Low-temperature dissociation of CO2 molecules on vicinal Cu surfaces

The reaction of carbon dioxide on the vicinal Cu surfaces at low temperatures was investigated by infrared reflection absorption spectroscopy, scanning tunneling microscopy, X-ray photoelectron spectroscopy, and quadrupole mass spectrometry. Dissociation of CO2 molecules into CO on the Cu(997) and Cu(977) surfaces was observed at temperatures between 80 K and 90 K, whereas it did not occur on Cu(111) under a similar condition. CO and physisorbed CO2 were the main adsorbates during the reaction. In contrast, the amount of atomic oxygen on the surface was small. The dissociation of CO2 was promoted by the small amount of oxygen produced by the CO2 dissociation on the Cu surfaces. This leads to the induction period in the CO2 reaction; the initial reaction rate on the clean Cu surfaces was low, and the coadsorbed oxygen enhanced the dissociation reactivity of CO2. Mass analysis of desorption species during the reaction revealed that the observed CO formation on the vicinal Cu surface is mainly caused by an oxygen-exchange reaction with residual CO in an ultra-high vacuum chamber.

Hydrogen-induced Sulfur Vacancies on the MoS2 Basal Plane Studied by Ambient Pressure XPS and DFT Calculations

Sulfur vacancy on an MoS2 basal plane plays a crucial role in device performance and catalytic activity; thus, an understanding of the electronic states of sulfur vacancies is still an important issue. We investigate the electronic states on an MoS2 basal plane by ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory calculations while heating the system in hydrogen. The AP-XPS results show a decrease in the intensity ratio of S 2p to Mo 3d, indicating that sulfur vacancies are formed. Furthermore, low-energy components are observed in Mo 3d and S 2p spectra. To understand the changes in the electronic states induced by sulfur vacancy formation at the atomic scale, we calculate the core-level binding energies for the model vacancy surfaces. The calculated shifts for Mo 3d and S 2p with the formation of sulfur vacancy are consistent with the experimentally observed binding energy shifts. Mulliken charge analysis indicates that this is caused by an increase in the electronic density associated with the Mo and S atoms around the sulfur vacancy as compared to the pristine surface. The present investigation provides a guideline for sulfur vacancy engineering.

Prediction of the superimposed laser shot number for copper using a deep convolutional neural network

Image-based deep learning (IBDL) is an advanced technique for predicting the surface irradiation conditions of laser surface processing technology. In pulsed-laser surface processing techniques, the number of superimposed laser shots is one of the fundamental and essential parameters that should be optimized for each material. Our primary research aims to build an adequate dataset using laser-irradiated surface images and to successfully predict the number of superimposed shots using the pre-trained deep convolutional neural network (CNN) models. First, the laser shot experiments were performed on copper targets using a nanosecond YAG laser with a wavelength of 532 nm. Then, the training data were obtained with the different superimposed shots of 1 to 1024 in powers of 2. After that, we used several pre-trained deep CNN models to predict the number of superimposed laser shots. Based on the dataset with 1936 images, VGG16 shows a high validation accuracy, higher sensitivity, and more than 99% precision than other deep CNN models. Utilizing the VGG16 model with high sensitivity could positively impact the industries' time, efficiency, and overall production.

Effect of high ambient temperature on physiological responses during incremental exercise in Thoroughbred horses

Several reports have suggested that the risk of exertional heat illness (EHI) in Thoroughbred racehorses increases in high ambient temperatures. Heat dissipation in horses during exercise becomes less efficient when the body temperature and ambient temperature are close. Therefore, we hypothesised that exercise at 40 °C may increase body temperature, oxygen consumption, and cardiac output during incremental exercise tests compared to 20 and 30 °C. Six trained Thoroughbred horses were studied in a randomised, crossover design at three ambient temperatures with a 6-day washout period. Using a 3% inclined treadmill, horses performed incremental exercise tests at 1.7, 3.5, 6, 8, and 10 m/s for 90 s at ambient temperatures of 20, 30, and 40 °C. The effects of ambient temperature at 10 m/s on physiological variables were analysed using mixed models (P<0.05). Pulmonary arterial temperature and rectal temperature at 40 °C were higher than those at 20 °C (P<0.001) and 30 °C (P<0.001). Similarly, oxygen consumption (vs 20 °C, P=0.009; vs 30 °C, P=0.006) and cardiac output (vs 20 °C, P=0.001; vs 30 °C, P=0.001) at 40 °C were higher than those at 20 and 30 °C. Arterial O2 partial pressure, O2 saturation, and pH at 40 °C were lower than those at 20 and 30 °C. Arterial CO2 partial pressure at 40 °C was higher than that at 20 and 30 °C. No differences were observed in arterial-mixed venous O2 concentration difference (P=0.391) and plasma lactate concentration (P=0.134) at different ambient temperatures. These results indicate that exercise at 40 °C causes excessive high body temperature, decreased running economy, and increased cardiac output compared to exercise at 20 and 30 °C. We strongly suggest that trainers and veterinarians should anticipate the occurrence of increased thermal stresses when ambient temperature is extremely high even in dry conditions and prepare to mitigate the risk of EHI from the perspective of equine welfare.

