Materials and Structural Designs toward Motion Artifact-Free Bioelectronics

Bioelectronics encompassing electronic components and circuits for accessing human information play a vital role in real-time and continuous monitoring of biophysiological signals of electrophysiology, mechanical physiology, and electrochemical physiology. However, mechanical noise, particularly motion artifacts, poses a significant challenge in accurately detecting and analyzing target signals. While software-based "postprocessing" methods and signal filtering techniques have been widely employed, challenges such as signal distortion, major requirement of accurate models for classification, power consumption, and data delay inevitably persist. This review presents an overview of noise reduction strategies in bioelectronics, focusing on reducing motion artifacts and improving the signal-to-noise ratio through hardware-based approaches such as "preprocessing". One of the main stress-avoiding strategies is reducing elastic mechanical energies applied to bioelectronics to prevent stress-induced motion artifacts. Various approaches including strain-compliance, strain-resistance, and stress-damping techniques using unique materials and structures have been explored. Future research should optimize materials and structure designs, establish stable processes and measurement methods, and develop techniques for selectively separating and processing overlapping noises. Ultimately, these advancements will contribute to the development of more reliable and effective bioelectronics for healthcare monitoring and diagnostics.

Bionic artificial skin with a fully implantable wireless tactile sensory system for wound healing and restoring skin tactile function

Tactile function is essential for human life as it enables us to recognize texture and respond to external stimuli, including potential threats with sharp objects that may result in punctures or lacerations. Severe skin damage caused by severe burns, skin cancer, chemical accidents, and industrial accidents damage the structure of the skin tissue as well as the nerve system, resulting in permanent tactile sensory dysfunction, which significantly impacts an individual's daily life. Here, we introduce a fully-implantable wireless powered tactile sensory system embedded artificial skin (WTSA), with stable operation, to restore permanently damaged tactile function and promote wound healing for regenerating severely damaged skin. The fabricated WTSA facilitates (i) replacement of severely damaged tactile sensory with broad biocompatibility, (ii) promoting of skin wound healing and regeneration through collagen and fibrin-based artificial skin (CFAS), and (iii) minimization of foreign body reaction via hydrogel coating on neural interface electrodes. Furthermore, the WTSA shows a stable operation as a sensory system as evidenced by the quantitative analysis of leg movement angle and electromyogram (EMG) signals in response to varying intensities of applied pressures.

Passivation effect on Cd0.95Mn0.05Te0.98Se0.02 radiation detection performance

CdTe-based detectors have the problem of Te-rich surface layers caused by Br etching, which is one of fabrication steps. Te-rich layer acts as a trapping center and serves as an additional source of charge carriers, thereby degrading transport property of charge carriers and enriching leakage current on surface of detector. To solve this problem, we introduced sodium hypochlorite (NaOCl) as a passivant, and investigated its effect on Cd0.95Mn0.05Te0.98Se0.02 (CMTS), by analyzing chemical state of surface and its performance. After passivation with NaOCl, the results of X-ray photoelectron spectroscopy (XPS) shows the formation of tellurium oxide and elimination of water on CMTS surface, and CMTS presented enhanced performance with Am-241 radioisotope. Consequently, it is demonstrated that the passivation with NaOCl reduces leakage current, compensates defect, and elevates transport of charge carriers, thereby decreasing charge loss of carriers and improving performance of CMTS detector.

Interaction between epidermal growth factor receptor and C-C motif chemokine receptor 2 in the ovulatory cascade

The epidermal growth factor receptor (EGFR) signaling pathway is one of the main pathways responsible for propagating the luteinizing hormone (LH) signal throughout the cumulus cells and the oocyte. Recently, we have proposed the C-C motif chemokine receptor 2 (CCR2) and its main ligand (monocyte chemoattractant protein-1, MCP1) as novel mediators of the ovulatory cascade. Our previous results demonstrate that the gonadotropins (GNT), amphiregulin (AREG), and prostaglandin E2 (PGE2) stimulation of periovulatory gene mRNA levels occurs, at least in part, through the CCR2/MCP1 pathway, proposing the CCR2 receptor as a novel mediator of the ovulatory cascade in a feline model. For that purpose, feline cumulus-oocyte complexes (COCs) were cultured in the presence or absence of an EGFR inhibitor, recombinant chemokine MCP1, and gonadotropins [as an inducer of cumulus-oocyte expansion (C-OE), and oocyte maturation] to further assess the mRNA expression of periovulatory key genes, C-OE, oocyte nuclear maturation, and steroid hormone production. We observed that MCP1 was able to revert the inhibition of AREG mRNA expression by an EGFR inhibitor within the feline COC. In accordance, the confocal analysis showed that the GNT-stimulated hyaluronic acid (HA) synthesis, blocked by the EGFR inhibitor, was recovered by the addition of recombinant MCP1 in the C-OE culture media. Also, MCP1 was able to revert the inhibition of progesterone (P4) production by EGFR inhibitor in the C-OE culture media. Regarding oocyte nuclear maturation, recombinant MCP1 could also revert the inhibition triggered by the EGFR inhibitor, leading to a recovery in the percentage of metaphase II (MII)-stage oocytes. In conclusion, our results confirm the chemokine receptor CCR2 as a novel intermediate in the ovulatory cascade and demonstrate that the EGFR/AREG and the CCR2/MCP1 signaling pathways play critical roles in regulating feline C-OE and oocyte nuclear maturation, with CCR2/MCP1 signaling pathway being downstream EGFR/AREG pathway within the ovulatory cascade.

