The distal hinge of the reactive site loop and its proximity: a target to modulate plasminogen activator inhibitor-1 activity

The serpin plasminogen activator inhibitor type 1 (PAI-1) plays a regulatory role in various physiological processes (e.g. fibrinolysis and pericellular proteolysis) and forms a potential target for therapeutic interventions. In this study we identified the epitopes of three PAI-1 inhibitory monoclonal antibodies (MA-44E4, MA-42A2F6, and MA-56A7C10). Differential cross-reactivities of these monoclonals with PAI-1 from different species and sequence alignments between these PAI-1s, combined with the three-dimensional structure, revealed several charged residues as possible candidates to contribute to the respective epitopes. The production, characterization, and subsequent evaluation of a variety of alanine mutants using surface plasmon resonance revealed that the residues His(185), Arg(186), and Arg(187) formed the major sites of interaction for MA-44E4. In contrast, the epitopes of MA-42A2F6 and MA-56A7C10 were found to be conformational. The epitope of MA-42A2F6 comprises residues Lys(243) and Glu(350), whereas the epitope of MA-56A7C10 comprises residues Glu(242), Lys(243), Glu(244), Glu(350), Asp(355), and Arg(356). The participation of Glu(350), Asp(355), and Arg(356) provides a molecular explanation for the differential exposure of this epitope in the different conformations of PAI-1 and for the effect of these antibodies on the kinetics of the formation of the initial PAI-1-proteinase complexes. The localization of the epitopes of MA-44E4, MA42A2F6, and MA-56A7C10 elucidates two previously unidentified molecular mechanisms to modulate PAI-1 activity and opens new perspectives for the rational development of PAI-1 neutralizing compounds.

Resolution of Michaelis complex, acylation, and conformational change steps in the reactions of the serpin, plasminogen activator inhibitor-1, with tissue plasminogen activator and trypsin

Michaelis complex, acylation, and conformational change steps were resolved in the reactions of the serpin, plasminogen activator inhibitor-1 (PAI-1), with tissue plasminogen activator (tPA) and trypsin by comparing the reactions of active and Ser 195-inactivated enzymes with site-specific fluorescent-labeled PAI-1 derivatives that report these events. Anhydrotrypsin or S195A tPA-induced fluorescence changes in P1'-Cys and P9-Cys PAI-1 variants labeled with the fluorophore, NBD, indicative of a substrate-like interaction of the serpin reactive loop with the proteinase active-site, with the P1' label but not the P9 label perturbing the interactions by 10-60-fold. Rapid kinetic analyses of the labeled PAI-1-inactive enzyme interactions were consistent with a single-step reversible binding process involving no conformational change. Blocking of PAI-1 reactive loop-beta-sheet A interactions through mutation of the P14 Thr --> Arg or annealing a reactive center loop peptide into sheet A did not weaken the binding of the inactive enzymes, suggesting that loop-sheet interactions were unlikely to be induced by the binding. Only active trypsin and tPA induced the characteristic fluorescence changes in the labeled PAI-1 variants previously shown to report acylation and reactive loop-sheet A interactions during the PAI-1-proteinase reaction. Rapid kinetic analyses showed saturation of the reaction rate constant and, in the case of the P1'-labeled PAI-1 reaction, biphasic changes in fluorescence indicative of an intermediate resembling the noncovalent complex on the path to the covalent complex. Indistinguishable K(M) and k(lim) values of approximately 20 microM and 80-90 s(-1) for reaction of the two labeled PAI-1s with trypsin suggested that a diffusion-limited association of PAI-1 and trypsin and rate-limiting acylation step, insensitive to the effects of labeling, controlled covalent complex formation. By contrast, differing values of K(M) of 1.7 and 0.1 microM and of k(lim) of 17 and 2.6 s(-1) for tPA reactions with P1' and P9-labeled PAI-1s, respectively, suggested that tPA-PAI-1 exosite interactions, sensitive to the effects of labeling, promoted a rapid association of PAI-1 and tPA and reversible formation of an acyl-enzyme complex but impeded a rate-limiting burial of the reactive loop leading to trapping of the acyl-enzyme complex. Together, the results suggest a kinetic pathway for formation of the covalent complex between PAI-1 and proteinases involving the initial formation of a Michaelis-type noncovalent complex without significant conformational change, followed by reversible acylation and irreversible reactive loop conformational change steps that trap the proteinase in a covalent complex.

Partitioning of serpin-proteinase reactions between stable inhibition and substrate cleavage is regulated by the rate of serpin reactive center loop insertion into beta-sheet A

The serpin family of serine proteinase inhibitors is a mechanistically unique class of naturally occurring proteinase inhibitors that trap target enzymes as stable covalent acyl-enzyme complexes. This mechanism appears to require both cleavage of the serpin reactive center loop (RCL) by the proteinase and a significant conformational change in the serpin structure involving rapid insertion of the RCL into the center of an existing beta-sheet, serpin beta-sheet A. The present study demonstrates that partitioning between inhibitor and substrate modes of reaction can be altered by varying either the rates of RCL insertion or deacylation using a library of serpin RCL mutants substituted in the critical P(14) hinge residue and three different proteinases. We further correlate the changes in partitioning with the actual rates of RCL insertion for several of the variants upon reaction with the different proteinases as determined by fluorescence spectroscopy of specific RCL-labeled inhibitor mutants. These data demonstrate that the serpin mechanism follows a branched pathway, and that the formation of a stable inhibited complex is dependent upon both the rate of the RCL conformational change and the rate of enzyme deacylation.

Accelerated conversion of human plasminogen activator inhibitor-1 to its latent form by antibody binding

The serpin plasminogen activator inhibitor-1 (PAI-1) slowly converts to an inactive latent form by inserting a major part of its reactive center loop (RCL) into its beta-sheet A. A murine monoclonal antibody (MA-33B8), raised against the human plasminogen activator (tPA).PAI-1 complex, rapidly inactivates PAI-1. Results presented here indicate that MA-33B8 induces acceleration of the active-to-latent conversion. The antibody-induced inactivation of PAI-1 labeled with the fluorescent probe N, N'-dimethyl-N-(acetyl)-N'-(7-nitrobenz-2-oxa-1,3-diazol-4-yl) ethylene diamine (NBD) at P9 in the RCL caused a fluorescence enhancement and shift identical to those accompanying the spontaneous conversion of the P9.NBD PAI-1 to the latent form. Like latent PAI-1, antibody-inactivated PAI-1 was protected from cleavage by elastase. The rate constants for MA-33B8 binding, measured by NBD fluorescence or inactivation, were similar (1.3-1.8 x 10(4) M-1 s-1), resulting in a 4000-fold faster inactivation at 4.2 microM antibody binding sites. The apparent antibody binding rate constant, at least 1000 times slower than one limited by diffusion, indicates that exposure of its epitope depends on an unfavorable equilibrium of PAI-1. Our observations are consistent with this idea and suggest that the equilibrium involves partial insertion of the RCL into sheet A: latent, RCL-cleaved, and tPA-complexed PAI-1, which are inactive loop-inserted forms, bound much faster than active PAI-1 to MA-33B8, whereas two loop-extracted forms of PAI-1, modified to prevent loop insertion, did not bind or bound much more weakly to the antibody.

