1
|
Lv J, Thangavel G, Xin Y, Gao D, Poh WC, Chen S, Lee PS. Printed sustainable elastomeric conductor for soft electronics. Nat Commun 2023; 14:7132. [PMID: 37932285 PMCID: PMC10628110 DOI: 10.1038/s41467-023-42838-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2023] [Accepted: 10/24/2023] [Indexed: 11/08/2023] Open
Abstract
The widespread adoption of renewable and sustainable elastomers in stretchable electronics has been impeded by challenges in their fabrication and lacklustre performance. Here, we realize a printed sustainable stretchable conductor with superior electrical performance by synthesizing sustainable and recyclable vegetable oil polyurethane (VegPU) elastomeric binder and developing a solution sintering method for their composites with Ag flakes. The binder impedes the propagation of cracks through its porous network, while the solution sintering reaction reduces the resistance increment upon stretching, resulting in high stretchability (350%), superior conductivity (12833 S cm-1), and low hysteresis (0.333) after 100% cyclic stretching. The sustainable conductor was used to print durable and stretchable impedance sensors for non-obstructive detection of fruit maturity in food sensing technology. The combination of sustainable materials and strategies for realizing high-performance stretchable conductors provides a roadmap for the development of sustainable stretchable electronics.
Collapse
Affiliation(s)
- Jian Lv
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise, Singapore, 138602, Singapore
- Frontier Institute of Science and Technology, State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, 710049, Xi'an, China
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore
- Advanced Materials Research Center, Technology Innovation Institute (TII), Masdar City, Abu Dhabi, P.O. Box 9639, United Arab Emirates
| | - Yangyang Xin
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise, Singapore, 138602, Singapore
| | - Dace Gao
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore
| | - Wei Church Poh
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore
| | - Shaohua Chen
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50, Nanyang Avenue, Singapore, 639798, Singapore.
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise, Singapore, 138602, Singapore.
| |
Collapse
|
2
|
Bark H, Thangavel G, Liu RJ, Chua DHC, Lee PS. Effective Surface Modification of 2D MXene toward Thermal Energy Conversion and Management. Small Methods 2023; 7:e2300077. [PMID: 37069766 DOI: 10.1002/smtd.202300077] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/19/2023] [Revised: 03/17/2023] [Indexed: 06/19/2023]
Abstract
Thermal energy management is a crucial aspect of many research developments, such as hybrid and soft electronics, aerospace, and electric vehicles. The selection of materials is of critical importance in these applications to manage thermal energy effectively. From this perspective, MXene, a new type of 2D material, has attracted considerable attention in thermal energy management, including thermal conduction and conversion, owing to its unique electrical and thermal properties. However, tailored surface modification of 2D MXenes is required to meet the application requirements or overcome specific limitations. Herein, a comprehensive review of surface modification of 2D MXenes for thermal energy management is discussed. First, this work discusses the current progress in the surface modification of 2D MXenes, including termination with functional groups, small-molecule organic compound functionalization, and polymer modification and composites. Subsequently, an in situ analysis of surface-modified 2D MXenes is presented. This is followed by an overview of the recent progress in the thermal energy management of 2D MXenes and their composites, such as Joule heating, heat dissipation, thermoelectric energy conversion, and photothermal conversion. Finally, some challenges facing the application of 2D MXenes are discussed, and an outlook on surface-modified 2D MXenes is provided.
