Association between post-orthodontic treatment gingival margin alterations and symphysis dimensions

Orthodontic therapy is known to be associated with the development of gingival recession. Several factors may be involved in the causal chain of this outcome, including anatomical and behavioral aspects. Among the anatomical aspects, the dimensions of the mandibular symphysis could play a predisposing role. This study evaluated the relationship between the mandibular symphysis dimensions prior to orthodontic therapy and the development of gingival recessions on the lower incisors and cuspids. Records from 189 orthodontically treated adolescents were evaluated, including radiographs, casts and intra-oral photographs. Symphysis dimensions were assessed by cephalograms. Gingival margin alterations were determined in photographs and cast models. Association between gingival margin alterations and symphysis dimensions was tested by chi-square (α=0.05). Occurrence of gingival recession increased after orthodontic therapy. No association was observed on average of symphysis dimensions and the occurrence of gingival recessions. It may be concluded that pretreatment symphysis dimensions may not be used as predictors of gingival recession after orthodontic therapy.

Lateral cephalometric diagnosis of asymmetry in Angle Class II subdivision compared to Class I and II

INTRODUCTION

Lateral cephalometric radiographs are traditionally required for orthodontic treatment, yet rarely used to assess asymmetries.

OBJECTIVE

The objective of the present study was to use lateral cephalometric radiographs to identify existing skeletal and dentoalveolar morphological alterations in Class II subdivision and to compare them with the existing morphology in Class I and II relationship.

MATERIAL AND METHODS

Ninety initial lateral cephalometric radiographs of male and female Brazilian children aged between 12 to 15 years old were randomly and proportionally divided into three groups: Group 1 (Class I), Group 2 (Class II) and Group 3 (Class II subdivision). Analysis of lateral cephalometric radiographs included angular measurements, horizontal linear measurements and two indexes of asymmetry that were prepared for this study.

RESULTS

In accordance with an Index of Dental Asymmetry (IDA), greater mandibular dental asymmetry was identified in Group 3. An Index of Mandibular Asymmetry (IMA) revealed less skeletal and dental mandibular asymmetry in Group 2, greater skeletal mandibular asymmetry in Group 1, and greater mandibular dental asymmetry in Group 3.

CONCLUSION

Both IDA and IMA revealed greater mandibular dental asymmetry for Group 3 in comparison to Groups 1 and 2. These results are in accordance with those found by other diagnostic methods, showing that lateral cephalometric radiography is an acceptable method to identify existing skeletal and dentoalveolar morphological alterations in malocclusions.

An interview with Peter H. Buschang

Dr. Peter Buschang is regent professor and director of orthodontic research. He has been at Texas A&M University Baylor College of Dentistry since 1988. Dr. Buschang received his PhD in 1980 from the University of Texas at Austin; he spent 3 years as a NIDR postdoctoral fellow at the University of Connecticut, and five years as a FRSQ scholar at the University of Montreal. Every year, Dr. Buschang teaches in 16 different courses, 7 of which he directs. In addition to more than 100 lecture hours per year, he spends hundreds of hours mentoring students. For his teaching efforts, Dr. Buschang was awarded the Robert E. Gaylord Award of Excellence in Orthodontic education in 1992, 1998, 2004, and 2010. He also gives 1-2 day evidence-based CE courses throughout the world. The residents he has taught recently honored him by pledging to fund the Peter H. Buschang Endowed Professorship of Orthodontics. His research interests pertain to craniofacial growth and assessment of treatment effects. Dr. Buschang has been funded regularly over the years by the Medical Research Council of Canada, Fonds de le Recherche en Santé du Québec, the NIH, and the American Association of Orthodontics Foundation. He has mentored over 140 Master's and PhD students, and 49 dental students. Dr. Buschang has published over 250 peer-reviewed articles, 15 book chapters and 198 abstracts. He has given over 150 invited talks and lectures in 14 different countries. For his work with the American Board of Orthodontics, Dr. Buschang was awarded the Earl E. and Wilma S. Shepard Award. Dr. Buschang is the only non-orthodontist ever to have been made an honorary member of both the American Association of Orthodontics (2005) and the Edward H. Angle Society of Orthodontics (2009), the two most prestigious orthodontic groups.

