Sweeteners in Orodispersible Films: How Much is too Much?

Four natural sweeteners (sucrose, xylitol, fructose, and isomalt) were selected to examine the influence of their qualities and amounts on the characteristics of orodispersible films. Sodium carboxymethylcellulose (2% w/w) was utilized as the film-forming polymer and 1% w/w glycerol as a plasticizer. Films were produced through the solvent casting method, rendering them suitable for convenient application in community or hospital pharmacy settings. The physicochemical and optical properties of the films were analyzed, and Fourier-transform infrared analysis was carried out. All films exhibited acceptable disintegration time, uniformity of mass, thickness, and optical characteristics, with significant dependence (p<0.05) on both sweetener type and quantity. Disintegration time varied based on the employed method, as well as the characteristics and amount of sweetener. Additionally, all films maintained pH values within the oral cavity range, suggesting no potential irritancy upon administration. Fourier-transform infrared analysis confirmed the formation of the film and demonstrated compatibility between its components.

Comparative study of experimental and DFT calculations for 3-cinnamoyl 4-hydroxycoumarin derivatives

BACKGROUND

Computational research plays an important role in predicting the chemical and physical properties of biologically active compounds important in future structural modifications to improve or modify biological activity.

OBJECTIVE

This research focuses on quantum chemical and spectroscopic investigations properties of synthesized 4-hydroxycoumarin derivatives.

METHODS

Quantum chemical calculations were obtained using B3LYP, HF, and M06-2x level methods with the 6-31++G (d,p) basis set. Afterward, IR, 1H, 13C, UV-Visible experimentally parameters were compared with the results obtained using the B3LYP/6-31+G*(d) basis set of the molecules to be able to characterize the structures.

RESULTS

Based on the quantum chemical calculations compound with acetamido group on the phenyl ring is the most reactive, and compound with nitro substituent is the least reactive and the the strongest electrophile among tested compounds. With the exception of compounds with dimethylamino group, all other compounds have a pronounced tautomer between between OH and C = O group. The calculated and experimental values are in agreement with each other.

CONCLUSION

The molecular structure in the ground state of six 3-cinnamoyl 4-hydroxycoumarin derivatives was optimized using density functional theory. The observed and computed values were compared and it can be concluded that the theoretical results were in good linear agreement with the experimental data.

HPLC method for the determination of thymoquinone in growth cell medium

BACKGROUND

Preclinical drug testing requires in vitro and in vivo assessments that are vital for studying drug pharmacokinetics and toxicity. Distinct factors that play an important role in drug screening, such as hydrophobicity, solubility of the substance and serum protein binding can be challenging by inducing result inconsistencies. Hence, establishing accurate methods to quantify drug concentrations in cell cultures becomes pivotal for reliable and reproducible results important for in vivo dosing predictions.

OBJECTIVE

This research focuses on developing an optimized analytical approach via high-pressure liquid chromatography (HPLC) to determine thymoquinone (TQ) levels in monolayer cell cultures.

METHODS

The method's validation adheres to the International Council for Harmonisation (ICH) guideline M10, ensuring its acceptance and applicability. Using an HPLC system with a Diode Array Detector (DAD), the study fine-tuned various parameters to achieve an efficient separation of TQ. Validation covered specificity, sensitivity, matrix effects, linearity, precision, and accuracy, alongside assessing TQ stability in RPMI-1640 medium.

RESULTS

The HPLC method exhibited remarkable TQ specificity, free from interfering peaks at the analyte retention. Sensitivity analysis at the lower limit of quantification (LLOQ) revealed 5.68% %CV and 98.37% % mean accuracy. Matrix effect evaluation showcased accuracy within 85-115%. Linearity spanned in the concentration range of 2-10 μM with a correlation coefficient (r2) of 0.9993. Precision and accuracy were aligned with acceptance criteria. The proposed method was found to be greener in terms of usage of persistent, bioaccumulative, and toxic chemicals and solvents, corrosive samples, and waste production.

CONCLUSION

The developed HPLC-DAD method emerges as specific, accurate, sensitive, and reliable for TQ determination in cell cultures. It ensures robust TQ quantification, enhancing precise in vitro assessments and dependable dosing predictions for in vivo studies. Further research is advocated to investigate TQ's stability across diverse environmental conditions.

