Microplastics attenuation from surface water to drinking water: Impact of treatment and managed aquifer recharge - and identification uncertainties

River water can be used to recharge aquifers exploited for drinking water production. Several recent studies reported microplastics (MPs) in river water, and therefore, the potential contamination of groundwater by MPs is a growing concern among stakeholders and citizens. In this research, we investigate the fate of MPs (> 20 μm) along six different stages of a major Managed Aquifer Recharge (MAR)-water supply system in Switzerland. About 20 l of water were filtered using steel meshes at each location in triplicates. In the laboratory, MPs deposited on the anodisc filters were identified using Focal Plane Array (FPA) micro-Fourier-Transform-InfraRed (μFTIR) spectroscopy. The obtained hyperspectral data were processed using the imaging software Microplastics Finder for MPs identification and classification. Our results revealed a 20-fold decrease in MPs concentration from the Rhine River bed water (112 ± 27.4 MPs/l) to after the coagulation, flocculation and sedimentation (5.5 ± 2.2 MPs/l), a further 3-fold decrease to after the sand-filtration system (1.8 ± 0.9 MPs/l), corresponding to an overall removal efficiency of 98.4 %. The MPs concentrations remained low following MAR (2.7 ± 0.7 MPs/l) through a Quaternary gravel aquifer. Activated carbon filters did not substantially further reduce MPs concentrations. The percentage of fragments (≈95 %) prevailed over fibers (≈5 %) at all locations, with fibers being longer and more abundant in the river water. Overall, this study demonstrates the effectiveness of the treatment systems to remove MPs larger than 20 μm. Finally, we calculated an uncertainty in MPs concentrations of one order of magnitude depending on the user-defined parameters inside the MPs identification and classification model. The Quality Assurance/Quality Control approach followed during laboratory analysis highlighted an accumulation of surrogate particles at the edges of the disc, which would have an impact for MPs number upscaling.

Combined method of 3H/3He apparent age and on-site helium analysis to identify groundwater flow processes and transport of perchloroethylene (PCE) in an urban area

Urban groundwater management requires a thorough and robust scientific understanding of flow and transport processes. ³H/³He apparent ages have been shown to efficiently help provide important groundwater-related information. However, this type of analysis is expensive as well as labor- and time-intensive, and hence limits the number of potential sampling locations. To overcome this limitation, we established an inter-relationship between ³H/³He apparent groundwater ages and ⁴He concentrations analyzed in the field with a newly developed portable gas equilibrium membrane inlet mass spectrometer (GE-MIMS) system, and demonstrated that the results of the simpler GE-MIMS system are an accurate and reliable alternative to sophisticated laboratory based analyses. The combined use of ³H/³He lab-based ages and predicted ages from the ³H/³He-⁴He age relationship opens new opportunities for site characterization, and reveals insights into the conceptual understanding of groundwater systems. For our study site, we combined groundwater ages with hydrochemical data, water isotopes (¹⁸O and ²H), and perchloroethylene (PCE) concentrations (1) to identify spatial inter-aquifer mixing between artificially infiltrated groundwater and water originating from regional flow paths and (2) to explain the spatial differences in PCE contamination within the observed groundwater system. Overall, low PCE concentrations and young ages occur when the fraction of artificially infiltrated water is high. The results obtained from the age distribution analysis are strongly supported by the information gained from the isotopic and hydrochemical data. Moreover, for some wells, fault-induced aquifer connectivity is identified as a preferential flow path for the transport of older groundwater, leading to elevated PCE concentrations.

A global-scale dataset of direct natural groundwater recharge rates: A review of variables, processes and relationships

Groundwater recharge indicates the existence of renewable groundwater resources and is therefore an important component in sustainability studies. However, recharge is also one of the least understood, largely because it varies in space and time and is difficult to measure directly. For most studies, only a relatively small number of measurements is available, which hampers a comprehensive understanding of processes driving recharge and the validation of hydrogeological model formulations for small- and large-scale applications. We present a new global recharge dataset encompassing >5000 locations. In order to gain insights into recharge processes, we provide a systematic analysis between the dataset and other global-scale datasets, such as climatic or soil-related parameters. Precipitation rates and seasonality in temperature and precipitation were identified as the most important variables in predicting recharge. The high dependency of recharge on climate indicates its sensitivity to climate change. We also show that vegetation and soil structure have an explanatory power for recharge. Since these conditions can be highly variable, recharge estimates based only on climatic parameters may be misleading. The freely available dataset offers diverse possibilities to study recharge processes from a variety of perspectives. By noting the existing gaps in understanding, we hope to encourage the community to initiate new research into recharge processes and subsequently make recharge data available to improve recharge predictions.

