Noninvasive characterization of the effect of varying PLGA molecular weight blends on in situ forming implant behavior using ultrasound imaging

Mechanistic Computational Modeling of Implantable, Bioresorbable Drug Release Systems

Implantable, bioresorbable drug delivery systems offer an alternative to current drug administration techniques; allowing for patient-tailored drug dosage, while also increasing patient compliance. Mechanistic mathematical modeling allows for the acceleration of the design of the release systems, and for prediction of physical anomalies that are not intuitive and may otherwise elude discovery. This study investigates short-term drug release as a function of water-mediated polymer phase inversion into a solid depot within hours to days, as well as long-term hydrolysis-mediated degradation and erosion of the implant over the next few weeks. Finite difference methods are used to model spatial and temporal changes in polymer phase inversion, solidification, and hydrolysis. Modeling reveals the impact of non-uniform drug distribution, production and transport of H+ ions, and localized polymer degradation on the diffusion of water, drug, and hydrolyzed polymer byproducts. Compared to experimental data, the computational model accurately predicts the drug release during the solidification of implants over days and drug release profiles over weeks from microspheres and implants. This work offers new insight into the impact of various parameters on drug release profiles, and is a new tool to accelerate the design process for release systems to meet a patient specific clinical need.

Sustained degradation of hyaluronic acid using an in situ forming implant

In pancreatic cancer, excessive hyaluronic acid (HA) in the tumor microenvironment creates a viscous stroma, which reduces systemic drug transport into the tumor and correlates with poor patient prognosis. HA can be degraded through both enzymatic and nonenzymatic methods to improve mass transport properties. Here, we use an in situ forming implant to provide sustained degradation of HA directly at a local, targeted site. We formulated and characterized an implant capable of sustained release of hyaluronidase (HAase) using 15 kDa poly(lactic-co-glycolic) acid and bovine testicular HAase. The implant releases bioactive HAase to degrade the HA through enzymatic hydrolysis at early timepoints. In the first 24 h, 17.9% of the HAase is released, which can reduce the viscosity of a 10 mg/mL HA solution by 94.1% and deplete the HA content within primary human pancreatic tumor samples and ex vivo murine tumors. At later timepoints, as lower quantities of HAase are released (51.4% released in total over 21 d), the degradation of HA is supplemented by the acidic by-products that accumulate as a result of implant degradation. Acidic conditions degrade HA through nonenzymatic methods. This formulation has potential as an intratumoral injection to allow sustained degradation of HA at the pancreatic tumor site.

A Three-in-One Strategy: Injectable Biomimetic Porous Hydrogels for Accelerating Bone Regeneration via Shape-Adaptable Scaffolds, Controllable Magnesium Ion Release, and Enhanced Osteogenic Differentiation

The repair of bone defects with irregular shapes, particularly in a minimally invasive manner, remains a major challenge. For synthetic bone grafts, injectable hydrogels are superior to conventional scaffolds because they can adapt satisfactorily to the defect margins and can be injected into deeper areas of injury via a minimally invasive procedure. Based on the poly(lactide-co-glycolide)(PLGA)/1-methyl-2-pyrrolidinone solution reported in our previous study, we successfully synthesized injectable MgO/MgCO₃@PLGA (PMM) hydrogels, namely, injectable biomimetic porous hydrogels (IBPHs), to accelerate bone regeneration. In addition to exhibiting excellent injectability, PMM hydrogels could transform into porous scaffolds in situ through a liquid-to-solid phase transition and completely fill irregular bone defects via their superb shape adaptability. Moreover, sustainable and steady release of Mg²⁺ was achieved by regulating the weight ratio of the incorporated MgO and MgCO₃ particles. Via controlled release of Mg²⁺, PMM hydrogels significantly promoted proliferation, osteogenic differentiation, migration, and biomineral deposition of immortalized mouse embryonic fibroblasts. More importantly, micro-CT imaging and histological analysis indicated that concomitant with their gradual degradation, PMM hydrogels effectively stimulated in situ bone regeneration in rat calvarial defects with an increase in the bone volume fraction of almost 2-fold compared with that in the control group. These findings suggest that injectable PMM hydrogels can satisfactorily match bone defects and form porous scaffolds in situ and can significantly promote bone regeneration via controllable Mg²⁺ release. The remarkable features of IPBHs may open a new avenue for the exploration of in situ repair systems for irregular bone defects to accelerate bone regeneration and have great potential for clinical translation.