Changes on facial profile in the mixed dentition, from natural growth and induced by Balters' bionator appliance

OBJECTIVE

The purpose of this study was to evaluate the facial profile changes induced by Balters' bionator appliance in Class II division 1 patients, at mixed dentition stage.

METHODS

The sample consisted of 28 pre-pubertal individuals at stages 1 and 2 of skeletal maturation (CVM), which were divided into two groups. The experimental group consisted of 14 individuals (7 boys and 7 girls, initial mean age of 8y12m) which were treated with Balters' bionator appliance for 14.7 months. The effects of treatment were compared to a control group of 14 subjects (7 boys and 7 girls, initial mean age of 8y5m) with Class II malocclusion, division 1, not orthodontically treated, which were followed up for 15.4 months. The statistical analysis was performed using Student's t test, at a significance level of 5%.

RESULTS

The results showed that the Balters' bionator appliance promoted a significant increase on the mentolabial angle, in addition to demonstrating a tendency to reduce the facial skeletal convexity, to restrict the maxillary growth and to increase the nasolabial angle and the lower anterior facial height.

CONCLUSIONS

It can be concluded that the Balters' bionator appliance improved the facial profile of children treated at mixed dentition stage.

Mandibular growth and dentoalveolar development in the treatment of class II, division 1, malocclusion using Balters Bionator according to the skeletal maturation

OBJECTIVE

The purpose of the study was to evaluate the influence of the skeletal maturation in the mandibular and dentoalveolar growth and development during the Class II, division 1, malocclusion correction with Balters bionator.

METHODS

Three groups of children with Class II, division 1, malocclusion were evaluated. Two of them were treated for one year with the bionator of Balters appliance in different skeletal ages (Group 1: 6 children, 7 to 8 years old and Group 2: 10 children, 9 to 10 years old) and the other one was followed without treatment (

CONTROL GROUP

7 children, 8 to 9 years old). Lateral 45 degree cephalometric radiographs were used for the evaluation of the mandibular growth and dentoalveolar development. Tantalum metallic implants were used as fixed and stable references for radiograph superimposition and data acquisition. Student's t test was used in the statistical analysis of the displacement of the points in the condyle, ramus, mandibular base and dental points. One-fixed criteria analysis of variance was used to evaluate group differences (95% of level of significance).

RESULTS

The intragroup evaluation showed that all groups present significant skeletal growth for all points analyzed (1.2 to 3.7 mm), but in an intergroup comparison, the increments of the mandibular growth in the condyle, ramus and mandibular base were not statically different. For the dentoalveolar modifications, the less mature children showed greater labial inclination of the lower incisors (1.86 mm) and the most mature children showed greater first permanent molar extrusion (4.8 mm).

Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

INTRODUCTION

Due to the lack of studies that distinguish between dentoalveolar and basal changes caused by the Thurow appliance, this clinical study, carried out by the School of Dentistry--State University of São Paulo/Araraquara, aimed at assessing the dental and skeletal changes induced by modified Thurow appliance.

METHODS

The sample included an experimental group comprising 13 subjects aged between 7 and 10 years old, with Class II malocclusion and anterior open bite, and a control group comprising 22 subjects similar in age, sex and mandibular plane angle. Maxillary/mandibular, horizontal/vertical, dental/skeletal movements (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6) were assessed, based on 14 landmarks, 8 angles (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB) and 3 linear measures (N-Me, ANS-Me, S-Go).

RESULTS

Treatment caused significantly greater angle decrease between the palatal and the mandibular plane on the experimental group, primarily due to an increase in the palatal plane angle. ANB, SNA and S-N-ANS angles significantly decreased more in patients from the experimental group. PNS was superiorly remodeled. Lower face height (ANS-Me) decreased in the experimental group and increased in the control group.

CONCLUSIONS

The modified Thurow appliance controlled vertical and horizontal displacements of the maxilla, rotated the maxilla and improved open bite malocclusion, decreasing lower facial height.