Collapse
Affiliation(s)
- Hyunwoo Bark
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Rui Jun Liu
- Department of Materials Sciences and Engineering, National University of Singapore, Singapore, 117575, Singapore
| | - Daniel H C Chua
- Department of Materials Sciences and Engineering, National University of Singapore, Singapore, 117575, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| |
Collapse
|
3
|
Jiang F, Thangavel G, Zhou X, Adit G, Fu H, Lv J, Zhan L, Zhang Y, Lee PS. Ferroelectric Modulation in Flexible Lead-Free Perovskite Schottky Direct-Current Nanogenerator for Capsule-Like Magnetic Suspension Sensor. Adv Mater 2023:e2302815. [PMID: 37272692 DOI: 10.1002/adma.202302815] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Revised: 05/25/2023] [Indexed: 06/06/2023]
Abstract
Tribovoltaic nanogenerator (TVNG), a promising semiconductor energy technology, displays outstanding advantages such as low matching impedance and continuous direct-current output. However, the lack of controllable and stable performance modulation strategies is still a major bottleneck that impedes further practical applications of TVNG. Herein, by leveraging the ferroelectricity-enhanced mechanism and the control of interfacial energy band bending, we construct a lead-free perovskite-based [3,3-difluorocyclobutylammonium]2 CuCl4 ((DF-CBA)2 CuCl4 )/Al Schottky junction TVNG. The multiaxial ferroelectricity of (DF-CBA)2 CuCl4 enables an excellent surface charge modulating capacity, realizing a high work function regulation of ∼ 0.7 eV and over 15-fold current regulation (from 6 μA to 93 μA) via an electrical poling control. The controllable electrical poling leads to elevated work function difference between Al electrode and (DF-CBA)2 CuCl4 compared to traditional semiconductors and halide perovskites, which creates a stronger built-in electric field at the Schottky interface to enhance the electrical output. This TVNG device exhibits outstanding flexibility and long-term stability (> 20000 cycles) that can endure extreme mechanical deformations, and can also be used in a capsule-like magnetic suspension device capable of detecting vibration and weights of different objects as well as harvesting energy from human motions and water waves. This article is protected by copyright. All rights reserved.
Collapse
Affiliation(s)
- Feng Jiang
- Institute of Flexible Electronics Technology of Tsinghua, Jiaxing, Zhejiang, 314000, China
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Xinran Zhou
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gupta Adit
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Hongbo Fu
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Jian Lv
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Liuxiang Zhan
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Yihui Zhang
- Applied Mechanics Laboratory, Department of Engineering Mechanics, Laboratory of Flexible Electronics Technology, Tsinghua University, Beijing, 100084, China
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| |
Collapse
|
4
|
Gao D, Thangavel G, Lee J, Lv J, Li Y, Ciou JH, Xiong J, Park T, Lee PS. A supramolecular gel-elastomer system for soft iontronic adhesives. Nat Commun 2023; 14:1990. [PMID: 37031201 PMCID: PMC10082814 DOI: 10.1038/s41467-023-37535-4] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2022] [Accepted: 03/21/2023] [Indexed: 04/10/2023] Open
Abstract
Electroadhesion provides a promising route to augment robotic functionalities with continuous, astrictive, and reversible adhesion force. However, the lack of suitable conductive/dielectric materials and processing capabilities have impeded the integration of electroadhesive modules into soft robots requiring both mechanical compliance and robustness. We present herein an iontronic adhesive based on a dynamically crosslinked gel-elastomer system, including an ionic organohydrogel as adhesive electrodes and a resilient polyurethane with high electrostatic energy density as dielectric layers. Through supramolecular design and synthesis, the dual-material system exhibits cohesive heterolayer bonding and autonomous self-healing from damages. Iontronic soft grippers that seamlessly integrate actuation, adhesive prehension, and exteroceptive sensation are devised via additive manufacturing. The grippers can capture soft and deformable items, bear high payload under reduced voltage input, and rapidly release foreign objects in contrast to electroadhesives. Our materials and iontronic mechanisms pave the way for future advancement in adhesive-enhanced multifunctional soft devices.
Collapse
Affiliation(s)
- Dace Gao
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
- Advanced Materials Research Center, Technology Innovation Institute (TII), Masdar City, Abu Dhabi, P.O Box 9639, United Arab Emirates
| | - Junwoo Lee
- Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea
- Department of Chemical and Environmental Engineering, Yale University, New Haven, CT, 06511, USA
| | - Jian Lv
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise (CREATE), Singapore, 138602, Singapore
| | - Yi Li
- School of Electrical Engineering and Automation, Wuhan University, Wuhan, 430072, China
| | - Jing-Hao Ciou
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Jiaqing Xiong
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Taiho Park
- Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore.
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise (CREATE), Singapore, 138602, Singapore.
| |
Collapse
|
5
|
Lv J, Thangavel G, Lee PS. Reliability of printed stretchable electronics based on nano/micro materials for practical applications. Nanoscale 2023; 15:434-449. [PMID: 36515001 DOI: 10.1039/d2nr04464a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Recent decades have witnessed the booming development of stretchable electronics based on nano/micro composite inks. Printing is a scalable, low-cost, and high-efficiency fabrication tool to realize stretchable electronics through additive processes. However, compared with conventional flexible electronics, stretchable electronics need to experience more severe mechanical deformation which may cause destructive damage. Most of the reported works in this field mainly focus on how to achieve a high stretchability of nano/micro composite conductors or single working modules/devices, with limited attention given to the reliability for practical applications. In this minireview, we summarized the failure modes when printing stretchable electronics using nano/micro composite ink, including dysfunction of the stretchable interconnects, the stress-concentrated rigid-soft interfaces for hybrid electronics, the vulnerable vias upon stretching, thermal accumulation, and environmental instability of stretchable materials. Strategies for tackling these challenges to realize reliable performances are proposed and discussed. Our review provides an overview on the importance of reliable, printable, and stretchable electronics, which are the key enablers in propelling stretchable electronics from fancy demos to practical applications.
