Development of Novel Focal Irradiation Tool for High-Precision Irradiation Using Clinical Brachytherapy System

PURPOSE/OBJECTIVE(S)

Several small animals, including mice, are used to conduct research on state-of-the-art radiation therapy techniques or treatment-related toxicity. However, it is difficult to conduct the focal irradiation to a shallow depth on small animals, because irradiation using LINAC has limitations in energy and field size. The purpose of this paper was to develop a focal irradiation tool for high-precision irradiation and to evaluate beam characteristics.

MATERIALS/METHODS

We designed the collimator of 1 mm diameter consisting of tungsten material for high-precision irradiation applied to the clinical brachytherapy system and the percent depth dose and horizontal profile were measured. We compared the depth dose and horizontal profile with 4 mm diameter SRS cone for 6 MV in LINAC. We measured the PDD and horizontal profile using EBT3 film for high-precision irradiation of 1 mm diameter using Ir-192 source. In case of 4 mm diameter, the beam was measured using edge detector. In addition, all measurements were compared with the results of planning tool simulation.

RESULTS

In case of focal irradiation tool, the maximum dose showed at the surface for both measurement and simulation, and 26% and 32% doses at 1 mm depth, respectively. In addition, FWHM at a 1 mm depth showed that high-precision irradiation was possible with measurement and simulation results of 1.86 and 1.28 mm. In case of LINAC, the maximum dose was showed at a depth of 1 cm and 0.8 cm in the measurement and simulation, respectively. Even if the smallest cone is used, the FWHM at a dmax depth was 4.0 mm in both simulation and measurement.

CONCLUSION

We overcame the limitation for energy and field size through the focal irradiation tool for high-precision irradiation. The focal irradiation tool enables high dose delivery to the shallow depth. In addition, small FWHM reduced dose delivery to the periphery at a specific depth and enabled accurate dose delivery. These results mean that the focal irradiation tool can be useful in small animal experiments that require accurate doses near the shallow depth.

A Photograph-Based Visualization and Prediction Framework for Radiation-Induced Dermatitis

PURPOSE/OBJECTIVE(S)

This study aimed to suggest a photograph-based prediction system for acute radiation-induced dermatitis (RID), which can be applied to notify patients about the risk of the development of skin discomfort during radiotherapy.

MATERIALS/METHODS

The proposed system compared the spatial dose distribution with the RID region using the following methods. Skin photographs of patients were taken using an RGB-depth camera to acquire the shape information of RID. The skin surface data measured from the camera was registered with the shape of the external body contour using an iterative closest point algorithm. Spatial dose distribution of skin was extracted from the external body contour to a depth of 2 mm and projected onto the plane of the skin photograph using a transformation matrix for skin depth data. To compare the spatial distribution of skin dose with the shape of RID, the region of RID in patients' skin was delineated on photographs into three toxicity symptoms referring to the CTCAE criteria grade 1 (skin redness), grade 2 (dry desquamation), and grade 3 (moist desquamation). The degree of overlap between the shape of each RID and skin dose distribution was evaluated using the dice similarity coefficient (DSC). Threshold doses for predicting RID occurrence were estimated by skin isodose lines with the highest DSC. The developed system was validated using data from 19 patients who received volumetric modulated arc therapy for head-neck cancer at a single institution.

RESULTS

Threshold doses for RID grades 1, 2, and 3 were estimated using 18, 18, and 2 individual RID labels delineated on skin photographs, respectively. Isodose lines with the highest DSC for RID grades 1, 2, and 3 were calculated as 26.0 Gy, 36.5 Gy, and 54.0 Gy, respectively. A strong overlap (average DSC > 0.6) was observed between isodose skin lines and the shape of RID labels in all RID grades.

CONCLUSION

Assessing the spatial information of skin dose can be helpful in predicting acute RID. The region of RID shows a strong similarity with the skin dose distribution in head-neck patients. Visualization of skin dose on the patient photograph is potent to patient education for preparing the cosmetic discomfort during radiotherapy, which may lead to the improvement of the patient satisfaction in treatment.