Procedures adopted by orthodontists for space closure and anchorage control

OBJECTIVE

The aim of this study was to identify the procedures adopted by Brazilian orthodontists in the following situations: extraction space closure, anchorage control in case of necessary anchorage for group A and frequency of skeletal anchorage use, especially in the upper jaw.

METHODS

A questionnaire was sent to the e-mail address of all dentists registered in the Brazilian Federal Council of Dentistry.

RESULTS

The results showed that most Brazilian orthodontists usually perform extraction space closure by means of sliding mechanics. The use of palatal bar, inclusion of second molars in the archwire and space closure performed in two phases are the most used techniques for anchorage control in the upper jaw. The skeletal anchorage is referenced by 36.5% of specialists as a routine practice for the upper arch anchorage.

CONCLUSIONS

There is a wide variety of procedures adopted by Brazilian orthodontists for orthodontic space closure and anchorage control.

Transverse maxillary and mandibular growth during and after Bionator therapy: study with metallic implants

INTRODUCTION: This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. OBJECTIVE: The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. METHODS: Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 = before bionator therapy, T2 = after bionator therapy and T3 = 5.74 years after T2. RESULTS: There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. CONCLUSIONS: During the study period only the anterior maxillary area did not show transverse growth.

Class II malocclusion treatment using high-pull headgear with a splint: a systematic review

OBJECTIVE: To systematically review the scientific evidence pertaining to the effectiveness of high-pull headgear in growing Class II subjects. METHODS: A literature survey was performed by electronic database search. The survey covered the period from January 1966 to December 2008 and used Medical Subject Headings (MeSH). Articles were initially selected based on their titles and abstracts; the full articles were then retrieved. The inclusion criteria included growing subjects between 8 to 15 years of age, Class II malocclusion treatment with high-pull headgear, and a control group with Class II malocclusion. References from selected articles were hand-searched for additional publications. Selected studies were evaluated methodologically. RESULTS: Four articles were selected; none were randomized controlled trials. All of the articles clearly formulated their objectives and used appropriate measures. The studies showed that high-pull headgear treatment improves skeletal and dental relationship, distal displacement of the maxilla, vertical eruption control and upper molars distalization. One of the studies showed a slight clockwise rotation of the palatal plane; the others showed no significant treatment effect. The mandible was not affected by the treatment. CONCLUSION: While there is still a lack of strong evidence demonstrating the effects of high-pull headgear with a splint, other studies indicate that the AP relations improve due to distalization of the maxilla and upper molars, with little or no treatment effects in the mandible. Greater attention to the design should be given to improve the quality of such trials.

Comparison of space analysis performed on plaster vs. digital dental casts applying Tanaka and Johnston's equation

OBJECTIVE: The purpose of this study was to compare dental size measurements, their reproducibility and the application of Tanaka and Johnston regression equation in predicting the size of canines and premolars on plaster and digital dental casts. METHODS: Thirty plaster casts were scanned and digitized. Mesiodistal measurements of the teeth were then performed with a digital caliper on the plaster and digital casts using O3d software system (Widialabs©).The sum of the sizes of the lower incisors was used to obtain predictive values of the sizes of the premolars and canines using the regression equation, and these values were compared with the actual sizes of the teeth. The data were statistically analyzed by applying to the results Pearson's correlation test, Dahlberg's formula, paired t-test and analysis of variance (p<0.05). RESULTS: Excellent intraexaminer agreement was observed in the measurements performed on both dental casts. No random error was present in the measurements obtained with the caliper and systematic error (bias) was more frequent in the digital casts. Space prediction obtained by applying the regression equation was greater than the sum of the canines and premolars on the plaster and digital casts. CONCLUSIONS: Despite an adequate reproducibility of the measurements performed on both casts, most measurements on the digital casts were higher than those on the plaster casts. The predicted space was overestimated in both models and significantly higher in the digital casts.