Collapse
Affiliation(s)
- Jian Lv
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore.
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise, Singapore 138602, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore.
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore.
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR), Campus for Research Excellence and Technological Enterprise, Singapore 138602, Singapore
| |
Collapse
|
6
|
Tan MWM, Bark H, Thangavel G, Gong X, Lee PS. Photothermal modulated dielectric elastomer actuator for resilient soft robots. Nat Commun 2022; 13:6769. [DOI: 10.1038/s41467-022-34301-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2022] [Accepted: 10/20/2022] [Indexed: 11/11/2022] Open
Abstract
AbstractSoft robots need to be resilient to extend their operation under unpredictable environments. While utilizing elastomers that are tough and healable is promising to achieve this, mechanical enhancements often lead to higher stiffness that deteriorates actuation strains. This work introduces liquid metal nanoparticles into carboxyl polyurethane elastomer to sensitize a dielectric elastomer actuator (DEA) with responsiveness to electric fields and NIR light. The nanocomposite can be healed under NIR illumination to retain high toughness (55 MJ m−3) and can be recycled at lower temperatures and shorter durations due to nanoparticle-elastomer interactions that minimize energy barriers. During co-stimulation, photothermal effects modulate the elastomer moduli to lower driving electric fields of DEAs. Bilayer configurations display synergistic actuation under co-stimulation to improve energy densities, and enable a DEA crawler to achieve longer strides. This work paves the way for a generation of soft robots that achieves both resilience and high actuation performance.
Collapse
|
7
|
Lv J, Thangavel G, Li Y, Xiong J, Gao D, Ciou J, Tan MWM, Aziz I, Chen S, Chen J, Zhou X, Poh WC, Lee PS. Printable elastomeric electrodes with sweat-enhanced conductivity for wearables. Sci Adv 2021; 7:eabg8433. [PMID: 34261658 PMCID: PMC8279513 DOI: 10.1126/sciadv.abg8433] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2021] [Accepted: 05/28/2021] [Indexed: 05/17/2023]
Abstract
We rationally synthesized the thermoplastic and hydrophilic poly(urethane-acrylate) (HPUA) binder for a type of printable and stretchable Ag flakes-HPUA (Ag-HPUA) electrodes in which the conductivity can be enhanced by human sweat. In the presence of human sweat, the synergistic effect of Cl- and lactic acid enables the partial removal of insulating surfactant on silver flakes and facilitates sintering of the exposed silver flakes, thus the resistance of Ag-HPUA electrodes can be notably reduced in both relaxed and stretched state. The on-body data show that the resistance of one electrode has been decreased from 3.02 to 0.62 ohm during the subject's 27-min sweating activity. A stretchable textile sweat-activated battery using Ag-HPUA electrodes as current collectors and human sweat as the electrolyte was constructed for wearable electronics. The enhanced conductivity of the wearable wiring electrode from the reaction with sweat would provide meritorious insight into the design of wearable devices.
Collapse
Affiliation(s)
- Jian Lv
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Yi Li
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
- School of Electrical Engineering and Automation, Wuhan University, Wuhan, Hubei, 430072, China
| | - Jiaqing Xiong
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Dace Gao
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Jinghao Ciou
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Matthew Wei Ming Tan
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Izzat Aziz
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Shaohua Chen
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Juntong Chen
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Xinran Zhou
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Wei Church Poh
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore.