Development and evaluation of photon-counting Cd0.875Zn0.125Te0.98Se0.02 detector for measuring bone mineral density

Cadmium zinc telluride (CZT) has been actively researched and developed by researchers in various fields. In medical applications, especially photon-counting, CZT enables improved image quality, multi-material decomposition, and improved dose efficiency. Moreover, band gap engineering and selenium addition on CZT improved electrical, spectroscopic and structural properties, thereby supporting performance of CZT as a photon-counting detector. In this study, it is shown that Cd_0.875Zn_0.125Te_0.98Se_0.02 (CZTS) shows sufficient performance without loss of detection efficiency. We carried out a study involving the application of this CZTS on calculating bone mineral density (BMD) values, because this application has a novelty of new material for BMD sensor which follows the CdTe- or CdZnTe- based BMD detector. Anatomical images from different energy bins contained different information of attenuation although the images were taken in the same region at the same time. Moreover, calculated BMD values had a proper tendency depending on the amount of bone in that region. The final BMD value was 1.1972 g/cm², which is close to the real value of 1.2 g/cm². The introduction with a bone filter and a smaller pixel size will improve the accuracy and precision of photon-counting CZTS detectors for measuring BMD values. However, in this study the CZTS showed the feasibility that a photon-counting CZTS detector can help the measurement of BMD values and the diagnosis of osteoporosis.

Solvent-Assisted Filling of Liquid Metal and Its Selective Dewetting for the Multilayered 3D Interconnect in Stretchable Electronics

As stretchable electronics are rapidly developing and becoming complex, the requirement for stretchable, multilayered, and large-area printed circuit boards (PCBs) is emerging. This demands a stretchable electrode and its vertical interconnect access (via) for 3-dimensional (3D) connectivity between layers. Here, we demonstrate solvent-assisted liquid metal (LM) filling into the submicrometer channel (∼400 nm), including via-hole filling and selective dewetting of LM. We provide the theoretical background of solvent-assisted LM filling and selective dewetting and reveal the osmotic pressure arising from anomalous mass transport phenomena, case II diffusion, which drives negative pressure, the spontaneous pulling of LM into the open channel. Also, we suggest design criteria for the geometry and dimension of LM interconnects to obtain structural stability without dewetting, based on the theoretical and computational background. We demonstrate a simple stretchable near-field communication (NFC) device including transferred micrometer-size light-emitting diodes (LEDs) with only 230 μm to the stretchable liquid metal PCB, without any soldering process. The device operates stably under repetitive stretching and releasing (∼50% uniaxial strain) due to the stable connection through the LM via between the upper and lower layers. Finally, we propose a concept for modular-type stretchable electronics, based on the cohesive liquid nature of LM. As a building block, the functional module can be easily removed from a mainframe, and replaced by another functional module, to suit user demand.

Accelerated Synthetic MRI with Deep Learning-Based Reconstruction for Pediatric Neuroimaging

BACKGROUND AND PURPOSE

Synthetic MR imaging is a time-efficient technique. However, its rather long scan time can be challenging for children. This study aimed to evaluate the clinical feasibility of accelerated synthetic MR imaging with deep learning-based reconstruction in pediatric neuroimaging and to investigate the impact of deep learning-based reconstruction on image quality and quantitative values in synthetic MR imaging.

MATERIALS AND METHODS

This study included 47 children 2.3-14.7 years of age who underwent both standard and accelerated synthetic MR imaging at 3T. The accelerated synthetic MR imaging was reconstructed using a deep learning pipeline. The image quality, lesion detectability, tissue values, and brain volumetry were compared among accelerated deep learning and accelerated and standard synthetic data sets.

