Rapid Fabrication of Membrane-Integrated Thermoplastic Elastomer Microfluidic Devices

Engineered Biomimetic Membranes for Organ-on-a-Chip

Organ-on-a-chip (OOC) systems are engineered nanobiosystems to mimic the physiochemical environment of a specific organ in the body. Among various components of OOC systems, biomimetic membranes have been regarded as one of the most important key components to develop controllable biomimetic bioanalysis systems. Here, we review the preparation and characterization of biomimetic membranes in comparison with the features of the extracellular matrix. After that, we review and discuss the latest applications of engineered biomimetic membranes to fabricate various organs on a chip, such as liver, kidney, intestine, lung, skin, heart, vasculature and blood vessels, brain, and multiorgans with perspectives for further biomedical applications.

L-Cysteine capped zinc oxide nanoparticles induced cellular response on adenocarcinomic human alveolar basal epithelial cells using a conventional and organ-on-a-chip approach

Zinc oxide nanoparticles (ZnO NPs) are among the well-characterized nanomaterials with multifaceted biomedical applications, including biomedical imaging, drug delivery, and pharmaceutical preparations. The high surface charge of ZnO NPs leads to the agglomeration of the particles. Therefore, surface coating with a suitable ligand can increase colloidal stability. In this present study, in-vitro responses of ZnO NPs capped with a sulfur-containing amino acid, L-cysteine (Cys-ZnO NPs), on A549 cells was investigated. Fourier Transform Infrared Spectroscopy (FTIR) studies were carried out to confirm the capping of ZnO NPs with L-cysteine. Cytotoxic studies using A549 cells demonstrated reduced cytotoxicity in comparison with already reported pristine Zinc Oxide nanoparticles. The cellular uptake is confirmed by fluorescent cytometry. However, a higher concentration (160 µg/mL) of Cys-ZnO NPs led to apoptotic cell death marked by nuclear condensation, mitochondrial membrane depolarization, actin filament condensation, lysosomal damage LDH leakage, intracellular ROS production, blebbing, upregulation of Bax and downregulation of Bcl-2 gene expression. Cys-ZnO NPs treatment was also carried out in cells cultured in a microfluidic lung-on-a-chip device under a physiologically relevant flow rate. The study concluded that the microfluidic-based lung-on-a-chip culture resulted in reduced cell death compared to the conventional condition.

Microfluidic synthesis of gelatin nanoparticles conjugated with nitrogen-doped carbon dots and associated cellular response on A549 cells

Gelatin nanoparticles are a versatile class of nanoparticles with wide applications, especially in drug delivery and gene delivery. The inherent biocompatible nature of gelatin and various functional groups can improve the cellular interactions and enhance the efficacy of different drug formulations. Microfluidic hydrodynamic flow-focusing techniques can be used for the synthesis of gelatin nanoparticles. The present work syntheses nitrogen-doped carbon dots conjugated with gelatin nanoparticles (NQD-GNPs) using a microfluidic approach and associated cellular response through various assays. MTT, neutral red uptake, and Calcein AM/Propidium iodide (PI) assays independently proved the biocompatible nature of NQD-GNPs. The NQD-GNPs treatment demonstrated a slight increase in reactive nitrogen species generation and lactate dehydrogenase release. However, it does not alter the mitochondrial membrane potential or lysosomal stability. The cellular uptake of NQD-GNP depends on the concentration and does not affect the apoptotic pathway of the cells. Most of the cells remained viable even after treatment with high concentrations of NQD-GNPs.

