albicans to denture base materials is widely recognized as the main reason for the development of denture stomatitis.

Materials and Methods

In total, 56 polymethyl methacrylate (PMMA) acrylic resin disc-shaped samples were divided into four groups as follows: 1) chemically polymerized PMMA, 2) heat-polymerized PMMA, 3) computer-aided design and computer-aided manufacturing (CAD/CAM) PMMA in high polish, and 4) CAD/CAM resins in glazed form. The adherent cells and formation of C. albicans strains (562, 1905, 1912, and 1949) biofilm were measured by the 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) method and use of a microplate reader. Moreover, morphological alterations of C. albicans cells were investigated using scanning electron microscopy (SEM).

Results

The biofilm formation was significantly lower on CAD/CAM acrylic resins, compared to conventional denture base materials. The obtained results were confirmed by the SEM images of C. albicans biofilms. CAD/CAM PMMA-based polymers may be preferable to inhibit C. albicans biofilm formation and reduce Candida-associated denture stomatitis in long-term use.

Conclusion

Based on the findings, the CAD/CAM technique can be used as an efficient technique for denture fabrication as it inhibits microbial accumulation, and consequently, microbial biofilm.

Mechanical, Chemical, and Biological Properties of 3D-Printed Abutments: A Systematic Review

Aim:

A systematic review of the methods of 3D printing and the materials used so far for the manufacture of abutments was performed to evaluate whether their clinical use is indicated through the mechanical, chemical, and biological analyses carried out.

Materials and Methods:

An electronic search conducted by three independent reviewers was carried out in the PubMed, Web of Science, Cochrane Library, Science Direct, and Lilac databases. The inclusion criterion was researching articles in English that contained as subject the manufacturing of abutments through 3D printing/additive manufacturing. Any meta-analyses, reviews, book chapters, abstracts, letters, conferences papers, and studies without abutments printed were excluded.

Results:

We found 780 references, which after applying the exclusion criteria resulted in the final inclusion of seven articles for review. The studies had a high heterogeneity, showing different materials and methodologies to manufacture abutments, which makes a comparison between them difficult, and for this reason it was not possible to carry out a meta-analysis with the data found.

Conclusions:

Even with the limitations found in the present research, it is possible to conclude that printed abutments have adequate mechanical, chemical, and biological properties that can indicate their clinical use. 3D printing presents high accuracy and speed and can produce customized abutments according to each case.

Ceragenin CSA-44 as a Means to Control the Formation of the Biofilm on the Surface of Tooth and Composite Fillings

Recurrent oral infections, as manifested by endodontic and periodontal disease, are often caused by Enterococcus faecalis (E. faecalis) and Candida albicans (C. albicans). Here, we assessed the anti-biofilm activity of ceragenin CSA-44 against these microbes growing as a biofilm in the presence of saliva on the surface of human teeth and dental composite (composite filling) subjected to mechanical stresses. Methods: Biofilm mass analysis was performed using crystal violet (CV) staining. The morphology, viscoelastic properties of the biofilm after CSA-44 treatment, and changes in the surface of the composite in response to biofilm presence were determined by AFM microscopy. Results: CSA-44 prevented biofilm formation and reduced the mass of biofilm formed by tested microorganisms on teeth and dental composite. Conclusion: The ability of CSA-44 to prevent the formation and to reduce the presence of established biofilm on tooth and composite filling suggests that it can serve as an agent in the development of new methods of combating oral pathogens and reduce the severity of oral infections.

In vitro and in vivo anti-Candida activity of citral in combination with fluconazole

Background

The ability of Candida to develop biofilms on inert surfaces or living tissues favors recalcitrant and chronic candidiasis associated, in many instances, with resistance to current antifungal therapy.

Aim

The aim of this study was to evaluate the antifungal activity of citral, a phytocompound present in lemongrass essential oil, in monotherapy and combined with fluconazole against azole-resistant Candida planktonic cells and biofilms. The effect of citral combined with fluconazole was also analysed with regard to the expression of fluconazole resistance-associated genes in Candida albicans and the effectiveness of the combination therapy in a Caenorhabditis elegans model of candidiasis.

Results

Citral reduced biofilm formation at initial stages and the metabolic activity of the mature biofilm. The combination of citral with fluconazole was synergistic, with a significant increase in the survival of C. elegans infected with Candida. RNA analysis revealed a reduction of the expression of the efflux pump encoded by MDR1, leading to a greater effect of fluconazole.

Conclusion

Citral in monotherapy and in combination with fluconazole could represent an interesting therapy to treat recalcitrant Candida infections associated to biofilms.