RESULTS

The use of deep learning-based reconstruction in the accelerated synthetic scans significantly improved image quality for all contrast weightings (P < .001), resulting in image quality comparable with or superior to that of standard scans. There was no significant difference in lesion detectability between the accelerated deep learning and standard scans (P > .05). The tissue values and brain tissue volumes obtained with accelerated deep learning and the other 2 scans showed excellent agreement and a strong linear relationship (all, R 2 > 0.9). The difference in quantitative values of accelerated scans versus accelerated deep learning scans was very small (tissue values, <0.5%; volumetry, -1.46%-0.83%).

CONCLUSIONS

The use of deep learning-based reconstruction in synthetic MR imaging can reduce scan time by 42% while maintaining image quality and lesion detectability and providing consistent quantitative values. The accelerated deep learning synthetic MR imaging can replace standard synthetic MR imaging in both contrast-weighted and quantitative imaging.

Stretchable and Directly Patternable Double-Layer Structure Electrodes with Complete Coverage

Stretchable electrodes are widely used in next-generation wearable electronics. Recent studies incorporated designs that help rigid electrodes attain stretchability. However, these structures exhibited unsatisfactory charge/signal extraction efficiency because of their low areal fill factor. Additionally, they cannot be photolithographically patterned on polymer substrates because of their low adhesion, requiring additional complicated fabrication steps. We developed photolithographically patternable stretchable electrodes with complete coverage and enhanced charge-extraction efficiency. The electrodes, comprising double layers, included a chemically treated Ag nanowire mesh and Au thin film. The interfacial linker role of polyvinylpyrrolidone chemically strengthened the interfacial bonds, and the reinforced concrete structure of nanowire-embedded metal thin films enhanced the mechanical properties. Therefore, the electrodes provided superior efficiency and stability in capturing physical, electromagnetic, and electrophysiological signals while exceeding the existing stretchable electrode limits. A broad range of applications are foreseen, such as electrocardiogram sensing electrodes, strain sensors, temperature sensors, and antennas.

Cuticular pad-inspired selective frequency damper for nearly dynamic noise-free bioelectronics

Bioelectronics needs to continuously monitor mechanical and electrophysiological signals for patients. However, the signals always include artifacts by patients' unexpected movement (such as walking and respiration under approximately 30 hertz). The current method to remove them is a signal process that uses a bandpass filter, which may cause signal loss. We present an unconventional bandpass filter material-viscoelastic gelatin-chitosan hydrogel damper, inspired by the viscoelastic cuticular pad in a spider-to remove dynamic mechanical noise artifacts selectively. The hydrogel exhibits frequency-dependent phase transition that results in a rubbery state that damps low-frequency noise and a glassy state that transmits the desired high-frequency signals. It serves as an adaptable passfilter that enables the acquisition of high-quality signals from patients while minimizing signal process for advanced bioelectronics.

Increased risk of cardiovascular diseases in patients with chronic rhinosinusitis: a longitudinal follow-up study using a national health screening cohort

BACKGROUND

Chronic rhinosinusitis (CRS) is one of the most common chronic inflammatory diseases and is characterized by sinonasal inflammation that lasts longer than 12 weeks. Whether the effect of chronic inflammation caused by CRS on cardiovascular diseases (CVDs) is similar to its effect on other inflammatory disorders has not been thoroughly evaluated. We aimed to demonstrate whether CRS patients have a higher prevalence of CVDs, including stroke and ischemic heart disease (IHD).

METHODOLOGY

We compared the prevalence of various comorbidities between CRS and control participants through a case-control cohort study from 2002 to 2015 that included 514,866 participants. CRS (n=6,552) and control (n=26,208) participants who were over 40 years old were selected by matching age, sex, income, and area of residence at a 1:4 ratio.

RESULTS

A stratified Cox proportional hazards model was utilized to assess the hazard ratio (HR) of CRS for stroke and IHD. The HRs for stroke and IHD were significantly increased in CRS patients compared to controls after adjusting for obesity, alcohol consumption, smoking, systolic and diastolic blood pressure, fasting blood glucose, total cholesterol, hemoglobin, and Charlson Comorbidity Index (CCI) scores. The HR of stroke was significantly higher in the absence of nasal polyps than in the presence of nasal polyps. The HR of IHD was significantly increased in the CRS group regardless of the presence of nasal polyps.