Biodegradable polymeric solid implants for ultra-long-acting delivery of single or multiple antiretroviral drugs

Lack of adherence is a key barrier to a successful human immunodeficiency virus (HIV) treatment and prevention. We report on an ultra-long-acting (ULA) biodegradable polymeric solid implant (PSI) that can accommodate one or more antiretrovirals (e.g., dolutegravir (DTG) and rilpivirine (RPV)) at translatable human doses (65% wt.) in a single implant. PSIs are fabricated using a three-step process: (a) phase inversion of a drug/polymer solution to form an initial in-situ forming solid implant, (b) micronization of dried drug-loaded solid implants, and (c) compression of the micronized drug-loaded solid powder to generate the PSI. DTG and RPV can be pre-combined in a single PLGA-based solution to make dual-drug PSI; or formulated individually in PLGA-based solutions to generate separate micronized powders and form a bilayer dual-drug PSI. Results showed that in a single or bilayer dual-drug PSI, DTG and RPV exhibited physicochemical properties similar to their pure drug analogues. PSIs were well tolerated in vivo and effectively delivered drug(s) over 180 days with concentrations above 4× PA-IC90 after a single subcutaneous administration. While biodegradable and do not require removal, these PSIs can safely be removed to terminate the treatment if required. The versatility of this technology makes it attractive as an ULA drug delivery platform for HIV and various therapeutic applications.

An overview of PLGA in-situ forming implants based on solvent exchange technique: effect of formulation components and characterization

As a result of the low oral bioavailability of several drugs, there is a renewed interest for parenteral administration to target their absorption directly into the blood bypassing the long gastrointestinal route and hepatic metabolism. In order to address the potential side effects of frequent injections, sustained release systems are the most popular approaches for achieving controlled long-acting drug delivery. Injectable in-situ forming implants (ISFIs) have gained greater popularity in comparison to other sustained systems. Their significant positive aspects are attributed to easier production, acceptable administration route, reduced dosing frequency and patient compliance achievement. ISFI systems, comprising biodegradable polymers such as poly (lactide-co-glycolide) (PLGA) based on solvent exchange mechanisms, are emerged as liquid formulations that develop solid or semisolid depots after injection and deliver drugs over extended periods. The drug release from ISFI systems is generally characterized by an initial burst during the matrix solidification, followed by diffusion processes and finally polymeric degradation and erosion. The choice of suitable solvent with satisfactory viscosity, miscibility and biocompatibility along with considerable PLGA hydrophobicity and molecular weights is fundamental for optimizing the drug release. This overview gives a particular emphasis on evaluations and the wide ranges of requirements needed to achieve reasonable physicochemical characteristics of ISFIs.

Effects of Polymer Blending on the Performance of a Subcutaneous Biodegradable Implant for HIV Pre-Exposure Prophylaxis (PrEP)

Long-acting (LA) HIV pre-exposure prophylaxis (PrEP) can mitigate challenges of adhering to daily or on-demand regimens of antiretrovirals (ARVs). We are developing a subcutaneous implant comprising polycaprolactone (PCL) for sustained delivery of ARVs for PrEP. Here we use tenofovir alafenamide (TAF) as a model drug. Previously, we demonstrated that the release rates of drugs are controlled by the implant surface area and wall thickness, and the molecular weight (MW) of PCL. Here, we further advance the implant design and tailor the release rates of TAF and the mechanical integrity of the implant through unique polymer blend formulations. In vitro release of TAF from the implant exhibited zero-order release kinetics for ~120 days. TAF release rates were readily controlled via the MW of the polymer blend, with PCL formulations of higher MW releasing the drug faster than implants with lower MW PCL. Use of polymer MW to tune drug release rates is partly explained by PCL crystallinity, as higher PCL crystalline material is often associated with a slower release rate. Moreover, results showed the ability to tailor mechanical properties via PCL blends. Blending PCL offers an effective approach for tuning the ARV release rates, implant duration, and integrity, and ultimately the biodegradation profiles of the implant.

Novel biodegradable Round Window Disks for inner ear delivery of dexamethasone

Drug delivery to the inner ear is an important and very challenging field. The cochlea is protected by several barriers that need to be overcome in the drug delivery process. Local drug delivery can avoid undesirable side effects arising from systemic drug delivery. We developed a biodegradable dexamethasone-loaded Round Window (RW) Disk based on poly(D,L-lactic-co-glycolic acid) (PLGA) for local drug therapy to the inner ear by RW membrane administration by a film-casting method. The optimal drying time was characterized by thermogravimetric analysis and differential scanning calorimetry. In addition, the mass and polymer degradation over time of drug release was measured in vitro showing a total mass loss of 70% after 3 weeks. Dexamethasone release was determined by a RW model setup using a polyethylene terephthalate membrane. We achieved a controlled release over 52 days. Ex vivo implantation of a RW Disk onto a guinea pig RW membrane indicated well-fitting properties of the drug delivery device leading to a close surface contact with the membrane and the successful proof of concept. The developed RW Disks could be new and promising drug delivery device to achieve effective local drug delivery to the inner ear for an extended time.