Self-Sustained Divertor Oscillation Driven by Magnetic Island Dynamics in Torus Plasma

A new type of self-sustained divertor oscillation is discovered in the Large Helical Device stellarator, where the peripheral plasma is detached from material diverters by means of externally applied perturbation fields. The divertor oscillation is found to be a self-regulation of an isolated magnetic field structure (the magnetic island) width induced by a drastic change in a poloidal inhomogeneity of the plasma radiation across the detachment-attachment transitions. A predator-prey model between the magnetic island width and a self-generated local plasma current (the bootstrap current) is introduced to describe the divertor oscillation, which successfully reproduces the experimental observations.

Effect of post-exercise muscle cooling on PGC-1α and VEGF mRNA expression in Thoroughbreds

Besides preventing exertional heat illness, muscle cooling can be a potential strategy to enhance exercise-training induced adaptations. This study aimed to examine the effects of post-exercise cooling on the mRNA expression of peroxisome proliferator-activated receptor gamma coactivator 1-alpha (PGC-1α) and vascular endothelial growth factor (VEGF) in Thoroughbred skeletal muscle. Five Thoroughbred horses performed treadmill running until their pulmonary artery temperature reached 42 °C, followed by walking on the treadmill with no additional cooling (CONT) or muscle cooling with a shower using the tap water (26 °C, 0.4 l/s; COOL), for 30 min. Muscle biopsies were obtained before (PRE) and 3 h after exercise (3 Hr-REC) from the gluteus medius muscle. PGC-1α mRNA expression was elevated 3 h after exercise in both the CONT (PRE vs 3 Hr-REC: 1.0±0.1 vs 5.0±0.8, P<0.01) and COOL (PRE vs 3 Hr-REC: 1.1±0.3 vs 6.6±0.9, P<0.01) conditions; however, there was no difference between the two conditions at 3 h after exercise (P=0.17). VEGF mRNA expression was elevated 3 h after exercise in COOL (PRE vs 3 Hr-REC: 1.0±0.2 vs 2.2±0.2, P<0.05) but not in CONT (PRE vs 3 Hr-REC: 1.0±0.1 vs 1.8±0.3, P=0.08). VEGF mRNA expression at 3 h after exercise was significantly negatively correlated with rectal temperature at the end of the 30-min cooling period (r = -0.65, P<0.05). Our results suggest that the decline in body temperature after exercise may lead to greater expression of the key angiogenic gene in Thoroughbred horses.

Elucidation of the atomic-scale processes of dissociative adsorption and spillover of hydrogen on the single atom alloy catalyst Pd/Cu(111)

Hydrogen spillover is a crucial process in the selective hydrogenation reactions on Pd/Cu single atom alloy catalysts. In this study, we report the atomic-scale perspective of these processes on the...

A new multi-tracer pellet injection for a simultaneous study of low- and mid/high-Z impurities in high-temperature plasmas

A new multi-tracer technique in the Tracer-Encapsulated Solid Pellet (TESPEL) method has been developed in order to acquire simultaneously the information about the behaviors of various impurities, i.e., to study concurrently the behaviors of low- and mid/high-Z impurities in magnetically confined high-temperature plasmas. In this new technique, an inorganic compound (for example, lithium titanate, Li₂TiO₃) is proposed to be used as a tracer embedded in the core of the TESPEL, instead of pure elements. The results of the proof-of-principle experiment clearly demonstrate the applicability of the new multi-tracer technique in the TESPEL method for the simultaneous study of behaviors of low- and mid/high-Z impurities in high-temperature plasmas.

Sensitivity improvement of infrared imaging video bolometer for divertor plasma measurement

The sensitivity of an infrared imaging video bolometer (IRVB) was improved for the measurement of relatively low energy plasma radiation from the viewpoint of the metal foil absorber material. The photon energy of the radiation was considered up to 1 keV for the divertor plasma measurement. The thickness of the foil absorber was evaluated not only for conventional heavy elements, e.g., platinum, but also for light elements by the relation between the photon energy and attenuation length and by mechanical strength. A heat-transfer calculation using ANSYS suggested that light elements with practical foil thickness provide a higher temperature rise of the foil absorber compared with heavier elements with practical foil thickness. The maximum of the temperature rise was evaluated using He-Ne laser irradiation onto absorber samples. The material dependence of the temperature rise has a similar tendency between calculations and experiments. Experimentally, the sensitivity of the IRVB improved from 280 to 110 µW/cm² using titanium with 1 µm thickness compared with conventional platinum with 2.5 µm thickness. Consequently, the signal-to-noise ratio of the IRVB could be improved from 2.8 to 9.1.