Rapid palatal expansion: a comparison of two appliances

This study analyzed occlusal radiographs to compare the transverse changes produced in patients treated with rapid maxillary expansion using two types of appliances. The sample consisted of 31 children aged 7 to 10.6 years, of both genders, with posterior cross-bite. Fifteen children were treated with a tooth-borne expander and 16 were treated with a tooth-tissue-borne expander. Occlusal radiographs obtained at treatment onset and at the end of the retention period were digitized. The following variables were measured: intermolar distance (IMD), interapical distance (IApD), interbase distance (IBaD) and interarm distance (IArD). The results revealed increases in all measurements in both groups after rapid maxillary expansion. Comparison between groups revealed that the increases were greater in patients treated with the tooth-borne expander, except for the IArD measurement, which presented the same increase in both groups. Even though the IMD measurements differed between expanders, they were proportional to the activation of the appliances (IBaD). The increase in the IApD measurement was proportionally greater in the group treated with the tooth-borne expander (0.7:1.0) than in that treated with the tooth-tissue-borne expander (0.4:1.0). It was concluded that both appliances had similar effects, although the tooth-tissue-borne expander produced a lesser opening at the apical region of the incisors.

External apical root resorption in retracted incisors

AIM

To evaluate the occurrence of external apical root resorption (EARR) in the incisors after anterior retraction in corrective orthodontic treatment with first premolar extractions and whether it was related with the type of root apex movement and its inclination.

METHOD

The maxillary and mandibular incisors of 22 patients (12 to 25 years of age; 9 males and 13 females) were treated with fixed appliances and premolar extraction. EARR was defined as the difference in root length before and after incisal retraction on periapical radiographs. Distortion of radiographic images and changes due to incisal tipping were controlled for. Pre- and post-incisal retraction lateral cephalometric radiographs established the relationship between EARR and the tipping of the incisors, along with the vertical, horizontal, and total movement of the root apex.

RESULTS

There was significant EARR (1.51 to 2.37 mm) during incisor retraction, but this was not related to the movement or the tipping of the root apex of almost all teeth. It was observed that after the retraction stage, EARR occurred in all evaluated incisors, but it was more significant (P < .05) in the mandibular right lateral incisor.

CONCLUSION

The EARR that did occur was unrelated to movement or tipping of the root apex, except for the vertical root apex movement of the mandibular left central incisor and the inclination of the maxillary right lateral incisor.

Análise de Bolton: uma proposta alternativa para a simplificação de seu uso

INTRODUÇÃO: as discrepâncias entre o tamanho mesiodistal dos dentes superiores e inferiores e seus efeitos sobre a oclusão têm sido relatados há muito tempo. O método proposto por Bolton para o diagnóstico de discrepância de tamanho dentário é, inegavelmente, um dos mais difundidos no meio ortodôntico, devido à sua relativa simplicidade. Entretanto, a aplicação desse método requer cálculos matemáticos e o uso de tabelas que, muitas vezes, inviabilizam a sua utilização durante a avaliação clínica. OBJETIVO: avaliar o método proposto por Wolford, que não requer o uso de tabelas, como alternativa ao método tradicional de Bolton. MÉTODOS: a amostra foi composta por 90 pares de modelos dentários iniciais de pacientes adultos, com diferentes más oclusões. A proporção entre os dentes inferiores e superiores foi calculada para cada paciente, resultando na obtenção de dois índices (a razão total e a razão anterior). Os índices foram obtidos por meio do método originalmente proposto por Bolton e por um método alternativo, composto por duas fórmulas (uma simplificada e a variação da mesma), que foram analisadas separadamente. RESULTADOS: comparadas ao método de Bolton, as fórmulas simplificadas mostraram uma tendência de superestimar as discrepâncias dentárias inferiores (total e anterior), embora em pequena proporção. CONCLUSÕES: ambas as fórmulas do método alternativo podem ser utilizadas em substituição ao método tradicional, uma vez que mostraram diferenças médias menores que 0,58mm quando comparadas ao método de Bolton, não apresentando, portanto, significância clínica.