| |
Collapse
|
8
|
Eh AL, Chen J, Yu SH, Thangavel G, Zhou X, Cai G, Li S, Chua DHC, Lee PS. A Quasi-Solid-State Tristate Reversible Electrochemical Mirror Device with Enhanced Stability. Adv Sci (Weinh) 2020; 7:1903198. [PMID: 32670746 PMCID: PMC7341104 DOI: 10.1002/advs.201903198] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2019] [Revised: 02/10/2020] [Indexed: 05/30/2023]
Abstract
Reversible electrochemical mirror (REM) electrochromic devices with electrochemical tunability in multiple optical states are exciting alternatives to conventional electrochromic smart windows. Electrochromic devices are studied extensively, yet widespread adoptions have not been achieved due to problems associated with durability, switching speed, limited options on optical states, and cost. In this study, a REM electrochromic device based on CuSn alloy is developed, which offers highly reversible switching between transparent, greyish-blue, and mirror states via reversible electrodeposition and dissolution. The alloying element, Sn acts as an electrochemical mediator, which facilitates the electrodeposition and dissolution of Cu. The CuSn-based REM device shows superior cycling stability for 2400 cycles (transmittance mode) and 1000 cycles (reflectance mode). The electrodeposited CuSn alloy film is resistant to surface oxidation in ambient air, with a 2.9% difference in reflectance at 2000 nm after 3 days. In addition, the alloy film exhibits excellent NIR reflectance property with thermal modulation of 18.5 °C at a high temperature of 180 °C. The REM device with zero power consumption maintains its mirror state for at least 100 min, making it a promising candidate for energy-efficient applications.
Collapse
Affiliation(s)
- Alice Lee‐Sie Eh
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
- Singapore‐HUJ Alliance for Research and Enterprise (SHARE)Nanomaterials for Energy and Energy Water Nexus (NEW)Campus for Research Excellence and Technological Enterprise (CREATE)Singapore138602Singapore
| | - Jingwei Chen
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
- Singapore‐HUJ Alliance for Research and Enterprise (SHARE)Nanomaterials for Energy and Energy Water Nexus (NEW)Campus for Research Excellence and Technological Enterprise (CREATE)Singapore138602Singapore
| | - Shu Hearn Yu
- Material Sciences and Engineering DepartmentNational University of SingaporeSingapore117575Singapore
| | - Gurunathan Thangavel
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
| | - Xinran Zhou
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
- Singapore‐HUJ Alliance for Research and Enterprise (SHARE)Nanomaterials for Energy and Energy Water Nexus (NEW)Campus for Research Excellence and Technological Enterprise (CREATE)Singapore138602Singapore
| | - Guofa Cai
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
| | - Shaohui Li
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
| | - Daniel H. C. Chua
- Material Sciences and Engineering DepartmentNational University of SingaporeSingapore117575Singapore
| | - Pooi See Lee
- School of Materials Science and EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
- Singapore‐HUJ Alliance for Research and Enterprise (SHARE)Nanomaterials for Energy and Energy Water Nexus (NEW)Campus for Research Excellence and Technological Enterprise (CREATE)Singapore138602Singapore
| |
Collapse
|
9
|
Xiong J, Thangavel G, Wang J, Zhou X, Lee PS. Self-healable sticky porous elastomer for gas-solid interacted power generation. Sci Adv 2020; 6:eabb4246. [PMID: 32832644 PMCID: PMC7439505 DOI: 10.1126/sciadv.abb4246] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/23/2020] [Accepted: 06/01/2020] [Indexed: 05/25/2023]
Abstract
A previously unknown gas-solid interacted power generation is developed using triboelectric effect. We designed an adhesive, gas-tight, and self-healing supramolecular polysiloxane-dimethylglyoxime-based polyurethane (PDPU) porous elastomer based on segmented oxime-carbamate-urea. It is an intrinsically triboelectric negative material with trapped air within closed voids, exhibiting ultrahigh static surface potential and excellent compressibility. This porous PDPU generates electricity from interactions between the trapped air and the elastomeric matrix under periodical compression. The positively charged trapped air (or other gas) dominates the tribo-electrification with PDPU, inducing electron transfer from gas to the solid polymer for electricity generation. The self-healable elastomer renders gas-solid interacted triboelectric nanogenerator, GS-TENG, with high stretchability (~1200%). The inherently adhesive surface enables adherance to other substrates, allowing mechanical energy harvesting from deformations such as bending, twisting, and stretching. GS-TENG promises a freestanding wearable functional tactile skin for self-powered sensing of touch pressure, human motions, and Parkinsonian gait.