A New Approach to Quantify and Grade Radiation Dermatitis Using Deep-Learning Segmentation in Skin Photographs

AIMS

Objective evaluation of radiation dermatitis is important for analysing the correlation between the severity of radiation dermatitis and dose distribution in clinical practice and for reliable reporting in clinical trials. We developed a novel radiation dermatitis segmentation system based on convolutional neural networks (CNNs) to consistently evaluate radiation dermatitis.

MATERIALS AND METHODS

The radiation dermatitis segmentation system is designed to segment the radiation dermatitis occurrence area using skin photographs and skin-dose distribution. A CNN architecture with a dilated convolution layer and skip connection was designed to estimate the radiation dermatitis area. Seventy-three skin photographs obtained from patients undergoing radiotherapy were collected for training and testing. The ground truth of radiation dermatitis segmentation is manually delineated from the skin photograph by an experienced radiation oncologist and medical physicist. We converted the skin photographs to RGB (red-green-blue) and CIELAB (lightness (L^∗), red-green (a^∗) and blue-yellow (b^∗)) colour information and trained the network to segment faint and severe radiation dermatitis using three different input combinations: RGB, RGB + CIELAB (RGBLAB) and RGB + CIELAB + skin-dose distribution (RGBLAB_D). The proposed system was evaluated using the Dice similarity coefficient (DSC), sensitivity, specificity and normalised Matthews correlation coefficient (nMCC). A paired t-test was used to compare the results of different segmentation performances.

RESULTS

Optimal data composition was observed in the network trained for radiation dermatitis segmentation using skin photographs and skin-dose distribution. The average DSC, sensitivity, specificity and nMCC values of RGBLAB_D were 0.62, 0.61, 0.91 and 0.77, respectively, in faint radiation dermatitis, and 0.69, 0.78, 0.96 and 0.83, respectively, in severe radiation dermatitis.

CONCLUSION

Our study showed that CNN-based radiation dermatitis segmentation in skin photographs of patients undergoing radiotherapy can describe radiation dermatitis severity and pattern. Our study could aid in objectifying the radiation dermatitis grading and analysing the reliable correlation between dosimetric factors and the morphology of radiation dermatitis.

Gut- and oral-dysbiosis differentially impact spinal- and bulbar-onset ALS, predicting ALS severity and potentially determining the location of disease onset

BACKGROUND

Prior studies on the role of gut-microbiome in Amyotrophic Lateral Sclerosis (ALS) pathogenesis have yielded conflicting results. We hypothesized that gut- and oral-microbiome may differentially impact two clinically-distinct ALS subtypes (spinal-onset ALS (sALS) vs. bulbar-onset ALS (bALS), driving disagreement in the field.

METHODS

ALS patients diagnosed within 12 months and their spouses as healthy controls (n = 150 couples) were screened. For eligible sALS and bALS patients (n = 36) and healthy controls (n = 20), 16S rRNA next-generation sequencing was done in fecal and saliva samples after DNA extractions to examine gut- and oral-microbiome differences. Microbial translocation to blood was measured by blood lipopolysaccharide-binding protein (LBP) and 16S rDNA levels. ALS severity was assessed by Revised ALS Functional Rating Scale (ALSFRS-R).

RESULTS

sALS patients manifested significant gut-dysbiosis, primarily driven by increased fecal Firmicutes/Bacteroidetes-ratio (F/B-ratio). In contrast, bALS patients displayed significant oral-dysbiosis, primarily driven by decreased oral F/B-ratio. For sALS patients, gut-dysbiosis (a shift in fecal F/B-ratio), but not oral-dysbiosis, was strongly associated with greater microbial translocation to blood (r = 0.8006, P < 0.0001) and more severe symptoms (r = 0.9470, P < 0.0001). In contrast, for bALS patients, oral-dysbiosis (a shift in oral F/B-ratio), but not gut-dysbiosis, was strongly associated with greater microbial translocation to blood (r = 0.9860, P < 0.0001) and greater disease severity (r = 0.9842, P < 0.0001). For both ALS subtypes, greater microbial translocation was associated with more severe symptoms (sALS: r = 0.7924, P < 0.0001; bALS: r = 0.7496, P = 0.0067). Importantly, both sALS and bALS patients displayed comparable oral-motor deficits with associations between oral-dysbiosis and severity of oral-motor deficits in bALS but not sALS. This suggests that oral-dysbiosis is not simply caused by oral/bulbar/respiratory symptoms but represents a pathological driver of bALS.