In situ Formed Implants, Based on PLGA and Eudragit Blends, for Novel Florfenicol Controlled Release Formulations

Drug controlled release technologies (DCRTs) represent an opportunity for designing new therapies. Main objectives are dose number optimization and secondary effects reduction to improve the level of patient/client acceptance. The present work studies DCRTs based in blended polymeric implants for single dose and long-term therapies of florfenicol (FF), a broad spectrum antibiotic. Polymers used were PLGA and Eudragit E100/S100 types. Eudragit/PLGA and FF/PLGA ratios were the main studied factors in terms of encapsulation efficiencies (EEs) and drug release profiles. In addition, morphological and physicochemical characterization were carried out. EEs were of 50-100% depending on formulation composition, and the FF releasing rate was increased or diminished when E100 or S100 were added, respectively. PLGA hydrolytic cleavage products possibly affect Eudragit solubility and matrix stability. Different mathematical models were used for better understanding and simulating release processes. Implants maintained the antimicrobial activity against Pseudomonas aeruginosa up to 12 days on agar plates. The developed DCRTs represents a suitable alternative for florfenicol long-term therapies.

Phenomenology of the Initial Burst Release of Drugs from PLGA Microparticles

Poly(lactic-co-glycolic acid) (PLGA) is the most prevalent polymer drug delivery vehicle in use today. There are about 20 commercialized drug products in which PLGA is used as an excipient. In more than half of these formulations, PLGA is used in the form of microparticles (with sizes in the range between 60 nm and 100 μm). The primary role of PLGA is to control the kinetics of drug release toward achieving sustained release of the drug. Unfortunately, most drug-loaded PLGA microparticles exhibit a common drawback: an initial uncontrolled burst of the drug. After 30 years of utilization of PLGA in controlled drug delivery systems, this initial burst drug release still remains an unresolved challenge. In this Review, we present a summary of the proposed mechanisms responsible for this phenomenon and the known factors affecting the burst release process. Also, we discuss examples of recent efforts made to reduce the initial burst release of the drug from PLGA particles.

In situ forming implants exposed to ultrasound enhance therapeutic efficacy in subcutaneous murine tumors

In situ forming implants (ISFIs) allow for a high initial intratumoral concentration and sustained release of the chemotherapeutic. However, clinical translation is impeded primarily due to limited drug penetration from the tumor/boundary interface and poor intratumoral drug retention. Therapeutic ultrasound (TUS) has become a popular approach for improving drug penetration of transdermal devices and increasing cellular uptake of nanoparticles. These effects are driven by the mechanical and thermal bioeffects associated with TUS. In this study, we characterize the released drug penetration, retention, and overall therapeutic response when exposing ISFI to the combination of the mechanical and thermal effects of TUS (C-TUS). ISFIs were intratumorally injected into subcutaneous murine tumors then exposed to C-TUS (exposure: 5 min, duty factor: 0.33, frequency: 3 MHz, intensity: 2.2 W/cm2, pulse duration: 2 ms, pulse repetition frequency: 165 Hz, effective radiating area: 5 cm2, energy delivered: 896 J, time average intensity: 0.88 W/cm2). Tumors treated with the combination of ISFI + C-TUS demonstrated a 2.5-fold increase in maximum drug penetration and a 3-fold increase in drug retention at 5- and 8-days post-injection, respectively, compared to ISFIs without TUS exposure. These improvements in drug penetration and retention translated into an enhanced therapeutic response. Mice treated with ISFI + C-TUS showed a 62.6% reduction in tumor progression, a 50.0% increase in median survival time, and a 26.6% increase in necrotic percentage compared to ISFIs without TUS exposure. Combining intratumoral ISFIs with TUS may be beneficial for addressing some long-standing challenges with local drug delivery in cancer treatment and may serve as a viable noninvasive method to improve the poor clinical success of local drug delivery systems.

Improving Treatment Efficacy of In Situ Forming Implants via Concurrent Delivery of Chemotherapeutic and Chemosensitizer

P-glycoprotein (Pgp), a member of the ATP-binding cassette family, is one of the major causes of multidrug resistance in tumors. Current clinical treatments to overcome MDR involve the co-delivery of a Pgp inhibitor and a chemotherapeutic. A concern for this treatment that has led to varied clinical trial success is the associated systemic toxicities involving endogenous Pgp. Local drug delivery systems, such as in situ forming implants (ISFIs), alleviate this problem by delivering a high concentration of the drug directly to the target site without the associated systemic toxicities. ISFIs are polymeric drug solutions that undergo a phase transition upon injection into an aqueous environment to form a solid drug eluting depot allowing for a high initial intratumoral drug concentration. In this study, we have developed an ISFI capable of overcoming the Pgp resistance by co-delivering a chemotherapeutic, Doxorubicin (Dox), with a Pgp inhibitor, either Pluronic P85 or Valspodar (Val). Studies investigated in vitro cytotoxicity of Dox when combined with either Pgp inhibitor, effect of the inhibitors on release of Dox from implants in PBS, in vivo Dox distribution and retention in a subcutaneous flank colorectal murine tumor, and therapeutic response characterized by tumor growth curves and histopathology. Dox + Val showed a 4-fold reduction in the 50% lethal dose (LD₅₀) after 48 hours. Concurrent delivery of Dox and Val showed the greatest difference at 16 days post injection for both Dox penetration and retention. This treatment group had a 5-fold maximum Dox penetration compared to Dox alone ISFIs (0.53 ± 0.22 cm vs 0.11 ± 0.11 cm, respectively, from the center of the ISFI). Additionally, there was a 3-fold increase in normalized total intratumoral Dox intensity with the Dox + Val ISFIs compared to Dox alone ISFIs (0.54 ± 0.11 vs 0.18 ± 0.09, respectively). Dox + Val ISFIs showed a 2-fold reduction in tumor growth and a 27.69% increase in necrosis 20 days post-injection compared to Dox alone ISFIs. These findings demonstrate that co-delivery of Dox and Val via ISFI can avoid systemic toxicity issues seen with clinical Pgp inhibitors.

