Evidence of Strong Dzyaloshinskii-Moriya Interaction at the Cobalt/Hexagonal Boron Nitride Interface

The Dzyaloshinskii-Moriya interaction (DMI) and perpendicular magnetic anisotropy (PMA) were measured on four series of Co films (1-2.2 nm thick) grown on Pt or Au and covered with h-BN or Cu. Clean h-BN/Co interfaces were obtained by exfoliating h-BN and transferring it onto the Co film in situ in the ultra-high-vacuum evaporation chamber. By comparing h-BN and Cu-covered samples, the DMI induced by the Co/h-BN interface was extracted and found to be comparable in strength to that of the Pt/Co interface, one of the largest known values. The strong observed DMI despite the weak spin-orbit interaction in h-BN supports a Rashba-like origin in agreement with recent theoretical results. Upon combination of it with Pt/Co in Pt/Co/h-BN heterostructures, even stronger PMA and DMI are found which stabilizes skyrmions at room temperature and a low magnetic field.

Universal Pinning Energy Barrier for Driven Domain Walls in Thin Ferromagnetic Films

We report a comparative study of magnetic field driven domain wall motion in thin films made of different magnetic materials for a wide range of field and temperature. The full thermally activated creep motion, observed below the depinning threshold, is shown to be described by a unique universal energy barrier function. Our findings should be relevant for other systems whose dynamics can be modeled by elastic interfaces moving on disordered energy landscapes.

Interfacial Control of Magnetic Properties at LaMnO3/LaNiO3 Interfaces

The functional properties of oxide heterostructures ultimately rely on how the electronic and structural mismatches occurring at interfaces are accommodated by the chosen materials combination. We discuss here LaMnO3/LaNiO3 heterostructures, which display an intrinsic interface structural asymmetry depending on the growth sequence. Using a variety of synchrotron-based techniques, we show that the degree of intermixing at the monolayer scale allows interface-driven properties such as charge transfer and the induced magnetic moment in the nickelate layer to be controlled. Further, our results demonstrate that the magnetic state of strained LaMnO3 thin films dramatically depends on interface reconstructions.

Electric-field control of magnetic order above room temperature

Controlling magnetism by means of electric fields is a key issue for the future development of low-power spintronics. Progress has been made in the electrical control of magnetic anisotropy, domain structure, spin polarization or critical temperatures. However, the ability to turn on and off robust ferromagnetism at room temperature and above has remained elusive. Here we use ferroelectricity in BaTiO3 crystals to tune the sharp metamagnetic transition temperature of epitaxially grown FeRh films and electrically drive a transition between antiferromagnetic and ferromagnetic order with only a few volts, just above room temperature. The detailed analysis of the data in the light of first-principles calculations indicate that the phenomenon is mediated by both strain and field effects from the BaTiO3. Our results correspond to a magnetoelectric coupling larger than previous reports by at least one order of magnitude and open new perspectives for the use of ferroelectrics in magnetic storage and spintronics.

Current-induced magnetic domain wall motion below intrinsic threshold triggered by Walker breakdown

Controlling the position of a magnetic domain wall with electric current may allow for new types of non-volatile memory and logic devices. To be practical, however, the threshold current density necessary for domain wall motion must be reduced below present values. Intrinsic pinning due to magnetic anisotropy, as recently observed in perpendicularly magnetized Co/Ni nanowires, has been shown to give rise to an intrinsic current threshold J(th)(0). Here, we show that domain wall motion can be induced at current densities 40% below J(th)(0) when an external magnetic field of the order of the domain wall pinning field is applied. We observe that the velocity of the domain wall motion is the vector sum of current- and field-induced velocities, and that the domain wall can be driven against the direction of a magnetic field as large as 2,000 Oe, even at currents below J(th)(0). We show that this counterintuitive phenomenon is triggered by Walker breakdown, and that the additive velocities provide a unique way of simultaneously determining the spin polarization of current and the Gilbert damping constant.