CONCLUSIONS

We found increasing gut-dysbiosis with worsening symptoms in sALS patients and increasing oral-dysbiosis with worsening symptoms in bALS patients. Our findings support distinct microbial mechanisms underlying two ALS subtypes, which have been previously grouped together as a single disease. Our study suggests correcting gut-dysbiosis as a therapeutic strategy for sALS patients and correcting oral-dysbiosis as a therapeutic strategy for bALS patients.

Acceptance of Illness Among Patients Pursuing Transplantation or Left Ventricular Assist Device

Acceptance of illness is related to better mental health among patients with chronic illness; however, this construct has not been evaluated as part of routine transplantation evaluations. The purpose of this study was to create a brief measure of acceptance of illness for patients pursuing organ transplantation and examine how acceptance is related to distress. Retrospective medical record reviews were conducted for 290 patients who completed a routine psychosocial evaluation prior to transplant listing which included the Illness Acceptance Scale (IAS). Internal consistency for the IAS was excellent (Cronbach's alpha = .92). Illness acceptance was negatively correlated with depression, anxiety, and catastrophizing and was not related to health literacy or health numeracy. The IAS is a reliable and valid measure for patients who are pursuing thoracic transplant or left ventricular assist device. Clinicians may want to screen transplant candidates for illness acceptance and refer those with lower levels to psychological interventions.

Predictors of Alcohol Use after Bariatric Surgery

Patients undergoing bariatric surgery are at risk for devloping an alcohol use disorder (AUD). The purpose of this study was to investigate pre-surgical psychosocial risk factors for post-surgical alcohol consumption and hazardous drinking. Participants (N = 567) who underwent bariatric surgery between 2014 and 2017 reported their post-surgical alcohol use. Information was collected from the pre-surgical evaluation including history of alcohol use, psychiatric symptoms, and maladaptive eating behaviors (i.e., binge eating, purging, and emotional eating). Younger age and pre-surgical alcohol use predicted post-surgical alcohol use and hazardous drinking. In addition, higher levels of depressive symptoms and maladaptive eating patterns predicted post-surgical binge drinking. Clinicians conducting pre-surgical psychosocial evaluations should be aware of the multiple risk factors related to post-surgical problematic alcohol use. Future research should evaluate whether preventive interventions for high-risk patients decrease risk for post-surgical alcohol misuse.

Improved visible-blindness of AlGaN deep ultraviolet photodiode with monolithically integrated angle-insensitive Fabry-Perot filter

Despite the rapidly increasing demand for accurate ultraviolet (UV) detection in various applications, conventional Si-based UV sensors are less accurate due to disruption by visible light. Recently, Ga(Al)N-based photodiodes have attracted great interest as viable platforms that can avoid such issues because their wide bandgap enables efficient detection of UV light and they are theoretically blind to visible and infrared light. However, the heteroepitaxy of a Ga(Al)N layer on sapphire substrates inevitably leads to defects, and the Ga(Al)N photodiode (PD) becomes not perfectly insensible to visible light. Employment of a dielectric stacked UV pass filter is possible to avoid unwanted absorption of visible light, but the angle-dependent pass band limits the detection angle. Here, we have demonstrated the Ag-Al₂O₃ Fabry-Perot UV pass filter-integrated AlGaN ultraviolet photodiode. The inherent optical extinction characteristics of Ag was utilized to design the fabrication-tolerant UV pass filter with a peak transmittance at ∼325 nm. As the angle of incidence increased, the peak transmission decreased from 45% to 10%, but the relative transmission spectrum remained almost unchanged. By integrating these filters, the visible light rejection ratio (responsivity for 315 nm light to responsivity for 405 nm light) was improved by a factor of 10, reaching a value of 10⁶ at angles of up to 80 degrees.

