Highly efficient strategy of lipopolysaccharide (LPS) decontamination from rHBsAg: synergistic effect of enhanced magnetic nanoparticles (MNPs) as an LPS affinity adsorbent (LAA) and surfactant as a dissociation factor

The interaction of lipopolysaccharide with a recombinant protein is a serious bottleneck, particularly in the purification step of bioprocessing. Recombinant hepatitis B surface antigen (rHBsAg), the active ingredient of the hepatitis B vaccine, is probably contaminated by extrinsic LPS like other biopharmaceuticals. This research intends to eliminate LPS from its mixture with rHBsAg efficiently. Immobilized polymyxin B on magnetic nanoparticles (PMB-MNPs) was synthesized and implemented as an enhanced LPS affinity adsorbent (LAA). The 20-80 EU/dose binary samples with and without surfactant were applied to PMB-MNPs. Formerly, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were examined on the samples to qualitatively show the dissociation effect of the surfactant. Considering the high potential interaction of LPS with HBsAg, the dissociation effects of 0.5 and 1.5% Tween 20 on the binary samples were assessed using immunoaffinity chromatography (IAC) as a quantification tool. The dissociation effect of Tween 20 substantially diminished the interaction, leading to a proportional increase of free LPS up to 66%. The synergetic effect of Tween 20 and privileged LAA was highly effective in eliminating more than 80% of LPS with a remarkable LPS clearance factor of 5.8 and a substantial protein recovery rate of 97%.

Effective Endotoxin Removal from Chitosan That Preserves Chemical Structure and Improves Compatibility with Immune Cells

Chitosan is one of the most researched biopolymers for healthcare applications, however, being a naturally derived polymer, it is susceptible to endotoxin contamination, which elicits pro-inflammatory responses, skewing chitosan's performance and leading to inaccurate conclusions. It is therefore critical that endotoxins are quantified and removed for in vivo use. Here, heat and mild NaOH treatment are investigated as facile endotoxin removal methods from chitosan. Both treatments effectively removed endotoxin to below the FDA limit for medical devices (<0.5 EU/mL). However, in co-culture with peripheral blood mononuclear cells (PBMCs), only NaOH-treated chitosan prevented TNF-α production. While endotoxin removal is the principal task, the preservation of chitosan's structure is vital for the synthesis and lysozyme degradation of chitosan-based hydrogels. The chemical properties of NaOH-treated chitosan (by FTIR-ATR) were significantly similar to its native composition, whereas the heat-treated chitosan evidenced macroscopic chemical and physical changes associated with the Maillard reaction, deeming this treatment unsuitable for further applications. Degradation studies conducted with lysozyme demonstrated that the degradation rates of native and NaOH-treated chitosan-genipin hydrogels were similar. In vitro co-culture studies showed that NaOH hydrogels did not negatively affect the cell viability of monocyte-derived dendritic cells (moDCs), nor induce phenotypical maturation or pro-inflammatory cytokine release.

Microbial Production of Human Milk Oligosaccharides

Human milk oligosaccharides (HMOs) are complex nonnutritive sugars present in human milk. These sugars possess prebiotic, immunomodulatory, and antagonistic properties towards pathogens and therefore are important for the health and well-being of newborn babies. Lower prevalence of breastfeeding around the globe, rising popularity of nutraceuticals, and low availability of HMOs have inspired efforts to develop economically feasible and efficient industrial-scale production platforms for HMOs. Recent progress in synthetic biology and metabolic engineering tools has enabled microbial systems to be a production system of HMOs. In this regard, the model organism Escherichia coli has emerged as the preferred production platform. Herein, we summarize the remarkable progress in the microbial production of HMOs and discuss the challenges and future opportunities in unraveling the scope of production of complex HMOs. We focus on the microbial production of five HMOs that have been approved for their commercialization.