Development of a weighted sum estimate of the total radiated power from large helical device plasma

Diagnosing the amount of radiated power is an important research goal for fusion devices. This research aims at better understanding and diagnosing the radiated power from the Large Helical Device (LHD). The current radiated power estimate in the LHD is based on one wide-angle resistive bolometer. Because the estimate stems from one bolometer location toroidally and has a wide-angle poloidal view, this estimate does not take into account toroidal and poloidal radiation asymmetries that are observed in the LHD in discharges with gas puffing. This research develops a method based on the EMC3-Eirene model to calculate the set of coefficients for a weighted-sum method of estimating the radiated power. This study calculates these coefficients by using a least-squares method to solve for a coefficient set, using a variety of simulated cases generated by the EMC3-Eirene model, combined with corresponding geometric radiated power density considerations. If this set of coefficients is multiplied by the detector signal of each bolometer and summed up, this gives a total radiated power estimate. This new estimate takes into account toroidal and poloidal asymmetries by using the bolometer channels viewing different toroidal and poloidal locations, thereby reducing the estimation error and providing information about toroidal asymmetries.

Changes in muscle activity with exercise-induced fatigue in Thoroughbred horses

Understanding the effects of fatigue can provide guidance for training regimens and injury prevention. We have previously reported that the integrated-electromyogram (iEMG) values of the M. gluteus medius and brachiocephalicus decreased with exercise-induced fatigue, whereas those of the M. longissimus dorsi and infraspinatus were not affected. We hypothesised that exercise-induced fatigue would decrease the activities of the muscles associated with propulsive force but not associated with joint stabilisation. Surface EMG recordings of the forelimb muscles (M. triceps brachii, common digital extensor, ulnaris lateralis), and hindlimb muscles (M. semitendinosus, extensor digitorum longus, extensor digitorum lateralis and flexor digitorum lateralis) were conducted on eight Thoroughbreds. Horses galloped on a treadmill (grade, 3%) at a constant speed (12.6-14.8 m/s) until they could not maintain their position with minimal human encouragement (~5 min). The stride frequency, iEMG for a stride and median frequency during muscle discharge were calculated every 30 s. These parameters were compared between the start and end of the test phase for the leading and trailing limbs. The stride frequency (P<0.01) and iEMG values of the M. semitendinosus in both the leading (P<0.01) and trailing limbs (P<0.05) and those of the M. extensor digitorum longus in the trailing limbs (P<0.05) significantly decreased at the end of the test. No median frequency changes were observed in the assessed muscles. Although muscular fatigue itself was not detected, observed fatigue caused by high-intensity exercise resulted in inability to maintain speed, which was associated with decreased iEMG values in the hip extensor muscles that generate propulsive force. In contrast, almost all muscles that stabilise joints were unaffected by fatigue. One exception was the decreased muscle activity observed in the M. extensor digitorum longus of the trailing limb, which may suggest unstable ground contact. Muscle activity changes with fatigue might be associated with muscle functions.

Clinical impact of triglyceride deposit cardiomyovasculopathy, coronary atherosclerosis with triglyceride deposition, on vascular failure after drug-eluting stent implantation

Background

Triglyceride deposit cardiomyovasculopathy (TGCV) is a novel cardiovascular disorder, encoded as orphan disease in Europe in 2019, characterized by excessive accumulation of triglyceride in vascular smooth muscle cells, leading to coronary artery disease (CAD). However, there is no data about impact of TGCV on vascular failure after coronary stent implantation.

Purpose

To assess impact of TGCV on the outcome following coronary stent implantation in CAD patients with diabetes mellitus (DM) as Study 1, and chronic hemodialysis as Study 2.

Methods

This is multicenter retrospective estimation consisting of two studies.

Study 1) Among 526 consecutive patients suspected of having CAD who underwent coronary angiography (CAG) and iodine-123-β-methyliodophenyl-pentadecanoic acid (BMIPP) scintigraphy, a tracer for the diagnosis of TGCV, data from 81 patients with DM were analyzed.

The patients were divided into two groups; TGCV (n=7) or non-TGCV (n=74). All patients were implanted with a second-generation DES and underwent follow-up CAG. Binary restenosis (ISR), defined as angiographic luminal diameter &gt;50% by quantitative coronary angiography, in-stent late loss were assessed in 15 stents of TGCV patients and 111 stents of non-TGCV patients.