Minimally invasive implantation and decreased inflammation reduce osteoinduction of biomaterial

Surgical trauma of biomaterial implantation significantly influences the immune system and the biological effects of biomaterials. Minimally invasive surgery has become a trend of clinical development but violating the concept of osteoimmunomodulation will hinder the biological effects of materials. Our study focused on biphasic calcium phosphate (BCP), the ectopia osteoinductive materials, filling the research blank of the significance of adaptive immunity crosstalk with bone biomaterials, and improving the interaction mechanism between bone biomaterials and immune response.

Methods: The BCP bioceramics were implanted by conventional and minimally invasive methods in the gastrocnemius wild-type or T cells depleted mice to test the effect of ectopia osteoinduction. Moreover, flow cytometry was used to detect immune responses, T cell sorting and Western Blot molecular biology experiments, and transwell assays migration of mesenchymal stem cells (MSCs).

Results: We found that BCP, an implantable osteoinductive material, could not activate the adaptive immune response mediated by T cells after minimally invasive surgery. Further studies revealed that under the conventional non-minimally invasive BCP implantation, a positive correlation existed between T cell recruitment and the infiltration and osteogenic differentiation of MSCs. Interestingly, after BCP was implanted by minimally invasive surgery or implanted in T cell depleted mice, MSCs infiltration and osteogenic differentiation were significantly reduced, and BCP could not achieve the biological effects of ectopia ossification. Finally, we confirmed that a certain extent inflammatory stimulation activated the adaptive immune response mediated by T cells, up-regulated the nuclear factor-κB (NF-κB) signal in T cells, released a large amount of chemokine C-C motif chemokine ligand 5(CCL5) to recruit MSCs to the surrounding material, and finally achieved the ideal effect of osteoinduction.

Conclusion: From experimental research and clinical surgery, this study discovered that the T cells are indispensable in the ectopia ossification mediated by osteoinductive materials, put forward and confirmed the surgery method as a key variable factor restricting the application effect of biological materials, enriched the key mechanism of adaptive immunity in osteoimmunomodulation, and laid a theoretical foundation for the development of osteoinductive materials and bone tissue regeneration.

Intraductal Drug Delivery to the Breast: Effect of Particle Size and Formulation on Breast Duct and Lymph Node Retention

Drug delivery by direct intraductal administration can achieve high local drug concentration in the breast and minimize systemic levels. However, the clinical application of this approach for breast cancer treatment is limited by the rapid clearance of the drug from the ducts. With the goal of developing strategies to prolong drug retention in the breast, this study was focused on understanding the influence of particle size and formulation on breast duct and lymph node retention. Fluorescent-labeled polystyrene (PS) particles ranging in size from 100 to 1000 nm were used to study the influence of particle size. Polylactic acid-co-glycolic acid (PLGA) was used to develop and test formulations for intraductal delivery. Cy 5.5, a near-IR dye, was encapsulated in PLGA microparticles, nanoparticles, and the in situ gel to study the biodistribution in rats using an in vivo imager. PS microparticles (1 μm) showed longer retention in the duct compared to 100 and 500 nm nanoparticles. The ductal retention half-life was 5-fold higher for PS microparticles compared to the nanoparticles. On the other hand, the free dye was cleared from the breast within 6 h. PLGA nanoparticles sustained the release of Cy 5.5 for >4 days. Microparticles and gel showed a much slower release than nanoparticles. PLGA in situ gel and microparticles were retained in the breast for up to 4 days, while the nanoparticles were retained in the breast for 2 days. PLGA nanoparticles and microparticles drained to the axillary lymph node and were retained for up to 24 and 48 h, respectively, while the in situ gel and the free dye did not show any detectable fluorescence in the lymph nodes. Taken together, the results demonstrate the feasibility of prolonged retention in the breast duct and lymph node by optimal formulation design. The findings can serve as a framework to design formulations for localized treatment of breast cancer.