CONCLUSIONS

This study showed that CRS participants had a significantly higher prevalence of stroke and IHD.

Association between air pollution and chronic rhinosinusitis: a nested case-control study using meteorological data and national health screening cohort data

BACKGROUND

Inconsistent results about the effect of air pollution on chronic rhinosinusitis (CRS) have been reported. This study aimed to evaluate the impact of meteorological conditions/air pollution on the prevalence of CRS in adult Koreans.

METHODOLOGY

The data from the Korean National Health Insurance Service-Health Screening Cohort from 2002 through 2015 were used. A CRS group (defined as ICD-10 codes J32, n=6159) was matched with a control group (n=24,636) in 1:4 ratios by age, sex, income, and region of residence. The meteorological conditions and air pollution data included the daily mean, highest, and lowest temperature (°C), daily temperature range (°C), relative humidity (%), ambient atmospheric pressure (hPa), sunshine duration (hr), and the rainfall (mm), SO2 (ppm), NO2 (ppm), O3 (ppm), CO (ppm), and PM10 (μg/m3) levels before the CRS diagnosis. Crude and adjusted odds ratios (ORs) and 95% confidence intervals (CIs) for CRS were analyzed using logistic regression analyses.

RESULTS

When the NO2 level increased by 0.1 ppm, the odds for CRS increased 5.40 times, and when the CO level increased by 1 ppm and PM10 increased by 10 μg/m3, the odds for CRS decreased 0.75 times and 0.93 times, respectively. Other meteorological conditions, such as the mean/highest/lowest temperature, temperature range, rainfall and other air pollution, such as SO2 and O3, were not statistically significant. NO2 for 90 days before the index date increased the risk of CRS in all subgroups, except for the nasal polyp and older age subgroups.

CONCLUSION

CRS is related to high concentrations of NO2.

Temporal change in the diagnosis and treatment rates of osteoporosis: results from the Korea National Health and Nutrition Examination Survey

To compare the diagnosis andtreatment rates of osteoporosis and diabetes in Korea, a nationwide database was used. The results showed that although osteoporosis management is improving, it is still lower compared with that of diabetes; thus, further efforts are needed in this regard.

INTRODUCTION

This study aimed to re-evaluate the diagnosis and treatment of osteoporosis from the KNHANES 2016-2017 and compare the temporal change of the rate with those of diabetes as another prevalent chronic disease in South Korea.

METHODS

The prevalence of osteoporosis in 2016 was estimated using the previous data classified by age groups (50-59,60-69, and ≥70years) and the 2016 Korean census data. The physician diagnosis and treatment rates of osteoporosis in adults aged ≥50years were estimated using the 2016-2017 KNHANES data. The physician diagnosis and treatment rates of diabetes were evaluated using the KNHANES 2008-2009 and 2016-2017 data.

RESULTS

The estimated physician diagnosisrate of osteoporosis increased from 29.9% in females and 5.8% in males in 2008-2009 to 62.8% in females and 22.8% in males in 2016-2017. The treatment rate for the estimated total number of patients with osteoporosis increased from 14.4% in females and 3.8% in males in 2008-2009 to 32.2% in females and 9.0% in males in 2016-2017. An increasing trend in the estimated treatment rateof physician-diagnosed osteoporosis patients was not observed (48.3% [2008-2009] vs 51.5% [2016-2017] in females; 42.6% [2008-2009] vs 42.2% [2016-2017] in males). The physician diagnosis and treatment rates of diabetes were considerably better and more stable than those of osteoporosis.

CONCLUSION

Osteoporosis management in South Korea is improving but is insufficient compared with diabetes management. More extensive efforts are needed to improve the diagnosis and treatment rates of osteoporosis.

Increased risk of chronic otitis media in chronic rhinosinusitis patients: a longitudinal follow-up study using a national health screening cohort

BACKGROUND

Chronic rhinosinusitis (CRS) and chronic otitis media (COM) share pathophysiological mechanisms such as bacterial infection, biofilm, and persistence of the obstruction state of ventilation routes. However, only a few studies have investigated the relationship between these two diseases nationwide and in the general population. The purpose of this study was to determine whether the incidence of COM in patients with CRS differed from that of a matched control from the national health screening cohort.

METHODS

Data from the Korean Health Insurance Review and Assessment Service-National Patient Samples were collected from 2002 to 2015. Participants who were treated ≥ ≥ ≥2 times and underwent head and neck computed tomography evaluation were selected. A 1:4 matched CRS group (n=8,057) and a control group (n=32,228) were selected. The control group included participants who were never treated with the ICD-10 code J32 from 2002 to 2015. The CRS group included CRS patients with/without nasal polyps.