Inhibitory mechanism of serpins: loop insertion forces acylation of plasminogen activator by plasminogen activator inhibitor-1

Serpin inhibitors are believed to form an acyl enzyme intermediate with their target proteinases which is stabilized through insertion of the enzyme-linked part of the reactive center loop (RCL) as strand 4 in beta-sheet A of the inhibitor. To test critically the role and timing of these steps in the reaction of the plasminogen activator inhibitor PAI-1, we blocked the vacant position 4 in beta-sheet A of this serpin with an octapeptide. The peptide-blocked PAI-1 was a substrate for both tissue-type plasminogen activator (tPA) and trypsin and was hydrolyzed at the scissile bond. The reactivity of the peptide-blocked substrate PAI-1 was compared to that of the unmodified inhibitor by rapid acid quenching as well as photometric techniques. With trypsin as target, the limiting rate constants for enzyme acylation were essentially the same with inhibitor and substrate PAI-1 (21-23 s-1), as were also the associated apparent second-order rate constants (2.8-2.9 microM-1 s-1). With tPA, inhibitor and substrate PAI-1 reacted identically to form a tightly bound Michaelis complex (Kd approximately Km approximately 20 nM). The limiting rate constant for acylation of tPA, however, was 57 times faster with inhibitor PAI-1 (3.3 s-1) than with the substrate form (0.059 s-1), resulting in a 5-fold difference in the corresponding second-order rate constants (13 vs 2.5 microM-1 s-1). We attribute the ability of tPA to discriminate between the two PAI-1 forms to exosite bonds that cannot occur with trypsin. The exosite bonds retain specifically the distal part of the PAI-1 RCL in the substrate pocket, which favors a reversal of the acylation step. Acylation of tPA becomes effective only by separating the products of the acylation step. With substrate PAI-1, this depends on passive displacement of bonds, whereas with inhibitor PAI-1, separation is accomplished by loop insertion that pulls tPA from its docking site on PAI-1, resulting in faster acylation than with substrate PAI-1.

Characterization of the binding of different conformational forms of plasminogen activator inhibitor-1 to vitronectin. Implications for the regulation of pericellular proteolysis

Plasminogen activator inhibitor type 1 (PAI-1), the primary physiologic inhibitor of plasminogen activation, is associated with the adhesive glycoprotein vitronectin (Vn) in plasma and the extracellular matrix. In this study we examined the binding of different conformational forms of PAI-1 to both native and urea-purified vitronectin using a solid-phase binding assay. These results demonstrate that active PAI-1 binds to urea-purified Vn with approximately 6-fold higher affinity than to native Vn. In contrast, inactive forms of PAI-1 (latent, elastase-cleaved, synthetic reactive center loop peptide-annealed, or complexed to plasminogen activators) display greatly reduced affinities for both forms of adsorbed Vn, with relative affinities reduced by more than 2 orders of magnitude. Structurally, these inactive conformations all differ from active PAI-1 by insertion of an additional strand into beta-sheet A, suggesting that it is the rearrangement of sheet A that results in reduced Vn affinity. This is supported by the observation that PAI-1 associated with beta-anhydrotrypsin, which does not undergo rearrangement of beta-sheet A, shows no such decrease in affinity, whereas PAI-1 complexed to beta-trypsin, which does undergo sheet A rearrangement, displays reduced affinity for Vn similar to PAI-1.plasminogen activator complexes. Together these data demonstrate that the interaction between PAI-1 and Vn depends on the conformational state of both proteins and suggest that the Vn binding site on PAI-1 is sensitive to structural changes associated with loss of inhibitory activity.

The use of fluorescent probes to characterize conformational changes in the interaction between vitronectin and plasminogen activator inhibitor-1

Plasminogen activator inhibitor-1 (PAI-1), the primary inhibitor of tissue-type plasminogen activator and urokinase, is known to convert readily to a latent form by insertion of the reactive center loop into a central beta-sheet. Interaction with vitronectin stabilizes PAI-1 and decreases the rate of conversion to the latent form, but conformational effects of vitronectin on the reactive center loop of PAI-1 have not been documented. Mutant forms of PAI-1 were designed with a cysteine substitution at either position P1' or P9 of the reactive center loop. Labeling of the unique cysteine with a sulfhydryl-reactive fluorophore provides a probe that is sensitive to vitronectin binding. Results indicate that the scissile P1-P1' bond of PAI-1 is more solvent exposed upon interaction with vitronectin, whereas the N-terminal portion of the reactive loop does not experience a significant change in its environment. These results were complemented by labeling vitronectin with an arginine-specific coumarin probe which compromises heparin binding but does not interfere with PAI-1 binding to the protein. Dissociation constants of approximately 100 nM are calculated for the vitronectin/PAI-1 interaction from titrations using both fluorescent probes. Furthermore, experiments in which PAI-1 failed to compete with heparin for binding to vitronectin argue for separate binding sites for the two ligands on vitronectin.

Analogs of human plasminogen that are labeled with fluorescence probes at the catalytic site of the zymogen. Preparation, characterization, and interaction with streptokinase