Pathline Density Distributions in a Null-Space Monte Carlo Approach to Assess Groundwater Pathways

A null-space Monte-Carlo (NSMC) approach was applied to account for uncertainty in the calibration of the hydraulic conductivity (K) field for a three-dimensional groundwater flow model of a major water supply system in Switzerland. The approach generates different parameter realizations of the K field using the pilot point methodology. Subsequently, particle tracking (PT) was applied to each calibrated model, and the resulting particles are interpreted as the spatial pathline density distribution of multiple sources. The adopted approach offers advantages over classical PT which does not provide a means for treating uncertainty originating from the incomplete description of subsurface heterogeneity. Uncertainty in the K field is shown to strongly influence the spatial pathline distribution. Pathline spreading is particularly evident in locations where the information content of the head observations does not sufficiently constrain the estimated parameters. Despite the predictive uncertainty, the pumped drinking water at the study site is most likely dominated by artificially-infiltrated groundwater originating from the local infiltration canals. The model suggests that within the well field, the central pumping wells could be extracting regional groundwater, although the probability is relatively low. Nevertheless, a rigorous uncertainty assessment is still required since only a few realizations resulted in flow paths that support the field observations. Model results should therefore not be based on only one model realization; rather, an uncertainty analysis should be carried out to provide a sufficiently large suite of equally probable simulations that include all potential sources and pathways.

A review of threats to groundwater quality in the anthropocene

Awareness concerning sustainable groundwater consumption under the context of land use and climate change is gaining traction, raising the bar for adequate understanding of the complexities of natural and anthropogenic processes and how they affect groundwater quality. The heterogeneous characteristics of aquifers have hampered comprehensive source, transport and contaminant identification. As questions remain about the behavior and prediction of well-known groundwater contaminants, new concerns around emerging contaminants are on the increase. This review highlights some of the key contaminants that originate from anthropogenic activities, organized based on land use categories namely agricultural, urban and industrial. It further highlights the extensive overlap, in terms of both provenance as well as contaminant type, between the different land use sectors. A selection of case studies from literature that describe the continued concern of established contaminants, as well as new and emerging compounds, are presented to illustrate the many qualitative threats to global groundwater resources. In some cases, the risk of groundwater contamination lacks adequate gravity, while in others the underlying physical and societal processes are not fully understood and activities may commence without adequately considering potential impacts. In the agricultural context, the historic and current application of fertilizers and plant protectants, use of veterinary pharmaceuticals and hormones, strives to safeguard the growing food demands. In the context of a sprawling urban environment, waste, human pharmaceuticals, and urban pesticide outputs are increasing, with adequate runoff and sanitation infrastructure often lagging. Finally, industrial activities are associated with accidental leaks and spills, while the large-scale storage of industrial byproducts has led to legacy contaminants such as those stemming from raw mineral extraction. With this review paper, we aim to underscore the need for transdisciplinary research, along with transboundary communication, using sound science and adaptive policy and management practice in order to procure sustainable groundwater quality.

Characterization of a managed aquifer recharge system using multiple tracers

Knowledge about the residence times of artificially infiltrated water into an aquifer and the resulting flow paths is essential to developing groundwater-management schemes. To obtain this knowledge, a variety of tracers can be used to study residence times and gain information about subsurface processes. Although a variety of tracers exists, their interpretation can differ considerably due to subsurface heterogeneity, underlying assumptions, and sampling and analysis limitations. The current study systematically assesses information gained from seven different tracers during a pumping experiment at a site where drinking water is extracted from an aquifer close to contaminated areas and where groundwater is artificially recharged by infiltrating surface water. We demonstrate that the groundwater residence times estimated using dye and heat tracers are comparable when the thermal retardation for the heat tracer is considered. Furthermore, major ions, acesulfame, and stable isotopes (δ²H and δ¹⁸O) show that mixing of infiltrated water and groundwater coming from the regional flow path occurred and a vertical stratification of the flow system exist. Based on the concentration patterns of dissolved gases (He, Ar, Kr, N₂, and O₂) and chlorinated solvents (e.g., tetrachloroethene), three temporal phases are observed in the ratio between infiltrated water and regional groundwater during the pumping experiment. Variability in this ratio is significantly related to changes in the pumping and infiltration rates. During constant pumping rates, more infiltrated water was extracted, which led to a higher dilution of the regional groundwater. An infiltration interruption caused however, the ratio to change and more regional groundwater is extracted, which led to an increase in all concentrations. The obtained results are discussed for each tracer considered and its strengths and limitations are illustrated. Overall, it is demonstrated that aquifer heterogeneity and various subsurface processes necessitate application of multiple tracers to quantify uncertainty when identifying flow processes.

Estimating the spatial distribution of artificial groundwater recharge using multiple tracers

Stable isotopes of water, organic micropollutants and hydrochemistry data are powerful tools for identifying different water types in areas where knowledge of the spatial distribution of different groundwater is critical for water resource management. An important question is how the assessments change if only one or a subset of these tracers is used. In this study, we estimate spatial artificial infiltration along an infiltration system with stage-discharge relationships and classify different water types based on the mentioned hydrochemistry data for a drinking water production area in Switzerland. Managed aquifer recharge via surface water that feeds into the aquifer creates a hydraulic barrier between contaminated groundwater and drinking water wells. We systematically compare the information from the aforementioned tracers and illustrate differences in distribution and mixing ratios. Despite uncertainties in the mixing ratios, we found that the overall spatial distribution of artificial infiltration is very similar for all the tracers. The highest infiltration occurred in the eastern part of the infiltration system, whereas infiltration in the western part was the lowest. More balanced infiltration within the infiltration system could cause the elevated groundwater mound to be distributed more evenly, preventing the natural inflow of contaminated groundwater. Dedicated to Professor Peter Fritz on the occasion of his 80th birthday.