A comprehensive health effects assessment of the use of sanitizers and disinfectants during COVID-19 pandemic: a global survey

COVID-19 has affected all aspects of human life so far. From the outset of the pandemic, preventing the spread of COVID-19 through the observance of health protocols, especially the use of sanitizers and disinfectants was given more attention. Despite the effectiveness of disinfection chemicals in controlling and preventing COVID-19, there are critical concerns about their adverse effects on human health. This study aims to assess the health effects of sanitizers and disinfectants on a global scale. A total of 91,056 participants from 154 countries participated in this cross-sectional study. Information on the use of sanitizers and disinfectants and health was collected using an electronic questionnaire, which was translated into 26 languages via web-based platforms. The findings of this study suggest that detergents, alcohol-based substances, and chlorinated compounds emerged as the most prevalent chemical agents compared to other sanitizers and disinfectants examined. Most frequently reported health issues include skin effects and respiratory effects. The Chi-square test showed a significant association between chlorinated compounds (sodium hypochlorite and per-chlorine) with all possible health effects under investigation (p-value <0.001). Examination of risk factors based on multivariate logistic regression analysis showed that alcohols and alcohols-based materials were associated with skin effects (OR, 1.98; 95%CI, 1.87-2.09), per-chlorine was associated with eye effects (OR, 1.83; 95%CI, 1.74-1.93), and highly likely with itching and throat irritation (OR, 2.00; 95%CI, 1.90-2.11). Furthermore, formaldehyde was associated with a higher prevalence of neurological effects (OR, 2.17; 95%CI, 1.92-2.44). Furthermore, formaldehyde was associated with a higher prevalence of neurological effects (OR, 2.17; 95%CI, 1.92-2.44). The use of sodium hypochlorite and per-chlorine also had a high chance of having respiratory effects. The findings of the current study suggest that health authorities need to implement more awareness programs about the side effects of using sanitizers and disinfectants during viral epidemics especially when they are used or overused.

Rapid chromatographic methods for the identification and determination of chlorophenoxy herbicides

Derivatives of chlorophenoxy carboxylic acids have been the first class of herbicides in continuous use since 1947. The main interest for these substances is due to their evident chronic toxicity and carcinogenic effect. On the other hand, they can cause acute toxicity and have significant role in suicidal attempts. In this paper we have investigated analytical approaches that could be used for rapid identification and determination of chlorophenoxy herbicides in modestly equipped laboratories for the clinical toxicology. Thin layer chromatography on cellulose layer using neutral red as ion pairing reagent gave the best results in separation of different herbicides, making possible visualisation at the daylight without further reagents or equipment. High performance liquid chromatography (HPLC) methods for separation on C8 and C18 phases with and without ion-pairing reagent were compared. It was found that HPLC on C18 phase utilising ion-suppression mode has the best reproducibility, linearity and mass limit of detection suitable for quantification of chlorophenoxy herbicides after acute poisoning.