Genetically Encoded Self-Assembling Protein Nanoparticles for the Targeted Delivery In Vitro and In Vivo

Targeted nanoparticles of different origins are considered as new-generation diagnostic and therapeutic tools. However, there are no targeted drug formulations within the composition of nanoparticles approved by the FDA for use in the clinic, which is associated with the insufficient effectiveness of the developed candidates, the difficulties of their biotechnological production, and inadequate batch-to-batch reproducibility. Targeted protein self-assembling nanoparticles circumvent this problem since proteins are encoded in DNA and the final protein product is produced in only one possible way. We believe that the combination of the endless biomedical potential of protein carriers as nanoparticles and the standardized protein purification protocols will make significant progress in "magic bullet" creation possible, bringing modern biomedicine to a new level. In this review, we are focused on the currently existing platforms for targeted self-assembling protein nanoparticles based on transferrin, lactoferrin, casein, lumazine synthase, albumin, ferritin, and encapsulin proteins, as well as on proteins from magnetosomes and virus-like particles. The applications of these self-assembling proteins for targeted delivery in vitro and in vivo are thoroughly discussed, including bioimaging applications and different therapeutic approaches, such as chemotherapy, gene delivery, and photodynamic and photothermal therapy. A critical assessment of these protein platforms' efficacy in biomedicine is provided and possible problems associated with their further development are described.

Quantitative assessment of LPS-HBsAg interaction by introducing a novel application of immunoaffinity chromatography

Lipopolysaccharide (LPS), as a stubborn contamination, should be monitored and kept in an acceptable level during the pharmaceutical production process. Recombinant hepatitis B surface antigen (r-HBsAg) is one of the recombinant biological products, which is probable to suffer from extrinsic endotoxin due to its long and complex production process. This research aims to assess the potential interaction between LPS and r-HBsAg by recruiting immunoaffinity chromatography (IAC) as a novel tool to quantify the interaction. Molecular modeling was performed on the HBsAg molecule to theoretically predict its potential binding and interaction sites. Then dynamic light scattering (DLS) analysis was implemented on HBsAg, LPS, and mixtures of them to reveal the interaction. The virus-like particle (VLP) structure of HBsAg and the ribbon-like structure of LPS were visualized by transmission electron microscopy (TEM). Finally, the interaction was quantified by applying various LPS/HBsAg ratios ranging from 1.67 to 120 EU/dose in the IAC. Consequently, the LPS/HBsAg ratios in the eluate were measured from 1.67 to a maximum of 92.5 EU/dose. The results indicated that 77 to 100% of total LPS interacted with HBsAg by an inverse relationship to the incubated LPS concentration. The findings implied that the introduced procedure is remarkably practical in the quantification of LPS interaction with a target recombinant protein.

Preparation and characterization of polymyxin B- and histidine-coupled magnetic nanoparticles for purification of biologics from acquired endotoxin contamination

Background

Endotoxin is a major process-related impurity that can act as a strong immunostimulant leading to fever and hypotensive shock. Thus, the US FDA and international quality standards strictly direct the biologics manufacturers to control the endotoxin contamination during the purification process. In this work, a developed method for biologics purification from acquired endotoxin contamination is introduced. This is accomplished by the preparation of dextran-coated magnetic nanoparticles using a facile rapid co-precipitation method.

Results

The resulting magnetic nanoparticles (MNPs) are characterized by dynamic light scattering, transmission electron microscope, Fourier transform infrared spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The dextran-coated magnetic nanoparticles are further coupled to either polymyxin B or histidine to provide a positively charged ligand which enhances the affinity to the negatively charged endotoxin. Both ligands-coupled MNPs are tested for purification efficiency using the chromogenic kinetic assay. The method conditions are optimized using a two-level factorial design to achieve best purification conditions of the contaminated biologics and indicated endotoxin removal percentage 85.12% and maximum adsorption capacity of 38.5 mg/g, for histidine-coupled MNPs.

Conclusions

This developed method is introduced to serve biologics manufacturers to improve their manufacturing processes through providing a simple purifying tool for biologics from acquired endotoxin contamination.