Fluorescent analogs of the proteinase zymogen, plasminogen (Pg), which are specifically inactivated and labeled at the catalytic site have been prepared and characterized as probes of the mechanisms of Pg activation. The active site induced non-proteolytically in Pg by streptokinase (SK) was inactivated stoichiometrically with the thioester peptide chloromethyl ketone. N alpha-[(acetylthio)acetyl]-(D-Phe)-Phe-Arg-CH2Cl; the thiol group generated subsequently on the incorporated inhibitor with NH2OH was quantitatively labeled with the fluorescence probe, 2-((4'-iodoacetamido)anilino)naphthalene-6-sulfonic acid; and the labeled Pg was separated from SK. Cleavage of labeled [Glu]Pg1 by urokinase-type plasminogen activator (uPA) was accompanied by a fluorescence enhancement (delta Fmax/Fo) of 2.0, and formation of 1% plasmin (Pm) activity. Comparison of labeled and native [Glu]Pg1 as uPA substrates showed that activation of labeled [Glu]Pg1 generated [Glu]Pm1 as the major product, while native [Glu]Pg1 was activated at a faster rate and produced [Lys]Pm1 because of concurrent proteolysis by plasmin. When a mixture of labeled and native Pg was activated, to include plasmin-feedback reactions, the zymogens were activated at equivalent rates. The lack of potential proteolytic activity of the Pg derivatives allowed their interactions with SK to be studied under equilibrium binding conditions. SK bound to labeled [Glu]Pg1, and [Lys]Pg1 with dissociation constants of 590 +/- 110 and 110 and 11 +/- 7 nM, and fluorescence enhancements of 3.1 +/- 0.1 and 1.6 +/- 0.1, respectively. Characterization of the interaction of SK with native [Glu]Pg1 by the use of labeled [Glu]Pg1 as a probe indicated a approximately 6-fold higher affinity of SK for the native Pg zymogen compared to the labeled Pg analog. Saturating levels of epsilon-aminocaproic acid reduced the affinity of SK for labeled [Glu]Pg1 by approximately 2-fold and lowered the fluorescence enhancement to 1.8 +/- 0.1, whereas the affinity of SK for labeled [Lys]Pg1 was reduced by approximately 98-fold with little effect on the enhancement. These results demonstrate that occupation of lysine binding sites modulates the affinity of SK for Pg and the changes in the environment of the catalytic site associated with SK-induced conformational activation. Together, these studies show that the labeled Pg derivatives behave as analogs of native Pg which report functionally significant changes in the environment of the catalytic site of the zymogen.

Role of the catalytic serine in the interactions of serine proteinases with protein inhibitors of the serpin family. Contribution of a covalent interaction to the binding energy of serpin-proteinase complexes

The contribution of a covalent bond to the stability of complexes of serine proteinases with inhibitors of the serpin family was evaluated by comparing the affinities of beta-trypsin and the catalytic serine-modified derivative, beta-anhydrotrypsin, for several serpin and non-serpin (Kunitz) inhibitors. Kinetic analyses showed that anhydrotrypsin had little or no ability to compete with trypsin for binding to alpha 1-proteinase inhibitor (alpha 1PI), plasminogen activator inhibitor 1 (PAI-1), antithrombin (AT), or AT-heparin complex when present at up to a 100-fold molar excess over trypsin. By contrast, equimolar levels of anhydrotrypsin blocked trypsin binding to non-serpin inhibitors. Equilibrium binding studies of inhibitor-enzyme interactions monitored by inhibitor displacement of the fluorescence probe, p-aminobenzamidine, from the enzyme active site, confirmed that the binding of serpins to anhydrotrypsin was undetectable in the case of alpha 1PI or AT (KI > 10(-5) M), of low affinity in the case of AT-heparin complex (KI 7-9 x 10(-6) M), and of moderate affinity in the case of PAI-1 (KI 2 x 10(-7) M). This contrasted with the stoichiometric high affinity binding of the serpins to trypsin as well as of the non-serpin inhibitors to both trypsin and anhydrotrypsin. Maximal KI values for serpin-trypsin interactions of 1 to 8 x 10(-11) M, obtained from kinetic analyses of association and dissociation rate constants, indicated that the affinity of serpins for trypsin was minimally 4 to 6 orders of magnitude greater than that of anhydrotrypsin. Anhydrotrypsin, unlike trypsin, failed to induce the characteristic fluorescence changes in a P9 Ser-->Cys PAI-1 variant labeled with a nitrobenzofuran fluorescent probe (NBD) which were shown previously to report the serpin conformational change associated with active enzyme binding. These results demonstrate that a covalent interaction involving the proteinase catalytic serine contributes a major fraction of the binding energy to serpin-trypsin interactions and is essential for inducing the serpin conformational change involved in the trapping of enzyme in stable complexes.

The acid stabilization of plasminogen activator inhibitor-1 depends on protonation of a single group that affects loop insertion into beta-sheet A

The serpin plasminogen activator inhibitor-1 (PAI-1) spontaneously adopts an inactive or latent conformation by inserting the N-terminal part of the reactive center loop as strand 4 into the major beta-sheet (sheet A). To examine factors that may regulate reactive loop insertion in PAI-1, we determined the inactivation rate of the inhibitor in the pH range 4.5-13. Below pH 9, inactivation led primarily to latent PAI-1, and one predominant effect of pH on the corresponding rate constant could be observed. Protonation of a group exhibiting a pKa of 7.6 (25 degrees C, ionic strength = 0.15 M) reduced the rate of formation of latent PAI-1 by a factor of 35, from 0.17 h-1 at pH 9 to about 0.005 h-1 below pH 6. The ionization with a pKa 7.6 was found to have no effect on the rate by which PAI-1 inhibits trypsin and is therefore unlikely to change the flexibility of the loop or the orientation of the reactive center. The peptides Ac-TEASSSTA and Ac-TVASSSTA (cf. P14-P7 in the reactive loop of PAI-1) formed stable complexes with PAI-1 and converted the inhibitor to a substrate for tissue type plasminogen activator. We found that peptide binding and formation of latent PAI-1 are mutually exclusive events, similarly affected by the pKa 7.6 ionization. This is direct evidence that external peptides can substitute for strand 4 in beta-sheet A of PAI-1 and that the pKa 7.6 ionization regulates insertion of complementary, internal or external, strands into this position. A model that accounts for the observed pH effects is presented, and the identity of the ionizing group is discussed based on the structure of latent PAI-1. The group is tentatively identified as His-143 in helix F, located on top of sheet A.

Serpin-protease complexes are trapped as stable acyl-enzyme intermediates

The serine protease inhibitors of the serpin family are an unusual group of proteins thought to have metastable native structures. Functionally, they are unique among polypeptide protease inhibitors, although their precise mechanism of action remains controversial. Conflicting results from previous studies have suggested that the stable serpin-protease complex is trapped in either a tight Michaelis-like structure, a tetrahedral intermediate, or an acyl-enzyme. In this report we show that, upon association with a target protease, the serpin reactive-center loop (RCL) is cleaved resulting in formation of an acyl-enzyme intermediate. This cleavage is coupled to rapid movement of the RCL into the body of the protein bringing the inhibitor closer to its lowest free energy state. From these data we suggest a model for serpin action in which the drive toward the lowest free energy state results in trapping of the protease-inhibitor complex as an acyl-enzyme intermediate.