Ultra-long-acting tunable biodegradable and removable controlled release implants for drug delivery

Here we report an ultra-long-acting tunable, biodegradable, and removable polymer-based delivery system that offers sustained drug delivery for up to one year for HIV treatment or prophylaxis. This robust formulation offers the ability to integrate multiple drugs in a single injection, which is particularly important to address the potential for drug resistance with monotherapy. Six antiretroviral drugs were selected based on their solubility in N-methyl-2-pyrrolidone and relevance as a combination therapy for HIV treatment or prevention. All drugs released with concentrations above their protein-adjusted inhibitory concentration and retained their physical and chemical properties within the formulation and upon release. The versatility of this formulation to integrate multiple drugs and provide sustained plasma concentrations from several weeks to up to one year, combined with its ability to be removed to terminate the treatment if necessary, makes it attractive as a drug delivery platform technology for a wide range of applications.

Sucrose Acetate Isobutyrate as an In situ Forming Implant for Sustained Release of Local Anesthetics

OBJECTIVE

In this study, an injectable Sucrose Acetate Isobutyrate (SAIB) drug delivery system (SADS) was designed and fabricated for the sustained release of Ropivacaine (RP) to prolong the duration of local anesthesia.

METHODS

By mixing SAIB, RP, and N-methyl-2-pyrrolidone, the SADS was prepared in a sol state with low viscosity before injection. After subcutaneous injection, the pre-gel solution underwent gelation in situ to form a drug-released depot.

RESULT

The in vitro release profiles and in vivo pharmacokinetic analysis indicated that RP-SADS had suitable controlled release properties. Particularly, the RP-SADS significantly reduced the initial burst release after subcutaneous injection in rats.

CONCLUSION

In a pharmacodynamic analysis of rats, the duration of nerve blockade was prolonged by over 3-fold for the RP-SADS formulation compared to RP solution. Additionally, RP-SADS showed good biocompatibility in vitro and in vivo. Thus, the SADS-based depot technology is a safe drug delivery strategy for the sustained release of local anesthetics with long-term analgesia effects.

Noninvasive characterization of in situ forming implant diffusivity using diffusion-weighted MRI

In situ forming implants (ISFIs) form a solid drug-eluting depot, releasing drug for an extended period of time after a minimally-invasive injection. Clinical use of ISFIs has been limited because many factors affect drug release kinetics. The aim of this study was to use diffusion-weighted MRI (DWI) to noninvasively quantify spatial-temporal changes in implant diffusivity in situ. ISFIs were formed using poly(lactic-co-glycolic) acid, with a molecular weight of either 15 kDa or 52 kDa, and fluorescein as the mock drug. Drug release, polymer erosion, polymer degradation, and implant diffusivity were analyzed in vitro over 21 days. DWI was also performed in vivo over 5 days. Spatial diffusivity maps of the implant were generated using DWI data. Results showed constant diffusivity at the implant shell ((1.17 ± 0.13) × 10^-3 mm²/s) and increasing diffusivity within the interior over time (from (0.268 ± 0.081) × 10^-3 mm²/s during day 1 to (1.88 ± 0.04) × 10^-3 mm²/s at 14 d), which correlated with increasing porosity of the implant microstructure. Implants formed in vivo followed the same diffusivity trend as those in vitro. This study validates the use of DWI to provide novel functional information about implant behavior through its ability to noninvasively characterize transport properties within the implant both in vitro and in vivo.

Formulation of Bioerodible Ketamine Microparticles as an Analgesic Adjuvant Treatment Produced by Supercritical Fluid Polymer Encapsulation

Pain is inadequately relieved by escalating doses of a strong opioid analgesic such as morphine in up to 25% of patients with cancer-related severe pain complicated by a neuropathic (nerve damage) component. Hence, there is an unmet medical need for research on novel painkiller strategies. In the present work, we used supercritical fluid polymer encapsulation to develop sustained-release poly(lactic-co-glycolic acid) (PLGA) biodegradable microparticles containing the analgesic adjuvant drug ketamine, for injection by the intrathecal route. Using this approach with a range of PLGA co-polymers, drug loading was in the range 10⁻60%, with encapsulation efficiency (EE) of 60⁻100%. Particles were mainly in the size range 20⁻45 µm and were produced in the absence of organic solvents and surfactants/emulsifiers. Investigation of the ketamine release profiles from these PLGA-based microparticles in vitro showed that release took place over varying periods in the range 0.5⁻4.0 weeks. Of the polymers assessed, the ester end-capped PLGA5050DLG-1.5E gave the best-controlled release profile with drug loading at 10%.

The in vivo transformation and pharmacokinetic properties of a liquid crystalline drug delivery system

A liquid crystalline (LC) system, composed of phosphatidylcholine, sorbitan monoleate, and tocopherol acetate, was investigated to understand the in vivo transformation after subcutaneous injection, coupled with the physicochemical and pharmacokinetic properties of the formulation. The rat model was utilized to monitor a pseudo-time course transformation from a precursor LC formulation to the LC matrix, coupled with the blood concentration profiles of the formulations containing leuprolide acetate. Three formulations that result in the H_II phase, demonstrating dissimilar in vitro release profiles, were used. The formulation showing the highest AUC, C_max and T_max, also displayed the greatest release rate in vitro, the lowest viscosity (LC matrix), and an earlier transformation (LC precursor to matrix) in vivo. A potential link between viscosity, phase transformation, and drug release properties of a liquid crystalline system is described.