Graphical Abstract

Protein purification strategies must consider downstream applications and individual biological characteristics

BACKGROUND

Proteins are used as reagents in a broad range of scientific fields. The reliability and reproducibility of experimental data will largely depend on the quality of the (recombinant) proteins and, consequently, these should undergo thorough structural and functional controls. Depending on the downstream application and the biochemical characteristics of the protein, different sets of specific features will need to be checked.

RESULTS

A number of examples, representative of recurrent issues and previously published strategies, has been reported that illustrate real cases of recombinant protein production in which careful strategy design at the start of the project combined with quality controls throughout the production process was imperative to obtain high-quality samples compatible with the planned downstream applications. Some proteins possess intrinsic properties (e.g., prone to aggregation, rich in cysteines, or a high affinity for nucleic acids) that require certain precautions during the expression and purification process. For other proteins, the downstream application might demand specific conditions, such as for proteins intended for animal use that need to be endotoxin-free.

CONCLUSIONS

This review has been designed to act as a practical reference list for researchers who wish to produce and evaluate recombinant proteins with certain specific requirements or that need particular care for their preparation and storage.

Process- and Product-Related Foulants in Virus Filtration

Regulatory authorities place stringent guidelines on the removal of contaminants during the manufacture of biopharmaceutical products. Monoclonal antibodies, Fc-fusion proteins, and other mammalian cell-derived biotherapeutics are heterogeneous molecules that are validated based on the production process and not on molecular homogeneity. Validation of clearance of potential contamination by viruses is a major challenge during the downstream purification of these therapeutics. Virus filtration is a single-use, size-based separation process in which the contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filtration is routinely used as part of the overall virus clearance strategy. Compromised performance of virus filters due to membrane fouling, low throughput and reduced viral clearance, is of considerable industrial significance and is frequently a major challenge. This review shows how components generated during cell culture, contaminants, and product variants can affect virus filtration of mammalian cell-derived biologics. Cell culture-derived foulants include host cell proteins, proteases, and endotoxins. We also provide mitigation measures for each potential foulant.

Effect of pH-Regulation on the Capture of Lipopolysaccharides from E. coli EH100 by Four-Antennary Oligoglycines in Aqueous Medium

Bacterial lipopolysaccharides (LPS) are designated as endotoxins, because they cause fever and a wide range of pathologies in humans. It is important to develop effective methodologies to detect trace quantities of LPS in aqueous systems. The present study develops a fine-tuning procedure for the entrapment of trace quantities of LPS from E. coli EH100. The capture agents are self-assemblies (tectomers) formed by synthetic four-antennary oligoglycine (C-(CH2-NH-Gly7)4, T4). Based on previously performed investigations of bulk and adsorption-layer properties of aqueous solutions containing T4 and LPS, the optimal conditions for the entrapment interactions are further fine-tuned by the pH regulation of aqueous systems. A combined investigation protocol is developed, including dynamic light scattering, profile analysis tensiometry, microscopic thin-liquid-film techniques, and transmission electron microscopy. The key results are: (1) two types of complexes between T4 and LPS are generated-amphiphilic species and "sandwich-like" hydrophilic entities; the complexes are smaller at lower pH, and larger at higher pH; (2) an optimum range of pH values is established within which the whole quantity of the LPS is entrapped by the tectomers, namely pH = 5.04-6.30. The obtained data substantiate the notion that T4 may be used for an effective capture and the removal of traces of endotoxins in aqueous systems.