Occlusal change in posterior implant-supported single crowns and its association with peri-implant bone level: a 5-year prospective study

OBJECTIVES

This study aims to analyze the 5-year occlusal change in posterior implant-supported single crowns and the association between the relative occlusal force (ROF) and peri-implant bone level.

MATERIALS AND METHODS

Partially edentulous patients who had received implant-supported single crowns in the posterior region were included. Occlusal examinations with a computerized occlusion analysis system were conducted at 0.5, 3, 6, 12, 24, 36, 48, and 60 months after delivery of the implant-supported single crown. The ROFs of implant-supported single crowns, mesial adjacent teeth, and control natural teeth were recorded. Intraoral periapical radiographs were taken at each follow-up time to evaluate marginal bone level (MBL). Ordinary least square regression was used to analyze the association between ROF and MBL.

RESULTS

Thirty-seven posterior implant-supported single crowns in 33 participants (23.9 to 70.0 years) were followed up for 0.5 to 60 months [(42.4 ± 26.0) months]. The ROF of implant-supported single crowns increased from 2 weeks to 3 months (P < 0.01) and increased continuously between all two sequential time points from 6 to 36 months, with significant differences (P < 0.05). Then ROFs of implant-supported single crowns were significantly higher than those of control teeth at 48 and 60 months (P < 0.05). Regression analysis showed that ROF was significantly associated with MBL with a coefficient of 0.008 (P < 0.05).

CONCLUSION

The ROFs of posterior implant-supported single crown have significant change during 5 years' follow-up. The association between ROF and MBL has limited clinical significance.

TRIAL REGISTRATION

Chinese Clinical Trial Registry: ChiCTR-ROC-17012240.

CLINICAL RELEVANCE

The occlusion of implant-supported single crowns should be carefully monitored during follow-up examinations, and occlusal adjustment should be considered to prevent overloading.

Probiotics: Potential Novel Therapeutics Against Fungal Infections

The global infection rate of fungal diseases is increasing year by year, and it has gradually become one of the most serious infectious diseases threatening human health. However, the side effects of antifungal drugs and the fungal resistance to these drugs are gradually increasing. Therefore, the development of new broad-spectrum, safe, and economical alternatives to antibacterial drugs are essential. Probiotics are microorganisms that are beneficial for human health. They boost human immunity, resist pathogen colonization, and reduce pathogen infection. Many investigations have shown their inhibitory activity on a wide range of pathogenic fungi. However, their antibacterial mechanism is still a secret. This article reviews the progress of probiotics as a new method for the treatment of fungal diseases.

Oral Candidal Colonization in Patients with Different Prosthetic Appliances

Oral infections caused by Candida species are becoming more common, which may be related to an increase in the number of immunologically compromised patients as well as favorable conditions in the oral cavity that often include removable prosthetic appliances. The purpose of this study was to determine the presence of a particular Candida species in patients with PMMA and Cr-Co prosthetic appliances, as well as the salivary flow rate, and oral signs and symptoms. This investigation included a total of 120 subjects with different kinds of removable dentures. A sample of concentrated oral rinse was collected from all subjects in order to detect Candida colonization and identify the Candida species, a quantum of salivation was measured, and subjects were examined clinically. Candida spp. was predominant among the subjects who were denture wearers (p < 0.0001). In all subjects, the most frequently detected species was C.albicans. A statistically significant difference was found between the prevalence of C.albicans (p < 0.001) and C.krusei (p < 0.001) in denture wearers. Subjects with PMMA-based removable prosthetic appliances mostly demonstrated a significant decrease in salivation (p < 0.001), an increase in burning sensations (p < 0.001), and dry mouth (p < 0.001) compared to the subjects who wore partial dentures with Co–Cr metallic frameworks. Red oral lesions were more frequently found among the subjects with partial dentures with Co–Cr metallic frameworks (p < 0.001). Regardless of the material used for the denture, patients must be regularly checked by their dentists in order to prevent the development of oral lesions.

Implant-prosthetic treatment in patients with oral lichen planus: A systematic review

AIMS

This review is aiming on identifying the ideal implant-prosthetic treatment design in patients with OLP.

METHODS AND RESULTS

A systematic review was conducted using four electronic databases; Medline (PubMed), Cochrane library, DOAJ and SCOPUS, following the PRISMA statement recommendations to answer the PICO question: "which implant-prosthetic treatment design is most useful to ensure implant survival in OLP patients?". The study was pre-registered in PROSPERO (CRD 42020220102). Included articles quality was assessed using the "Newcastle-Ottawa scale" and the JBI critical appraisal tool for case series. No article was found specifically designed to analyze the prosthetic influence on implant survival in OLP patients. Despite, information about implant-prostheses in studies designed with other goals was compiled. Eight articles that involved 141 patients and 341 implants were finally selected. The weighted mean follow-up was 38 months and the weighted mean survival of the implants 98.9%. No statistical differences were observed between cemented or screw retained prostheses and the materials employed or the technology to manufacture the prostheses.