Physiological and Disease Models of Respiratory System Based on Organ-on-a-Chip Technology

The pathogenesis of respiratory diseases is complex, and its occurrence and development also involve a series of pathological processes. The present research methods are have difficulty simulating the natural developing state of the disease in the body, and the results cannot reflect the real growth state and function in vivo. The development of microfluidic chip technology provides a technical platform for better research on respiratory diseases. The size of its microchannel can be similar to the space for cell growth in vivo. In addition, organ-on-a-chip can achieve long-term co-cultivation of multiple cells and produce precisely controllable fluid shear force, periodically changing mechanical force, and perfusate with varying solute concentration gradient. To sum up, the chip can be used to analyze the specific pathophysiological changes of organs meticulously, and it is widely used in scientific research on respiratory diseases. The focus of this review is to describe and discuss current studies of artificial respiratory systems based on organ-on-a-chip technology and to summarize their applications in the real world.

Facile Route for 3D Printing of Transparent PETg-Based Hybrid Biomicrofluidic Devices Promoting Cell Adhesion

3D printing has emerged as a promising fabrication technique for microfluidic devices, overcoming some of the challenges associated with conventional soft lithography. Filament-based polymer extrusion (popularly known as fused deposition modeling (FDM)) is one of the most accessible 3D printing techniques available, offering a wide range of low-cost thermoplastic polymer materials for microfluidic device fabrication. However, low optical transparency is one of the significant limitations of extrusion-based microfluidic devices, rendering them unsuitable for cell culture-related biological applications. Moreover, previously reported extrusion-based devices were largely dependent on fluorescent dyes for cell imaging because of their poor transparency. First, we aim to improve the optical transparency of FDM-based microfluidic devices to enable bright-field microscopy of cells. This is achieved using (1) transparent polymer filament materials such as poly(ethylene terephthalate) glycol (PETg), (2) optimized 3D printing process parameters, and (3) a hybrid approach by integrating 3D printed microfluidic devices with cast poly(dimethylsiloxane) (PDMS) blocks. We begin by optimizing four essential 3D printing process parameters (layer height, printing speed, cooling fan speed, and extrusion flow), affecting the overall transparency of 3D printed devices. Optimized parameters produce exceptional optical transparency close to 80% in 3D printed PETg devices. Next, we demonstrate the potential of FDM-based 3D printing to fabricate transparent micromixing devices with complex planar and nonplanar channel networks. Most importantly, cells cultured on native 3D printed PETg surfaces show excellent cell attachment, spreading, and proliferation during 3 days of culture without extracellular matrix coating or surface treatment. Next, we introduce L929 cells inside hybrid PETg-PDMS biomicrofluidic devices as a proof of concept. We demonstrate that 3D printed hybrid biomicrofluidic devices promote cell adhesion, allow bright-field microscopy, and maintain high cell viability for 3 days. Finally, we demonstrate the applicability of the proposed fabrication approach for developing 3D printed microfluidic devices from other FDM-compatible transparent polymers such as polylactic acid (PLA) and poly(methyl methacrylate) (PMMA).

Lung on a Chip Development from Off-Stoichiometry Thiol-Ene Polymer

Current in vitro models have significant limitations for new respiratory disease research and rapid drug repurposing. Lung on a chip (LOAC) technology offers a potential solution to these problems. However, these devices typically are fabricated from polydimethylsiloxane (PDMS), which has small hydrophobic molecule absorption, which hinders the application of this technology in drug repurposing for respiratory diseases. Off-stoichiometry thiol–ene (OSTE) is a promising alternative material class to PDMS. Therefore, this study aimed to test OSTE as an alternative material for LOAC prototype development and compare it to PDMS. We tested OSTE material for light transmission, small molecule absorption, inhibition of enzymatic reactions, membrane particle, and fluorescent dye absorption. Next, we microfabricated LOAC devices from PDMS and OSTE, functionalized with human umbilical vein endothelial cell (HUVEC) and A549 cell lines, and analyzed them with immunofluorescence. We demonstrated that compared to PDMS, OSTE has similar absorption of membrane particles and effect on enzymatic reactions, significantly lower small molecule absorption, and lower light transmission. Consequently, the immunofluorescence of OSTE LOAC was significantly impaired by OSTE optical properties. In conclusion, OSTE is a promising material for LOAC, but optical issues should be addressed in future LOAC prototypes to benefit from the material properties.