Magnetization reversal in Pt/Co(0.5 nm)/Pt nano-platelets patterned by focused ion beam lithography

Arrays of ultrathin Pt/Co(0.5 nm)/Pt nano-platelets with lateral sizes ranging from 30 nm to 1 µm have been patterned by focused ion beam (FIB) lithography under a weak Ga(+) ion fluence. From polar magneto-optical Kerr microscopy it is demonstrated that nano-platelets are ferromagnetic with perpendicular anisotropy down to a size of 50 nm. The irradiation process creates a magnetically soft ring at the nano-platelet periphery in which domain nucleation is initiated at a low field. The magnetization reversal in nano-platelets can be interpreted using a confined droplet model. All of the results prove that ultimate FIB patterning is suitable for preparing discrete magnetic recording media or small magnetic memory elements and nano-devices.

Electric field switching of the magnetic anisotropy of a ferromagnetic layer exchange coupled to the multiferroic compound BiFeO3

We report here that a Permalloy layer deposited on top of a multiferroic BiFeO3 single crystal acquires an easy magnetic direction along the propagation vector of the cycloidal arrangement of antiferromagnetic moments in BiFeO3. This anisotropy originates from a direct magnetic coupling with the canted spins forming the cycloid. Moreover, we show that an electric field-induced change of electric polarization is able to toggle the direction of anisotropy in the ferromagnet through the magnetoelectric effect, which links the antiferromagnetic spins to the local polarization in BiFeO3.

High resolution polar Kerr magnetometer for nanomagnetism and nanospintronics

A new high resolution polar magneto-optical (MO) Kerr magnetometer, devoted to the study of nanometer sized elements with perpendicular magnetic anisotropy, is described. The unique performances of this setup in terms of sensitivity (1.2x10(-15) emu), stability (lateral drift +/-35 nm over 3 h), and resolution (laser spot full width at half maximum down to 470 nm) are demonstrated, and illustrated by Kerr hysteresis loop measurements on a unique ultrathin magnetic nanodot, and over small segments of ultranarrow magnetic tracks. Large scanning MO Kerr microscopy images were also obtained with the same performances.

Creep and flow regimes of magnetic domain-wall motion in ultrathin Pt/Co/Pt films with perpendicular anisotropy

We report on magnetic domain-wall velocity measurements in ultrathin Pt/Co(0.5-0.8 nm)/Pt films with perpendicular anisotropy over a large range of applied magnetic fields. The complete velocity-field characteristics are obtained, enabling an examination of the transition between thermally activated creep and viscous flow: motion regimes predicted from general theories for driven elastic interfaces in weakly disordered media. The dissipation limited flow regime is found to be consistent with precessional domain-wall motion, analysis of which yields values for the damping parameter, alpha.

Deroughening of domain wall pairs by dipolar repulsion

As a magnetic domain wall propagates under small fields through a random potential, it roughens as a result of weak collective pinning, known as creep. Using Kerr microscopy, we report experimental evidence of a surprising deroughening of wall pairs in the creep regime, in a 0.5 nm thick Co layer with perpendicular anisotropy. A bound state is found in cases where two rough domains nucleated far away from one another and first growing under the action of a magnetic field eventually do not merge. The two domains remain separated by a strip of unreversed magnetization, characterized by flat edges and stabilized by dipolar fields. A creep theory that includes dipolar interactions between domains successfully accounts for (i) the domain wall deroughening as the width of the strip decreases and (ii) the quasistatic and dynamic field dependence of the strip width s.

Magnetic domain wall propagation unto the percolation threshold across a pseudorectangular disordered lattice

The reversal process of thin FePt/Pt(001) layers with perpendicular magnetization was observed by magnetic imaging techniques. Reversal occurs through domain wall propagation across a strongly disordered rectangular lattice of linear anisotropy defects. Micromagnetic simulations of domain wall pinning allowed deriving an analytical model of the reversal process unto percolation threshold. Quantitative agreement is found between the calculated and experimental fractal dimension of the reversed domain.