Study 2) Similarly, among 88 chronic hemodialysis patients, ISR and in-stent late loss were assessed in 12 stents of 9 TGCV patients and 21 stents of 17 non-TGCV patients.

Results

Study 1) There were no significant differences in baseline characteristics between the two groups. In-stent late loss was greater in TGCV group than in non-TGCV group (0.91mm [0.27, 2.39] vs. 0.15mm [0.03, 0.35]; p&lt;0.001), resulting in greater incidence of ISR in TGCV group than in non-TGCV group (46.7% vs. 9.0%; p&lt;0.001). Multivariable logistic analysis revealed TGCV to be an independent predictor for vascular failure after DES implantation in patients with DM.

Study 2) Similarly, in-stent late loss and incidence of ISR were greater in TGCV group than in non-TGCV group (1.20±0.99mm vs. 0.50±0.70, p=0.02; 58.3% vs. 9.5%, p=0.002, respectively). TGCV was an independent predictor for vascular failure after DES implantation in chronic hemodialysis patients.

Conclusion

Apart from existing risk factors such as DM and hemodialysis, TGCV could contribute to a novel risk factor for vascular failure, even in the second-generation DES era.

Figure 1

Funding Acknowledgement

Type of funding source: None

Effect of lactate administration on exercise-induced PGC-1α mRNA expression in Thoroughbreds

The aim of this study was to examine the effects of lactate administration on the mRNA response of peroxisome proliferator-activated receptor gamma coactivator 1-alpha (PGC-1α) to acute exercise in Thoroughbred skeletal muscle. Five Thoroughbred horses performed treadmill running at 90% of maximal oxygen consumption for 2 min on two separate occasions, either after the administration of two litres of a sodium lactate solution (LAC; 500 mmol/l sodium lactate in 0.9% NaCl) or a saline solution as a control (CON; 0.9% NaCl). Lactate administration significantly elevated the peak plasma lactate concentration during exercise (16.0±2.8 mmol/l in LAC vs 10.8±2.2 mmol/l in CON). The increase in PGC-1α mRNA expression after 4 h of recovery from exercise was similar between treatments. However, there was positive correlation between exercise-induced PGC-1α mRNA response at 4 h after exercise and peak plasma lactate concentration during exercise. These results suggest that the exercise intensity-dependent adaptation of PGC-1α may be attributed, at least in part, to an increased lactate concentration.

The roles of step-site and zinc in surface chemistry of formic acid on clean and Zn-modified Cu(111) and Cu(997) surfaces studied by HR-XPS, TPD, and IRAS

The adsorption, desorption, and decomposition of formic acid (HCOOH) on Cu(111), Cu(997), Zn-Cu(111), and Zn-Cu(997) were systematically studied by high-resolution x-ray photoelectron spectroscopy, temperature programmed desorption, and infrared reflection absorption spectroscopy. On the clean Cu(111) surface, 13% of formic acid molecules adsorbed at 83 K were dissociated to form bidentate formate species by heating at 300 K; however, on the Zn-Cu(111) surface, only 4% of adsorbed HCOOH molecules were dissociated into the bidentate formate species. On the contrary, 13% of adsorbed HCOOH molecules were already dissociated into monodentate formate species on Cu(997) even at 83 K and 17% of adsorbed formic acid molecules were transformed to bidentate formate species by heating at 300 K, indicating that the stepped Cu surface has higher reactivity for HCOOH dissociation at low temperature. On the Zn-Cu(997) surface, 20% of formic acid became bidentate formate species in contrast to the case with Zn-Cu(111). Thus, the Zn deposited Cu step surface shows special activity for adsorption and dissociation of formic acid. The desorption peak maxima of the formate decomposition products (CO₂ and H₂) on Zn-Cu(997) were shifted to higher temperatures than those on Cu(997). Zn on Cu surfaces plays an important role in the stabilization of formate species, which probably leads to the decrease in the activation barrier for hydrogenation on the Zn-Cu alloyed surface.

P5633Diagnostic impact of resting full-cycle ratio as newly developed non-hyperemic indices for physiological lesion assessment

Background

Although fractional flow reserve (FFR) is a gold standard method to evaluate functional lesion severity in the catheterization laboratory, the need of hyperemic condition limits the widespread adoption of FFR. Recently, the resting full-cycle ratio (RFR) which was newly developed resting indices was launched. It is unclear whether RFR as resting condition could assess physiological lesion severity of coronary artery stenosis. The aim of this study was to evaluate the diagnostic impact of RFR compared to FFR in entire range of coronary artery stenosis.

Method

A total of 53 patients with 70 lesions were enrolled in this study. The RFR was measured after adequately waiting for stable condition, while FFR was measured after intravenous administration of ATP (180mcg/kg/min). Lesions with FFR ≤0.80 were considered functionally significant coronary artery stenosis.