Clinical relevance of abstruse transport phenomena in haemodialysis

Haemodialysis (HD) utilizes the bidirectional properties of semipermeable membranes to remove uraemic toxins from blood while simultaneously replenishing electrolytes and buffers to correct metabolic acidosis. However, the nonspecific size-dependent transport across membranes also means that certain useful plasma constituents may be removed from the patient (together with uraemic toxins), or toxic compounds, e.g. endotoxin fragments, may accompany electrolytes and buffers of the dialysis fluids into blood and elicit severe biological reactions. We describe the mechanisms and implications of these undesirable transport processes that are inherent to all HD therapies and propose approaches to mitigate the effects of such transport. We focus particularly on two undesirable events that are considered to adversely affect HD therapy and possibly impact patient outcomes. Firstly, we describe how loss of albumin (and other essential substances) can occur while striving to eliminate larger uraemic toxins during HD and why hypoalbuminemia is a clinical condition to contend with. Secondly, we describe the origins and mode of transport of biologically active substances (from dialysis fluids with bacterial contamination) into the blood compartment and biological reactions they elicit. Endotoxin fragments activate various proinflammatory pathways to increase the underlying inflammation associated with chronic kidney disease. Both phenomena involve the physical as well as chemical properties of membranes that must be selected judiciously to balance the benefits with potential risks patients may encounter, in both the short and long term.

High molecular pyrogens present in plant extracts interfere with examinations of their immunomodulatory properties in vitro

The widely accepted strategy to justify the use of medicinal plant extracts in diseases with inflammatory background is their examination on in vitro models using immune cells. It is also a key initial step of research for active principles, which could be then isolated and tested on more advanced models, becoming new pharmacologically active lead molecules. The crucial aspect which has not been so far addressed in this context, is the presence of pyrogens in plant preparations. The aim of this study was the examination of pyrogens interference with in vitro evaluation of anti-inflammatory activity of plant extracts using human primary neutrophils model together with introduction of effective method of interfering factors elimination. The obtained results showed that chosen plant extracts contained pyrogens, which were responsible for concentration-dependent stimulation of pro-inflammatory cytokines production by human neutrophils in vitro in the same extent as LPS did. The ultrafiltration method was successfully applied for pyrogens elimination, which effectiveness was confirmed using LAL test. The determined interference of pyrogens implies the necessity of their consideration and removal when in vitro studies include direct addition of plant extracts to the cell culture, what can be obtained by ultrafiltration, which does not affect extract composition.

Nanopharmaceuticals for Eye Administration: Sterilization, Depyrogenation and Clinical Applications

Simple Summary

Nanopharmaceuticals have revolutionized the way ophthalmic drugs are administered to overcome ocular delivery barriers and improve drug bioavailability. The design and production of an efficient ocular drug delivery system still remain a challenge. In this review, we discuss the sterilization and depyrogenation methods, commonly used for ophthalmic nanopharmaceuticals, and their clinical applications.

Abstract

As an immune-privileged target organ, the eyes have important superficial and internal barriers, protecting them from physical and chemical damage from exogenous and/or endogenous origins that would cause injury to visual acuity or even vision loss. These anatomic, physiological and histologic barriers are thus a challenge for drug access and entry into the eye. Novel therapeutic concepts are highly desirable for eye treatment. The design of an efficient ocular drug delivery system still remains a challenge. Although nanotechnology may offer the ability to detect and treat eye diseases, successful treatment approaches are still in demand. The growing interest in nanopharmaceuticals offers the opportunity to improve ophthalmic treatments. Besides their size, which needs to be critically monitored, nanopharmaceuticals for ophthalmic applications have to be produced under sterilized conditions. In this work, we have revised the different sterilization and depyrogenation methods for ophthalmic nanopharmaceuticals with their merits and drawbacks. The paper also describes clinical sterilization of drugs and the outcomes of inappropriate practices, while recent applications of nanopharmaceuticals for ocular drug delivery are also addressed.

