The Role of Microalgae in Renewable Energy Production: Challenges and Opportunities

Effect of culture hydrodynamics on Arthrospira platensis production using a single-use photobioreactor system through a CFD supported approach

Laboratory scale conventional single-use bioreactor was used to investigate the effect of different stirrer speeds on the Arthrospira platensis (Spirulina platensis) culture. Experiments were handled in two steps. First step was the selection of the stirring speeds, which was simulated via using CFD, and the second was the long term cultivation with the selected speed. During 10 days of batches as the first step, under identical culture conditions, stirrer speed of 230 rpm gave higher results, compared to 130 and 70 rpm, with respect to dry biomass weight, absorbance value (AB) and chlorophyll-a concentration. Volumetric productivity during the growth phase of the cultures were calculated as 0.39 ± 0.03, 0.28 ± 0.01, and 0.19 ± 0.02 g L-1 d-1, from the fast to the slower speeds. According to the results a 17 day batch was handled with 230 rpm in order to monitor the effects on the culture. The culture reached a volumetric productivity of 0.33 ± 0.04 g L-1 d-1. Statistical analysis showed the significance of the parameters related with the stirring speed.

Nutrient Removal and Membrane Performance of an Algae Membrane Photobioreactor in Urban Wastewater Regeneration

The increase in industry and population, together with the need for wastewater reuse, makes it necessary to implement new technologies in the circular economy framework. The aim of this research was to evaluate the quality of the effluent of an algae membrane photobioreactor for the treatment of the effluent of an urban wastewater treatment plant, to characterise the ultrafiltration membranes, to study the effectiveness of a proposed cleaning protocol, and to analyse the performance of the photobioreactor. The photobioreactor operated under two days of hydraulic retention times feed with the effluent from the Los Vados wastewater treatment plant (WWTP) (Granada, Spain). The microalgae community in the photobioreactor grew according to the pseudo-second-order model. The effluent obtained could be reused for different uses of diverse quality with the removal of total nitrogen and phosphorus of 56.3% and 64.27%, respectively. The fouling of the polyvinylidene difluoride ultrafiltration membrane after 80 days of operation was slight, increasing the total membrane resistance by approximately 22%. Moreover, the higher temperature of the medium was, the lower intrinsic resistance of the membrane. A total of 100% recovery of the membrane was obtained in the two-phase cleaning protocol, with 42% and 58%, respectively.

Phytoplankton dynamics and renewable energy potential induced by the environmental conditions of Lake Burullus, Egypt

The research evaluates the spatio-temporal phytoplankton community structure and abundance along with the pollution sources and the lake bioenergy potential, primarily in order to better understand the interplay of the environmental factors affecting them in inland coastal waters. Burullus Lake, located in the north of the Nile Delta of Egypt, is selected as a case study area. Field investigations along with sampling of lake water from 55 sites in the period 20-25 September 2020 are performed. The physicochemical analysis is carried out for the lake water bathymetry, temperature (T°C), pH, salinities (total dissolved solids (TDS) and electric conductivity), and nutrient contents (nitrate, nitrite, ammonia, and phosphate). Phytoplankton identification and biological analysis are used to document the taxa and abundance along with their contents of chlorophyll-a, protein, carbohydrates, and lipids. Then, the trophic index (TRIX), along with the total phytoplankton biomass and the energy potentials, is estimated. Statistical analyses were appraised for the univariate summary statistics, correlation analysis, regression analysis, multivariate statistical analysis including principal component analysis (PCA), and clustering techniques (both geographic position and the k-means clustering) which were conducted using the PAST 4.03 package. The geostatistical modeling of the ordinary kriging implemented in the ArcGIS 9.3 package was appraised for mapping the studied parameters. Results clarified ranges with wide variations for the water depth of 0.90-2 m (av. 130.5 cm), T°C of 26.6-30.20°C (av. 28.3 °C), alkaline pH of 7.78-8.92 (av. 8.6), and TDS of 0.3-17.09 (av. 4.33) gm/l. Ranges of nutrients (mg/l) are also widely varied with nitrates of 0.44-8.36 (av. 3.5), nitrites of 0.004-7.45 (av. 0.4), ammonia range of 0.03-8.54 (av. 1.4), and phosphate of 0.1-4.9 (av. 0.9). A much-diversified phytoplankton community showed maximum counts of 1005 × 10³ units.l^-1 to a minimum of 340 × 10³ units.l^-1 for a total of 145 taxa from 61 genera and six classes typically of freshwater forms. The largest biomass (3.06 × 10^-3 kg/m³) and energy potential (19.87 × 10^-3 kWh/kg) marked the downstream area of the Brimbal Canal, followed by the area located in front of the eastern Burullus and El-Gharbiya drains, which exhibited 2.76 × 10^-3 kg/m³ and 17.96 × 10^-3 kWh/kg, for the biomass and the energy potential, respectively. Geographic position and k-means clustering techniques distinguished three homogenous classes of marked intra-class variations. PCA analysis distinguished three principal components summed for about 95% of the variations. Intense environmental pollution at the drain downstream areas is indicated by many fish mortality occurrences that were related to the blooms of the toxic Microcystis aeruginosa among the cyanophyte species, and also due to the dominance of the Euglena spp. and Phacus spp. of the Euglenophyceae, which assimilate lots of organic matters in these areas. Lake water movement in the form of turbulent flows and mixing regimes is affected by wind direction and the amount of flows from the sea drains. The estuarine Nile canal has a great effect on the water's physicochemical properties, particularly the nutrient loads, inducing the phytoplankton composition and abundance, total biomass, and the biological contents hence the energy potential. Nutrient load from discharged water from drains was a major contributor to raising the total algae counts and their corresponding contents of the carbohydrates, lipids, proteins, and the chlorophyll-a, which arranged in decreasing order of influence. Phytoplankton dynamics are mostly linked to climatic, hydrologic fluctuation of the drain water flows, and hence, the associated nutrient load discharged from land use changes to fish farms and the related agricultural practices south of the lake. The adopted integrated analyses proved promising, which confirmed the combined effects of environmental factors on lake pollution and the bioenergy potentials.