Results

In all lesions, reference diameter, diameter stenosis, lesion length, RFR, and FFR were 3.3±0.8mm, 44±12%, 14.6±7.2mm, 0.90±0.11, and 0.83±0.11, respectively. Functional significance was observed in 24 lesions (34%) of all lesions. The RFR showed a significant correlation with FFR (y = 0.800x + 0.239, R = 0.817, p<0.001). The Bland-Altman plot demonstrated a good agreement with a mean difference of 0.07 and a standard deviation of 0.06 between RFR and FFR across entire range of coronary artery stenosis. ROC curve analysis showed an excellent accuracy of RFR cut-off of ≤0.90 in predicting FFR ≤0.80 which had 78% sensitivity and 87% specificity (AUC 0.87, diagnostic accuracy 84%).

Conclusion

The RFR as newly resting indices is reliable to the assessment of functional lesion severity. This physiology-based approach may be a possible alternative method for FFR measurements in daily practice.

Improvement of infrared imaging video bolometer for application to deuterium experiment on the large helical device

An infrared imaging video bolometer was improved for application to a neutron environment in fusion plasma devices, i.e., the Large Helical Device (LHD). In order to calibrate the thermal characteristics of the activated foil absorber inside the plasma vacuum vessel, the remote-controlled in situ calibration system was improved with high-surface-flatness mirrors. Furthermore, the carbon coating method was improved by introducing a vacuum evaporation technique instead of the conventional spray technique to realize the coating on both sides of the absorber with reproducibility and uniformity. The optimal thickness of the coating was also determined. Owing to these coating improvements, the reproducibility of the effective emissivity on both sides especially was improved. Finally, the variation with the neutron irradiation of the thermal characteristics of the foil absorber was investigated. It was found that the effect was not significant for the total neutron emission of 3.6 × 10¹⁸ on LHD.

Experimental tests of an infrared video bolometer on Alcator C-Mod

A prototype of an infrared imaging bolometer (IRVB) was successfully tested on the Alcator C-Mod tokamak at the end of its 2016 campaign. The IRVB method interprets the power radiated from the plasma by measuring the temperature rise of a thin, ∼2 μm, Pt absorber that is placed in the torus vacuum and exposed, using a pinhole camera, to the full-spectrum of plasma's photon emission. The IRVB installed on C-Mod viewed the poloidal cross section of the core plasma and observed Ohmic and ion cyclotron range of frequency (ICRF)-heated plasmas. Analysis of total radiated power and on-axis emissivity from IRVB is summarized, and quantitative comparisons made to data from both resistive bolometers and AXUV diodes. IRVB results are clearly within a factor of two, but additional effort is needed for it to be used to fully support power exhaust research. The IRVB is shown to be immune to electromagnetic interference from ICRF which strongly impacts C-Mod's resistive bolometers. Results of the bench-top calibration are summarized, including a novel temperature calibration method useful for IRVBs.

Enhancement of CO2 adsorption on oxygen-functionalized epitaxial graphene surface under near-ambient conditions

The functionalization of graphene is important in practical applications of graphene, such as in catalysts. However, the experimental study of the interactions of adsorbed molecules with functionalized graphene is difficult under ambient conditions at which catalysts are operated. Here, the adsorption of CO2 on an oxygen-functionalized epitaxial graphene surface was studied under near-ambient conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). The oxygen-functionalization of graphene is achieved in situ by the photo-induced dissociation of CO2 with X-rays on graphene in a CO2 gas atmosphere. The oxygen species on the graphene surface is identified as the epoxy group by XPS binding energies and thermal stability. Under near-ambient conditions of 1.6 mbar CO2 gas pressure and 175 K sample temperature, CO2 molecules are not adsorbed on the pristine graphene, but are adsorbed on the oxygen-functionalized graphene surface. The increase in the adsorption energy of CO2 on the oxygen-functionalized graphene surface is supported by first-principles calculations with the van der Waals density functional (vdW-DF) method. The adsorption of CO2 on the oxygen-functionalized graphene surface is enhanced by both the electrostatic interactions between the CO2 and the epoxy group and the vdW interactions between the CO2 and graphene. The detailed understanding of the interaction between CO2 and the oxygen-functionalized graphene surface obtained in this study may assist in developing guidelines for designing novel graphene-based catalysts.

