Extraction and Determination of Phenolic Derivatives in Water Samples by Using Polyoxyethylene Surfactants and Liquid Chromatography with Photodiode Array Detection

Methodology based on the cloud-point phenomenon was applied to the comparative study of 3 different polyoxyethylene nonionic surfactants in order to extract and preconcentrate a group of phenolic derivatives in water samples; these phenolic compounds, which were determined by liquid chromatography with UV detection, included 11 pollutants given priority by the U.S. Environmental Protection Agency. The optimum conditions for the extraction and preconcentration of phenolic compounds were established for each surfactant. The surfactant that gave the best extraction and preconcentration of the analytes under study was polyoxyethylene 6 lauryl ether (C12E6) with detection limits of <3.5 μg/L for all the phenolic compounds tested. The method was applied to seawater and depurated wastewater samples.

Coupling of solid-phase microextraction with micellar desorption and high performance liquid chromatography for the determination of pharmaceutical residues in environmental liquid samples

A residue analytical method combining solid-phase microextraction (SPME) with external micellar desorption (MD) and high-performance liquid chromatography with diode array detector (HPLC-DAD) has been developed and validated for the simultaneous determination of six pharmaceutical compounds, belonging to various therapeutic categories in water samples. Target compounds include antiinflamatory drugs (ibuprofen, ketoprofen and naproxen), an analgesic (phenazone), a lipid regulator (bezafibrate) and an antiepileptic (carbamazepine). A detailed study of the experimental conditions of extraction and desorption with different surfactants was performed in order to obtain the best results during instrumental analysis. Of the different fibers and surfactants investigated, 65 microm polydimethysiloxane-divinilbenzene (PDMS-DVB) fiber and polyoxyethylene 10 lauryl ether (POLE) and polyoxyethylene 6 lauryl ether (C(12)E(6)) as desorbing agents produced the optimal response to pharmaceutical residues. Recoveries obtained were generally higher than 80% and the variability of the method was below 16% for all compounds in both surfactants. Method detection limits were 0.05-12 ng mL(-1) for POLE and 0.1-5 ng mL(-1) for C(12)E(6). The developed method was compared using external desorption with organic solvent and it was successfully applied to the determination of these pharmaceutical compounds in water samples from different origin. Solid-phase microextraction with micellar desorption (SPME-MD) represents a new approach for the extraction of different pharmaceutical compounds in natural waters because it combines shorter handling time, better efficiency, safety and more environmentally friendly process than the traditional methods.

Implementation of solid-phase microextraction with micellar desorption method for priority phenolic compound determination in natural waters

Eleven phenolic compounds considered by the Environmental Protection Agency to be priority pollutants are extracted and determined in different water samples. The method involves the extraction and clean-up step of target compounds by solid-phase microextraction and micellar desorption (SPME-MD) and a second step of determination by liquid chromatography with diode array detection. Different fibers and surfactants are evaluated for the analysis of these target analytes in water samples. In the optimum conditions for the SPME process, recoveries for the target compounds are between 80% and 109%; relative standard deviations are lower than 10%, and detection limits are in the range 0.3-3.5 ng/mL. The main advantages of this method are the combination of time and efficiency, safety, and an environmentally friendly process for sample extraction prior to instrumental determination. This demonstrates that SPME-MD can be used as an alternative to traditional methods for the extraction and determination of priority phenolic compounds in natural waters from different origins.

Solid-phase microextraction of benzimidazole fungicides in environmental liquid samples and HPLC–fluorescence determination

Solid-phase microextraction (SPME) coupled with high-performance liquid chromatography (HPLC) with fluorescence detection was optimized for extraction and determination of four benzimidazole fungicides (benomyl, carbendazim, thiabendazole, and fuberidazole) in water. We studied extraction and desorption conditions, for example fiber type, extraction time, ionic strength, extraction temperature, and desorption time to achieve the maximum efficiency in the extraction. Results indicate that SPME using a Carboxen-polydimethylsiloxane 75 microm (CAR-PDMS) fiber is suitable for extraction of these types of compound. Final analysis of benzimidazole fungicides was performed by HPLC with fluorescence detection. Recoveries ranged from 80.6 to 119.6 with RSDs below 9% and limits of detection between 0.03 and 1.30 ng mL-1 for the different analytes. The optimized procedure was applied successfully to the determination of benzimidazole fungicides mixtures in environmental water samples (sea, sewage, and ground water).

Development of a solid-phase microextraction method with micellar desorption for the determination of chlorophenols in water samples

A novel analytical method is presented for the determination of chlorophenols in water. This method involves pre-concentration by solid-phase microextraction (SPME) and an external desorption using a micellar medium as desorbing agent. Final analysis of the selected chlorophenols compounds was carried out by high-performance liquid chromatography (HPLC) with diode array detection (DAD). Optimum conditions for desorption, using the non-ionic surfactant polyoxyethylene 10 lauryl ether (POLE), such as surfactant concentration and time were studied. A satisfactory reproducibility for the extraction of target compounds, between 6 and 15%, was obtained, and detection limits were in the range of 1.1-5.9ngmL(-1). The developed method is evaluated and compared with the conventional one using organic solvent as a desorbing agent. The method was successfully applied to the determination of chlorophenols in water samples from different origin. This study has demonstrated that solid-phase microextraction with micellar desorption (SPME-MD) can be used as an alternative to conventional SPME method for the extraction of chlorophenols in water samples.

