Study of the Mechanical Properties of the Novel Zirconia-reinforced Glass lonomer Cement

Herbalism and glass-based materials in dentistry: review of the current state of the art

Half a million different plant species are occurring worldwide, of which only 1% has been phytochemically considered. Thus, there is great potential for discovering novel bioactive compounds. In dentistry, herbal extracts have been used as antimicrobial agents, analgesics, and intracanal medicaments. Glass-ionomer cement (GIC) and bioactive glass (BAG) are attractive materials in dentistry due to their bioactivity, adhesion, and remineralisation capabilities. Thus, this review summarizes the evidence around the use of phytotherapeutics in dental glass-based materials. This review article covers the structure, properties, and clinical uses of GIC and BAG materials within dentistry, with an emphasis on all the attempts that have been made in the last 20 years to enhance their properties naturally using the wisdom of traditional medicines. An extensive electronic search was performed across four databases to include published articles in the last 20 years and the search was concerned only with the English language publications. Publications that involved the use of plant extracts, and their active compounds for the green synthesis of nanoparticles and the modification of GIC and BAG were included up to May 2023. Plant extracts are a potential and effective candidate for modification of different properties of GIC and BAG, particularly their antimicrobial activities. Moreover, natural plant extracts have shown to be very effective in the green synthesis of metal ion nanoparticles in an ecological, and easy way with the additional advantage of a synergistic effect between metal ions and the phytotherapeutic agents. Medicinal plants are considered an abundant, cheap source of biologically active compounds and many of these phytotherapeutics have been the base for the development of new lead pharmaceuticals. Further research is required to assess the safety and the importance of regulation of phytotherapeutics to expand their use in medicine.

A Comprehensive Evaluation of Zirconia-Reinforced Glass Ionomer Cement's Effectiveness in Dental Caries: A Systematic Review and Network Meta-Analysis

Dental cements are in a constant state of evolution, adapting to better align with the intricacies of tooth structure and the dynamic movements within the oral cavity. This study aims to evaluate the efficacy of zirconia-reinforced glass ionomer cement-an innovative variant of modified glass ionomer cements-in terms of its ability to withstand compressive forces and prevent microleakage during dental caries reconstruction. An extensive search was conducted across various databases, encompassing PubMed-MEDLINE, Scopus, Embase, Google Scholar, prominent journals, unpublished studies, conference proceedings, and cross-referenced sources. The selected studies underwent meticulous scrutiny according to predetermined criteria, followed by the assessment of quality and the determination of evidence levels. In total, 16 studies were incorporated into this systematic review and network meta-analysis (NMA). The findings suggest that both compomer and giomer cements exhibit greater compressive strength and reduced microleakage values than zirconia-reinforced glass ionomer cement. In contrast, resin-modified glass ionomer cement (RMGIC) and high-viscosity glass ionomer cement (GIC) demonstrate less favorable performance in these regards when compared with zirconia-reinforced glass ionomer cement.

Comparative evaluation of shear bond strength of three different glass ionomer cement (conventional, zirconium-reinforced and advanced glass hybrid) in primary molars: an in vitro study

PURPOSE

The success of restorative materials is largely dependent on their capacity to adhere to the tooth structure and withstand the various forces present in the oral cavity. So, the aim of present study was to evaluate and compare the shear bond strength (SBS) of Type IX Glass Ionomer Cement (GIC), Zirconomer, and Gold Label Hybrid GIC in primary molars.

METHODS

Thirty primary molars were selected based on inclusion and exclusion criteria. The molars were polished to provide a flat dentin surface after being inserted in auto polymerizing acrylic resin. The samples were randomly divided into three groups, equally and were bonded to GIC. On the dentin surface, restoration cylinders were made using a plastic mould that had an internal diameter and height of 5 mm and 3 mm, respectively. The cement was manipulated according to the manufacturer's directions through the plastic mould. Then, the samples were stored at room temperature for 10 days to mimic oral conditions. The Universal Testing Machine was used to test SBS. One-way ANOVA and the post hoc Tukey test were used to statistically assess the collected data.