CO2 adsorption on the copper surfaces: van der Waals density functional and TPD studies

We investigated the adsorption of CO₂ on the flat, stepped, and kinked copper surfaces from density functional theory calculations as well as the temperature programmed desorption and X-ray photoelectron spectroscopy. Several exchange-correlation functionals have been considered to characterize CO₂ adsorption on the copper surfaces. We used the van der Waals density functionals (vdW-DFs), i.e., the original vdW-DF (vdW-DF1), optB86b-vdW, and rev-vdW-DF2, as well as the Perdew-Burke-Ernzerhof (PBE) with dispersion correction (PBE-D2). We have found that vdW-DF1 and rev-vdW-DF2 functionals slightly underestimate the adsorption energy, while PBE-D2 and optB86b-vdW functionals give better agreement with the experimental estimation for CO₂ on Cu(111). The calculated CO₂ adsorption energies on the flat, stepped, and kinked Cu surfaces are 20-27 kJ/mol, which are compatible with the general notion of physisorbed species on solid surfaces. Our results provide a useful insight into appropriate vdW functionals for further investigation of related CO₂ activation on Cu surfaces such as methanol synthesis and higher alcohol production.

Caries-related Bacteria and Cytokines Induce CXCL10 in Dental Pulp

Marked infiltration of inflammatory cells, such as activated T-cells, is observed in the progression of pulpitis; however, little is known about the mechanism of their recruitment into pulpal lesions. It has been recently demonstrated that CXC chemokine ligand 10 (CXCL10) chemoattracts CXC chemokine receptor 3 (CXCR3)-positive activated T-cells. We therefore examined whether CXCL10 is involved in the pathogenesis of pulpitis. CXCL10 mRNA expression levels in clinically inflamed dental pulp were higher than those in healthy dental pulp. Immunostaining results revealed that CXCL10 was detected in macrophages, endothelial cells, and fibroblasts in inflamed dental pulp, and that CXCR3 expression was observed mainly on T-cells. Moreover, cultured dental pulp fibroblasts produced CXCL10 after stimulation with live caries-related bacteria, peptidoglycans, and pro-inflammatory cytokines. In contrast, heat-killed bacteria did not induce CXCL10 secretion. These findings suggest that CXCL10-CXCR3 may play an important role in the pulpal immune response to caries-related bacterial invasion. Abbreviations: CXCL10, CXC chemokine ligand 10; CXCR3, CXC chemokine receptor 3; IFN, interferon; FBS, fetal bovine serum; LTA, lipoteichoic acid; PGN, peptidoglycan; IL, interleukin; TNF, tumor necrosis factor; PBS, phosphate-buffered saline; ELISA, enzyme-linked immunosorbent assay; CCL, C-C chemokine ligand; TLR, Toll-like receptor; NOD, nucleotide oligomerization domain; HDPF, human dental pulp fibroblasts.

In situ calibration of the foil detector for an infrared imaging video bolometer using a carbon evaporation technique

The InfraRed imaging Video Bolometer (IRVB) is a useful diagnostic for the multi-dimensional measurement of plasma radiation profiles. For the application of IRVB measurement to the neutron environment in fusion plasma devices such as the Large Helical Device (LHD), in situ calibration of the thermal characteristics of the foil detector is required. Laser irradiation tests of sample foils show that the reproducibility and uniformity of the carbon coating for the foil were improved using a vacuum evaporation method. Also, the principle of the in situ calibration system was justified.

Design and characterization of a prototype divertor viewing infrared video bolometer for NSTX-U

The InfraRed Video Bolometer (IRVB) is a powerful tool to measure radiated power in magnetically confined plasmas due to its ability to obtain 2D images of plasma emission using a technique that is compatible with the fusion nuclear environment. A prototype IRVB has been developed and installed on NSTX-U to view the lower divertor. The IRVB is a pinhole camera which images radiation from the plasma onto a 2.5 μm thick, 9 × 7 cm² Pt foil and monitors the resulting spatio-temporal temperature evolution using an IR camera. The power flux incident on the foil is calculated by solving the 2D+time heat diffusion equation, using the foil's calibrated thermal properties. An optimized, high frame rate IRVB, is quantitatively compared to results from a resistive bolometer on the bench using a modulated 405 nm laser beam with variable power density and square wave modulation from 0.2 Hz to 250 Hz. The design of the NSTX-U system and benchtop characterization are presented where signal-to-noise ratios are assessed using three different IR cameras: FLIR A655sc, FLIR A6751sc, and SBF-161. The sensitivity of the IRVB equipped with the SBF-161 camera is found to be high enough to measure radiation features in the NSTX-U lower divertor as estimated using SOLPS modeling. The optimized IRVB has a frame rate up to 50 Hz, high enough to distinguish radiation during edge-localized-modes (ELMs) from that between ELMs.