RESULTS

The incidence of COM was significantly higher in the CRS group than in the control group. In a subgroup analysis, the incidence of COM in all age groups and in men and women was significantly higher in the CRS group than in the control group. More, CRS increased the risk of COM.

CONCLUSIONS

A significant association was observed between CRS and COM. This indicates that CRS patients have a high risk of developing COM.

Noninterference Wearable Strain Sensor: Near-Zero Temperature Coefficient of Resistance Nanoparticle Arrays with Thermal Expansion and Transport Engineering

In this study, non-temperature interference strain gauge sensors, which are only sensitive to strain but not temperature, are developed by engineering the properties and structure from a material perspective. The environmental interference from temperature fluctuations is successfully eliminated by controlling the charge transport in nanoparticles with thermally expandable polymer substrates. Notably, the negative temperature coefficient of resistance (TCR), which originates from the hopping transport in nanoparticle arrays, is compensated by the positive TCR of the effective surface thermal expansion with anchoring effects. This strategy successfully controls the TCR from negative to positive. A near-zero TCR (NZTCR), less than 1.0 × 10^-6 K^-1, is achieved through precisely controlled expansion. Various characterization methods and finite element and transport simulations are conducted to investigate the correlated electrical, mechanical, and thermal properties of the materials and elucidate the compensated NZTCR mechanism. With this strategy, an all-solution-processed, transparent, highly sensitive, and noninterference strain sensor is fabricated with a gauge factor higher than 5000 at 1% strain, as demonstrated by pulse and motion sensing, as well as the noninterference property under variable-temperature conditions. It is envisaged that the sensor developed herein is applicable to multifunctional wearable sensors or e-skins for artificial skin or robots.

Airflow limitation as a risk factor for vascular stiffness

BACKGROUND: Cardiovascular disease is one of the main causes of mortality in patients with chronic obstructive pulmonary disease (COPD), and atherosclerosis is a cause of cardiac comorbidities in COPD. However, it is not clear whether airflow limitation is associated with atherosclerosis irrespective of smoking.OBJECTIVE: To investigate whether airflow limitation is independently associated with vascular stiffness.METHODS: We enrolled 18 893 participants (male 70.5%; mean age 47.5 ± 9.8 years; never smokers 44.2%) who underwent spirometry and brachial-ankle pulse wave velocity (baPWV) as part of a standard health examination at Ajou University Hospital, Suwon, South Korea, from January 2010 to December 2015.We defined vascular peripheral atherosclerosis as baPWV ≥ 1400 cm/s and airflow limitation as pre-bronchodilator ratio of forced expiratory volume in 1 sec (FEV₁) to forced vital capacity (FVC) <70%.RESULTS: Mean baPWV was higher in subjects with airflow limitation (1477.6 ± 331.7 cm/sec, n = 638) than in those without airflow limitation (1344.1 ± 231.8 cm/sec, n = 18255, P < 0.001). In multivariate logistic regression analysis, the following were independent predictors associated with peripheral atherosclerosis (P < 0.05): age, male sex, fasting serum glucose, mean blood pressure, serum leukocyte count, serum low density lipoprotein level and FEV₁.CONCLUSION: Airflow limitation was an independent predictor of vascular stiffness irrespective of smoking history, which suggests that airflow limitation is linked with atherosclerosis.

Abstract SP111: Interpreting reports

Although next generation sequencing (NGS) has become commonplace for breast and other cancers, interpretation of reports remains a challenging unmet need. This is further confounded by the therapeutic importance of understanding and interpreting whether pathogenic variants/mutations are germline versus somatic. Here we will discuss and provide examples of how molecular tumor boards can aid clinicians in providing interpretation of NGS results for optimal patient benefit.

Citation Format: B Park. Interpreting reports [abstract]. In: Proceedings of the 2020 San Antonio Breast Cancer Virtual Symposium; 2020 Dec 8-11; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2021;81(4 Suppl):Abstract nr SP111.

3D wide-field multispectral photoacoustic imaging of human melanomas in vivo: a pilot study

BACKGROUND

The Breslow depth is an important parameter to determine the excision margin and prognosis of melanoma. However, it is difficult to accurately determine the actual Breslow depth before surgery using the existing ocular micrometer and biopsy technique.

OBJECTIVES

To evaluate the use of 3D wide-field multispectral photoacoustic imaging to non-invasively measure depth and outline the boundary of melanomas for optimal surgical margin selection.