RESULTS

A statistically significant difference was found in all three groups (p < 0.01), with Zirconomer demonstrating highest SBS, followed by Type IX GIC and Gold Label Hybrid GIC.

CONCLUSION

The SBS value of Zirconomer was better when compared to Type IX GIC and Gold Label Hybrid GIC.

Evaluation and Comparison of Physical Properties of Cention N with Other Restorative Materials in Artificial Saliva: An In Vitro Study

Objective

The objective of the study was to determine and compare flexural strength and microhardness of Cention N with Glass ionomer cement (GIC) (GC Gold Label Type IX Extra) and Zirconomer improved at a distinctive time period in artificial saliva.

Materials and methods

Cention N, GC Gold Label Type IX Extra, Zirconomer improved for the fabrication of samples. To determine the physical properties such as flexural strength and microhardness, test samples (n-30) of dimensions 12 mm (length)*4 mm (breadth)*2 mm (thickness) were made and divided into three groups. Every sample was dipped for 28 days in a plastic tube containing 5 mL of artificial saliva. Statistical analysis was done using one-way ANOVA with a post hoc test, intergroup and intragroup analyses were carried out.

Results

In an intergroup analysis, flexural strength and microhardness of Cention N were substantially higher than Zirconomer improved and GIC (GC Gold Label Type IX Extra), respectively. In intragroup analysis found that there was a significant decrease (p < 0.001) in the level of flexural strength as well as microhardness after samples were immersed in artificial saliva of group A (Cention N), group B (GC Gold Label Type IX Extra), and group C (Zirconomer improved) from 1st day to 28th day in artificial saliva.

Conclusion

It can be concluded that Cention N had the highest flexural strength and microhardness of the three materials tested. Zirconomer improved can be used as a basic filling material in various restorative procedures due to good comparable mechanical properties and is economical for patients.

How to cite this article

Adsul PS, Dhawan P, Tuli A, et al. Evaluation and Comparison of Physical Properties of Cention N with Other Restorative Materials in Artificial Saliva: An In Vitro Study. Int J Clin Pediatr Dent 2022;15(3):350-355.

The effect of bacterial cellulose nanocrystals on the shear bond strength of resin modified glass ionomer cement to dentin

Background

The present study aimed to investigate the effect of bacterial cellulose nanocrystals (BCNC) on the shear bond strength (SBS) of resin modified glass ionomer cement (RMGIC) to dentin.

Material and Methods

A total of 48 freshly extracted intact third molars were randomly divided into four main groups with three different concentrations (0.3%, 0.5% and 1% wt) of BCNC with RMGIC and control group without BCNC. These specimens were kept in distilled water at 37° C for 24h. Shear bond strength was examined, using the universal testing machine. Kruskal-Wallis test and Dunn`s post-hoc test were applied for analysis of data. P<0.05 was considered as the level of significance.

Results

The addition of a 1%wt of BCNC to the RMGIC led to a significant increase in the shear bond strength (7.17 ± 2.14) compared to the control group (2.09 ± 1.80) (P=0.007). The shear bond strength was improved up to 343%.

Conclusions

It was found that the incorporation of 1% wt BCNC to the RMGICs enhanced the SBS properties of the RMGIC significantly. Modifying RMGIC with BCNC might be advantageous in terms of improving the restorative material. Key words:Bacterial cellulose nanocrystals, RMGIC, Shear bond strength.

