Doped magnetic nanoparticles: From synthesis to applied technological frontiers

Doped magnetic nanoparticles (DMNPs) have become a fascinating class of nanomaterials with important implications in science and technology. The comprehensive review focuses on the synthetic methods, types of doping elements, distinctive properties, and extensive applications of DMNPs. The synthesis section highlights different methods, highlighting their benefits and drawbacks, such as chemical precipitation, co-precipitation, thermal breakdown, sol-gel, and other processes. Strategies for increasing the stability and functioning of DMNP are also reviewed, including surface functionalization and ligand exchange. An in-depth study is done to clarify how doping materials including transition metals, non-metals, and rare earth elements affect the chemical stability and magnetic characteristics of DMNP. Applications in various fields, such as biomedicine (MRI contrast agents, medication transport, antibacterial activity), environmental remediation (water purification, heavy metal removal), and sensing technologies, heavily rely on these features. DMNPs offer much potential in a variety of disciplines. Still, there are several challenges to their adoption, including regulatory and safety concerns, cost-effectiveness issues, and scalability issues. More research is required to overcome these difficulties and maximize the use of MDNPs for ensuring food safety.

A systematic review of photocatalytic degradation of humic acid in aqueous solution using nanoparticles

OBJECTIVES

Humic acid (HA) compounds in the disinfection processes of drinking water and wastewater are considered as precursors of highly toxic, carcinogenic and mutagenic disinfectant by-products. The aim of this study was to systematically review all research studies on the photocatalytic degradation of humic acid and to evaluate the laboratory conditions and results of these studies.

CONTENT

The present systematic review was performed by searching the Scopus, PubMed, and web of science databases until December 2021. The parameters of type of catalyst, catalyst size, optimum pH, optimum initial concentration of humic Acid, optimum catalyst concentration, optimum time, light used and removal efficiency were investigated.

SUMMARY

395 studies were screened and using the inclusion and exclusion criteria, in total, 20 studies met our inclusion criteria and provided the information necessary to Photocatalytic degradation of humic acid by nanoparticles. In the investigated studies, the percentage of photocatalytic degradation of humic acid by nanoparticles was reported to be above 70%, and in some studies, the removal efficiency had reached 100%.

OUTLOOK

From the results of this systematic review, it was concluded that the photocatalytic process using nanoparticles has a high effect on the degradation of humic acid.

A comprehensive appraisal on status and management of remediation of DBPs by TiO2 based-photocatalysts: Insights of technology, performance and energy efficiency

Disinfection has been acknowledged as an inevitable technique in water treatment. However, an inadvertent consequence of generation of carcinogenic and mutagenic disinfection byproducts (DBPs) is associated with the reaction of disinfectants and natural organic matter (NOM) present in water. More than 700 DBPs have been identified in drinking water. The conventional processes carried out in WTPs do not optimally ensure NOM elimination, which evokes the need for the incorporation of other processes. In this context, several physicochemical and advanced oxidation processes (AOP), such as adsorption, membrane techniques, photocatalysis, etc., have been studied for the removal of NOM from water. Photocatalysis using semiconductors has been one of the most proficient technologies, which utilizes light energy for the degradation of recalcitrant organics. The present study aims to provide a comprehensive appraisal on the performance of titanium dioxide (TiO₂) based photocatalysts in the remediation of DBPs concerning the efficacy and energy requirements of the system. Furthermore, the effect of process parameters, such as pH, catalyst dose, light intensity, etc. on the efficacy of the process was also studied. It was observed that conventional P25-TiO₂ powders were efficient in the degradation of dissolved organic carbon (DOC) (up to 90%). However, low photocatalytic activity under visible light activation is one of its significant downsides. Several modifications on the catalyst surface in many studies exhibited advantages, such as high humic acid (HA) degradation under visible light. Furthermore, doped TiO₂ catalysts have shown high total organic carbon (TOC) degradation. The photocatalytic systems have achieved a better decrease in trihalomethane formation potential (THMFP) when compared to haloacetic acid formation potential (HAAFP). The energy requirements of the photocatalytic systems are determined by electrical energy per order (EE/O), which has been observed to be lesser for doped TiO₂ and engineered TiO₂ catalysts when compared with P25-TiO₂ powders. Carbon, iron, silver, etc., based catalysts can be a promising alternative to TiO₂-based photocatalysts for the degradation of NOM, although further research is required in this direction. The present review provides critical highlights on the uses, opportunities, and challenges of TiO₂-based photocatalytic techniques for the management of DBPs and their precursors pertaining to an emerging area of water treatment.

Biosynthesis of MnFe2O4@TiO2 magnetic nanocomposite using oleaster tree bark for efficient photocatalytic degradation of humic acid in aqueous solutions

The presence of humic acid compounds in water resources, as one of the precursors of Trihalomethanes and Holoacetic acids, causes health problems for many communities. The aim of this research study was to investigate the photocatalytic degradation efficiency of humic acid using MnFe₂O₄@TiO₂ nanoparticles which produced by green synthesis method. The synthesis of metal nanoparticles using plant extracts and the study of their catalytic performance is a relatively new topic. Many chemical techniques have been proposed for the synthesis of MnFe₂O₄@TiO₂ nanoparticles, but green synthesis has received much attention due to its availability, simplicity, and non-toxicity. The properties of synthesized nanoparticles were determined by SEM, FT-IR, XRD, EDS, and DLS analysis. The results of the study showed that under optimal experimental conditions (pH = 3, nanocomposite dose = 0.03 g/L, humic acid initial concentration = 2 mg/L, and contact time = 20 min), it is possible to achieve maximum degradation of humic acid. Therefore; MnFe₂O₄@TiO₂ nanoparticles have high efficiency for removing of humic acid from aqueous solutions under UV light.

Evaluation of Sonocatalytic and Photocatalytic Processes Efficiency for Degradation of Humic Compounds Using Synthesized Transition-Metal-Doped ZnO Nanoparticles in Aqueous Solution

The existence of a humic substance in water causes the growth of microorganisms and reduces the quality of water; therefore, the removal of these materials is crucial. Here, the ZnO nanoparticles doped using transition metals, copper (Cu) and manganese (Mn), were used as an effective catalyst for photocatalytic removal of humic substances in an aqueous environment under ultraviolet, visible light, and light-emitting diode irradiations. Also, we study the effect of the sonocatalytic method. A solvothermal procedure is used for doping, and the Cu- and Mn-doped ZnO nanocatalyst were characterized by means of FTIR, XRD, AFM, SEM, and EDAX analyses. We investigate the effect of operational variables, including doping ratio, initial pH, catalyst dose, initial HS content, and illuminance on the removal efficiency of the processes. The findings of the analyses used for the characterization of the nanoparticles illustrate the appropriate synthesis of the Cu- and Mn-doped ZnO nanocatalysts. We observe the highest removal efficiency rate under acidic conditions and the process efficiency decreased with increasing solution pH, when we tested it in the range of 3–7. Photocatalytic decomposition of HS increases with a rise in catalyst dose, but an increase in initial HS content results in decreasing the removal efficiency. We observe the highest photocatalytic degradation of humic acid while using the visible light, and the highest removal efficiency is obtained using Cu.ZnO. The Cu.ZnO also shows better performance under ultraviolet irradiation compared to other agents.