Long-term outcomes of laparoscopic large hiatus hernia repair with nonabsorbable mesh

The use of mesh to augment suture repair of large hiatus hernias remains controversial. Repair with mesh may help reduce the recurrence rate of primary repair, but concerns about the potential for serious complications, such as mesh erosion or stricturing, continue to limit its use. We aim to evaluate the long-term outcome of primary hiatus hernia repair with lightweight polypropylene mesh (TiMesh) specifically looking at rates of clinical recurrence, dysphagia, and mesh-related complications. From a prospectively maintained database, 50 consecutive patients who underwent elective primary laparoscopic hiatal hernia repair with TiMesh between January 2005 and December 2007 were identified. Case notes and postoperative endoscopy reports were reviewed. Clinical outcomes were evaluated using a structured questionnaire, including a validated dysphagia score. Of the 50 patients identified, 36 (72%) were contactable for follow-up. At a median follow-up of 9 years, the majority of patients (97%) regarded their surgery as successful. Twelve patients (33%) reported a recurrence of their symptoms, but only 4 (11%) reported that their symptoms were as severe as prior to the surgery. There was no significant difference between pre- and postoperative dysphagia scores. Postoperative endoscopy reports were available for 32 patients at a median time point of 4 years postoperatively, none of which revealed any mesh-related complications. One patient had undergone a revision procedure for a recurrent hernia at another institution. In this series, primary repair of large hiatus hernia with nonabsorbable mesh was not associated with any adverse effects over time. Patient satisfaction with symptomatic outcome remained high in the long term.

Patient-specific medial unicompartmental knee arthroplasty has a greater protective effect on articular cartilage in the lateral compartment: A Finite Element Analysis

OBJECTIVES

Patient-specific (PS) implantation surgical technology has been introduced in recent years and a gradual increase in the associated number of surgical cases has been observed. PS technology uses a patient's own geometry in designing a medical device to provide minimal bone resection with improvement in the prosthetic bone coverage. However, whether PS unicompartmental knee arthroplasty (UKA) provides a better biomechanical effect than standard off-the-shelf prostheses for UKA has not yet been determined, and still remains controversial in both biomechanical and clinical fields. Therefore, the aim of this study was to compare the biomechanical effect between PS and standard off-the-shelf prostheses for UKA.

METHODS

The contact stresses on the polyethylene (PE) insert, articular cartilage and lateral meniscus were evaluated in PS and standard off-the-shelf prostheses for UKA using a validated finite element model. Gait cycle loading was applied to evaluate the biomechanical effect in the PS and standard UKAs.

RESULTS

The contact stresses on the PE insert were similar for both the PS and standard UKAs. Compared with the standard UKA, the PS UKA did not show any biomechanical effect on the medial PE insert. However, the contact stresses on the articular cartilage and the meniscus in the lateral compartment following the PS UKA exhibited closer values to the healthy knee joint compared with the standard UKA.

CONCLUSION

The PS UKA provided mechanics closer to those of the normal knee joint. The decreased contact stress on the opposite compartment may reduce the overall risk of progressive osteoarthritis.Cite this article: K-T. Kang, J. Son, D-S. Suh, S. K. Kwon, O-R. Kwon, Y-G. Koh. Patient-specific medial unicompartmental knee arthroplasty has a greater protective effect on articular cartilage in the lateral compartment: A Finite Element Analysis. Bone Joint Res 2018;7:20-27. DOI: 10.1302/2046-3758.71.BJR-2017-0115.R2.

A computational simulation study to determine the biomechanical influence of posterior condylar offset and tibial slope in cruciate retaining total knee arthroplasty

Objectives

Posterior condylar offset (PCO) and posterior tibial slope (PTS) are critical factors in total knee arthroplasty (TKA). A computational simulation was performed to evaluate the biomechanical effect of PCO and PTS on cruciate retaining TKA.