Conserved stem-loop structures in the HIV-1 RNA region containing the A3 3' splice site and its cis-regulatory element: possible involvement in RNA splicing

The HIV-1 transcript is alternatively spliced to over 30 different mRNAs. Whether RNA secondary structure can influence HIV-1 RNA alternative splicing has not previously been examined. Here we have determined the secondary structure of the HIV-1/BRU RNA segment, containing the alternative A3, A4a, A4b, A4c and A5 3' splice sites. Site A3, required for tat mRNA production, is contained in the terminal loop of a stem-loop structure (SLS2), which is highly conserved in HIV-1 and related SIVcpz strains. The exon splicing silencer (ESS2) acting on site A3 is located in a long irregular stem-loop structure (SLS3). Two SLS3 domains were protected by nuclear components under splicing condition assays. One contains the A4c branch points and a putative SR protein binding site. The other one is adjacent to ESS2. Unexpectedly, only the 3' A residue of ESS2 was protected. The suboptimal A3 polypyrimidine tract (PPT) is base paired. Using site-directed mutagenesis and transfection of a mini-HIV-1 cDNA into HeLa cells, we found that, in a wild-type PPT context, a mutation of the A3 downstream sequence that reinforced SLS2 stability decreased site A3 utilization. This was not the case with an optimized PPT. Hence, sequence and secondary structure of the PPT may cooperate in limiting site A3 utilization.

Molecular characterization at the RNA and gene levels of U3 snoRNA from a unicellular green alga, Chlamydomonas reinhardtii

A U3 snoRNA gene isolated from a Chlamydomonas reinhardtii (CRE:) genomic library contains putative pol III-specific transcription signals similar to those of RNA polymerase III-specific small nuclear (sn)RNA genes of higher plants. The 222 nt long CRE: U3 snoRNA was immunoprecipitated by anti-gamma-mpppN antisera, but not by anti-m(2,2,7)G antibodies, supporting the notion that it is a RNA polymerase III transcript. Tagged CRE: U3 snoRNA gene constructs were expressed in CRE: cells. Results of chemical and enzymatic structure probing of CRE: U3 snoRNA in solution and of DMS modification of CRE: U3 snoRNA under in vivo conditions revealed that the two-hairpin structure of the 5'-domain that is found in solution is no longer detected under in vivo conditions. The observed differences can be explained by the formation of several base pair interactions with the 18S and 5'-ETS parts of the pre-rRNA. A model that involves five intermolecular helices is proposed.

U3 snoRNA genes with and without intron in the Kluyveromyces genus: yeasts can accommodate great variations of the U3 snoRNA 3'-terminal domain

The U3 snoRNA coding sequences from the genomic DNAs of Kluyveromyces delphensis and four variants of the Kluyveromyces marxianus species were cloned by PCR amplification. Nucleotide sequence analysis of the amplification products revealed a unique U3 snoRNA gene sequence in all the strains studied, except for K. marxianus var. fragilis. The K. marxianus U3 genes were intronless, whereas an intron similar to those of the Saccharomyces cerevisiae U3 genes was found in K. delphensis. Hence, U3 genes with and without intron are found in yeasts of the Saccharomycetoideae subfamily. The secondary structure of the K. delphensis pre-U3 snoRNA and of the K. marxianus mature snoRNAs were studied experimentally. They revealed a strong conservation in yeasts of (1) the architecture of U3 snoRNA introns, (2) the 5'-terminal domain of the mature snoRNA, and (3) the protein-anchoring regions of the U3 snoRNA 3' domain. In contrast, stem-loop structures 2, 3, and 4 of the 3' domain showed great variations in size, sequence, and structure. Using a genetic test, we show that, in spite of these variations, the Kluyveromyces U3 snoRNAs are functional in S. cerevisiae. We also show that S. cerevisiae U3A snoRNAs lacking the stem-loop structure 2 or 4 are functional. Hence, U3 snoRNA function can accommodate great variations of the RNA 3'-terminal domain.