METHODS

Six melanoma patients were examined in vivo using the 3D multispectral photoacoustic imaging system. For five cases of melanomas (one in situ, three nodular, and one acral lentiginous type melanoma), the spectrally unmixed photoacoustic depths were calculated and compared against histopathological depths.

RESULTS

Spectrally unmixed photoacoustic depths and histopathological depths match well within a mean absolute error of 0.36 mm. In particular, the measured minimum and maximum depths in the in situ and nodular type of melanoma were 0.6 and 9.1 mm, respectively. In the 3D photoacoustic image of one metastatic melanoma, feeding vessels were visualized in the melanoma, suggesting the neovascularization around the tumour.

CONCLUSIONS

The 3D multispectral photoacoustic imaging not only provides well-measured depth and sizes of various types of melanomas, it also visualizes the metastatic type of melanoma. Obtaining accurate depth and boundary information of melanoma before surgery would play a useful role in the complete excision of melanoma during surgery.

Blindness increases the risk for hip fracture and vertebral fracture but not the risk for distal radius fracture: a longitudinal follow-up study using a national sample cohort

The risks for hip fracture and vertebral fracture, but not the risk for distal radius fracture, were significantly higher in the blindness group than in the control group with a maximum 12-year follow-up.

PURPOSE

To evaluate the influence of visual impairment on the risk for osteoporotic fractures at common sites: hip, thoracic/lumbar vertebra, and distal radius.

METHODS

This longitudinal follow-up study used a database of a national sample cohort from 2002 to 2013 provided by the Korean National Health Insurance Service. Of a total of 1,125,691 subjects, 3918 patients with visual impairment and age ≥ 50 years were enrolled in a 1:4 ratio; 15,672 control participants were matched for age, sex, income, and region of residence. Stratified Cox proportional-hazards models were used to evaluate the crude and adjusted (for steroid medication, rheumatoid arthritis, depression, osteoporosis, diabetes mellitus, and stroke history) hazard ratios (HRs) for each fracture site. Fracture diagnoses were based on the ICD-10 codes: hip fracture (S720, S721, S722), vertebral fracture (S220, S320), and distal radius fracture (S525).

RESULTS

The HRs for hip and vertebral fracture were significantly higher in the blindness group (adjusted HR = 2.46, p < 0.001 for hip fracture; adjusted HR = 1.42, p = 0.020 for thoracic/lumbar vertebral fracture) than in the matched control group. However, the HR for distal radius fracture was not higher in the blindness group. The HRs for all three fracture sites were not significantly higher in the non-blindness visual impairment group after adjustment.

CONCLUSION

The risks for hip fracture and vertebral fracture were significantly higher in the blindness group. However, the risk for distal radius fracture was not related to visual impairment including blindness.

Robot-assisted minimally invasive esophagectomy (RAMIE): tips and tricks from the bedside assistant view-expert experiences

The role of bedside assistants in robot-assisted minimally invasive esophagectomy is important. It includes knowledge of the procedure, knowledge of the da Vinci Surgical System, skills in laparoscopy, and good communicative skills. An experienced bedside assistant will likely improve efficiency and safety of robot-assisted minimally invasive esophagectomy.

The effects of foraminotomy and intervertebral distraction on the volume of the lumbosacral intervertebral neurovascular foramen: An ex vivo study

Degenerative lumbosacral stenosis in dogs frequently involves L7-S1 foraminal stenosis and L7 nerve root compression. Surgical techniques to decompress the L7 nerve root include foraminotomy and intervertebral distraction. The objective of this study was to compare the effect of foraminotomy and intervertebral distraction on the total, cranial, and caudal compartmental volumes of the L7-S1 intervertebral neurovascular foramen (NF). CT images were obtained from eight canine lumbosacral (L5-CD1) specimens in the following sequential conditions: native spine (1), after dorsal laminectomy and partial discectomy of L7-S1 (2), after L7-S1 foraminotomy (3), after distraction with an interbody cage between L7 and S1 (4), after cage distraction stabilized with pedicle screw-rod fixation in neutral (5) and flexed position (6). The volume of the complete NF and its cranial and caudal subcompartments were calculated using the CT images and statistically compared between conditions. P < 0.05 was considered statistically significant. The volume of the complete NF was significantly increased after foraminotomy (mean ± standard deviation (146.8 ± 26.5%, P < 0.01) and after distraction (Condition 4, 121.0 ± 19.1%; Condition 5, 116.6 ± 29.3 %; Condition 6, 119.0 ± 21.8 %; P = 0.01) with no difference between the distraction conditions. Foraminotomy induced a significantly larger increase in total NF volume compared to distraction. Foraminotomy, but not distraction, induced a significant increase in volume of the cranial subcompartment (158.2 ± 33.2 %; P < 0.01). Foraminotomy is more effective in increasing the foraminal volume and especially the cranial subcompartment, which is where the L7 nerve root traverses the NF. Hence, foraminotomy may be more effective in decompressing the L7 nerve root.