Peptide-mediated inactivation of recombinant and platelet plasminogen activator inhibitor-1 in vitro

Plasminogen activator inhibitor-1 (PAI-1), the primary inhibitor of tissue-type plasminogen activator (t-PA) and urokinase plasminogen activator, is an important regulator of the blood fibrinolytic system. Elevated plasma levels of PAI-1 are associated with thrombosis, and high levels of PAI-1 within platelet-rich clots contribute to their resistance to lysis by t-PA. Consequently, strategies aimed at inhibition of PAI-1 may prove clinically useful. This study was designed to test the hypothesis that a 14-amino acid peptide, corresponding to the PAI-1 reactive center loop (residues 333-346), can rapidly inhibit PAI-1 function. PAI-1 (0.7 microM) was incubated with peptide (55 microM) at 37 degrees C. At timed intervals, residual PAI-1 activity was determined by addition of reaction mixture samples to t-PA and chromogenic substrate. The T1/2 of PAI-1 activity in the presence of peptide was 4 +/- 3 min compared to a control T1/2 of 98 +/- 18 min. The peptide also inhibited complex formation between PAI-1 and t-PA as demonstrated by SDS-PAGE analysis. However, the capacity of the peptide to inhibit PAI-1 bound to vitronectin, a plasma protein that stabilizes PAI-1 activity, was markedly attenuated. Finally, the peptide significantly enhanced in vitro lysis of platelet-rich clots and platelet-poor clots containing recombinant PAI-1. These results indicate that a 14-amino acid peptide can rapidly inactivate PAI-1 and accelerate fibrinolysis in vitro. These studies also demonstrate that PAI-1 function can be directly attenuated in a physiologic setting and suggest a novel approach for augmenting fibrinolysis in vivo.

Identification of tissue-type plasminogen activator-specific plasminogen activator inhibitor-1 mutants. Evidence that second sites of interaction contribute to target specificity

Plasminogen activator inhibitor-1 (PAI-1) is the primary inhibitor of the plasminogen activators (PAs), tissue-type plasminogen activator (tPA), and urokinase-type plasminogen activator (uPA). A library of PAI-1 mutants containing substitutions at the P1 and P1' positions was screened for functional activity against tPA and thrombin. Several PAI-1 variants that were inactive against uPA in a previous study (Sherman, P. M., Lawrence, D. A., Yang, A. Y., Vandenberg, E. T., Paielli, D., Olson, S. T., Shore, J. D., and Ginsburg, D. (1992) J. Biol. Chem. 267, 7588-7595) had significant inhibitory activity toward tPA. This set of tPA-specific PAI-1 mutants contained a wide range of amino acid substitutions at P1 including Asn, Gln, His, Ser, Thr, Leu, Met, and all the aromatic amino acids. This group of mutants also demonstrated a spectrum of substitutions at P1'. Kinetic analyses of selected variants identified P1Tyr and P1His as the most efficient tPA-specific inhibitors, with second-order rate constants (ki) of 4.0 x 10(5) M-1s-1 and 3.6 x 10(5) M-1s-1, respectively. Additional PA-specific PAI-1 variants containing substitutions at P3 through P1' were constructed. P3Tyr-P2Ser-P1Lys-P1'Trp and P3Tyr-P2Ser-P1Tyr-P1'Met had ki values of 1.7 x 10(6) M-1s-1 and 2.5 x 10(6) M-1s-1 against tPA, respectively, but both were inactive against uPA. In contrast, P2Arg-P1Lys-P1'Ala inhibited uPA 74-fold more rapidly than tPA. The mutant PAI-1 library was also screened for inhibitory activity toward thrombin in the presence and absence of the cofactor heparin. While wild-type PAI-1 and several P1Arg variants inhibited thrombin in the absence of heparin, a number of variants were thrombin inhibitors only in the presence of heparin. These results demonstrate the importance of the reactive center residues in determining PAI-1 target specificity and suggest that second sites of interaction between inhibitors and proteases can also contribute to target specificity. Finally, the PA-specific mutants described here should provide novel reagents for dissecting the physiological role of PAI-1 both in vitro and in vivo.

A fluorescent probe study of plasminogen activator inhibitor-1. Evidence for reactive center loop insertion and its role in the inhibitory mechanism

A mutant recombinant plasminogen activator inhibitor 1 (PAI-1) was created (Ser-338-->Cys) in which cysteine was placed at the P9 position of the reactive center loop. Labeling this mutant with N,N'-dimethyl-N-(acetyl)-N'-(7-nitrobenz-2-oxa-1,3-diazol-4-yl) ethylene diamine (NBD) provided a molecule with a fluorescent probe at that position. The NBD-labeled mutant was almost as reactive as wild type but was considerably more stable. Complex formation with tissue or urokinase type plasminogen activator (tPA or uPA), and cleavage between P3 and P4 with a catalytic concentration of elastase, all resulted in identical 13-nm blue shifts of the peak fluorescence emission wavelength and 6.2-fold fluorescence enhancements. Formation of latent PAI showed the same 13-nm spectral shift with a 6.7-fold fluorescence emission increase, indicating that the NBD probe is in a slightly more hydrophobic milieu. These changes can be attributed to insertion of the reactive center loop into the beta sheet A of the inhibitor in a manner that exposes the NBD probe to a more hydrophobic milieu. The rate of loop insertion due to tPA complexation was followed using stopped flow fluorimetry. This rate showed a hyperbolic dependence on tPA concentration, with a half-saturation concentration of 0.96 microM and a maximum rate constant of 3.4 s-1. These results demonstrate experimentally that complexation with proteases is presumably associated with loop insertion. The identical fluorescence changes obtained with tPa.PAI-1 and uPA.PAI-1 complexes and elastase-cleaved PAI-1 strongly suggest that in the stable protease-PAI-1 complex the reactive center loop is cleaved and inserted into beta sheet A and that this process is central to the inhibition mechanism.