Evaluation of Fracture Toughness, Color Stability, and Sorption Solubility of a Fabricated Novel Glass Ionomer Nano Zirconia-Silica-Hydroxyapatite Hybrid Composite Material

The aim of this study was to investigate the effects of adding a nano zirconia-silica-hydroxyapatite (nanoZrO2-SiO2-HA) composite synthesized using a one-pot sol-gel technique to a conventional glass ionomer cement (GIC), which was then characterized using X-ray diffraction (XRD). Following the characterization studies, further investigations were carried out after the addition of nanoZrO2-SiO2-HA to cGIC (GIC nanoZrO2-SiO2-HA) at various percentages (~5% to 9%) to compare their fracture toughness, color stability, and sorption- solubility in relation to cGIC (Fuji IX). The XRD diffractogram indicated the presence of peaks for ZrO2, SiO2, and HA. The fracture toughness of GIC 5%nanoZrO2-SiO2-HA was statistically higher than that of other percentages of GIC nanoZrO2-SiO2-HA and cGIC. The highest values recorded were fracture toughness ( $1.35\pm 0.15\text{MPa}.{\text{m}}^{1/2}$ ), leading to an increase of ∼57%, as compared to cGIC. Overall, the color change ( $\Delta E$ ) values for GIC 5% nano Zr-Si-HA group were lower than those of cGIC over a one-month period and were between slight and perceptible. In addition, GIC 5%nanoZrO2-SiO2-HA recorded lower sorption values ( $23.64\pm 2.3\mu \text{gm}{\text{m}}^{-3}$ ) as compared to cGIC ( $36.28\pm 2.6\mu \text{gm}{\text{m}}^{-3}$ ) and higher solubility ( $66.46\pm 2.4\mu \text{gm}{\text{m}}^{-3}$ ) as compared to cGIC ( $56.76\pm 1.6\mu \text{gm}{\text{m}}^{-3}$ ). The addition of nanoZrO2-SiO2-HA to cGIC significantly enhanced its physicomechanical properties. Based on the results of our study, GIC nanoZrO2-SiO2-HA has the potential to be suggested as a restorative dental material with diverse applications ranging from cavity restoration, core build-up, and as a luting material.

Effect of resin coating on highly viscous glass ionomer cements: A dynamic analysis

OBJECTIVES

This study determined the effects of self-adhesive resin coatings on viscoelastic properties of highly viscous glass ionomer cements (HVGICs) using dynamic mechanical analysis.

MATERIALS AND METHODS

The HVGICs evaluated were Zirconomer [ZR] (Shofu), Equia Forte [EQ] (GC) and Riva [RV] (SDI). Sixty specimens (12mm x 2mm x 2mm) of each material were fabricated using customized Teflon molds. After initial set, the specimens were removed from their molds, finished, measured and randomly divided into 3 groups of 20. Half the specimens in each group were left uncoated while the remaining half was covered with the respective manufacturers' resin coating. The specimens were subsequently conditioned in distilled water, artificial saliva or citric acid at 37°C for 7 days. The uncoated and coated specimens (n=10) were then subjected to dynamic mechanical testing in flexure mode at 37°C with a frequency of 0.1 to 10Hz. Storage modulus, loss modulus and loss tangent data were subjected to normality testing and statistical analysis using one-way ANOVA/Scheffe's post-hoc test and Ttest at significance level p<0.05.

RESULTS

Mean storage modulus ranged from 1.39 ± 0.36 to 10.80 ± 0.86 GPa while mean loss modulus varied from 0.13 ± 0.03 to 0.70 ± 0.14 GPa after conditioning in the different mediums. Values for loss tangent ranged from 39.4 ± 7.75 to 213.2 ± 20.11 (x10 -3 ). Significant differences in visco-elastic properties were observed between mediums and materials. When conditioned in distilled water and artificial saliva,storage modulus was significantly improved when ZR, EQ and RV were uncoated. Significantly higher values were, however, observed with resin coating when the materials were exposed to citric acid.

CONCLUSION

The visco-elastic properties of HVGICs were influenced by both resin coating and chemical environment.