An in vivo and in vitro structure-function analysis of the Saccharomyces cerevisiae U3A snoRNP: protein-RNA contacts and base-pair interaction with the pre-ribosomal RNA

The structure and accessibility of the S. cerevisiae U3A snoRNA was studied in semi-purified U3A snoRNPs using both chemical and enzymatic probes and in vivo using DMS as the probe. The results obtained show that S. cerevisiae U3A snoRNA is composed of a short 5' domain with two stem-loop structures containing the phylogenetically conserved boxes A' and A and a large cruciform 3' domain containing boxes B, C, C' and D. A precise identification of RNA-protein contacts is provided. Protection by proteins in the snoRNP and in vivo are nearly identical and were exclusively found in the 3' domain. There are two distinct protein anchoring sites: (i), box C' and its surrounding region, this site probably includes box D, (ii) the boxes B and C pair and the bases of stem-loop 2 and 4. Box C' is wrapped by the proteins. RNA-protein interactions are more loose at the level of boxes C and D and a box C and D interaction is preserved in the snoRNP. In accord with this location of the protein binding sites, an in vivo mutational analysis showed that box C' is important for U3A snoRNA accumulation, whereas mutations in the 5' domain have little effect on RNA stability. Our in vivo probing experiments strongly suggest that, in exponentially growing cells, most of the U3A snoRNA molecules are involved in the 10-bp interaction with the 5'-ETS region and in two of the interactions recently proposed with 18S rRNA sequences. Our experimental study leads to a slightly revised version of the model of interaction proposed by J. Hughes. Single-stranded segments linking the heterologous helices are highly sensitive to DMS in vivo and their functional importance was tested by a mutational analysis.

Chlamydomonas U2, U4 and U6 snRNAs. An evolutionary conserved putative third interaction between U4 and U6 snRNAs which has a counterpart in the U4atac-U6atac snRNA duplex

The spliceosomal UsnRNAs U2, U4 and U6 from the green alga Chlamydomonas reinhardtii (Cre) were sequenced using a combination of RNA and cDNA sequencing methods and were compared to other sequenced UsnRNAs. The lengths of Cre U6 and Cre U2 RNAs are similar to those of their higher plant equivalents. Cre U4 RNA is shorter (139 nt) than its counterpart from higher plants (150-154 nt), and contains stem IV and loop D which are absent, with the exception of the Tetrahymena U4 RNA, from the U4 RNAs of other unicellular organisms studied to date. Base-pairing interactions between U6 and U4 RNAs and between U6 and U2 RNAs, identical to those described for mammalian and yeast systems, are structurally feasible in the Cre system. In addition, based on comparative analyses of the predicted U4/U6 RNA duplex from various species, an evolutionary conserved third putative U6-U4 interaction was found. Interestingly, it can also be formed with the recently discovered U6atac and U4atac RNAs. This is a strong support in favor of the possible biological significance of this third putative interaction. Based on comparative analysis, an extension of the earlier described U6-U2 interaction patterns is also proposed.

Secondary structure of the yeast Saccharomyces cerevisiae pre-U3A snoRNA and its implication for splicing efficiency

The Saccharomyces cerevisiae U3 snoRNA genes contain long spliceosomal introns with noncanonical branch site sequences. By using chemical and enzymatic methods to probe the RNA secondary structure and site-directed mutagenesis, we established the complete secondary structure of the U3A snoRNA precursor. This is the first determination of the complete secondary structure of an RNA spliced in a spliceosome. The peculiar cruciform structure of the U3A snoRNA 3'-terminal region is formed in the precursor RNA and the conserved Boxes B and C are accessible for binding the U3 snoRNP proteins. The intron forms a highly folded structure with a long central stem-loop structure that brings the 5' box and the branch site together. This is in agreement with the idea that secondary structure interactions are necessary for efficient splicing of long introns in yeast. The 3' splice site is in a bulged loop and the branch site sequence is single-stranded. Surprisingly, the 5' splice site is involved in a 6-base pair interaction. We used in vitro splicing experiments to show that, despite a noncanonical branch site sequence and a base paired 5' splice site, transcripts that mimic the authentic pre-U3A snoRNA are spliced very efficiently in vitro. Sequestering the 5' splice site in a more stable structure had a negative effect on splicing, which was partially compensated by converting the branch site sequence into a canonical sequence. Analysis of spliceosomal complex formation revealed a cumulative negative effect of a base pair interaction at the 5' splice site and of a deviation to the consensus sequence at the branch site on the efficiency of spliceosome formation in vitro.