Injectable PLGA/Fe3O4 implants carrying cisplatin for synergistic magnetic hyperthermal ablation of rabbit VX2 tumor

Magnetic hyperthermia ablation has attracted wide attention in tumor therapy for its minimal invasion. Although the chemo-hyperthermal synergism has been proven to be effective in subcutaneously xenografted tumors of nude mice in our previous experiment, the occurrence of residual tumors due to incomplete ablation is more common in relatively larger and deeper-seated tumors in anti-tumor therapy. Thus, a larger tumor and larger animal model are needed for further study of the therapeutic efficacy. In this study, we tested the efficiency of this newly developed technique using a rabbit tumor model. Furthermore, we chose cisplatin (DDP), which has been confirmed with high efficiency in enhancing hyperthermia therapy as the chemotherapeutic drug for the synergistic magnetic hyperthermal ablation therapy of tumors. In vitro studies demonstrated that developed DDP-loaded magnetic implants (DDP/PLGA-Fe₃O₄) have great heating efficacy and the drug release can be significantly boosted by an external alternating magnetic field (AMF). In vivo studies showed that the phase-transitional DDP/PLGA-Fe₃O₄ materials that are ultrasound (US) and computerized tomography (CT) visible can be well confined in the tumor tissues after injection. When exposed to AMF, efficient hyperthermia was induced, which led to the cancer cells’ coagulative necrosis and accelerating release of the drug to kill residual tumors. Furthermore, an activated anti-tumor immune system can promote apoptosis of tumor cells. In conclusion, the DDP/PLGA-Fe₃O₄ implants can be used efficiently for the combined chemotherapy and magnetic-hyperthermia ablation of rabbit tumors.

Characterization of Antimicrobial Agent Loaded Eudragit RS Solvent Exchange-Induced In Situ Forming Gels for Periodontitis Treatment

Eudragit RS (ERS), a quaternary polyacrylate positively charged polymer, exhibits a very low permeability and swells in aqueous media independently of pH without dissolving. Owing to its high solubility in N-methyl pyrrolidone (NMP), it was interesting to apply as polymer matrix for solvent-exchanged in situ forming gel. The aim of this research was to prepare in situ forming gels from ERS to deliver the antimicrobial agents (doxycycline hyclate, metronidazole, and benzoyl peroxide) for periodontitis treatment. They were evaluated for viscosity and rheology, gel formation, syringeability, drug release, and antimicrobial activities. The solvent exchange between NMP and an external aqueous simulated gingival crevicular fluid stimulated the dissolved ERS transforming into the opaque rigid gel. Antimicrobial agent loaded ERS systems exhibited Newtonian flow with acceptable syringeability. The higher-loaded ERS promoted the more prolongation of drug release because of the retardation of water diffusion into the precipitated matrix. Antimicrobial activities against Staphylococcus aureus, Escherichia coli, Candida albicans, Streptococcus mutans, and Porphyromonas gingivalis depended on type of drugs and test microorganisms. Doxycycline hyclate loaded ERS systems showed these activities greater than the others; however, all of them could inhibit all test microorganisms. Thus, the solvent exchange-induced in situ forming gels comprising ERS-antimicrobial drugs exhibited potential use as localized delivery systems for periodontitis treatment.

Ultrasound-guided intratumoral delivery of doxorubicin from in situ forming implants in a hepatocellular carcinoma model

BACKGROUND

Hepatocellular carcinomas are frequently nonresponsive to systemically delivered drugs. Local delivery provides an alternative to systemic administration, maximizing the dose delivered to the tumor, achieving sustained elevated concentrations of the drug, while minimizing systemic exposure.

RESULTS

Ultrasound-guided deposition of doxorubicin (Dox)-eluting in situ forming implants (ISFI) in an orthotopic tumor model significantly lowers systemic drug levels. As much as 60 µg Dox/g tumors were observed 21 days after ISFI injection. Tumors treated with Dox implants also showed a considerable reduction in progression at 21 days.

CONCLUSION

Dox-eluting ISFIs provide a promising platform for the treatment of hepatocellular carcinomas by which drug can be delivered directly into the lesion, bypassing distribution and elimination by the circulatory system.