Collapse
Affiliation(s)
| | | | - Jiangxin Wang
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | - Xinran Zhou
- School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore
| | | |
Collapse
|
10
|
Lee J, Tan MWM, Parida K, Thangavel G, Park SA, Park T, Lee PS. Water-Processable, Stretchable, Self-Healable, Thermally Stable, and Transparent Ionic Conductors for Actuators and Sensors. Adv Mater 2020; 32:e1906679. [PMID: 31858638 DOI: 10.1002/adma.201906679] [Citation(s) in RCA: 67] [Impact Index Per Article: 16.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/11/2019] [Revised: 11/30/2019] [Indexed: 05/23/2023]
Abstract
For emerging biocompatible, wearable, and stretchable epidermal electronic devices, it is essential to realize novel stretchable conductors with the attributes of transparency, low-cost and nontoxic components, green-solvent processbility, self-healing, and thermal stabililty. Although conducting materials-rubber composites, ionic hydrogels, organogels have been developed, no stretchable material system that meets all the outlined requirements has been reported. Here, a series of P(SPMA-r-MMA) polymers with different ratios of ionic side chains is designed and synthesized, and it is demonstrated that the resulting stretchable ionic conductors with glycerol are transparent, water processable, self-healable, and thermally stable due to the chemically linked ionic side chain, satisfying all of the aforementioned requirements. Among the series of polymer gels, the P(SPMA0.75 -r-MMA0.25 ) gel shows optimum conductivity (6.7 × 10-4 S cm-1 ), stretchability (2636% of break at elongation), and self-healing (98.3% in 3 h) properties. Accordingly, the transparent and self-healable P(SPMA0.75 -r-MMA0.25 ) gels are used to realize thermally robust actuators up to 100 °C and deformable and self-healable thermal sensors.
Collapse
Affiliation(s)
- Junwoo Lee
- Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Nam-gu, Pohang, Gyeongbuk, 37673, Republic of Korea
| | - Matthew Wei Ming Tan
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Kaushik Parida
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Sang Ah Park
- Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Nam-gu, Pohang, Gyeongbuk, 37673, Republic of Korea
| | - Taiho Park
- Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Nam-gu, Pohang, Gyeongbuk, 37673, Republic of Korea
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| |
Collapse
|
11
|
Halevi O, Chen J, Thangavel G, Morris SA, Ben Uliel T, Tischler YR, Lee PS, Magdassi S. Synthesis through 3D printing: formation of 3D coordination polymers. RSC Adv 2020; 10:14812-14817. [PMID: 35497148 PMCID: PMC9052092 DOI: 10.1039/d0ra01887b] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2020] [Accepted: 04/03/2020] [Indexed: 01/28/2023] Open
Abstract
Coordination polymers (CPs) and coordination network solids such as metal–organic frameworks (MOFs) have gained increasing interest during recent years due to their unique properties and potential applications. Preparing 3D printed structures using CP would provide many advantages towards utilization in fields such as catalysis and sensing. So far, functional 3D structures were printed mostly by dispersing pre-synthesized particles of CPs and MOFs within a polymerizable carrier. This resulted in a CP active material dispersed within a 3D polymeric object, which may obstruct or impede the intrinsic properties of the CP. Here, we present a new concept for obtaining 3D free-standing objects solely composed of CP material, starting from coordination metal complexes as the monomeric building blocks, and utilizing the 3D printer itself as a tool to in situ synthesize a coordination polymer during printing, and to shape it into a 3D object, simultaneously. To demonstrate this, a 3D-shaped nickel tetra-acrylamide monomeric complex composed solely of the CP without a binder was successfully prepared using our direct print-and-form approach. We expect that this work will open new directions and unlimited potential in additive manufacturing and utilization of CPs. DLP is utilized to selectively polymerize nickel acrylamide complexes and form free-standing macro 3D structures, which are composed solely of a coordination polymer.![]()
Collapse
Affiliation(s)
- Oded Halevi
- Casali Center for Applied Chemistry
- Institute of Chemistry
- The Hebrew University of Jerusalem
- Jerusalem
- Israel
| | - Jingwei Chen
- School of Materials Science and Engineering
- Nanyang Technological University
- Singapore
- Singapore-HUJ Alliance for Research and Enterprise (SHARE)
- Nanomaterials for Energy and Energy-Water Nexus (NEW)
| | - Gurunathan Thangavel
- School of Materials Science and Engineering
- Nanyang Technological University
- Singapore
| | | | - Tal Ben Uliel
- Department of Chemistry
- Bar-Ilan University
- Ramat-Gan
- Israel
| | | | - Pooi See Lee
- School of Materials Science and Engineering
- Nanyang Technological University
- Singapore
- Singapore-HUJ Alliance for Research and Enterprise (SHARE)
- Nanomaterials for Energy and Energy-Water Nexus (NEW)
| | - Shlomo Magdassi
- Casali Center for Applied Chemistry
- Institute of Chemistry
- The Hebrew University of Jerusalem
- Jerusalem
- Israel
| |
Collapse
|
12
|