Methods

We generated a subject-specific computational model followed by the development of ± 1 mm, ± 2 mm and ± 3 mm PCO models in the posterior direction, and -3°, 0°, 3° and 6° PTS models with each of the PCO models. Using a validated finite element (FE) model, we investigated the influence of the changes in PCO and PTS on the contact stress in the patellar button and the forces on the posterior cruciate ligament (PCL), patellar tendon and quadriceps muscles under the deep knee-bend loading conditions.

Results

Contact stress on the patellar button increased and decreased as PCO translated to the anterior and posterior directions, respectively. In addition, contact stress on the patellar button decreased as PTS increased. These trends were consistent in the FE models with altered PCO. Higher quadriceps muscle and patellar tendon force are required as PCO translated in the anterior direction with an equivalent flexion angle. However, as PTS increased, quadriceps muscle and patellar tendon force reduced in each PCO condition. The forces exerted on the PCL increased as PCO translated to the posterior direction and decreased as PTS increased.

Conclusion

The change in PCO alternatively provided positive and negative biomechanical effects, but it led to a reduction in a negative biomechanical effect as PTS increased.

Cite this article: K-T. Kang, Y-G. Koh, J. Son, O-R. Kwon, J-S. Lee, S. K. Kwon. A computational simulation study to determine the biomechanical influence of posterior condylar offset and tibial slope in cruciate retaining total knee arthroplasty. Bone Joint Res 2018;7:69–78. DOI: 10.1302/2046-3758.71.BJR-2017-0143.R1.

Spin-Orbit Coupling and Interband Transitions in the Optical Conductivity of Sr_{2}RhO_{4}

The prototypical correlated metal Sr_{2}RhO_{4} was studied using optical and photoemission spectroscopy. At low energies and temperatures, the optical data reveal a complex, multicomponent response that on the surface points to an unconventional metallic state in this material. Via a comparison with photoemission, the anomalous optical response may be attributed to an unexpectedly strong interband transition near 180 meV between spin-orbit coupled bands that are nearly parallel along ΓX. This spin-orbit coupling effect is shown to occur in a number of related metallic ruthenates and explains the previously puzzling optical properties reported for these materials.

Computational study on the effect of malalignment of the tibial component on the biomechanics of total knee arthroplasty: A Finite Element Analysis

Objectives

Malalignment of the tibial component could influence the long-term survival of a total knee arthroplasty (TKA). The object of this study was to investigate the biomechanical effect of varus and valgus malalignment on the tibial component under stance-phase gait cycle loading conditions.

Methods

Validated finite element models for varus and valgus malalignment by 3° and 5° were developed to evaluate the effect of malalignment on the tibial component in TKA. Maximum contact stress and contact area on a polyethylene insert, maximum contact stress on patellar button and the collateral ligament force were investigated.

Results

There was greater total contact stress in the varus alignment than in the valgus, with more marked difference on the medial side. An increase in ligament force was clearly demonstrated, especially in the valgus alignment and force exerted on the medial collateral ligament also increased.

Conclusion

These results highlight the importance of accurate surgical reconstruction of the coronal tibial alignment of the knee joint. Varus and valgus alignments will influence wear and ligament stability, respectively in TKA.

Cite this article: D-S. Suh, K-T. Kang, J. Son, O-R. Kwon, C. Baek, Y-G. Koh. Computational study on the effect of malalignment of the tibial component on the biomechanics of total knee arthroplasty: A Finite Element Analysis. Bone Joint Res 2017;6:623–630. DOI: 10.1302/2046-3758.611.BJR-2016-0088.R2.

Income Inequality and the Differential Effect of Adverse Childhood Experiences in US Children

OBJECTIVE

Adverse childhood experiences (ACEs) can affect health and development across the life course. Despite a general understanding that adversity is associated with lower income, we know less about how ACEs manifest at different income levels and how these income-related patterns affect children's health and development.