Surface-induced alterations in the kinetic pathway for cleavage of human high molecular weight kininogen by plasma kallikrein

We have studied the cleavage of human high molecular weight kininogen (HK) by plasma kallikrein in the absence and presence of the surfaces, dextran sulfate (DxSO4) and sulfatides. Using a combination of SDS-polyacrylamide gel electrophoresis, Western blotting with polyclonal antibodies that specifically recognize the COOH terminus of the bradykinin moiety, and high pressure liquid chromatography analyses of the cleavage reaction, we have identified two intermediates in the formation of bradykinin from intact kininogen and demonstrated that alternative cleavage pathways are followed in the absence and presence of surfaces. The COOH-terminal bradykinin cleavage occurred first both in the absence and presence of DxSO4, producing a 103-kDa HK intermediate consisting of disulfide-linked heavy and light chains that retained the kinin moiety. In the presence of DxSO4, this was followed exclusively by the NH2-terminal bradykinin cleavage and release of kinin with no apparent change in molecular mass. Subsequently, a slower cleavage of an 8-kDa peptide from the amino terminus of the HK light chain occurred to form a 95-kDa end product. In contrast to this sequential cleavage pattern, NH2-terminal bradykinin and light chain cleavages occurred randomly in the absence of DxSO4, resulting in the production of an additional 95-kDa intermediate that retained bradykinin but had lost the 8-kDa peptide from the HK light chain. Comparison of the relative rates of the three kallikrein cleavages in the absence and presence of DxSO4 indicated that the surface enhanced the rates of both bradykinin cleavages 2-4-fold, but inhibited the light chain cleavage rate approximately 10-fold, thereby accounting for the change from a partially random to a sequential cleavage pattern in the presence of the surface. Steady-state kinetic analysis revealed that DxSO4 enhanced the kcat/KM for bradykinin release by the rate-limiting NH2-terminal bradykinin cleavage by approximately 2-fold due exclusively to an increase in kcat. Sulfatides appeared to produce the same effects on the pattern of HK cleavages as DxSO4. Blocking of the nonactive site, i.e. exosite, interaction between kallikrein and HK with excess prekallikrein or a synthetic peptide containing the region of HK that interacts with the kallikrein exosite significantly reduced the rate of bradykinin release as well as HK cleavages detected by SDS-polyacrylamide gel electrophoresis either in the absence or presence of DxSO4, indicating that the exosite interaction facilitates bradykinin cleavage.

Surface-independent acceleration of factor XII activation by zinc ions. II. Direct binding and fluorescence studies

To determine the role of Zn(II)-factor XII interactions in the rate-enhancing effect of Zn(II) on factor XII activation demonstrated in the preceding paper, equilibrium binding of zinc ions to factor XII, and the spectroscopic changes accompanying this binding were investigated. Equilibrium dialysis provided direct evidence for the binding of Zn(II) to factor XII. The binding data were consistent with 7.8 +/- 0.3 zinc ions binding with an indistinguishable Kd of 91 +/- 6 microM. Binding of Zn(II) was accompanied by a 10% quenching of the intrinsic protein fluorescence and a 2-nm red shift of the wavelength of maximum emission. These spectroscopic changes were specific for factor XII and were not observed with factor XIIa. The Zn(II) concentration dependence of factor XII fluorescence quenching was sigmoid and paralleled the Zn(II)-accelerating effect of factor XII activation by kallikrein and factor XIIa, indicating that the spectral change was reporting Zn(II)-factor XII interactions responsible for the enhanced activation rate. The apparent cooperativity of Zn(II) effects on factor XII fluorescence quenching and activation kinetics, and the apparent noncooperativity in Zn(II) binding to factor XII measured by equilibrium dialysis could be explained by a two-state model in which Zn(II) binding is linked to a conformational change in the protein. The Zn(II)-induced quenching of factor XII fluorescence exhibited a pH dependence consistent with the involvement of histidine residues in the binding of Zn(II). Dynamic quenching of factor XII protein fluorescence by iodide or acrylamide, in the absence and presence of Zn(II), revealed heterogeneity in the environment of the 13 tryptophan residues of factor XII that was markedly reduced by metal ion binding. Together, these results indicate that cooperative interactions of Zn(II) with factor XII induce structural changes in the zymogen that facilitate its proteolytic cleavage and activation.

Surface-independent acceleration of factor XII activation by zinc ions. I. Kinetic characterization of the metal ion rate enhancement

The effect of zinc ions (Zn(II)) on the activation of factor XII in the absence of a procoagulant surface was investigated by initial velocity kinetic studies at I = 0.15, pH 7.4, and 25 degrees C. Zinc ions at concentrations greater than 160 microM potentiated 99-fold the kcat/KM for the activation of factor XII by kallikrein and, at an optimum concentration of 110 microM, accelerated 140-fold the apparent kcat/KM for factor XII autoactivation. High molecular weight kininogen had no effect on either metal-potentiated reaction. Analysis of the factor XII concentration dependence of initial activation rates revealed that Zn(II), at levels that saturate the effect, accelerates kallikrein activation of factor XII by lowering KM (from 52 to 7.3 microM) and raising kcat (from 2.6 to 31 min-1). For the autocatalytic activation reaction of factor XII in the presence of optimal Zn(II), apparent KM and kcat values of 2.4 microM and 0.041 min-1, respectively, were determined, but these parameters were not resolvable in the absence of the metal ion. Zinc ions minimally affected kallikrein enzymatic activity and inhibited factor XIIa enzymatic activity with KI values of 20-40 microM, suggesting that the rate-enhancing effects of the metal ion are due to interactions with the substrate (factor XII) rather than with the enzyme. The Zn(II) inhibition of factor XIIa enzymatic activity accounted for a decreased Zn(II) enhancement of factor XII autoactivation at high metal ion concentrations (> 110 microM). The Zn(II) concentration dependence of the acceleration of factor XII activation reactions were sigmoid and characterized by Hill coefficients of 3.3-4.3, suggesting that cooperative binding of at least four zinc ions to factor XII was responsible for the Zn(II) potentiating effect. The Zn(II) enhancement of the rates of factor XII activation decreased both above and below pH 7.4 with midpoint pH values of 6.5-7.0 and 8.0, consistent with histidine and possibly water ligands mediating Zn(II) binding to the protein. Despite an apparent weaker binding of Zn(II) to factor XII at pH 6.5, indistinguishable maximum accelerating effects of the metal ion were observed at saturation at this pH, indicating that the increased positive charge of factor XII resulting from protonation at the lower pH did not mimic the effect of Zn(II) binding. These results imply that zinc ions induce a conformational change in factor XII that makes it a better substrate for its enzyme activators.