Thangavel G, Tan MWM, Lee PS. Advances in self-healing supramolecular soft materials and nanocomposites. Nano Converg 2019; 6:29. [PMID: 31414249 PMCID: PMC6694335 DOI: 10.1186/s40580-019-0199-9] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/08/2019] [Accepted: 07/22/2019] [Indexed: 05/25/2023]
Abstract
The ability to rationally tune and add new end-groups in polymers can lead to transformative advances in emerging self-healing materials. Self-healing networks manipulated by supramolecular strategies such as hydrogen bonding and metal coordination have received significant attention in recent years because of their ability to extend materials lifetime, improve safety and ensure sustainability. This review describes the recent advancements in supramolecular polymers self-healing networks based on hydrogen bonding, metal-containing polymers and their nanocomposites. Collectively, the aim of this review is to provide a panoramic overview of the conceptual framework for the interesting nexus between hydrogen bonding and metal-ligand interactions for enabling supramolecular self-healing soft materials networks and nanocomposites. In addition, insights on the current challenges and future perspectives of this field to propel the development of self-healing materials will be provided.
Collapse
Affiliation(s)
- Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Matthew Wei Ming Tan
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore.
| |
Collapse
|
13
|
Parida K, Thangavel G, Cai G, Zhou X, Park S, Xiong J, Lee PS. Extremely stretchable and self-healing conductor based on thermoplastic elastomer for all-three-dimensional printed triboelectric nanogenerator. Nat Commun 2019; 10:2158. [PMID: 31089129 PMCID: PMC6517406 DOI: 10.1038/s41467-019-10061-y] [Citation(s) in RCA: 107] [Impact Index Per Article: 21.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/06/2018] [Accepted: 04/12/2019] [Indexed: 11/29/2022] Open
Abstract
Advances in next-generation soft electronic devices rely on the development of highly deformable, healable, and printable energy generators to power these electronics. Development of deformable or wearable energy generators that can simultaneously attain extreme stretchability with superior healability remains a daunting challenge. We address this issue by developing a highly conductive, extremely stretchable, and healable composite based on thermoplastic elastomer with liquid metal and silver flakes as the stretchable conductor for triboelectric nanogenerators. The elastomer is used both as the matrix for the conductor and as the triboelectric layer. The nanogenerator showed a stretchability of 2500% and it recovered its energy-harvesting performance after extreme mechanical damage, due to the supramolecular hydrogen bonding of the thermoplastic elastomer. The composite of the thermoplastic elastomer, liquid metal particles, and silver flakes exhibited an initial conductivity of 6250 S cm−1 and recovered 96.0% of its conductivity after healing. Development of wearable devices relies on advance in power sources with complementary mechanical properties. Here the authors use a conductive, stretchable and healable composite to achieve sustained performance in a triboelectric nanogenerator under extreme deformation and after severe mechanical damage.
Collapse
Affiliation(s)
- Kaushik Parida
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Guofa Cai
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Xinran Zhou
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore.,Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE), 1 Create Way, Singapore, 138602, Singapore
| | - Sangbaek Park
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Jiaqing Xiong
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore. .,Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE), 1 Create Way, Singapore, 138602, Singapore.
| |
Collapse
|
14
|
Parida K, Thangavel G, Cai G, Zhou X, Park S, Xiong J, Lee PS. Extremely stretchable and self-healing conductor based on thermoplastic elastomer for all-three-dimensional printed triboelectric nanogenerator. Nat Commun 2019. [PMID: 31089129 DOI: 10.1038/s-41467-019-10061-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/17/2023] Open
Abstract
Advances in next-generation soft electronic devices rely on the development of highly deformable, healable, and printable energy generators to power these electronics. Development of deformable or wearable energy generators that can simultaneously attain extreme stretchability with superior healability remains a daunting challenge. We address this issue by developing a highly conductive, extremely stretchable, and healable composite based on thermoplastic elastomer with liquid metal and silver flakes as the stretchable conductor for triboelectric nanogenerators. The elastomer is used both as the matrix for the conductor and as the triboelectric layer. The nanogenerator showed a stretchability of 2500% and it recovered its energy-harvesting performance after extreme mechanical damage, due to the supramolecular hydrogen bonding of the thermoplastic elastomer. The composite of the thermoplastic elastomer, liquid metal particles, and silver flakes exhibited an initial conductivity of 6250 S cm-1 and recovered 96.0% of its conductivity after healing.