METHODS

Data from the 2011 to 2012 National Survey of Children's Health were used to examine the prevalence of 9 ACEs in US children, across 4 levels of household income, and in relationship to 5 parent-reported measures of child health. Bivariate analyses and multivariable logistic regression models were used to examine the associations between number of ACEs and children's health outcomes on the basis of the 4 income groups.

RESULTS

When partitioned according to income strata, the proportion of children who experienced ACEs showed a steep income gradient, particularly for children who experienced ≥4 ACEs. The linear gradient across income groups was less pronounced for each specific ACE, with several ACEs (experience of divorce, drug and alcohol exposure, parental mental illness) showing high reported prevalence in all but the highest income group. Multivariate analysis showed a consistent income-related gradient for each of the health outcomes. However, higher income was not necessarily found to be a protective factor against ACEs.

CONCLUSIONS

ACEs are distributed across the income ladder and not just concentrated below the poverty level. This suggests that a more comprehensive policy strategy that includes targeted as well as universal interventions is warranted.

Preservation of kinematics with posterior cruciate-, bicruciate- and patient-specific bicruciate-retaining prostheses in total knee arthroplasty by using computational simulation with normal knee model

Objectives

Preservation of both anterior and posterior cruciate ligaments in total knee arthroplasty (TKA) can lead to near-normal post-operative joint mechanics and improved knee function. We hypothesised that a patient-specific bicruciate-retaining prosthesis preserves near-normal kinematics better than standard off-the-shelf posterior cruciate-retaining and bicruciate-retaining prostheses in TKA.

Methods

We developed the validated models to evaluate the post-operative kinematics in patient-specific bicruciate-retaining, standard off-the-shelf bicruciate-retaining and posterior cruciate-retaining TKA under gait and deep knee bend loading conditions using numerical simulation.

Results

Tibial posterior translation and internal rotation in patient-specific bicruciate-retaining prostheses preserved near-normal kinematics better than other standard off-the-shelf prostheses under gait loading conditions. Differences from normal kinematics were minimised for femoral rollback and internal-external rotation in patient-specific bicruciate-retaining, followed by standard off-the-shelf bicruciate-retaining and posterior cruciate-retaining TKA under deep knee bend loading conditions. Moreover, the standard off-the-shelf posterior cruciate-retaining TKA in this study showed the most abnormal performance in kinematics under gait and deep knee bend loading conditions, whereas patient-specific bicruciate-retaining TKA led to near-normal kinematics.

Conclusion

This study showed that restoration of the normal geometry of the knee joint in patient-specific bicruciate-retaining TKA and preservation of the anterior cruciate ligament can lead to improvement in kinematics compared with the standard off-the-shelf posterior cruciate-retaining and bicruciate-retaining TKA.

Cite this article: Y-G. Koh, J. Son, S-K. Kwon, H-J. Kim, O-R. Kwon, K-T. Kang. Preservation of kinematics with posterior cruciate-, bicruciate- and patient-specific bicruciate-retaining prostheses in total knee arthroplasty by using computational simulation with normal knee model. Bone Joint Res 2017;6:557–565. DOI: 10.1302/2046-3758.69.BJR-2016-0250.R1.

The effects of posterior cruciate ligament deficiency on posterolateral corner structures under gait- and squat-loading conditions: A computational knee model

Objectives

The aim of the current study was to analyse the effects of posterior cruciate ligament (PCL) deficiency on forces of the posterolateral corner structure and on tibiofemoral (TF) and patellofemoral (PF) contact force under dynamic-loading conditions.

Methods

A subject-specific knee model was validated using a passive flexion experiment, electromyography data, muscle activation, and previous experimental studies. The simulation was performed on the musculoskeletal models with and without PCL deficiency using a novel force-dependent kinematics method under gait- and squat-loading conditions, followed by probabilistic analysis for material uncertain to be considered.