Polymer degradation and drug delivery in PLGA-based drug-polymer applications: A review of experiments and theories

Poly (lactic-co-glycolic acid) (PLGA) copolymers have been broadly used in controlled drug release applications. Because these polymers are biodegradable, they provide an attractive option for drug delivery vehicles. There are a variety of material, processing, and physiological factors that impact the degradation rates of PLGA polymers and concurrent drug release kinetics. This work is intended to provide a comprehensive and collective review of the physicochemical and physiological factors that dictate the degradation behavior of PLGA polymers and drug release from contemporary PLGA-based drug-polymer products. In conjunction with the existing experimental results, analytical and numerical theories developed to predict drug release from PLGA-based polymers are summarized and correlated with the experimental observations. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1692-1716, 2017.

Study of an injectable in situ forming gel for sustained-release of Ivermectin in vitro and in vivo

The purpose of this study was to develop an in situ forming gel based on SAIB-PLA composite matrix depot for sustained release of Ivermectin. The burst release and cumulative release were significantly reduced with the increased content of solvents and the minimum burst release and cumulative release were found in formulations with NMP. With the addition of PLA in the NMP based gel, burst release and cumulative release were reduced. When concentration of IVM raised from 1% to 2% and 4%, cumulative release was 2.4-2.9 and 3.1-3.7 times that of 1%. The optimal prescription displayed a slow in vitro release rate with 10.46% burst release and 80% cumulative release in 80 days. Pharmacokinetic results indicate that the effective blood concentration of the gel could be maintained up to 110-120 days, t1/2λz of the gels was (24.37 ± 1.71) days and MRT was (32.86 ± 0.91) days.

Effect of the Subcutaneous Environment on Phase-Sensitive In Situ-Forming Implant Drug Release, Degradation, and Microstructure

In situ-forming implants are a promising platform used for the release of therapeutic agents. Significant changes in behavior occur when the implants are used in vivo relative to implants formed in vitro. To understand how the injection site effects implant behavior, poly(lactic-co-glycolic acid) implants were examined after injection in the subcutaneous space of a Sprague-Dawley rat model to determine how the environment altered implant erosion, degradation, swelling, microstructure, and mock drug release. Changes in implant microstructure occurred over time for implants formed in vivo, where it was observed that the porosity was lost over the course of 5 days. Implants formed in vivo had a significantly greater burst release (p < 0.05) relative to implants formed in vitro. However, during the diffusion period of release, implants formed in vitro had a significantly higher daily release (2.1%/day, p < 0.05), which correlated to changes in implant microstructure. Additionally, implants formed in vitro had a two-fold increase in the first-order degradation kinetics relative to the implants formed in vivo. These findings suggest that the changes in implant behavior occur as a result of changes in the implant microstructure induced by the external environment.

The Effect of Additives on the Behavior of Phase Sensitive In Situ Forming Implants

Phase-sensitive in situ forming implants (ISFI) are a promising platform for the controlled release of therapeutic agents. The simple manufacturing, ease of placement, and diverse payload capacity make these implants an appealing delivery system for a wide range of applications. Tailoring the release profile is paramount for effective treatment of disease. In this study, three innovative formulation modifications were used to control drug release. Specifically, water, 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI), and bovine serum albumin (BSA) were incorporated into an ISFI solution containing the small molecular weight mock drug, sodium fluorescein. The effects of these additives on drug release, swelling, phase inversion, erosion, and implant microstructure were evaluated. Diagnostic ultrasound was used to monitor changes in swelling and phase inversion over time noninvasively. Water, DiI, and the combination of BSA/DiI functioned to reduce burst release 47.6%, 76.6%, and 59.0%, respectively. Incorporation of water into the casting solution also enhanced the release of drug during the diffusion period of release by 165.2% relative to the excipient free control. Incorporation of BSA into the polymer solution did not significantly alter the burst release (p < 0.05); however, the onset of degradation facilitated release was delayed relative to the excipient-free control by 5 days. This study demonstrates that the use of excipients provides a facile method to tailor the release profile and degradation rate of implants without changing the polymer or solvent used in the implant formulation, providing fine control of drug dissolution during distinct phases of release.

Liquid-solid phase-inversion PLGA implant for the treatment of residual tumor tissue after HIFU ablation

Background

HIFU has been shown to be a more suitable alternative for the treatment of primary solid tumors and metastatic diseases than other focal heat ablation techniques due to its noninvasive and extracorporeal nature. However, similar to other focal heat ablation techniques, HIFU is still in need of refinements due to tumor recurrence.

Methods

In this work, we investigated the effectiveness of an adjunct treatment regimen using doxorubicin (DOX)-loaded, injectable, in situ-forming, and phase-inverting PLGA as the second line of defense after HIFU ablation to destroy detrimental residual tumors and to prevent tumor recurrence. All of the statistical analyses were performed using the Statistical Package for the Social Sciences 18.0(SPSS, Inc., Chicago, IL, USA), and p< 0.05 was considered statistically significant. All of the results are presented as the means ± STDEV (standard deviation). For multiple comparisons, ANOVA (differences in tumor volumes, growth rates, apoptosis, proliferation indexes, and Bcl-2 and Bax protein levels) was used when the data were normally distributed with homogenous variance, and rank sum tests were used otherwise. Once significant differences were detected, Student-t tests were used for comparisons between two groups.