Collapse
Affiliation(s)
- Kaushik Parida
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Guofa Cai
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Xinran Zhou
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE), 1 Create Way, Singapore, 138602, Singapore
| | - Sangbaek Park
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Jiaqing Xiong
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore.
- Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE), 1 Create Way, Singapore, 138602, Singapore.
| |
Collapse
|
15
|
Park S, Thangavel G, Parida K, Li S, Lee PS. A Stretchable and Self-Healing Energy Storage Device Based on Mechanically and Electrically Restorative Liquid-Metal Particles and Carboxylated Polyurethane Composites. Adv Mater 2019; 31:e1805536. [PMID: 30387213 DOI: 10.1002/adma.201805536] [Citation(s) in RCA: 82] [Impact Index Per Article: 16.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2018] [Revised: 10/03/2018] [Indexed: 06/08/2023]
Abstract
Stretchable and self-healing (SH) energy storage devices are indispensable elements in energy-autonomous electronic skin. However, the current collectors are not self-healable nor intrinsically stretchable, they mostly rely on strain-accommodating structures that require complex processing, are often limited in stretchability, and suffer from low device packing density and fragility. Here, an SH conductor comprising nickel flakes, eutectic gallium indium particles (EGaInPs), and carboxylated polyurethane (CPU) is presented. An energy storage device is constructed by the two SH electrodes assembled with graphene nanoplatelets sandwiching an ionic-liquid electrolyte. An excellent electrochemical healability (94% capacity retention upon restretching at 100% after healing from bifurcation) is unveiled, stemming from the complexation modulated redox behavior of EGaIn in the presence of the ligand bis(trifluoromethanesulfonyl)imide, which enhances the reversible Faradaic reaction of Ga. Self-healing can be achieved where the damaged regions are electrically restored by the flow of liquid metal and mechanically healing activated by the interfacial hydrogen bonding of CPU with an efficiency of 97.5% can be achieved. The SH conductor has an initial conductivity of 2479 S cm-1 that attains a high stretchability with 700% strain, it restores 100% stretchability even after breaking/healing with the electrical healing efficiency of 75%.
Collapse
Affiliation(s)
- Sangbaek Park
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Kaushik Parida
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Shaohui Li
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| |
Collapse
|
16
|
Cai G, Wang J, Eh ALS, Chen J, Qian K, Xiong J, Thangavel G, Lee PS. Diphylleia grayi-Inspired Stretchable Hydrochromics with Large Optical Modulation in the Visible-Near-Infrared Region. ACS Appl Mater Interfaces 2018; 10:37685-37693. [PMID: 30272945 DOI: 10.1021/acsami.8b12490] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Some animals and plants in nature are endowed with elegant color-changing ability, which inspired the development of biomimetic systems with multifunctionality, such as controllable colors, transmittance, and mechanical pliability that are significant for the development of energy-efficient and deformable chromic devices, such as wearable displays, smart windows, decorative architectures, camouflage devices, etc. Inspired by the color-changing ability of Diphylleia grayi (commonly known as the skeleton flower), we developed a porous poly(dimethylsiloxane) (PDMS) film that dynamically and dramatically changes its color by the adsorption/desorption of a minute amount of water (5 g m-2) or other solvents. This hydrochromic phenomenon was analyzed in detail, and it matched well with the Mie scattering theory. The porous PDMS film of about 0.4 mm thickness exhibits a large optical modulation (about 75-80%) in the broad visible and near-infrared region and a coloration speed of less than 9 min. Additionally, the PDMS film can sustain uniaxial strain up to 100% in both transparent and colored states. We believe this new strategy to develop highly scalable porous PDMS films offers a practical route to realize bionic and botanic inspired deformable energy-efficient façades, chromogenic wearables, smart windows, smart displays, camouflage devices, etc.
