Blood biomarkers for vibration-induced white fingers. A case-comparison study

BACKGROUND

Vibration induced white fingers (VWF) is one form of secondary Raynaud's phenomenon (RP).

METHODS

Vibration exposed workers with RP and vibration exposed controls without RP participated. Blood samples were collected before and after cold challenge exposure (COP). The concentration of von Willebrand factor (vonWf), thrombomodulin (TM), serotonin (SER), endothelin-1 (ET₁ ), calcitonin gene-related peptide, or thromboxane A₂ was calculated. The diagnostic usefulness of the substances for ruling in the diagnosis of Raynaud's was evaluated.

RESULTS

The cases showed a significant lower concentration of vonWf before and after COP, a significant increase of ET₁  and a decrease of TM after COP. The diagnostic usefulness of vonWf showed a likelihood of defining a true case by 35%.

CONCLUSIONS

vonWf, TM, SER, or ET₁ are suggested biomarkers for VWF. Diagnostic evaluation of vonWf showed a likelihood of defining a true case by 35% in the diagnosis of RP related to vibration.

Can sensation of cold hands predict Raynaud's phenomenon or paraesthesia?

Background

Raynaud’s phenomenon and neurosensory symptoms are common after hand-arm vibration exposure. Knowledge of early signs of vibration injuries is needed.

Aims

To investigate the risk of developing Raynaud’s phenomenon and paraesthesia in relation to sensation of cold hands in a cohort of male employees at an engineering plant.

Methods

We followed a cohort of male manual and office workers at an engineering plant in Sweden for 21 years. At baseline (1987 and 1992) and each follow-up (1992, 1997, 2002, 2008), we assessed sensation of cold, Raynaud’s phenomenon and paraesthesia in the hands using questionnaires and measured vibration exposure. We calculated risk estimates with univariate and multiple logistic regression analyses and adjusted for vibration exposure and tobacco usage.

Results

There were 241 study participants. During the study period, 21 individuals developed Raynaud’s phenomenon and 43 developed paraesthesia. When adjusting the risk of developing Raynaud’s phenomenon for vibration exposure and tobacco use, the odds ratios were between 6.0 and 6.3 (95% CI 2.2–17.0). We observed no increased risk for paraesthesia in relation to a sensation of cold hands.

Conclusions

A sensation of cold hands was a risk factor for Raynaud’s phenomenon. At the individual level, reporting a sensation of cold hands did not appear to be useful information to predict future development of Raynaud’s phenomenon given a weak to moderate predictive value. For paraesthesia, the sensation of cold was not a risk factor and there was no predictive value at the individual level.

Exposure to whole-body vibration and hospitalization due to lumbar disc herniation

Objective

The aim was to examine if exposure to whole-body vibration (WBV) increases the risk for hospitalization due to lumbar disc herniation.

Methods

The study basis is a cohort of 288,926 Swedish construction workers who participated in a national occupational health surveillance programme from 1971 until 1992. Job title, smoking habits, body weight, height and age were registered at the examinations. Assessment of WBV were made for each of the constituent occupations by constructing a job-exposure matrix (JEM). Exposure to WBV was graded on a scale from 0 to 5. In addition, the occurrence of hospitalization due to lumbar disc herniation from January 1st 1987 until December 31st 2010 was collected from a linkage with the Swedish Hospital Discharge Register. Poisson regressions were used to estimate relative risk with 95 percent confidence intervals (95% CI), adjusting for age, height, weight and smoking, using white-collar workers and foremen as a reference group.

Results

There was an increased risk for hospitalization due to lumbar disc herniation for workers in the construction industry exposed to medium to high WBV compared to white-collar workers and foremen 1.35 (1.12–1.63). When restricting the analyses to include workers 30–49 years of age at the time of the hospital admission the risk was 1.69 (95% CI 1.29–2.21).

Conclusion

This study further supports that occupational exposure to whole-body vibration increases the risk for hospitalization due to lumbar disc herniation.

Electronic supplementary material

The online version of this article (10.1007/s00420-018-1316-5) contains supplementary material, which is available to authorized users.