Development of an Enzyme-Mediated, Site-Specific Method to Conjugate Toll-Like Receptor 2 Agonists onto Protein Antigens: Toward a Broadly Protective, Four Component, Group A Streptococcal Self-Adjuvanting Lipoprotein-Fusion Combination Vaccine

Subunit vaccines composed of protein antigens covalently attached to Toll-like receptor (TLR) agonists elicit superior immune responses compared to mixtures of antigens and TLR agonists. Among different conjugation approaches, enzyme-mediated ligation is one of the few that provides an opportunity for the generation of homogeneous, molecularly defined products in which protein antigens are maintained with native structures, which is most critical to elicit protective immune responses upon vaccination. Four highly conserved protein antigens from Group A Streptococcus (GAS) have the potential to be safe and efficacious vaccine candidates. After a TLR2 agonist fibroblast-stimulating lipopeptide-1 (FSL-1) was successfully attached onto each antigen using sortase A and techniques for their purification were developed, a combination vaccine containing interleukin 8 (IL-8) protease (Streptococcus pyogenes cell envelope proteinase [SpyCEP]), Group A Streptococcal C5a peptidase (SCPA), anchorless virulence factor arginine deiminase (ADI), and trigger factor (TF)-TLR2 conjugates was produced. This combination was assessed for immunity in mice and compared with mixtures of the four antigens with FSL-1 or alum. High titer antigen-specific IgG antibodies were detected from all vaccine groups, with antibodies elicited from FSL-1 conjugates around 10-fold higher compared to the FSL-1 mixture group. Furthermore, the FSL-1 conjugates afforded a more balanced T_H1/T_H2 immune response than the alum-adjuvanted group, suggesting that this combination vaccine represents a promising candidate for the prevention of GAS diseases. Thus, we established a conjugation platform that allows for the production of defined, site-specific antigen-adjuvant conjugates, which maintain the native three-dimensional structure of antigens and can be potentially applied to a variety of protein antigens.

Role of Lipopolysaccharide in Protecting OmpT from Autoproteolysis during In Vitro Refolding

Outer membrane protease (OmpT) is a 33.5 kDa aspartyl protease that cleaves at dibasic sites and is thought to function as a defense mechanism for E. coli against cationic antimicrobial peptides secreted by the host immune system. Despite carrying three dibasic sites in its own sequence, there is no report of OmpT autoproteolysis in vivo. However, recombinant OmpT expressed in vitro as inclusion bodies has been reported to undergo autoproteolysis during the refolding step, thus resulting in an inactive protease. In this study, we monitor and compare levels of in vitro autoproteolysis of folded and unfolded OmpT and examine the role of lipopolysaccharide (LPS) in autoproteolysis. SDS-PAGE data indicate that it is only the unfolded OmpT that undergoes autoproteolysis while the folded OmpT remains protected and resistant to autoproteolysis. This selective susceptibility to autoproteolysis is intriguing. Previous studies suggest that LPS, a co-factor necessary for OmpT activity, may play a protective role in preventing autoproteolysis. However, data presented here confirm that LPS plays no such protective role in the case of unfolded OmpT. Furthermore, OmpT mutants designed to prevent LPS from binding to its putative LPS-binding motif still exhibited excellent protease activity, suggesting that the putative LPS-binding motif is of less importance for OmpT's activity than previously proposed.

Current technologies to endotoxin detection and removal for biopharmaceutical purification

Endotoxins are the major contributors to the pyrogenic response caused by contaminated pharmaceutical products, formulation ingredients, and medical devices. Recombinant biopharmaceutical products are manufactured using living organisms, including Gram-negative bacteria. Upon the death of a Gram-negative bacterium, endotoxins (also known as lipopolysaccharides) in the outer cell membrane are released into the lysate where they can interact with and form bonds with biomolecules, including target therapeutic compounds. Endotoxin contamination of biologic products may also occur through water, raw materials such as excipients, media, additives, sera, equipment, containers closure systems, and expression systems used in manufacturing. The manufacturing process is, therefore, in critical need of methods to reduce and remove endotoxins by monitoring raw materials and in-process intermediates at critical steps, in addition to final drug product release testing. This review paper highlights a discussion on three major topics about endotoxin detection techniques, upstream processes for the production of therapeutic molecules, and downstream processes to eliminate endotoxins during product purification. Finally, we have evaluated the effectiveness of endotoxin removal processes from a perspective of high purity and low cost.