Collapse
Affiliation(s)
- Guofa Cai
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Jiangxin Wang
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Alice Lee-Sie Eh
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Jingwei Chen
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Kai Qian
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Jiaqing Xiong
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Gurunathan Thangavel
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering , Nanyang Technological University , 639798 Singapore
| |
Collapse
|
17
|
Singh VK, Yu C, Badgujar S, Kim Y, Kwon Y, Kim D, Lee J, Akhter T, Thangavel G, Park LS, Lee J, Nandajan PC, Wannemacher R, Milián-Medina B, Lüer L, Kim KS, Gierschner J, Kwon MS. Highly efficient organic photocatalysts discovered via a computer-aided-design strategy for visible-light-driven atom transfer radical polymerization. Nat Catal 2018. [DOI: 10.1038/s41929-018-0156-8] [Citation(s) in RCA: 84] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
18
|
Affiliation(s)
| | - G Thangavel
- Department of Environmental Health Engineering; Sri Ramachandra University; Chennai India
| |
Collapse
|
19
|
Sudharsanam S, Swaminathan S, Ramalingam A, Thangavel G, Annamalai R, Steinberg R, Balakrishnan K, Srikanth P. Characterization of indoor bioaerosols from a hospital ward in a tropical setting. Afr Health Sci 2012; 12:217-25. [PMID: 23056031 DOI: 10.4314/ahs.v12i2.22] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
OBJECTIVES Study was conducted to assess whether temporal variation exists in airborne microbial concentrations of a hospital ward (west-Chennai, India) using active and passive methods, and characterise the microorganisms. METHODS Air samples (duplicates) were collected simultaneously using exposed-plate, impingement (BioSampler) and filtration (personal sampling filter cassette loaded with gelatin filter) methods over different periods of the year. Bacterial plates were incubated at 37°C and observed for growth after 48h; fungal plates were incubated at 25°C and 37°C and observed upto 7 days. Microorganisms were identified using standard microbiological procedures. RESULTS Microbial loads were found to vary with the sampling method. Concentrations of bacteria were higher (exposed-plate: 45-150 CFU/plate; impingement: 1.12E+03-1.6856E+05 CFU/m(3); filtration: 3.788E+03-1.91111E+05 CFU/m(3)) than fungi (exposed-plate: 0-13 CFU/plate; impingement: 0-3.547E+03 CFU/m(3); filtration: 0-1.515E+04 CFU/ m(3)). Coagulase-negative Staphylococci and Micrococci were the predominant Gram-positive cocci in active and passive samples. Enterobacter and Pseudomonas were the predominant Gram-negative bacilli. Among fungi, Aspergillus niger was isolated throughout the year. There was no significant temporal variation in airborne microbial loads irrespective of methods. CONCLUSIONS Exposed-plate method was found to capture microorganisms efficiently with little variation in duplicate samples, suggesting its use in hospitals for preliminary assessment of indoor air quality and determine pathogenic microorganisms due to particle fall-out.
Collapse
Affiliation(s)
- S Sudharsanam
- Sri Ramachandra Medical College and Research Institute, Sri Ramachandra University, Porur, Chennai, Tamil Nadu, India.
| | | | | | | | | | | | | | | |
Collapse
|
20
|
Ashok M, Thangavel G, Indrani S, Suresh S. Atrioventricular septal defect--associated anomalies and aneuploidy in prenatal life. Indian Pediatr 2003; 40:659-64. [PMID: 12881623] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/03/2023]
Abstract
The present study was conducted to estimate the frequency of other-cardiac, extracardiac and chromosomal anomalies in fetuses with A VSD diagnosed in a prenatal diagnosis center, analysed from the database during the 54-month period extending from November 1997 to May 2002. One hundred and three fetuses were diagnosed with A VSD. Among them other-cardiac and extra cardiac anomalies were present in 56 and 75 cases respectively. Of the 22 fetuses that had undergone karyotyping, no metaphase was seen in one case. In the remaining 21, 15 (71.4%) turned out to be normal, three (14.2%) had trisomy 18, two (9.5%) had trisomy 13 and one had trisomy 21 (4.8%). We found that AVSD almost always occurs with other-cardiac or extracardiac anomalies, though the pattern may differ between populations. It seems to be less frequently associated with chromosomal anomalies (especially trisomy 21) in South India. The genetics of AVSD underscores the importance of a thorough understanding of the target population in prenatal decision-making.
Collapse
Affiliation(s)
- M Ashok
- Mediscan Prenatal Diagnosis and Fetal Therapy Center, Chennai 600 014, India
| | | | | | | |
Collapse
|