Avaliação do efeito da expansão rápida da maxila na via aérea superior, por meio da nasofibroscopia: descrição da técnica e relato de caso

A finalidade deste artigo é avaliar o efeito da expansão rápida da maxila (ERM) na via aérea superior. Por intermédio de um caso clínico, será relatado como indivíduos com atresia da maxila e com comprometimento da função naso-respiratória podem beneficiar-se com a ERM. Para entender melhor as alterações morfológicas decorrentes do paciente com problemas respiratórios, deve-se conhecer a anatomia e a fisiologia do sistema respiratório. Entretanto, não se pode esquecer que o tratamento deste paciente é multidisciplinar, envolvendo o ortodontista, otorrinolaringologista e a fonoaudióloga.

Avaliação qualitativa em modelo experimental fotoelástico do sistema de força gerado pela mola "T" centralizada com pré-ativações preconizadas por Burstone

OBJETIVO: avaliar o sistema de forças gerado pela mola T centralizada no espaço interbraquete, com pré-ativação preconizada por Burstone. MÉTODOS: utilizando-se modelos fotoelásticos, a mola T com pré-ativações preconizadas por Burstone, confeccionada com fio retangular de titânio-molibdênio (TMA) de secção 0,017"x 0,025", centralizada e com ativação de 6mm, 3mm e em posição neutra. Para melhor confiabilidade dos resultados, os testes foram repetidos em três modelos igualmente duplicados e confeccionados pelo mesmo operador. Utilizou-se uma distância interbraquetes de 27mm. Para compreensão dos resultados, as franjas foram visualizadas através do polariscópio, fotografadas e analisadas qualitativamente. RESULTADOS: por meio da análise qualitativa da ordem de franjas no modelo fotoelástico, notou-se que, nas extremidades de retração e ancoragem, ambas apresentaram simetria no sistema de força, em toda extensão radicular.

Clinical and microbiological studies of children and adolescents receiving orthodontic treatment

PURPOSE

This case-controlled study examined clinical and microbiological parameters in Brazilian children and adolescents receiving orthodontic treatment using fixed orthodontic appliances or removable orthodontic appliances.

METHODS

The plaque index, gingival index, number of decayed, missing and filled teeth, and probing pocket depth was measured on each fully erupted tooth in 30 patients treated with fixed orthodontic appliances and an equal number of age and sex-matched control subjects. The same parameters were also measured in 18 patients treated with removable orthodontic appliances and an equal number of age and sex-matched control subjects. In the patients treated with fixed orthodontic appliances, subgingival plaque samples were collected from four teeth with orthodontic brackets and from four teeth with orthodontic bands. In the patients with removable appliances, subgingival plaque samples were collected from clasped maxillary permanent first molar teeth and from four unclasped permanent teeth. Samples of unstimulated whole saliva and samples from the dorsal surface of the tongue were also obtained from each subject. Each sample was analyzed for the presence of 19 target bacteria by dot blot. A subset of samples was examined by direct amplification of bacterial nucleic acids.

RESULTS

Compared to their respective age and sex-matched controls, whole mouth means for plaque index and gingival index were significantly elevated in both the fixed and removable orthodontic groups. There was no difference in the DMFT. Subjects with fixed orthodontic appliances had a higher prevalence of each of the target species except for L. fermentum, Neisseriaceae and S. mutans. The prevalence of A. naeslundii and Streptococcus sp. was significantly higher on teeth with orthodontic brackets alone compared to teeth with both orthodontic bands and brackets. Subjects with removable orthodontic appliances had a higher prevalence of A. actinomycetemcomitans, C. rectus, E. corrodens, L. fermentum, Neisseriaceae, and spirochetes. The prevalence of Neisseriaceae was significantly higher on unclasped teeth compared to clasped teeth. There was no difference between sample sites for the target bacteria except for A. actinomycetemcomitans that was detected less frequently in saliva. Orthodontic patients demonstrated higher proportions of gram negative species by direct amplification of nucleic acids including species frequently associated with periodontal disease as well as rarely cultivable or non-cultivable species such as Abiotrophia defectiva, Gemella haemolysans, Granulicatella adiacens, Lautropia sp., Terrahaemophilus aromaticivorans, and TM7 bacterium.