Mechanical properties enhancement of self-cured PMMA reinforced with zirconia and boron nitride nanopowders for high-performance dental materials

We report on the mechanical properties regarding self-cured acrylic polymethyl methacrylate (PMMA) reinforced with hexagonal boron nitride (h-BN) and stabilized zirconia (8Y ZrO₂) nanopowders. The nanocomposites were prepared by using both manual and ultrasonic mixing techniques. The fabricated specimens were subjected to micro indentation, bending strength, and modulus of elasticity measurements. A fully complete polymerization process under liquid monomer was provided by ultrasonic mixing as evidenced by Fourier transform infrared (FTIR) measurement. Independently of the nanopowder used, the hardness, bending strength, and modulus of elasticity of the formed nanocomposites highly increase in values with the increase of the filler concentrations. Higher bending strengths and modulus of elasticity of the nanocomposite were recorded when using h-BN nanopowder fillers whereas hardness increases when using 8Y ZrO₂ nanopowder. Results showed that with respect to the unloaded specimens made by manual mixing, ultrasonic mixing of PMMA with a 5 wt% h-BN increased the flexural strength (FS) and the modulus of elasticity or Young's modulus (YM) values to about 550% and 240%, respectively. However, a similar concentration of 8Y ZrO₂ increased the Vickers Hardness numbers (VH) to about 400%. This may suggest that PMMA loaded with a combination of h-BN and 8Y ZrO₂ nanopowders may lead to nanocomposites with outstanding mechanical performance.

Effect of Hexagonal Boron nitride Nanopowder Reinforcement and Mixing Methods on Physical and Mechanical Properties of Self-Cured PMMA for Dental Applications

We report for the first time on the effect of biocompatible hexagonal boron nitride (h-BN) nanopowder reinforcement with different concentrations on the structural and mechanical properties of fabricated self-cured polymethyl methacrylate (PMMA) based dental materials (GC UNIFAST III). A comparison among the structural and mechanical properties between hand and ultrasonic mixing is also presented. Fabricated specimens were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR), micro indentation, and flexural strength techniques. The ultrasonic mixing method provides better sample textures of the composite as compared to hand mixing. It is found that XRD and IR intensity of the peaks increases with the increase of h-BN concentration due to nanocomposite formation. The additions of h-BN nanoparticles to the acrylic resin enhanced the hardness and the flexibility values of the composites. Independently of the mixing method used, adding h-BN nanopowder relatively increases the Vickers Hardness numbers (VH) and Flexural Strength (FS) of the unmodified materials. However, using ultrasonic mixing method combined with h-BN nanopowder increases VH numbers to 300% and FS values to 550% with respect to the unmodified sample made by hand mixing. The results obtained are very encouraging and will support future research in vivo, to confirm whether PMMA loaded with h-BN nanoparticles is an improvement compared to current dental restorative materials.

Influence of conservative endodontic access and the osteoporotic bone on the restoration material adhesive behavior through finite element analysis

Assess, using finite element analysis, the adhesive behavior of Class I restorations under physiological occlusal loads on an endodontically treated first upper premolar with conventional and conservative crown opening surrounded by alveolar bone in normal and osteoporotic conditions. For this, four virtual models were used: M1-conservative access/normal bone; M2-conventional access/normal bone; M3-conservative access/osteoporotic bone; M4-conventional access/osteoporotic bone. On enamel, under axial load, the highest peaks occurred on conventional models and, under oblique load, the highest peaks occurred on conservative opening models. The bone condition showed no influence on the adhesive behavior. On dentin, under axial load, the models showed similar behaviors, regardless of the bone condition; under oblique load, the highest incidence of forces occurred on the distal region of the palatal root canal entrance and the highest peak was observed in the conventional opening model with normal bone. Also, under oblique load, conventional opening models showed larger values on dentin for the normal bone and similar for the osteoporotic. The conclusions shows higher displacement tensile strength peaks were observed in the conventional models, which can lead to a greater risk of adhesive failure on class I restorations with this opening. Therefore, a conservative opening would be recommended to avoid opening clinical complications. The bone condition showed no significant influence on adhesive behavior, except for dentin under oblique load, where conventional models showed larger values relative to normal bone and similar to the osteoporotic bone.