Determination of the Structural Integrity and Stability of Polysialic Acid during Alkaline and Thermal Treatment

Polysialic acid (polySia) is a linear homopolymer of varying chain lengths that exists mostly on the outer cell membrane surface of certain bacteria, such as Escherichia coli (E. coli) K1. PolySia, with an average degree of polymerization of 20 (polySia avDP20), possesses material properties that can be used for therapeutic applications to treat inflammatory neurodegenerative diseases. The fermentation of E. coli K1 enables the large-scale production of endogenous long-chain polySia (DP ≈ 130) (LC polySia), from which polySia avDP20 can be manufactured using thermal hydrolysis. To ensure adequate biopharmaceutical quality of the product, the removal of byproducts and contaminants, such as endotoxins, is essential. Recent studies have revealed that the long-term incubation in alkaline sodium hydroxide (NaOH) solutions reduces the endotoxin content down to 3 EU (endotoxin units) per mg, which is in the range of pharmaceutical applications. In this study, we analyzed interferences in the intramolecular structure of polySia caused by harsh NaOH treatment or thermal hydrolysis. Nuclear magnetic resonance (NMR) spectroscopy revealed that neither the incubation in an alkaline solution nor the thermal hydrolysis induced any chemical modification. In addition, HPLC analysis with a preceding 1,2-diamino-4,5-methylenedioxybenzene (DMB) derivatization demonstrated that the alkaline treatment did not induce any hydrolytic effects to reduce the maximum polymer length and that the controlled thermal hydrolysis reduced the maximum chain length effectively, while cost-effective incubation in alkaline solutions had no adverse effects on LC polySia. Therefore, both methods guarantee the production of high-purity, low-molecular-weight polySia without alterations in the structure, which is a prerequisite for the submission of a marketing authorization application as a medicinal product. However, a specific synthesis of low-molecular-weight polySia with defined chain lengths is only possible to a limited extent.

Regenerative Core-Shell Nanoparticles for Simultaneous Removal and Detection of Endotoxins

Detection and removal of lipopolysaccharides (LPS) from food and pharmaceutical preparations is important for their safe intake and administration to avoid septic shock. We have developed an abiotic system for reversible capture, removal, and detection of LPS in aqueous solutions. Our system comprises long C18 acyl chains tethered to Fe₃O₄/Au/Fe₃O₄ nanoflowers (NFs) that act as solid supports during the separation process. The reversible LPS binding is mediated by facile hydrophobic interactions between the C18 chains and the bioactive lipid A component present on the LPS molecule. Various parameters such as pH, solvent, sonication time, NF concentration, alkane chain length, and density are optimized to achieve a maximum LPS capture efficiency. The NFs can be reused at least three times by simply breaking the NF-LPS complexes in the presence of food-grade surfactants, making the entire process safe, efficient, and scalable. The regenerated particles also serve as colorimetric labels in dot blot bioassays for simple and rapid estimation of the LPS removed.

Size Exclusion Chromatography Method for Purification of Nicotinamide Mononucleotide (NMN) from Bacterial Cells

Over 12% of the world's health resources are spent on treating diabetes, as high blood glucose is the third cause of mortality worldwide. Insulin resistance is the basis of the most common form of diabetes: type 2 diabetes. Recent animal studies report successful attempts at reversing type 2 diabetes by the administering of the NAD+ precursor nicotinamide mononucleotide (NMN). However, the current high price of this molecule urges for more efficient and cost-effective production methods. This work proposes a method for purifying NMN by Size Exclusion Chromatography (SEC) on silica with a covalently attached coating of poly(2-hydroxyethyl aspartamide) (PolyHEA) stationary phase using an isocratic elution with a denaturing mobile phase (50 mM formic acid) from a complex molecular mixture such as a fermentation broth. The eluted peaks were identified by UV-Vis analysis and confirmed with ESI+ mass spectrometry and a HPLC reversed-phase method. The proposed SEC method is simple, patent-free, directly applicable for industrial production with a minimum scale up effort. The need for multiple chromatographic steps is eliminated and the lysate filtration and clarification steps are simplified. Substantial reduction in NMN production costs and increased purity of NMN to the level suitable for usage in humans are expected.