Isolation of Industrial Important Bioactive Compounds from Microalgae

Microalgae are known as a rich source of bioactive compounds which exhibit different biological activities. Increased demand for sustainable biomass for production of important bioactive components with various potential especially therapeutic applications has resulted in noticeable interest in algae. Utilisation of microalgae in multiple scopes has been growing in various industries ranging from harnessing renewable energy to exploitation of high-value products. The focuses of this review are on production and the use of value-added components obtained from microalgae with current and potential application in the pharmaceutical, nutraceutical, cosmeceutical, energy and agri-food industries, as well as for bioremediation. Moreover, this work discusses the advantage, potential new beneficial strains, applications, limitations, research gaps and future prospect of microalgae in industry.

The Potential of Chaetoceros muelleri in Bioremediation of Antibiotics: Performance and Optimization

Antibiotics are frequently applied to treat bacterial infections in humans and animals. However, most consumed antibiotics are excreted into wastewater as metabolites or in their original form. Therefore, removal of antibiotics from aquatic environments is of high research interest. In this study, we investigated the removal of sulfamethoxazole (SMX) and ofloxacin (OFX) with Chaetoceros muelleri, a marine diatom. The optimization process was conducted using response surface methodology (RSM) with two independent parameters, i.e., the initial concentration of antibiotics and contact time. The optimum removal of SMX and OFX were 39.8% (0.19 mg L⁻¹) and 42.5% (0.21 mg L⁻¹) at the initial concentration (0.5 mg L⁻¹) and contact time (6.3 days). Apart from that, the toxicity effect of antibiotics on the diatom was monitored in different SMX and OFX concentrations (0 to 50 mg L⁻¹). The protein (mg L⁻¹) and carotenoid (μg L⁻¹) content increased when the antibiotic concentration increased up to 20 mg L⁻¹, while cell viability was not significantly affected up to 20 mg L⁻¹ of antibiotic concentration. Protein content, carotenoid, and cell viability decreased during high antibiotic concentrations (more than 20 to 30 mg L⁻¹). This study revealed that the use of Chaetoceros muelleri is an appealing solution to remove certain antibiotics from wastewater.

Algae: Biomass to Biofuel

Worldwide demand for ethanol alternative fuel has been emerging day by day owing to the rapid population growth and industrialization. Culturing microalgae as an alternative feedstock is anticipated to be a potentially significant approach for sustainable bioethanol biofuel production. Microalgae are abundant in nature, which grow at faster rates with a capability of storing high lipid and starch/cellulose contents inside their cells. This process offers several environmental advantages, including the effective utilization of land, good CO2 sequestration without entering into "food against fuel" dispute. This chapter focuses on the methods and processes used for the production of bioethanol biofuels from algae. Thus, it also covers significant achievements in the research and developments on algae bioethanol production, mainly including pretreatment, hydrolysis, and fermentation of algae biomass. The processes of producing biodiesel, biogas, and hydrogen have also been discussed.