Role of the antithrombin-binding pentasaccharide in heparin acceleration of antithrombin-proteinase reactions. Resolution of the antithrombin conformational change contribution to heparin rate enhancement

The synthetic antithrombin-binding heparin pentasaccharide and a full-length heparin of approximately 26 saccharides containing this specific sequence have been compared with respect to their interactions with antithrombin and their ability to promote inhibition and substrate reactions of antithrombin with thrombin and factor Xa. The aim of these studies was to elucidate the pentasaccharide contribution to heparin's accelerating effect on antithrombin-proteinase reactions. Pentasaccharide and full-length heparins bound antithrombin with comparable high affinities (KD values of 36 +/- 11 and 10 +/- 3 nM, respectively, at I 0.15) and induced highly similar protein fluorescence, ultraviolet and circular dichroism changes in the inhibitor. Stopped-flow fluorescence kinetic studies of the heparin binding interactions at I 0.15 were consistent with a two-step binding process for both heparins, involving an initial weak encounter complex interaction formed with similar affinities (KD 20-30 microM), followed by an inhibitor conformational change with indistinguishable forward rate constants of 520-700 s-1 but dissimilar reverse rate constants of approximately 1 s-1 for the pentasaccharide and approximately 0.2 s-1 for the full-length heparin. Second order rate constants for antithrombin reactions with thrombin and factor Xa were maximally enhanced by the pentasaccharide only 1.7-fold for thrombin, but a substantial 270-fold for factor Xa, in an ionic strength-independent manner at saturating oligosaccharide. In contrast, the full-length heparin produced large ionic strength-dependent enhancements in second order rate constants for both antithrombin reactions of 4,300-fold for thrombin and 580-fold for factor Xa at I 0.15. These enhancements were resolvable into a nonionic component ascribable to the pentasaccharide and an ionic component responsible for the additional rate increase of the larger heparin. Stoichiometric titrations of thrombin and factor Xa inactivation by antithrombin, as well as sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the products of these reactions, indicated that pentasaccharide and full-length heparins similarly promoted the formation of proteolytically modified inhibitor during the inactivation of factor Xa by antithrombin, whereas only the full-length heparin was effective in promoting this substrate reaction of antithrombin during the reaction with thrombin.(ABSTRACT TRUNCATED AT 400 WORDS)

Saturation mutagenesis of the plasminogen activator inhibitor-1 reactive center

Plasminogen activator inhibitor-1 (PAI-1) is a specific inhibitor of the serine proteases tissue-type plasminogen activator (tPA) and urokinase-type plasminogen activator (uPA). To systematically investigate the roles of the reactive center P1 and P1' residues in PAI-1 function, saturation mutagenesis was utilized to construct a library of PAI-1 variants. Examination of 177 unique recombinant proteins indicated that a basic residue was required at P1 for significant inhibitory activity toward uPA, whereas all substitutions except proline were tolerated at P1'. P1Lys variants exhibited lower inhibition rate constants and greater sensitivity to P1' substitutions than P1Arg variants. Alterations at either P1 or P1' generally had a larger effect on the inhibition of tPA. A number of variants that were relatively specific for either uPA or tPA were identified. P1Lys-P1'Ala reacted 40-fold more rapidly with uPA than tPA, whereas P1Lys-P1'Trp showed a 6.5-fold preference for tPA. P1-P1' variants containing additional mutations near the reactive center demonstrated only minor changes in activity, suggesting that specific amino acids in this region do not contribute significantly to PAI-1 function. These findings have important implications for the role of reactive center residues in determining serine protease inhibitor (serpin) function and target specificity.

Parallel procoagulant and anticoagulant pathways for high molecular weight kininogen coagulant function

High molecular weight kininogen (HK) or its procoagulant light-chain but not the heavy chain potentiated the heparin enhancement of antithrombin III inactivation of plasma kallikrein and factor XIa from 10-50-fold to approximately 1000-fold at I 0.15, pH 7.4, 25 degrees C. This potentiation resulted in antithrombin becoming a predominant inhibitor of kallikrein and factor XIa in heparinized normal but not HK-deficient plasmas. The heparin chain-length and salt dependence of this potentiation suggested an anticoagulant action of HK analogous to its procoagulant action.

Transient kinetics of heparin-catalyzed protease inactivation by antithrombin III. Characterization of assembly, product formation, and heparin dissociation steps in the factor Xa reaction

The kinetics of alpha-factor Xa inhibition by antithrombin III (AT) were studied in the absence and presence of heparin (H) with high affinity for antithrombin by stopped-flow fluorometry at I 0.3, pH 7.4 and 25 degrees C, using the fluorescence probe p-aminobenzamidine (P) and intrinsic protein fluorescence to monitor the reactions. Active site binding of p-aminobenzamidine to factor Xa was characterized by a 200-fold enhancement and 4-nm blue shift of the probe fluorescence emission spectrum (lambda max 372 nm), 29-nm red shift of the excitation spectrum (lambda max 322 nm), and dissociation constant (KD) of about 80 microM. Under pseudo-first order conditions [( AT]0, [H]0, [P]0 much greater than [Xa]0), the observed factor Xa inactivation rate constant (kobs) measured by p-aminobenzamidine displacement or residual enzymatic activity increased linearly with the "effective" antithrombin concentration (i.e. corrected for probe competition) up to 300 microM in the absence of heparin, indicating a simple bimolecular process with a rate constant of 2.1 x 10(3) M-1 s-1. In the presence of heparin, a similar linear dependence of kobs on effective AT.H complex concentration was found up to 25 microM whether the reaction was followed by probe displacement or the quenching of AT.H complex protein fluorescence due to heparin dissociation, consistent with a bimolecular reaction between AT.H complex and free factor Xa with a 300-fold enhanced rate constant of 7 x 10(5) M-1 s-1. Above 25 microM AT.H complex, an increasing dead time displacement of p-aminobenzamidine and a downward deviation of kobs from the initial linear dependence on AT.H complex concentration were found, reflecting the saturation of an intermediate Xa.AT.H complex with a KD of 200 microM and a limiting rate of Xa-AT product complex formation of 140 s-1. Kinetic studies at catalytic heparin concentrations yielded a kcat/Km for factor Xa at saturating antithrombin of 7 x 10(5) M-1 s-1 in agreement with the bimolecular rate constant obtained in single heparin turnover experiments. These results demonstrate that 1) the accelerating effect of heparin on the AT/Xa reaction is at least partly due to heparin promoting the ordered assembly of antithrombin and factor Xa in an intermediate ternary complex and that 2) heparin catalytic turnover is limited by the rate of conversion of the ternary complex intermediate to the product Xa-AT complex with heparin dissociation occurring either concomitant with this step or in a subsequent faster step.