Results

Comparison of predicted passive flexion, posterior drawer kinematics and muscle activation with experimental measurements showed good agreement. Forces of the posterolateral corner structure, and TF and PF contact forces increased with PCL deficiency under gait- and squat-loading conditions. The rate of increase in PF contact force was the greatest during the squat-loading condition. The TF contact forces increased on both medial and lateral compartments during gait-loading conditions. However, during the squat-loading condition, the medial TF contact force tended to increase, while the lateral TF contact forces decreased. The posterolateral corner structure, which showed the greatest increase in force with deficiency of PCL under both gait- and squat-loading conditions, was the popliteus tendon (PT).

Conclusion

PCL deficiency is a factor affecting the variability of force on the PT in dynamic-loading conditions, and it could lead to degeneration of the PF joint.

Cite this article: K-T. Kang, Y-G. Koh, M. Jung, J-H. Nam, J. Son, Y.H. Lee, S-J. Kim, S-H. Kim. The effects of posterior cruciate ligament deficiency on posterolateral corner structures under gait- and squat-loading conditions: A computational knee model. Bone Joint Res 2017;6:31–42. DOI: 10.1302/2046-3758.61.BJR-2016-0184.R1.

Measuring the effect of femoral malrotation on knee joint biomechanics for total knee arthroplasty using computational simulation

Objectives

Malrotation of the femoral component can result in post-operative complications in total knee arthroplasty (TKA), including patellar maltracking. Therefore, we used computational simulation to investigate the influence of femoral malrotation on contact stresses on the polyethylene (PE) insert and on the patellar button as well as on the forces on the collateral ligaments.

Materials and Methods

Validated finite element (FE) models, for internal and external malrotations from 0° to 10° with regard to the neutral position, were developed to evaluate the effect of malrotation on the femoral component in TKA. Femoral malrotation in TKA on the knee joint was simulated in walking stance-phase gait and squat loading conditions.

Results

Contact stress on the medial side of the PE insert increased with internal femoral malrotation and decreased with external femoral malrotation in both stance-phase gait and squat loading conditions. There was an opposite trend in the lateral side of the PE insert case. Contact stress on the patellar button increased with internal femoral malrotation and decreased with external femoral malrotation in both stance-phase gait and squat loading conditions. In particular, contact stress on the patellar button increased by 98% with internal malrotation of 10° in the squat loading condition. The force on the medial collateral ligament (MCL) and the lateral collateral ligament (LCL) increased with internal and external femoral malrotations, respectively.

Conclusions

These findings provide support for orthopaedic surgeons to determine a more accurate femoral component alignment in order to reduce post-operative PE problems.

Cite this article: K-T. Kang, Y-G. Koh, J. Son, O-R. Kwon, C. Baek, S. H. Jung, K. K. Park. Measuring the effect of femoral malrotation on knee joint biomechanics for total knee arthroplasty using computational simulation. Bone Joint Res 2016;5:552–559. DOI: 10.1302/2046-3758.511.BJR-2016-0107.R1.

When β-cells fail: lessons from dedifferentiation

Diabetes is caused by a combination of impaired responsiveness to insulin and reduced production of insulin by the pancreas. Until recently, the decline of insulin production had been ascribed to β-cell death. But recent research has shown that β-cells do not die in diabetes, but undergo a silencing process, termed "dedifferentiation." The main implication of this discovery is that β-cells can be revived by appropriate treatments. We have shown that mitochondrial abnormalities are a key step in the progression of β-cell dysfunction towards dedifferentiation. In normal β-cells, mitochondria generate energy required to sustain insulin production and its finely timed release in response to the body's nutritional status. A normal β-cell can adapt its mitochondrial fuel source based on substrate availability, a concept known as "metabolic flexibility." This capability is the first casualty in the progress of β-cell failure. β-Cells lose the ability to select the right fuel for mitochondrial energy production. Mitochondria become overloaded, and accumulate by-products derived from incomplete fuel utilization. Energy production stalls, and insulin production drops, setting the stage for dedifferentiation. The ultimate goal of these investigations is to explore novel treatment paradigms that will benefit people with diabetes.