Chemical and morphological evaluation of enamel and dentin near cavities restored with conventional and zirconia modified glass ionomer subjected to erosion-abrasion

Microenergy dispersive X-ray fluorescence (μ-EDXRF) spectroscopy and scanning electron microscopy (SEM) were used to test the hypothesis that zirconia modified glass ionomer cement (GIC) could improve resistance to erosion-abrasion to a greater extent than conventional cement. Bovine enamel (n = 40) and dentin (n = 40) samples were prepared with cavities, filled with one of the two restorative materials (GIC: glass-ionomer cement or ZrGIC: zirconia-modified GIC). Furthermore, the samples were treated with abrasion-saliva (AS) or abrasion-erosion cycles (AE). Erosive cycles (immersion in orange juice, three times/day for a duration of 1 min over a 5 day period) and/or abrasive challenges (electric toothbrush, three times/day for a duration of 1 min over a 5 day period) were performed. Positive mineral variation (MV%) on the enamel after erosion-abrasion was observed for both materials (p < 0.05), whereas a negative MV% on the dentin was observed for both materials and treatments (p < 0.05). The SEM images showed clear enamel loss after erosion-abrasion treatment and material degradation was greater in GIC_AE compared to those of the other groups. Toothbrush abrasion showed a synergistic effect with erosion on substance loss of bovine enamel, dentin, GIC, and ZrGIC restorations. Zirconia addition to the GIC powder improved the resistance to abrasive-erosive processes. The ZrGIC materials may find application as a restorative material due to improved resistance as well as in temporary restorations and fissure sealants.

A Comparative Evaluation of Mechanical Properties of Four Different Restorative Materials: An In Vitro Study

OBJECTIVES

The purpose of this study is to compare the mechanical properties (compressive strength (CS) and diametral tensile strength (DTS)) of four different restorative materials: conventional glass ionomer (Fuji IX), ClearFil AP-X, Filtex Z350-XT, and Cention N.

MATERIALS AND METHODS

Specimens (n = 80) were prepared from Fuji IX, ClearFil AP-X, Filtex Z350-XT, and Cention N for testing compressive strength and DTS.

STATISTICAL ANALYSIS

Results obtained were subjected to one-way ANOVA and Tukey's post hoc test at significance (p < 0.001).

RESULTS

There were significant differences among restorative materials tested. ClearFil AP-X exhibits the highest mechanical properties (CS and DTS) and least values were obtained by the Fuji IX.

CONCLUSION

Strength is one of the most important criteria for the selection of a restorative material. Stronger materials better resist deformation and fracture, presenting more equitable stress distribution, greater probability, and greater stability of clinical success.

HOW TO CITE THIS ARTICLE

Iftikhar N, Devashish, et al. A Comparative Evaluation of Mechanical Properties of Four Different Restorative Materials: An In Vitro Study. Int J Clin Pediatr Dent 2019;12(1):47-49.

Modification of glass ionomer cements on their physical-mechanical and antimicrobial properties

OBJECTIVE

The aim of this review was to provide an insight about the factors affecting the properties of glass ionomer cements and provides a review regarding studies that are related to modification of glass ionomer cements to improve their properties, particularly on physical-mechanical and antimicrobial activity.

METHODS

PubMed and Science Direct were searched for papers published between the years 1974 and 2018. The search was restricted to articles written in English related to modification of glass ionomer cements. Only articles published in peer-reviewed journals were included. The search included literature reviews, in vitro, and in vivo studies. Articles written in other languages, without available abstracts and those related to other field were excluded. About 198 peer-review articles in the English language were reviewed.

CONCLUSION

Based on the finding, most of the modification has improved physical-mechanical properties of glass ionomer cements. Recently, researchers have attempted to improve their antimicrobial properties. However, the attempts were reported to compromise the physical-mechanical properties of modified glass ionomer cements.

CLINICAL SIGNIFICANCE

As the modification of glass ionomer cement with different material improved the physical-mechanical and antimicrobial properties, it could be used as restorative material for wider application in dentistry.