Binding of heparin to human high molecular weight kininogen

The binding of heparin to high molecular weight kininogen (H-kininogen) was analyzed by the effect of kininogen in decreasing the heparin-induced enhancement of the rate of inactivation of thrombin by antithrombin. The conditions were arranged so that the heparin-catalyzed antithrombin-thrombin reaction, monitored in the presence of the reversible thrombin inhibitor p-aminobenzamidine, followed pseudo-first-order kinetics and the observed rate constant (kappa obsd) varied linearly with the heparin concentration. In the absence of metal ions, H-kininogen minimally affected kappa obsd, measured at a constant concentration of heparin with high affinity for antithrombin (30 nM), at I = 0.15, pH 7.4 and 25 degrees C. However, at a saturating concentration of Zn2+ (10 microM), kappa obsd was reduced to 50% at approximately 20 nM H-kininogen and to that of the uncatalyzed reaction at greater than or equal to approximately 0.2 microM H-kininogen. Conversely, at a saturating concentration of H-kininogen (0.5 microM), kappa obsd was decreased to 50% at approximately 0.6 microM Zn2+ and to the kappa obsd of the uncatalyzed reaction at greater than or equal to 10 microM Zn2+. Other metal ions were effective in the order Zn2+ approximately Ni2+ greater than Cu2+ approximately Co2+ approximately Cd2+. The single-chain and two-chain forms of H-kininogen and the H-kininogen light chain reduced the heparin enhancement in the presence of Zn2+ to the same extent, whereas low molecular weight kininogen had no influence.(ABSTRACT TRUNCATED AT 250 WORDS)

Acceleration of surface-dependent autocatalytic activation of blood coagulation factor XII by divalent metal ions

The effect of divalent metal ions on the rate of dextran sulfate dependent autocatalytic activation of human blood coagulation factor XII was studied at pH 7.4 and 25 degrees C. Zn2+ and Cu2+, but not Co2+, increased the rate of factor XII activation induced by dextran sulfate with optimum effects at approximately 5 and 1 microM, respectively, while Ca2+ acceleration required much higher concentrations (millimolar). Further investigation of the effect of Zn2+ on factor XII activation demonstrated a complete dependence on the presence of dextran sulfate, lack of inhibition by soybean trypsin inhibitor, the appearance of alpha-XIIa as the primary reaction product, and reaction kinetics characteristic of an autocatalytic process. These results were consistent with Zn2+ affecting only the rate of surface-mediated factor XII autoactivation. The initial turnover velocity of dextran sulfate induced factor XII autoactivation increased linearly with factor XII concentration in the absence of Zn2+ up to 0.9 microM factor XII but showed saturation behavior over this same concentration range in the presence of 5 microM Zn2+, indicating that Zn2+ increased the reaction rate primarily by lowering the apparent Km. Comparison of the kinetics of autoactivation at mu = 0.15 and 0.24 revealed that the enhancement in the apparent kcat/Km brought about by Zn2+ increased from 19-fold to 520-fold, respectively, due to a differential dependence of the Zn2+-stimulated and unstimulated reactions on ionic strength.(ABSTRACT TRUNCATED AT 250 WORDS)

Transient kinetics of heparin-catalyzed protease inactivation by antithrombin III. The reaction step limiting heparin turnover in thrombin neutralization

The intrinsic protein fluorescence quenching which accompanies the heparin-accelerated inhibition of thrombin (T) by antithrombin III (AT) was resolved into a heparin-independent component associated with formation of the product T-AT complex and a component associated with an AT conformational change linked to heparin dissociation. To determine whether dissociation of heparin from the product T-AT complex limits the rate at which heparin can turn over catalytically, the kinetics of protein fluorescence quenching during the reaction of thrombin with AT X heparin complex (AT X H) were investigated by stopped-flow fluorimetry under pseudo-first order conditions ([AT X H]o much greater than [T]o). Both fluorescence components were quenched in a single exponential reaction with a hyperbolic dependence of the first order rate constant (kobs) on [AT X H]o. An indistinguishable hyperbolic dependence of kobs on [AT X H]o was measured by displacement of p-aminobenzamidine from the T active site, with both signals extrapolating to a limiting rate constant of 5 s-1. These results indicate that heparin dissociation occurs concomitant with T-AT complex formation at the limiting 5 s-1 rate constant. In reasonable agreement with this value, a kcat of 2.3 s-1 was determined for heparin turnover at catalytic concentrations. We conclude that formation of the T-AT complex is the primary rate-limiting step in heparin catalytic turnover and that this reaction is accompanied by a change in conformation of the AT component resulting in facile heparin dissociation.

Protein-protein interactions in contact activation of blood coagulation. Binding of high molecular weight kininogen and the 5-(iodoacetamido) fluorescein-labeled kininogen light chain to prekallikrein, kallikrein, and the separated kallikrein heavy and light chains

Binding of the 5-(iodoacetamido)fluorescein (IAF)-labeled high molecular weight (HMW) kininogen light chain to prekallikrein and D-Phe-Phe-Arg-CH2Cl-inactivated kallikrein was monitored by a 0.040 +/- 0.002 increase in fluorescence anisotropy. Indistinguishable average dissociation constants and stoichiometries of 14 +/- 3 nM and 1.1 +/- 0.1 mol of prekallikrein/mol of IAF-light chain and 17 +/- 3 nM and 0.9 +/- 0.1 mol of kallikrein/mol of IAF-light chain were determined for these interactions at pH 7.4, mu 0.14 and 22 degrees C. Prekallikrein which had been reduced and alkylated in 6 M guanidine HCl lost the ability to increase the fluorescence anisotropy of the IAF-kininogen light chain, suggesting that the native tertiary structure was required for tight binding. The kallikrein heavy and light chains were separated on the basis of the affinity of the heavy chain for HMW-kininogen-Sepharose, after mild reduction and alkylation of kallikrein under nondenaturing conditions. Under these conditions, alkylation with iodo [14C]acetamide demonstrated that only limited chemical modification had occurred. Binding of the IAF-kininogen light chain to the isolated alkylated kallikrein heavy chain, when compared to prekallikrein and kallikrein, was characterized by an indistinguishable increase in fluorescence anisotropy, average dissociation constant of 14 +/- 3 nM, and stoichiometry of 1.2 +/- 0.1 mol of kallikrein heavy chain/mol of IAF-light chain. In contrast, no binding of the D-Phe-Phe-Arg-CH2Cl-inactivated kallikrein light chain was detected at concentrations up to 500 nM. Furthermore, 300 nM kallikrein light chain did not affect IAF-kininogen light chain binding to prekallikrein, kallikrein, or the kallikrein heavy chain. The binding of monomeric single chain HMW-kininogen to prekallikrein, kallikrein, and the kallikrein heavy and light chains was studied using the IAF-kininogen light chain as a probe. Analysis of the competitive binding of HMW-kininogen gave average dissociation constants and stoichiometries of 12 +/- 2 nM and 1.2 +/- 0.1 mol of prekallikrein/mol of HMW-kininogen, 15 +/- 2 nM and 1.3 +/- 0.1 mol of kallikrein/mol of HMW-kininogen, 14 +/- 3 nM and 1.4 +/- 0.2 mol of kallikrein heavy chain/mol of HMW-kininogen, and no detectable effect of 300 nM kallikrein light chain on these interactions. We conclude that a specific, nonenzymatic interaction between sites located exclusively on the light chain of HMW-kininogen and the heavy chain of kallikrein or prekallikrein is responsible for the formation of 1:1 noncovalent complexes between these proteins.