Preliminary design of a tangentially viewing imaging bolometer for NSTX-U

The infrared imaging video bolometer (IRVB) measures plasma radiated power images using a thin metal foil. Two different designs with a tangential view of NSTX-U are made assuming a 640 × 480 (1280 × 1024) pixel, 30 (105) fps, 50 (20) mK, IR camera imaging the 9 cm × 9 cm × 2 μm Pt foil. The foil is divided into 40 × 40 (64 × 64) IRVB channels. This gives a spatial resolution of 3.4 (2.2) cm on the machine mid-plane. The noise equivalent power density of the IRVB is given as 113 (46) μW/cm² for a time resolution of 33 (20) ms. Synthetic images derived from Scrape Off Layer Plasma Simulation data using the IRVB geometry show peak signal levels ranging from ∼0.8 to ∼80 (∼0.36 to ∼26) mW/cm².

Na(+) /Ca(2+) exchanger-heterozygote knockout mice display increased relaxation in gastric fundus and accelerated gastric transit in vivo

BACKGROUND

For the contraction and relaxation of gastric smooth muscles to occur, the intracellular Ca(2+) concentration must be increased and decreased, respectively. The Na(+) /Ca(2+) exchanger (NCX) is a plasma membrane transporter that is involved in regulating intracellular Ca(2+) concentrations.

METHODS

To determine the role of NCX in gastrointestinal tissues, we examined electric field stimulation (EFS)-induced relaxations in the circular muscles of the gastric fundus in NCX1 and NCX2 heterozygote knockout mice (HET).

KEY RESULTS

The myenteric plexus layers and the longitudinal and circular muscle layers in the gastric fundus of wild-type mice (WT) were strongly immunoreactive to NCX1 and NCX2. EFS induced a transient relaxation that was apparent during the stimulus and a sustained relaxation that persisted after the end of the stimulus. The amplitudes of EFS-induced transient relaxation and sustained relaxation were greater in NCX1 HET and NCX2 HET than in WT. When an inhibitor of nitric oxide synthase was added following the EFS, neither NCX1 HET nor NCX2 HET exhibited transient relaxation, similar to WT. Furthermore, when a PACAP antagonist was added following the EFS, sustained relaxation in NCX1 HET and NCX2 HET was not observed, similar to WT. Next, we examined the effect of NCX heterozygous deficiency on relaxation in response to NO and PACAP in smooth muscles. The magnitude of NOR-1- and PACAP-induced relaxations in NCX1 HET and NCX2 HET was similar to that of WT.

CONCLUSIONS & INFERENCES

In this study, we demonstrate that NCX1 and NCX2 expressed in neurons regulate the motility in the gastric fundus.

Effects of trehalose supplementation on the growth performance and intestinal innate immunity of juvenile chicks

Trehalose is composed of two molecules of D-glucose joined by an α,α-1,1 glucosidic linkage and has antioxidative and anti-inflammatory effects. The present study investigated the effect of feeding a trehalose-supplemented diet on the growth performance, as well as the oxidative status and the intestinal innate immunity of juvenile chicks. A total of 16 d-old male broiler chicks were used in this study: two groups of 8 birds were fed on a 0% (control) or 0.5% trehalose-supplemented diet for 18 d. The mean body weight of the trehalose group was significantly greater than that of the control group, but feed efficiency was not altered by feeding the trehalose-supplemented diet. No differences in the levels of lipid peroxidation in skeletal muscle, liver and plasma were observed between the control and trehalose-supplemented groups. The mRNA levels of interferon-γ, tumour necrosis factor-like ligand 1A, interleukin-10, NADPH oxidase 4 and inducible NO synthase were significantly reduced by the trehalose supplementation. Our results suggest that dietary supplementation with trehalose after hatching may have beneficial effects on the growth performance of juvenile chicks, probably by improving their intestinal innate immunity.

In situ calibration of an infrared imaging video bolometer in the Large Helical Device

The InfraRed imaging Video Bolometer (IRVB) is a powerful diagnostic to measure multi-dimensional radiation profiles in plasma fusion devices. In the Large Helical Device (LHD), four IRVBs have been installed with different fields of view to reconstruct three-dimensional profiles using a tomography technique. For the application of the measurement to plasma experiments using deuterium gas in LHD in the near future, the long-term effect of the neutron irradiation on the heat characteristics of an IRVB foil should be taken into account by regular in situ calibration measurements. Therefore, in this study, an in situ calibration system was designed.

Adrenal nodularity and somatic mutations in primary aldosteronism: one node is the culprit?

CONTEXT

Somatic mutations in genes that influence cell entry of calcium have been identified in aldosterone-producing adenomas (APAs) of adrenal cortex in primary aldosteronism (PA). Many adrenal glands removed for suspicion of APA do not contain a single adenoma but nodular hyperplasia.

OBJECTIVE

The objective of the study was to assess multinodularity and phenotypic and genotypic characteristics of adrenals removed because of the suspicion of APAs.