A unique U5-->A substitution in the Physarum polycephalum U1 snRNA: evidence at the RNA and gene levels

The 5' terminal sequence of U1 snRNA that base-pairs with the intron 5' splice site in the course of spliceosome assembly was considered to be universally conserved. A study of the P polycephalum U1 snRNA at both RNA and gene levels shows that there are exceptions to this rule: the P polycephalum U1 snRNA has a U to A substitution at position 5, that is partially compensated by a high frequency of T residue at position +4 of introns. In contrast to the yeast genome, the P polycephalum genome contains several U1 snRNA coding sequences (about 20). They either encode the U1A snRNA expressed in microplasmodia or correspond to the previously cloned U1B coding sequence. Both coding sequences show the U5A substitution. The ratio of U1A versus U1B coding sequences is of about 3. A U1A gene was cloned. The 60 nt region upstream of the coding sequence has the same sequence as in the U1B gene. The U1B gene is probably expressed at another stage of the P polycephalum life cycle.

Secondary structure conservation of the U3 small nucleolar RNA introns in Saccharomyces

Using a strategy based on PCR amplification of DNA and sequence analysis, we showed that the presence of introns with the characteristic features of introns spliced in a spliceosome, in the U3A and U3B snoRNA genes that code for the U3 small nucleolar RNA, is not a property restricted to Saccharomyces cerevisiae. It is probably an ancient property of yeasts from the genus Saccharomyces. We detected the U3A and U3B snoRNA genes in Saccharomyces bayanus and in a lager brewing yeast strain. The U3A and U3B intronic sequences are highly conserved. Two additional "U3B-like" snoRNA genes were detected in the lager brewing yeast. Their intronic sequences show several differences, when compared to the U3B intronic sequence. However, despite the numerous mutations, the intron secondary structure is conserved, especially, the central structure. This strongly suggests an important role of this central stem/loop structure for spliceosome assembly and efficient splicing.

Phylogenetic conservation of modified nucleotides in the terminal loop 1 of the spliceosomal U5 snRNA

In order to study the phylogenetic conservation of modified nucleotides in the spliceosomal U5 snRNA, we determined the nucleotide sequences of the U5 snRNAs from the slime mold Physarum polycephalum (EMBL data bank accession numbers: X74440 and X74441) and we identified the pseudouridine and 2'-O-methylated residues. From a comparison of all the U5 snRNAs studied at the level of nucleotide modifications, we concluded that the modified nucleotides in U5 snRNA can be divided into three classes according to their degree of conservation: i) the modified nucleotides of the 5' terminal cap structure that display some variations from one species to the other; ii) the modified nucleotides located in the helical part of the stem/loop structure I that vary greatly in number, position and identity from one species to the other; and iii) the modified nucleotides of the terminal loop 1, that are almost identical in all the species studied. Taking into account the recent discovery of a crucial role played by this terminal loop of U5 snRNA in 5' and 3' splice site definition, we postulate that the numerous modified nucleotides it contains, five out of a total of 11, play an important role in spliceosome assembly and function. Their possible role is discussed.

An experimental study of Saccharomyces cerevisiae U3 snRNA conformation in solution

The conformation of Saccharomyces cerevisiae U3 snRNA (snR17A RNA) in solution was studied using enzymatic and chemical probes. In vitro synthesized and authentic snR17A RNAs have a similar conformation in solution. The S. cerevisiae U3 snRNA is folded in two distinct domains. The 5'-domain has a low degree of compactness; it is constituted of two stem-loop structures separated by a single-stranded segment, which has recently been proposed to basepair with the 5'-ETS of pre-ribosomal RNA. We demonstrate that, as previously proposed, the 5'-terminal region of U3 snRNA has a different structure in higher and lower eukaryotes and that this may be related to pre-rRNA 5'-ETS evolution. The S. cerevisiae U3 snRNA 3'-domain has a cruciform secondary structure and a compact conformation resulting from an higher order structure involving the single-stranded segments at the center of the cross and the bottom parts of helices. Compared to tRNA, where long range interactions take place between terminal loops, this represents another kind of tertiary folding of RNA molecules that will deserve further investigation, especially since the implicated single-strands have highly evolutionarily conserved primary structures that are involved in snRNP protein binding.