Long-term exposure to air pollution and the risk of non-lung cancer: a meta-analysis of observational studies

AIMS

Several meta-analyses of observational studies report a long-term correlation between air pollution and the risk of cancer, particularly lung carcinoma. The aim of this study was to review and quantify evidence for an association between air pollution and the risk of developing non-lung cancers.

METHODS

We searched PubMed, EMBASE, Cochrane Library, and the reference lists of the included studies as well as those recorded in previous meta-analyses conducted before January 2019. A random-effects model was used to derive overall risk estimates per pollutant.

RESULTS

A total of 20 studies, including 5 case-control and 15 prospective cohort studies, were used in the final analysis. The risk of developing non-lung cancer was 1.09 (95% confidence interval (CI): 1.01-1.18, I² = 72.9%) per NO₂ increases of 10 µg/m³. There was also a significant association between exposure to PM_2.5 and PM₁₀ and the risk of non-lung cancer when the male and female populations were combined (pooled odds ratio/relative risk (OR/RR) = 1.22, 95% CI: 1.11-1.34; I² = 0.0% and pooled OR/RR = 1.26, 95% CI: 1.05-1.52; I² = 43.9%, respectively). Regarding the type of cancer, significant harmful effects of PM_2.5 were observed for liver cancer populations (pooled OR/RR = 1.21, 95% CI: 1.10-1.32; I² = 0.0%). Different types of cancer were positively associated with the incidence of non-lung cancer and PM₁₀ in the random-effect meta-regression analysis.

CONCLUSIONS

Long-term exposure to air pollutants appears to be associated with an increased risk of non-lung cancer. Care should be taken in interpretation, because the results for specific cancers were restricted.

Recurrent hyperactive ESR1 fusion proteins in endocrine therapy-resistant breast cancer

Background

Estrogen receptor-positive (ER-positive) metastatic breast cancer is often intractable due to endocrine therapy resistance. Although ESR1 promoter switching events have been associated with endocrine-therapy resistance, recurrent ESR1 fusion proteins have yet to be identified in advanced breast cancer.

Patients and methods

To identify genomic structural rearrangements (REs) including gene fusions in acquired resistance, we undertook a multimodal sequencing effort in three breast cancer patient cohorts: (i) mate-pair and/or RNAseq in 6 patient-matched primary-metastatic tumors and 51 metastases, (ii) high coverage (>500×) comprehensive genomic profiling of 287-395 cancer-related genes across 9542 solid tumors (5216 from metastatic disease), and (iii) ultra-high coverage (>5000×) genomic profiling of 62 cancer-related genes in 254 ctDNA samples. In addition to traditional gene fusion detection methods (i.e. discordant reads, split reads), ESR1 REs were detected from targeted sequencing data by applying a novel algorithm (copyshift) that identifies major copy number shifts at rearrangement hotspots.

Results

We identify 88 ESR1 REs across 83 unique patients with direct confirmation of 9 ESR1 fusion proteins (including 2 via immunoblot). ESR1 REs are highly enriched in ER-positive, metastatic disease and co-occur with known ESR1 missense alterations, suggestive of polyclonal resistance. Importantly, all fusions result from a breakpoint in or near ESR1 intron 6 and therefore lack an intact ligand binding domain (LBD). In vitro characterization of three fusions reveals ligand-independence and hyperactivity dependent upon the 3' partner gene. Our lower-bound estimate of ESR1 fusions is at least 1% of metastatic solid breast cancers, the prevalence in ctDNA is at least 10× enriched. We postulate this enrichment may represent secondary resistance to more aggressive endocrine therapies applied to patients with ESR1 LBD missense alterations.

Conclusions

Collectively, these data indicate that N-terminal ESR1 fusions involving exons 6-7 are a recurrent driver of endocrine therapy resistance and are impervious to ER-targeted therapies.