DESIGN AND METHODS

We assessed the adrenals of 53 PA patients for histopathological characteristics and immunohistochemistry for aldosterone (P450C18) and cortisol (P450C11) synthesis and for KCNJ5, ATP1A1, ATP2B3, and CACNA1D mutations in microdissected nodi.

RESULTS

Glands contained a solitary adenoma in 43% and nodular hyperplasia in 53% of cases. Most adrenal glands contained only one nodule positive for P450C18 expression, with all other nodules negative. KCNJ5 mutations were present in 22 of 53 adrenals (13 adenoma and nine multinodular adrenals). An ATP1A1 and a CACNA1D mutation were found in one multinodular gland each and an ATP2B3 mutation in five APA-containing glands. Mutations were always located in the P450C18-positive nodule. In one gland two nodules containing two different KCNJ5 mutations were present. Zona fasciculata-like cells were more typical for KCNJ5 mutation-containing nodules and zona glomerulosa-like cells for the other three genes.

CONCLUSIONS

Somatic mutations in KCNJ5, ATP1A1, or CACNA1D genes are not limited to APAs but are also found in the more frequent multinodular adrenals. In multinodular glands, only one nodule harbors a mutation. This suggests that the occurrence of a mutation and nodule formation are independent processes. The implications for clinical management remain to be determined.

Catechins inhibit vascular endothelial growth factor production and cyclooxygenase-2 expression in human dental pulp cells

AIM

To investigate the effect of catechins on vascular endothelial growth factor (VEGF) production and cyclooxygenase-2 (COX-2) expression in human dental pulp cells (HDPC) stimulated with bacteria-derived factors or pro-inflammatory cytokines.

METHODOLOGY

Morphologically fibroblastic cells established from explant cultures of healthy human dental pulp tissues were used as HDPC. HDPC pre-treated with catechins, epigallocatechin-3-gallate (EGCG) or epicatechin gallate (ECG), were exposed to lipopolysaccharide (LPS), peptidoglycan (PG), interlukin-1β (IL-1β) or tumour necrosis factor-α (TNF-α). VEGF production was examined by enzyme-linked immunosorbent assay, and COX-2 expression was assessed by immunoblot.

RESULTS

EGCG and ECG significantly reduced LPS- or PG-mediated VEGF production in the HDPC in a dose-dependent manner. EGCG also prevented IL-1β-mediated VEGF production. Although TNF-α did not enhance VEGF production in the dental pulp cells, treatment of 20 μg mL(-1) of EGCG decreased the level of VEGF. In addition, the catechins attenuated COX-2 expression induced by LPS and IL-1β.

CONCLUSIONS

The up-regulated VEGF and COX-2 expressions in the HDPC stimulated with these bacteria-derived factors or IL-1β were diminished by the treatment of EGCG and ECG. These findings suggest that the catechins may be beneficial as an anti-inflammatory tool of the treatment for pulpal inflammation.

Omega-3 supplementation alters mitochondrial membrane composition and respiration kinetics in human skeletal muscle

Studies have shown increased incorporation of omega-3 fatty acids into whole skeletal muscle following supplementation, although little has been done to investigate the potential impact on the fatty acid composition of mitochondrial membranes and the functional consequences on mitochondrial bioenergetics. Therefore, we supplemented young healthy male subjects (n = 18) with fish oils [2 g eicosapentaenoic acid (EPA) and 1 g docosahexanoic acid (DHA) per day] for 12 weeks and skeletal muscle biopsies were taken prior to (Pre) and following (Post) supplementation for the analysis of mitochondrial membrane phospholipid composition and various assessments of mitochondrial bioenergetics. Total EPA and DHA content in mitochondrial membranes increased (P < 0.05) ∼450 and ∼320%, respectively, and displaced some omega-6 species in several phospholipid populations. Mitochondrial respiration, determined in permeabilized muscle fibres, demonstrated no change in maximal substrate-supported respiration, or in the sensitivity (apparent Km) and maximal capacity for pyruvate-supported respiration. In contrast, mitochondrial responses during ADP titrations demonstrated an enhanced ADP sensitivity (decreased apparent Km) that was independent of the creatine kinase shuttle. As the content of ANT1, ANT2, and subunits of the electron transport chain were unaltered by supplementation, these data suggest that prolonged omega-3 intake improves ADP kinetics in human skeletal muscle mitochondria through alterations in membrane structure and/or post-translational modification of ATP synthase and ANT isoforms. Omega-3 supplementation also increased the capacity for mitochondrial reactive oxygen species emission without altering the content of oxidative products, suggesting the absence of oxidative damage. The current data strongly emphasize a role for omega-3s in reorganizing the composition of mitochondrial membranes while promoting improvements in ADP sensitivity.