Avaliação do efeito da expansão rápida da maxila no padrão respiratório, por meio da rinomanometria anterior ativa: descrição da técnica e relato de caso

A finalidade deste artigo é avaliar o efeito da expansão rápida da maxila (ERM) no padrão respiratório. Por intermédio de um caso clínico, será relatado como indivíduos com atresia da maxila e problemas respiratórios podem se beneficiar com a expansão rápida da maxila. Outro aspecto que deve-se salientar é como profissionais da área da saúde, principalmente ortodontistas e otorrinolaringologistas, têm à sua disposição exames complementares para o diagnóstico do paciente com "Respiração Bucal"

Avaliação tomográfica no tratamento com Herbst em adulto jovem

INTRODUÇÃO: o aparelho de Herbst destaca-se por manter a mandíbula avançada de modo contínuo. OBJETIVO: analisar, durante 8 meses, o tratamento de um indivíduo com aparelho Herbst por meio de imagens da tomografia Cone-Beam, após o surto de crescimento pubertário (16 anos e 3 meses), portador de má oclusão de Classe II, divisão 1, associada a retrognatismo mandibular. RESULTADOS: os resultados mostraram imagens tomográficas das ATMs que sugerem remodelação do côndilo, fossa glenoide e aumento da via aérea após o tratamento com esse aparelho. CONCLUSÃO: o aparelho de Herbst é uma boa opção no tratamento da má oclusão de Classe II em indivíduos adultos jovens, pois proporciona ao paciente a correção da má oclusão e melhora da estética do perfil.

Estudo qualitativo fotoelástico do sistema de forças gerado pela mola "T" de retração com diferentes pré-ativações

OBJETIVO: avaliar o sistema de forças gerado pela mola T utilizada para fechamento de espaços. MÉTODOS: por meio do método experimental fotoelástico, avaliou-se a mola T utilizada no fechamento de espaços com duas variações de pré-ativação em sua porção apical, sendo uma com 30º e a outra com 45º. As molas foram confeccionadas com fio retangular de titânio-molibdênio (TMA) de secção 0,017" x 0,025", centralizadas no espaço interbraquetes de 27mm e ativadas em 5,0mm, 2,5mm e posição neutra. Para melhor confiabilidade dos resultados, os testes foram repetidos em três modelos fotoelásticos igualmente reproduzidos e confeccionados pelo mesmo operador. Para compreensão dos resultados, as franjas fotoelásticas visualizadas no polariscópio foram fotografadas e analisadas qualitativamente. RESULTADOS: por meio da análise qualitativa da ordem de franjas no modelo fotoelástico, notou-se que, nas extremidades de retração e ancoragem, a mola T com 30º de ativação apical apresentou um acúmulo de energia discretamente maior para o sistema de forças liberado.

In vivo and in vitro study of the shear bond strength of brackets bonded to enamel using halogen or LED light

AIM

To evaluate the shear bond strength in vivo and in vitro of metallic brackets bonded to human teeth with light-curing bonding material, using two types of light-curing units.

METHODS

Sixty human premolars were divided into six groups. In the GI and GII groups, the brackets were directly bonded to volunteers' maxillary and mandibular second premolars on the right and left sides, respectively, of their mouths. In the other groups, the brackets were bonded to extracted first premolars. The polymerization was performed in GI, GIII, and GV with an LED (light-emitting diode) device, while in GII, GIV, and GVI, a halogen light was used. In GI and GII, shear strength tests were conducted using a portable digital dynamometer placed directly in the patients' mouths. The teeth from GIII, GIV, GV, and GVI were stored in distilled water at 37 degrees C for 24 hours. Afterward, they were thermocycled between 5 degrees and 55 degrees C. Then, in GIII and GIV, a Universal Testing Machine was used; in GV and GVI, mechanical tests were performed with a digital dynamometer. The bracket/adhesive failure modes were evaluated with the Adhesive Remnant Index (ARI).

RESULTS

The average values of the shear strengths in MPa were: GI = 3.65; GII = 4.39; GIII = 6.45; GIV = 7.11; GV = 4.67; and GVI = 4.21.