Sample extraction method combining micellar extraction-SPME and HPLC for the determination of organochlorine pesticides in agricultural soils

A method for the determination of organochlorine pesticides in soil samples combining microwave assisted micellar extraction (MAME) with solid-phase microextraction (SPME) and high-performance liquid chromatography-UV has been developed. A mixture of two nonionic surfactants (polyoxyethylene 10 lauryl ether and polyoxyethylene 10 stearyl ether) was used for the extraction of pesticides from agricultural soils, and different types of SPME fibers were compared. The different parameters which affect extraction efficiency in the SPME procedure were optimized such as extraction time and temperature. The method developed involves extraction and preconcentration for the target analytes in soil samples. The analytical parameters were also studied and good recoveries obtained, RSD being lower than 10% and detection limits ranging between 36 and 164 ng g(-1) for the pesticides studied. The proposed method was successfully applied to the determination of some organochlorine pesticides in several kinds of agricultural soil samples with different characteristics.

Optimisation of solid-phase microextraction coupled to HPLC-UV for the determination of organochlorine pesticides and their metabolites in environmental liquid samples

A solid-phase microextraction (SPME) procedure using two commercial fibers coupled with high-performance liquid chromatography (HPLC) is presented for the extraction and determination of organochlorine pesticides in water samples. We have evaluated the extraction efficiency of this kind of compound using two different fibers: 60-mum polydimethylsiloxane-divinylbenzene (PDMS-DVB) and Carbowax/TPR-100 (CW/TPR). Parameters involved in the extraction and desorption procedures (e.g. extraction time, ionic strength, extraction temperature, desorption and soaking time) were studied and optimized to achieve the maximum efficiency. Results indicate that both PDMS-DVB and CW/TPR fibers are suitable for the extraction of this type of compound, and a simple calibration curve method based on simple aqueous standards can be used. All the correlation coefficients were better than 0.9950, and the RSDs ranged from 7% to 13% for 60-mum PDMS-DVB fiber and from 3% to 10% for CW/TPR fiber. Optimized procedures were applied to the determination of a mixture of six organochlorine pesticides in environmental liquid samples (sea, sewage and ground waters), employing HPLC with UV-diode array detector.

Environmental analysis based on luminescence in organized supramolecular systems

The use of organized supramolecular systems-including micellar media and cyclodextrin inclusion complexes-combined with luminescence techniques in the study and determination of compounds and elements of environmental interest from 1990 to 2005 is reviewed. Analyses of environmental samples performed using fluorescence, photochemically induced fluorescence and phosphorescence spectroscopy as well as liquid chromatography, capillary electrophoresis and flow injection with luminescence detection in the presence of these organized media are described in detail.

Extraction and determination of phenolic derivatives in water samples by using polyoxyethylene surfactants and liquid chromatography with photodiode array detection

Methodology based on the cloud-point phenomenon was applied to the comparative study of 3 different polyoxyethylene nonionic surfactants in order to extract and preconcentrate a group of phenolic derivatives in water samples; these phenolic compounds, which were determined by liquid chromatography with UV detection, included 11 pollutants given priority by the U.S. Environmental Protection Agency. The optimum conditions for the extraction and preconcentration of phenolic compounds were established for each surfactant. The surfactant that gave the best extraction and preconcentration of the analytes under study was polyoxyethylene 6 lauryl ether (C12E6) with detection limits of <3.5 microg/L for all the phenolic compounds tested. The method was applied to seawater and depurated wastewater samples.

Determination of free amino acids in microalgae by high-performance liquid chromatography using pre-column fluorescence derivatization

An analytical method for a rapid reverse-phase liquid chromatography of amino acids is presented. The total analysis time was 19 min. The average relative deviation over the measured peak area was lower than 10% and the fluorescent response was linear with concentration for OPA derivatives (r > 0.99) in the range 100-1000 nM. The proposed method was applied to the determination of free amino acids in two microalgae species (Chlorella pyrenoidosa and Chlamydomonas rinhardtii). The principal aminoacids found were alanine, arginine leucine, serine and glutamic acid.

Optimization of the separation selectivity of PCBs in a hydroorganic reverse-phase liquid chromatography in the presence of cetyltrimethylammonium bromide with fluorescence detection

The retention of different PCBs of toxicological and environmental interest was studied in a hydro-alcoholic reverse-phase liquid chromatography in the presence of cetyltrimethylammonium bromide (CTAB). The influence of variables like type and percentage of alcohol, concentration of CTAB, temperature and mobile phase flow was determined. According to the aforementioned studies, the appropriate conditions for separation of PCBs in presence of CTAB in a hydro-alcoholic medium are: percentage of 1-Propanol 55% (v/v), concentration of CTAB 5.0 x 10(-3) M, temperature 50 +/- 1 degrees C and mobile phase flow 1 ml min-1.