Anion effects on the liver alcohol dehydrogenase reaction

The effects of various anions on the rate constant for dissociation of NADH from a binary complex with horse liver alcohol dehydrogenase were evaluated. Phosphate, sulfate, and fluoride had no effect, while nitrate and the other halide ions caused a three- to fourfold increase in the rate constant for NADH dissociation. These results indicate that a ternary enzyme-NADH-anion complex is formed, and from the anion concentration dependence the relative affinities are iodide greater than nitrate and bromide greater than chloride. At high salt concentrations, above 0.2 M, the rate constants for NADH dissociation decreased, which was attributed to a decrease in the activity coefficient of the reactants or "salting in." The rate constant for NADH dissociation from ternary complex with imidazole, which crystallizes in an orthorhombic form rather than triclinic, was also substantially enhanced by anions. This provides an indication that the enhancement is independent of the conformational state of the enzyme complex. Thus, the most likely explanation for the observed enhancement of NADH dissociation is anion interference with binding of the coenzyme pyrophosphate group, which does not occur with larger anions such as phosphate or sulfate. Since NADH dissociation partially limits the turnover of the enzyme, the effect of nitrate on steady-state turnover was determined. A twofold increase was observed at optimal levels of nitrate, at both substrate inhibitory and noninhibitory concentrations of ethanol.

Protein-protein interactions in contact activation of blood coagulation. Characterization of fluorescein-labeled human high molecular weight kininogen-light chain as a probe

Limited proteolysis of high molecular weight kininogen by kallikrein resulted in the generation of an inactive heavy chain of Mr = 64,000 and active light chains of Mr = 64,000 and 51,000 when analyzed by sodium dodecyl sulfate (SDS)-gel electrophoresis under reducing conditions. Starting with kininogen from outdated plasma, a light chain with an apparent molecular weight of 51,000 on 7.5% SDS gels was purified and characterized. Molecular weights of 28,900 +/- 1,100 and 30,500 +/- 1,600 were obtained by gel filtration of the reduced and alkylated protein in 6 M guanidine HCl and equilibrium sedimentation under nondenaturing conditions in the air-driven ultracentrifuge, respectively. The light chain stained positively with periodic acid-Schiff reagent on SDS gels indicating that covalently attached carbohydrate may be responsible for the anomalously high molecular weight estimated by SDS-gel electrophoresis. A single light chain thiol group reacted with 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) in the presence and absence of 6 M guanidine HCl. Specific fluorescent labeling of the thiol group with 5-(iodoacetamido)fluorescein (IAF) occurred without loss of clotting activity. Addition of purified human plasma prekallikrein to the IAF-light chain resulted in a maximum increase in fluorescence anisotropy of 0.041 +/- 0.001 and no change in the fluorescence intensity. Fluorescence anisotropy measurements of the equilibrium binding of prekallikrein to the IAF-light chain yielded an average Kd of 17.3 +/- 2.5 nM and stoichiometry of 1.07 +/- 0.07 mol of prekallikrein/mol of IAF-light chain. Measurements of the interaction of prekallikrein with iodoacetamide-alkylated light chain using the IAF-light chain as a probe gave an average Kd of 16 +/- 4 nM and stoichiometry of 1.0 +/- 0.2 indicating indistinguishable affinities for prekallikrein.

Transient kinetic studies of substrate inhibition in the horse liver alcohol dehydrogenase reaction

The rate-limiting step of ethanol oxidation by alcohol dehydrogenase (E) at substrate inhibitory conditions (greater than 500 mM ethanol) is shown to be the dissociation rate of NADH from the abortive E-ethanol-NADH complex. The dissociation rate constant of NADH decreased hyperbolically from 5.2 to 1.4 s-1 in the presence of ethanol causing a decrease in the Kd of NADH binding from 0.3 microM for the binary complex to 0.1 microM for the abortive complex. Correspondingly, ethanol binding to E-NADH (Kd = 37 mM) was tighter than to enzyme (Kd = 109 mM). The binding rate of NAD+ (7 X 10(5) M-1s-1) to enzyme was not affected by the presence of ethanol, further substantiating that substrate inhibition is totally due to a decrease in the dissociation rate constant of NADH from the abortive complex. Substrate inhibition was also observed with the coenzyme analog, APAD+, but a single transient was not found to be rate limiting. Nevertheless, the presence of substrate inhibition with APAD+ is ascribed to a decrease in the dissociation rate of APADH from 120 to 22 s-1 for the abortive complex. Studies to discern the additional limiting transient(s) in turnover with APAD+ and NAD+ were unsuccessful but showed that any isomerization of the enzyme-reduced coenzyme-aldehyde complex is not rate limiting. Chloride increases the rate of ethanol oxidation by hyperbolically increasing the dissociation rate constant of NADH from enzyme and the abortive complex to 12 and 2.8 s-1, respectively. The chloride effect is attributed to the binding of chloride to these complexes, destabilizing the binding of NADH while not affecting the binding of ethanol.

p-Aminobenzamidine as a fluorescent probe for the active site of serine proteases

p-Aminobenzamidine is weakly fluorescent in neutral aqueous buffer, with excitation and emission maxima at 293 and 376 nm, respectively. Binding to trypsin results in a blue shift of the emission peak to 362 nm, and 50-fold fluorescence enhancement, while binding to thrombin causes a shift to 368 nm and a 230-fold fluorescence enhancement. This phenomenon is due to hydrophobic interactions, as evidenced by the similar properties observed when p-aminobenzamidine is dissolved in solvents of decreasing polarity. The absorbance spectrum of p-aminobenzamidine is red-shifted by formation of a complex with proteases, with the major difference peak appearing at 317 nm and 323 nm for trypsin and thrombin, respectively. The difference extinction coefficients were 6000 M-1 cm-1 for trypsin complex and 13,300 M-1 cm-1 for thrombin complex at the peak wavelengths. Titration of trypsin and thrombin with the probe indicated one binding site per molecule, with dissociation constants equal to the kinetically determined inhibition constants. The KD values for trypsin and thrombin were 6.1 and 65 microM, respectively. An important potential use of this probe is in studies of inhibitor and substrate binding by rapid reaction kinetic techniques. Using this probe to study the interaction of thrombin with antithrombin III yielded a bimolecular rate constant of 8.0 x 10(3) M-1 s-1, which compares favorably with the value of 8.7 x 10(3) M-1 s-1 obtained from discontinuous assays of the rate of thrombin neutralization.