Results

Our results revealed that DOX diffused beyond the ablated tissue regions and entered tumor cells that were not affected by the HIFU ablation. Our results also show that HIFU in concert with DOX-loaded PLGA led to a significantly higher rate of tumor cell apoptosis and a lower rate of tumor cell proliferation in the areas beyond the HIFU-ablated tissues and consequently caused significant tumor volume shrinkage (tumor volumes:0.26±0.1,1.09±0.76, and 1.42±0.9cm³ for treatment, sham, and no treatment control, respectively).

Conclusions

From these results, we concluded that the intralesional injection of DOX-loaded PLGA after HIFU ablation is significantly more effective than HIFU alone for the treatment of solid tumors.

N-methyl pyrrolidone/bone morphogenetic protein-2 double delivery with in situ forming implants

Bone morphogenetic proteins (BMPs) are growth and differentiation factors involved during development in morphogenesis, organogenesis and later mainly in regeneration processes, in particular in bone where they are responsible for osteoinduction. For more than a decade, recombinant human (rh)BMP-2 has been used in the clinic for lumbar spinal fusion at non-physiological high dosages that appear to be causative for side effects, like male sterility. A possible strategy to reduce the effective amount of rhBMP-2 in the clinic is the co-delivery with an enhancer of BMPs' activity. In an earlier study, we showed that N-methylpyrrolidone (NMP) enhances BMP activity in vitro and in vivo. Here we report on the development of a slow and sustained double delivery of rhBMP-2 and NMP via an in situ forming implant based on poly(lactide-co-glycolide). The results showed that the release of NMP can be adjusted by varying the lactide/glycolide ratio and the polymer's molecular weight. The same applied to rhBMP-2, with release rates that could be sustained from two to three weeks. In the in vivo model of a critical size defect in the calvarial bone of rabbits, the implant containing 50mol% lactide performed better than the one having 75mol% lactide in terms of defect bridging and extent of bony regenerated area. In situ forming implants for the double delivery of the BMP enhancer NMP and rhBMP-2 appear to be promising delivery systems in bone regeneration.

Applications of ultrasound for image-guided drug delivery in cancer chemotherapy

Many challenges persist in the field of cancer drug delivery. The field of image-guided drug delivery emerged from the need for accurate in vivo quantification of various pharmacokinetic and therapeutic delivery parameters. Today it continues to be an essential tool in delivery system R&D while providing innovative noninvasive strategies for advancement. This article will focus specifically on the role of ultrasound in this area. Ultrasound provides a novel means by which drugs can be delivered through guided placement of a local delivery device, or through the destruction of ultrasound contrast agents at the target location. The techniques developed by our research group have examined these areas and have also led to a more thorough understanding into the parameters that affect drug release kinetics in vivo from in situ-forming implants. In addition, we have developed a new ultrasound contrast agent capable of extravascular delivery to tumors for improved detection and eventual treatment. Both areas will be discussed in this research spotlight.

Polymeric materials for theranostic applications

Nanotechnology has continuously contributed to the fast development of diagnostic and therapeutic agents. Theranostic nanomedicine has encompassed the ongoing efforts on concurrent molecular imaging of biomarkers, delivery of therapeutic agents, and monitoring of therapy response. Among these formulations, polymer-based theranostic agents hold great promise for the construction of multifunctional agents for translational medicine. In this article, we reviewed the state-of-the-art polymeric nanoparticles, from preparation to application, as potential theranostic agents for diagnosis and therapy. We summarized several major polymer formulas, including polymeric conjugate complexes, nanospheres, micelles, and dendrimers for integrated molecular imaging and therapeutic applications.

Photoacoustic Microscopy in Tissue Engineering

Photoacoustic tomography (PAT) is an attractive modality for noninvasive, volumetric imaging of scattering media such as biological tissues. By choosing the ultrasonic detection frequency, PAT enables scalable spatial resolution with desired imaging depth up to ~7 cm while maintaining a high depth-to-resolution ratio of ~200 and consistent optical absorption contrasts. Photoacoustic microscopy (PAM), the microscopic embodiment of PAT, aims to image at millimeter depth and micrometer-scale resolution. PAM is well-suited for characterizing three-dimensional scaffold-based samples, including scaffolds themselves, cells, and blood vessels, both qualitatively and quantitatively. Here we review our previous work on applications of PAM in tissue engineering and then discuss its future developments.

Image guided biodistribution of drugs and drug delivery

Image guided technique is playing an increasingly important role in the investigation of the biodistribution and pharmacokinetics of drugs or drug delivery systems. The application of these new materials and techniques with combined properties of diagnosis and therapy can benefit the development of targeted drug delivery system and modern personalized medicine This special issue provides an up-to-date collection of original research articles and review on the development of novel targeted drug and drug delivery systems combining with non-invasive image guided techniques for chemotherapeutic reagents or DNA delivery.