Hand-arm vibration and the risk of vascular and neurological diseases-A systematic review and meta-analysis

Background

Increased occurrence of Raynaud’s phenomenon, neurosensory injury and carpal tunnel syndrome has been reported for more than 100 years in association with work with vibrating machines. The current risk prediction modelling (ISO-5349) for “Raynaud’s phenomenon” is based on a few studies published 70 to 40 years ago. There are no corresponding risk prediction models for neurosensory injury or carpal tunnel syndrome, nor any systematic reviews comprising a statistical synthesis (meta-analysis) of the evidence.

Objectives

Our aim was to provide a systematic review of the literature on the association between Raynaud’s phenomenon, neurosensory injuries and carpal tunnel syndrome and hand-arm vibration (HAV) exposure. Moreover the aim was to estimate the magnitude of such an association using meta-analysis.

Methods

This systematic review covers the scientific literature up to January 2016. The databases used for the literature search were PubMed and Science Direct. We found a total of 4,335 abstracts, which were read and whose validity was assessed according to pre-established criteria. 294 articles were examined in their entirety to determine whether each article met the inclusion criteria. The possible risk of bias was assessed for each article. 52 articles finally met the pre-established criteria for inclusion in the systematic review.

Results

The results show that workers who are exposed to HAV have an increased risk of vascular and neurological diseases compared to non-vibration exposed groups. The crude estimate of the risk increase is approximately 4–5 fold. The estimated effect size (odds ratio) is 6.9 for the studies of Raynaud’s phenomenon when including only the studies judged to have a low risk of bias. The corresponding risk of neurosensory injury is 7.4 and the equivalent of carpal tunnel syndrome is 2.9.

Conclusion

At equal exposures, neurosensory injury occurs with a 3-time factor shorter latency than Raynaud’s phenomenon. Which is why preventive measures should address this vibration health hazard with greater attention.

Thermal perception thresholds among workers in a cold climate

Purpose

To investigate whether exposure to cold could influence the thermal perception thresholds in a working population.

Methods

This cross-sectional study was comprised of 251 males and females and was carried out at two mines in the northern part of Norway and Sweden. The testing included a baseline questionnaire, a clinical examination and measurements of thermal perception thresholds, on both hands, the index (Digit 2) and little (Digit 5) fingers, for heat and cold.

Results

The thermal perception thresholds were affected by age, gender and test site. The thresholds were impaired by experiences of frostbite in the fingers and the use of medication that potentially could affect neurosensory functions. No differences were found between the calculated normative values for these workers and those in other comparative investigations conducted in warmer climates.

Conclusions

The study provided no support for the hypothesis that living and working in cold climate will lead to impaired thermal perception thresholds. Exposure to cold that had caused localized damage in the form of frostbite was shown to lead to impaired thermal perception.

Musculoskeletal symptoms and exposure to whole-body vibration among open-pit mine workers in the Arctic

OBJECTIVES

This cross-sectional questionnaire study was carried out at 4 open-pit mines in Finland, Norway, Russia and Sweden as part of the MineHealth project. The aim has been to compare the prevalence of musculoskeletal symptoms between drivers of mining vehicles and non-drivers.

MATERIAL AND METHODS

The mine workers were asked whether they had suffered from any musculoskeletal symptoms during the previous 12 months in specified body regions, and to grade the severity of these symptoms during the past month. They were also asked about their daily driving of mining vehicles.

RESULTS

The questionnaire was completed by 1323 workers (757 vehicle drivers) and the reported prevalence and severity of symptoms were highest for the lower back, followed by pain in the neck, shoulder and upper back. Drivers in the Nordic mines reported fewer symptoms than non-drivers, while for Russian mine workers the results were the opposite of that. The daily driving of mining vehicles had no significant association with the risk of symptoms. Female drivers indicated a higher prevalence of symptoms as compared to male drivers.