The nicotinamide subsite of glyceraldehyde-3-phosphate dehydrogenase studied by site-directed mutagenesis

Directed mutagenesis has been used to study the nicotinamide subsite of the glycolytic NAD-dependent glyceraldehyde-3-phosphate dehydrogenase (GAPDH). Residue Asn313 is involved together with the carboxyamide moiety of the nicotinamide ring in a complex network of hydrogen bonding interactions which fix the position of the pyridinium ring of NAD to which hydride transfer occurs at the C-4 position in the catalytic reaction. The asparagine side-chain has been replaced by that of the Thr and Ala residues and results in mutants with very similar properties. Both mutants show much weaker binding of NAD and lower catalytic efficiency. The mutant Asn313----Thr still exhibits strict B-stereospecificity in hydride transfer and retains the property of negative co-operativity in NAD binding. These experiments strongly suggest that the mutant enzyme undergoes the apo----holo sub-unit structural transition associated with coenzyme binding but that the nicotinamide ring is no longer as rigidly held in its pocket as in the wild type enzyme. The results shed light on the details of the molecular interactions which are responsible for negative co-operativity in this enzyme.

Role of the histidine 176 residue in glyceraldehyde-3-phosphate dehydrogenase as probed by site-directed mutagenesis

The catalytically essential amino acid, histidine 176, in the active site of Escherichia coli glyceraldehyde-3-phosphate dehydrogenase (GAPDH) has been replaced with an asparagine residue by site-directed mutagenesis. The role of histidine 176 as a chemical activator, enhancing the reactivity of the thiol group of cysteine 149, has been demonstrated, with iodoacetamide as a probe. The esterolytic properties of GAPDH, illustrated by the hydrolysis of p-nitrophenyl acetate, have been also studied. The kinetic results favor a role for histidine 176 not only as a chemical activator of cysteine 149 but also as a hydrogen donor facilitating the formation of tetrahedral intermediates. These results support the hypothesis that histidine 176 plays a similar role during the oxidative phosphorylation of glyceraldehyde 3-phosphate.

Use of site-directed mutagenesis to probe the role of Cys149 in the formation of charge-transfer transition in glyceraldehyde-3-phosphate dehydrogenase

Oligonucleotide-directed mutagenesis was employed to produce mutants of the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) of Escherichia coli and Bacillus stearothermophilus. Three different mutants proteins--His176----Asn, Cys149----Ser, Cys149----Gly--were isolated from one or both of the enzymes. The study of the properties of these mutants has shown that Cys149 is clearly responsible for the information of a charge-transfer transition, named the Racker band, observed during the NAD+ binding to apoGAPDH. This result excludes a similarity between the Racker band and the charge-transfer transition observed following the alkylation of GAPDH by 3-chloroacetyl pyridine-adenine dinucleotide.

Comparison of the lipoprotein profiles obtained from rat, bovine, horse, dog, rabbit and pig serum by a new two-step ultracentrifugal gradient procedure

A new two-step gradient technique has been used in the separation of the different classes of lipoproteins from the serum of cows, horses, dogs, pigs, rabbits and rats. Total lipoproteins were first isolated at d 1.21 then floated through a d 1.006 to d 1.21 gradient. Collection by mean of a gradient fractionator provided directly comparable lipoprotein profiles, allowed the determination of the exact density range of each lipoprotein class and the fraction by fraction analysis of composition. Cholesterol and apo AI recoveries were high. Horse, dog, rabbit and pig exhibited three distinct lipoprotein classes: VLDL, LDL and HDL. LDL were polydisperse in the pig (three components), light in the rabbit and scarce in the horse. In the Sprague-Dawley rat, LDL could not be individualized from HDL. In the bovine, LDL overlapped with a light form of HDL. Although AI was the main apoprotein in the HDL of all species, it ranged in proportion from 35% in the rat to 75% in the bovine. Apo AII was dimeric in the dog, as already known, but also in the horse, rabbit and bovine (MW:17,000) and in the pig MW:13,000). Apo AIV was present in the heavier HDL of all species. Rabbit, horse and pig HDL contained only one species of apo C which, in the pig was identified as apo CII.