Stretchable, Patch-Type Calorie-Expenditure Measurement Device Based on Pop-Up Shaped Nanoscale Crack-Based Sensor

Demands for precise health information tracking techniques are increasing, especially for daily dietry requirements to prevent obesity, diabetes, etc. Many commercially available sensors that detect dynamic motions of the body lack accuracy, while novel strain sensors at the research level mostly lack the capability to analyze measurements in real life conditions. Here, a stretchable, patch-type calorie expenditure measurement system is demonstrated that integrates an ultrasensitive crack-based strain sensor and Bluetooth-enabled wireless communication circuit to offer both accurate measurements and practical diagnosis of motion. The crack-based strain gauge transformed into a pop-up-shaped structure provides reliable measurements and broad range of strain (≈100%). Combined with the stretchable analysis circuit, the skin attachable tool translates variation of the knee flexion angle into calorie expenditure amount, using relative resistance change (R/R₀ ) data from the flexible sensor. As signals from the knee joint angular movement translates velocity and walking/running behavior, the total amount of calorie expenditure is accurately analyzed. Finally, theoretical, experimental, and simulation analysis of signal stability, dynamic noises, and calorie expenditure calculation obtained from the device during exercise are demonstrated. For further applications, the devices are expected to be used in broader range of dynamic motion of the body for diagnosis of abnormalities and for rehabilitation.

Controllable Configuration of Sensing Band in a Pressure Sensor by Lenticular Pattern Deformation on Designated Electrodes

Resistive-type pressure sensor, which are mainly utilized in industry, are easy to manufacture and are not significantly affected by external electromagnetic fields, unlike capacitive type. However, the produce signal is not linear, and it is also difficult to measure a wide range of pressures using such a sensor. Therefore, before being utilized, the extracted nonlinear data from them need to be processed by. A resistive sensor that is capable of measuring a wide range of pressure of up to 4 MPa with constant linearity is presented. Moreover it can selectively control the sensing pressure band, or act as an on/off switch, without the need for any additional computer processing.

Bioinspired Electronics for Artificial Sensory Systems

Humans have a myriad of sensory receptors in different sense organs that form the five traditionally recognized senses of sight, hearing, smell, taste, and touch. These receptors detect diverse stimuli originating from the world and turn them into brain-interpretable electrical impulses for sensory cognitive processing, enabling us to communicate and socialize. Developments in biologically inspired electronics have led to the demonstration of a wide range of electronic sensors in all five traditional categories, with the potential to impact a broad spectrum of applications. Here, recent advances in bioinspired electronics that can function as potential artificial sensory systems, including prosthesis and humanoid robots are reviewed. The mechanisms and demonstrations in mimicking biological sensory systems are individually discussed and the remaining future challenges that must be solved for their versatile use are analyzed. Recent progress in bioinspired electronic sensors shows that the five traditional senses are successfully mimicked using novel electronic components and the performance regarding sensitivity, selectivity, and accuracy have improved to levels that outperform human sensory organs. Finally, neural interfacing techniques for connecting artificial sensors to the brain are discussed.

Efficacy and safety of transarterial chemoembolisation with cone-beam CT in patients with hepatocellular carcinoma within the Milan criteria: a retrospective cohort study

AIM

To compare the therapeutic efficacy and safety of transarterial chemoembolisation (TACE) for hepatocellular carcinoma (HCC) within the Milan criteria with or without the use of cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

Patients with HCC within the Milan criteria who underwent conventional angiography-guided TACE (Angio-TACE group: 58 patients from January 2010 to December 2011) were compared with those who underwent CBCT-guided TACE (CBCT-TACE group: 55 patients from January 2013 to December 2014). Local progression-free survival (LPFS), progression-free survival (PFS), and overall survival (OS) were compared. Adverse events after TACE were also investigated.

RESULTS

Baseline characteristics were balanced between the two groups. LPFS was significantly longer in the CBCT-TACE group than in the Angio-TACE group (median: not reached for 36 versus 19.2 months, respectively; Log-rank p=0.029). In multivariable Cox regression analysis, CBCT guidance had a significantly lower risk of local progression or death (adjusted hazard ratio: 0.585; 95% confidence interval, 0.344-0.995; p=0.048); however, there was no significant difference in PFS (3-year PFS: 15.9% versus 26.8%, respectively; p=0.122) or OS (3-year OS: 85% versus 88.2%, respectively; p=0.761) between the Angio-TACE and CBCT-TACE groups. Post-embolisation syndrome occurred significantly less frequently in the CBCT-TACE group (p=0.002).

CONCLUSION

CBCT-guided TACE could improve local tumour control for HCC within Milan criteria and showed fewer cases of post-embolisation syndrome.