CONCLUSION

The influence of prosthetic design on implant survival in OLP patients is still poorly understood, but important clinical recommendations can be drawn. The strength of evidence was grade 3b (CEBM) or low (GRADE).

Organic Antifungal Drugs and Targets of Their Action

In recent decades, there has been a significant increase in the number of fungal diseases. This is due to a wide spectrum of action, immunosuppressants and other group drugs. In terms of frequency, rapid spread and globality, fungal infections are approaching acute respiratory infections. Antimycotics are medicinal substances endorsed with fungicidal or fungistatic properties. For the treatment of fungal diseases, several groups of compounds are used that differ in their origin (natural or synthetic), molecular targets and mechanism of action, antifungal effect (fungicidal or fungistatic), indications for use (local or systemic infections), and methods of administration (parenteral, oral, outdoor). Several efforts have been made by various medicinal chemists around the world for the development of antifungal drugs with high efficacy with the least toxicity and maximum selectivity in the area of antifungal chemotherapy. The pharmacokinetic properties of the new antimycotics are also important: the ability to penetrate biological barriers, be absorbed and distributed in tissues and organs, get accumulated in tissues affected by micromycetes, undergo drug metabolism in the intestinal microflora and human organs, and in the kinetics of excretion from the body. There are several ways to search for new effective antimycotics: - Obtaining new derivatives of the already used classes of antimycotics with improved activity properties. - Screening of new chemical classes of synthetic antimycotic compounds. - Screening of natural compounds. - Identification of new unique molecular targets in the fungal cell. - Development of new compositions and dosage forms with effective delivery vehicles. The methods of informatics, bioinformatics, genomics and proteomics were extensively investigated for the development of new antimycotics. These techniques were employed in finding and identification of new molecular proteins in a fungal cell; in the determination of the selectivity of drugprotein interactions, evaluation of drug-drug interactions and synergism of drugs; determination of the structure-activity relationship (SAR) studies; determination of the molecular design of the most active, selective and safer drugs for the humans, animals and plants. In medical applications, the methods of information analysis and pharmacogenomics allow taking into account the individual phenotype of the patient, the level of expression of the targets of antifungal drugs when choosing antifungal agents and their dosage. This review article incorporates some of the most significant studies covering the basic structures and approaches for the synthesis of antifungal drugs and the directions for their further development.

Clinical study of the biofilm of implant-supported complete dentures in healthy patients

OBJECTIVE

The purpose of this study was to quantify the area covered by biofilm and identify bacteria and yeasts present in mandibular acrylic resin full-arch implant-supported fixed prostheses.

BACKGROUND

Biofilm control of implant-supported fixed prosthesis is hampered by their design, and it can cause oral and systemic problems, mainly in immunocompromised patients like the elder. Knowledge about microbiota reinforces the awareness about the need for periodic professional cleaning maintenance.

MATERIALS AND METHODS

Twenty prostheses were unscrewed, washed in 0.89% sodium chloride, stained with eosin 1% and photographed. The area covered by biofilm was digitally delimited and quantified. Biofilm samples were collected, diluted up to 1:10⁷ , seeded in chromogenic agar media and incubated for 48 hours, at 37°C, for counting of colony-forming units (CFU/mL). DNA hybridization was performed to complement the identification and quantification of microorganisms. Data were analyzed using Mann-Whitney test, Spearman correlation and Fisher's exact test (α = .05).

RESULTS

An average of 62% of the gingival surface of the prostheses was covered by biofilm. Enterococcus spp. (5.82 ± 1.38 log₁₀ CFU/mL) and Staphylococcus aureus (5.75 ± 2.02 log₁₀ CFU/mL) showed higher prevalence in cultures. Patients with five implants had less biofilm compared to those with four implants (P = .031) but had higher Escherichia coli counts (P = .039). In DNA hybridization, Streptococcus pneumoniae, Veillonella parvula and Fusobacterium nucleatum presented higher quantification and were present in all the samples; patients over 65 years old contained more Candida tropicalis (P = .049); prostheses on five implants presented lower quantification for several species.

CONCLUSION

Biofilm was present on all prostheses, containing potentially pathogenic microorganisms. The number of implants may play a role in quantification of biofilm and in microorganism counts.