Fibroblast growth factor 1 ameliorates diabetic nephropathy by an anti-inflammatory mechanism

Inflammation plays a central role in the etiology of diabetic nephropathy, a global health issue. We observed a significant reduction in the renal expression of fibroblast growth factor 1, a known mitogen and insulin sensitizer, in patients with diabetic nephropathy and in mouse models implying that fibroblast growth factor 1 possesses beneficial anti-inflammatory and renoprotective activities in vivo. To test this possibility, we investigated the effects of chronic intraperitoneal administration of fibroblast growth factor 1 into both the streptozotocin-induced type 1 diabetes and db/db type 2 diabetes models. Indeed, recombinant fibroblast growth factor 1 significantly suppressed renal inflammation (i.e., cytokines, macrophage infiltration), glomerular and tubular damage, and renal dysfunction in both type 1 and type 2 diabetes mice. Fibroblast growth factor 1 was able to correct the elevated blood glucose levels in type 2 but not in type 1 diabetic mice, suggesting that the anti-inflammatory effect of fibroblast growth factor 1 was independent of its glucose-lowering activity. The mechanistic study demonstrated that fibroblast growth factor 1-mediated inhibition of the renal inflammation in vivo was accompanied by attenuation of the nuclear factor κB and c-Jun N-terminal kinase signaling pathways, further validated in vitro using cultured glomerular mesangial cells and podocytes. Thus, fibroblast growth factor 1 holds great promise for developing new treatments for diabetic nephropathy through countering inflammatory signaling cascades in injured renal tissue.

Phospholipid imprinted polymers as selective endotoxin scavengers

Herein we explore phospholipid imprinting as a means to design receptors for complex glycolipids comprising the toxic lipopolysaccharide endotoxin. A series of polymerizable bis-imidazolium and urea hosts were evaluated as cationic and neutral hosts for phosphates and phosphonates, the latter used as mimics of the phospholipid head groups. The bis-imidazolium hosts interacted with the guests in a cooperative manner leading to the presence of tight and well defined 1:2 ternary complexes. Optimized monomer combinations were subsequently used for imprinting of phosphatidic acid as an endotoxin dummy template. Presence of the aforementioned ternary complexes during polymerization resulted in imprinting of lipid dimers - the latter believed to crudely mimic the endotoxin Lipid A motif. The polymers were characterized with respect to template rebinding, binding affinity, capacity and common structural properties, leading to the identification of polymers which were thereafter subjected to an industrially validated endotoxin removal test. Two of the polymers were capable of removing endotoxin down to levels well below the accepted threshold (0.005 EU/mg API) in pharmaceutical production.

Endotoxin Entrapment on Glass via C-18 Self-Assembled Monolayers and Rapid Detection Using Drug-Nanoparticle Bioconjugate Probes

Bloodstream bacterial infections are known to illicit a systemic immune response that can lead to multiorgan failure and septic shock. The current endotoxin identification techniques in serum are expensive and elaborate requiring bulky benchtop instrumentation. We demonstrate a new route for endotoxin detection in which lipopolysaccharides (LPS) in solution are entrapped using C-18 silane-functionalized glass slides and tagged with polymyxin B sulfate (PMB) drug-conjugated gold nanoparticles. The signal from the particles is further amplified via the silver reduction approach to yield concentration-dependent colorimetric spots visible to the bare eye. The method is rapid, reliable, and cost-effective and fulfills an urgent unmet need in the healthcare industry for early septicemia diagnosis.

Endotoxin detection in full blood plasma in a theranostic approach to combat sepsis

A qualitative piezoelectric biosensor assay alternative for the detection of bacterial endotoxin is described to perform measurements in full human blood plasma in a real-time and label-free advanced fashion.