CONCLUSIONS

The type of light-curing unit did not interfere with the results of the mechanical tests in vivo or in vitro. The tests performed with a portable digital device obtained average values that were significantly lower than those performed with the Universal Testing Machine.

Curvature Versus V-Bends in a Group B Titanium T-Loop Spring

Objective: To compare the system of forces acting on curvature and preactivated V-bends in titanium T-loop springs (TTLSs) made of 0.017- × 0.025-inch TMA (titanium molibdenium alloy) wire.

Materials and Methods: Pictures of TTLSs preactivated by curvature and V-bends were inserted in the LOOP software program to design both TTLSs. Symmetry was assured using the program. Both TTLSs used the same amount (length) of wire and had the same angulation between their anterior and posterior extremities when passive. The loops were activated 7 mm, and forces and moments were registered after each 0.5 mm of deactivation. The brackets were at the same height, separated by 23 mm and angulated 0°.

Results: The preactivated curvature TTLS delivered horizontal forces ranging from 34 gF to 456 gF, while the TTLS preactivated by V-bends delivered forces ranging from 54 gF to 517 gF. The forces decreased more (30 gF vs 33 gF) with every 0.5 mm of activation on the preactivated V-bend TTLS than on the preactivated curvature TTLS. Vertical forces were low and clinically insignificant for both TTLSs. The moment to force (MF) ratios were systematically higher on the preactivated curvature than on the preactivated V-bend TTLS (from 5.8 mm to 38.8 mm vs 4.7 mm to 28.3 mm).

Conclusions: Although both loops show symmetrical moments in their anterior and posterior extremities and can be used for group B anchorage, the curvature preactivated TTLS delivers lower horizontal forces and higher MF ratios than the acute preactivated V-bend TTLS.

Rapid maxillary expansion with the Hyrax appliance: an occlusal radiographic evaluation study

AIM

To evaluate, via occlusal radiographs, transversal alterations that result from rapid maxillary expansion with the Hyrax appliance.

METHODS

The sample consisted of 14 children of both genders, in mixed dentition, with unilateral or bilateral posterior crossbite. Occlusal radiographs were taken at the beginning and at the end of maxillary expansion. The following variables were measured: intermolar distance, interincisal distance, incisor interapex distance, interbase distance, interarm distance, and interincisor inclination. The interapex and interbase distances had their radiographic amplification corrected.

RESULTS

A mean opening of 7.65 mm of the expansion screw resulted in an increase of the intermolar distance of 7.40 mm, progressively smaller increases of the interarm distance of the appliance of 6.6 mm, and of the incisor interapex distance of 5.5 mm. The distance between the maxillary incisors increased 1.9 mm, which indicated more posterior than anterior expansion. In addition, some buccal inclination of the molars was found, but the apexes of the incisors opened 1.9 mm less than the intermolar distance. Incisor inclination changed 9.7 degrees as a result of the rapid maxillary expansion therapy.

CONCLUSIONS

Analyzing the occlusal radiographs, the dental arch showed more posterior than anterior opening and a change of 9.72 degrees in incisor angulation as a result of rapid maxillary expansion.

Cutting characteristics of dental diamond burs made with CVD technology

The aim of this study was to determine the cutting ability of chemical vapor deposition (CVD) diamond burs coupled to an ultrasonic dental unit handpiece for minimally invasive cavity preparation. One standard cavity was prepared on the mesial and distal surfaces of 40 extracted human third molars either with cylindrical or with spherical CVD burs. The cutting ability was compared regarding type of substrate (enamel and dentin) and direction of handpiece motion. The morphological characteristics, width and depth of the cavities were analyzed and measured using scanning electron micrographs. Statistical analysis using the Kruskal-Wallis test (p < 0.05) revealed that the width and depth of the cavities were significantly greater when they were prepared on dentin. Wider cavities were prepared when the cylindrical CVD bur was used, and deeper cavities resulted from preparation with the spherical CVD bur. The direction of handpiece motion did not influence the size of the cavities, and the CVD burs produced precise and conservative cutting.