High performance liquid chromatography in pharmaceutical analyses

In testing the pre-sale procedure the marketing of drugs and their control in the last ten years, high performance liquid chromatographyreplaced numerous spectroscopic methods and gas chromatography in the quantitative and qualitative analysis. In the first period of HPLC application it was thought that it would become a complementary method of gas chromatography, however, today it has nearly completely replaced gas chromatography in pharmaceutical analysis. The application of the liquid mobile phase with the possibility of transformation of mobilized polarity during chromatography and all other modifications of mobile phase depending upon the characteristics of substance which are being tested, is a great advantage in the process of separation in comparison to other methods. The greater choice of stationary phase is the next factor which enables realization of good separation. The separation line is connected to specific and sensitive detector systems, spectrafluorimeter, diode detector, electrochemical detector as other hyphernated systems HPLC-MS and HPLC-NMR, are the basic elements on which is based such wide and effective application of the HPLC method. The purpose high performance liquid chromatography(HPLC) analysis of any drugs is to confirm the identity of a drug and provide quantitative results and also to monitor the progress of the therapy of a disease.1) Measuring presented on the Fig. 1. is chromatogram obtained for the plasma of depressed patients 12 h before oral administration of dexamethasone. It may also be used to further our understanding of the normal and disease process in the human body trough biomedical and therapeutically research during investigation before of the drugs registration. The analyses of drugs and metabolites in biological fluids, particularly plasma, serum or urine is one of the most demanding but one of the most common uses of high performance of liquid chromatography. Blood, plasma or serum contains numerous endogenous compounds often present in concentrations much greater than those of analyte. Analiyte concentrations are often low, and in the case of drugs, the endogenous compounds are sometimes structurally very similar to the drug to be measured. The binding of drugs to the plasma protein also may occur which decreases the amount of free compound that is measured. To undertake the analyses of drugs and metabolites in body fluids the analyst is facet with several problems. The first problem is due to the complex nature of the body fluid, the drugs must be isolated by an extraction technique, which ideally should provide a relatively clean extract, and the separation system must be capable of resolving the drugs of interest from co extractives. All mentioned when we are using high performance liquid chromatography require good selections of detectors, good stationary phase, eluents and adequate program during separation. UV/VIS detector is the most versatile detector used in high performance liquid chromatography it is not always ideal since it is lack of specificity means high resolution of the analyte that may be required. UV detection is preferred since it offers excellent linearity and rapid quantitative analyses can be performed against a single standard of the drug being determined. Diode array and rapid scanning detector are useful for peak identification and monitoring peak purity but they are somewhat less sensitive then single wavelength detectors. In liquid chromatography some components may have a poor UV chromophores if UV detection is being used or be completely retained on the liquid chromatography column. Fluorescence and electrochemical detector are not only considerably more sensitive towed appropriate analytes but also more selective than UV detectors for many compounds. If at all possible fluorescence detectors are sensitive, stable, selective and easy to operate. It is selectivity shows itself in the lack of frontal components observed in plasma extract whereas electrochemical detection is nearly always associated with a major frontal peak than tails considerably. To date, the most sensitive method has been the reductive electrochemical detection and giving the excellent results in the investigation on some classes of drugs. Several high performance liquid chromatography oxidative electrochemical methods have been developed for the analyses of drugs and metabolites in body fluids. Mass spectrometer as specific detector with all variation of ionisation and interface (thermo spray, moving belt etc. ) or liquid chromatography-tandem mass spectrometry2,3,4,5). NMR as selective and specific detector in high performance liquid chromatography today is also in used. The development of a non-aqueous eluent for ion-exchange separation on silica has provided an excellent system which, when used in conjugation with an electrochemical detector, permits the analyses of an extensive range of especially basic drugs and metabolites. New packing materials such as polymeric, base deactivated silica's, pyrolysed carbon and the internal surface packing should offer the improved stability and higher efficiencies for certain classes of the compounds such as basic drugs. Microbore columns should become more accepted since they offer not only improved sensitivity but also a lower solvent consumption and consequently the reduced needs to dispose of noxious solvents. Many analyses of basic drugs are still performed by the same method of the ion-exchange chromatography on unmodified silica columns with an eluent buffered to about pH 9. Neutral or weakly acidic drugs for instance barbiturates can be chromatographed on a reversed phase system whilst acidic drugs for example paracetamol, cannabis are separated either by ion suppression or ion-pair chromatography on a reversed-phase packing material. In micelar liquid chromatography micelar mobile phases in reversed-phase instead of conventional hydro organic mobile phase is used. In micelar liquid chromatography complex electrostatic hydrophobic and steric interactions exist between the solute and both stationary and mobile phases. These enable the effective separation of samples of different nature. The main advantages of the use of a micelar solution in reversed-phase liquid chromatography are the solvent and the lower cost and toxicity, the biodegradability of the solvent and the easy dissolution of analytical samples, that enables the determination of drugs in physiological fluids without the need for previous separation of the proteins present in the samples. Using tetrabutylammonium phosphate as a competing base in the investigation of sulphonamides and heptanes sulfonate as ion pairing reagent. Ion pairing reagent is term used to describe enhanced retention as the result of the addition to the mobile phase of a large ion opposite charge to the molecular ions to be separated. For molecular cations alkyl sulphates or sulfonates are generally utilised.