CONCLUSIONS

The study provided only weak support for the hypothesis that drivers of vehicles reported a higher prevalence of musculoskeletal symptoms than non-vehicle drivers. There were marked differences in the prevalence of symptoms among workers in various enterprises, even though the nature of the job tasks was similar. Int J Occup Med Environ Health 2017;30(4):553-564.

Neurovascular hand symptoms in relation to cold exposure in northern Sweden: a population-based study

PURPOSE

To describe the self-reported ambient cold exposure in northern Sweden and to relate the level of cumulative cold exposure to the occurrence of sensory and vascular hand symptoms. We hypothesize that cold exposure is positively related to reporting such symptoms.

METHODS

A questionnaire about cold exposure and related symptoms was sent out to 35,144 subjects aged 18-70 years and living in northern Sweden.

RESULTS

A total of 12,627 out of 35,144 subjects returned the questionnaire (response rate 35.9%). Subjects living in the rural alpine areas reported more extensive cold exposure both during work and leisure time compared to the urbanized coastal regions. Frostbite in the hands was present in 11.4% of men and 7.1% of women, cold sensitivity was present in 9.7 and 14.4%, and Raynaud's phenomenon was present in 11.0% of men and 14.0% of women. There was a positive association between cumulative cold exposure and neurovascular hand symptoms.

CONCLUSION

The present study demonstrates that the cold environment in northern Sweden might be an underestimated health risk. Our hypothesis that cold exposure is positively related to reporting of neurovascular hand symptoms was supported by our findings. In addition, such symptoms were common not only in conjunction with an overt cold injury. Our results warrant further study on pathophysiological mechanisms and suggest the need for confirmatory prevalence studies to support national public health planning.

Is outdoor work associated with elevated rates of cerebrovascular disease mortality? A cohort study based on iron-ore mining

Background

A cohort study that examined iron ore mining found negative associations between cumulative working time employed underground and several outcomes, including mortality of cerebrovascular diseases. In this cohort study, and using the same group of miners, we examined whether work in an outdoor environment could explain elevated cerebrovascular disease rates.

Methods

This study was based on a Swedish iron ore mining cohort consisting of 13,000 workers. Poisson regression models were used to generate smoothed estimates of standardized mortality ratios and adjusted rate ratios, both models by cumulative exposure time in outdoor work.

Results

The adjusted rate ratio between employment classified as outdoor work ≥25 years and outdoor work 0–4 years was 1.62 (95 % CI 1.07–2.42). The subgroup underground work ≥15 years deviated most in occurrence of cerebrovascular disease mortality compared with the external reference population: SMR (0.70 (95 % CI 0.56–0.85)).

Conclusions

Employment in outdoor environments was associated with elevated rates of cerebrovascular disease mortality. In contrast, work in tempered underground employment was associated with a protecting effect.

Exposure to whole-body vibration in open-cast mines in the Barents region

Objectives

We aimed to measure and evaluate whole-body vibration (WBV) exposure among drivers of mining vehicles in the Barents region.

Study design

In the period from November 2012 to August 2014, this cross-sectional study was carried out at 3 mines in Finland, Norway and Sweden as part of the MineHealth project.

Methods

Measurements of WBV were conducted on the surface of the driver's seat during normal work in accordance with international standards. Personal data on daily exposure times were collected by a questionnaire.

Results

Measurements were conducted on 95 different mining vehicles both as root mean square (RMS) value and vibration dose value (VDV) representing different manufacturers, models and capacities. Of the 453 miners who answered the questionnaire, 232 indicated that they were exposed to WBV during their working day. The results show that the mean daily exposure time varies between 1.9 and 6.7 h for different vehicles. The calculated mean A(8) could be found in an interval between 0.2 and 1.0 m/s² and the corresponding 8-h VDV fell between 7 and 17 m/s^1.75.

Conclusions

Exposure to WBV among operators of mining vehicles may be a serious health and safety problem in the mines studied. The employers ought, therefore, take active steps to reduce exposure in accordance with the European vibration directive. Moreover, since some groups of drivers are exposed to vibration that is close to or exceeds the exposure limit values, the employer should take immediate action to reduce exposure below these values.

Neurosensory and vascular function after 14 months of military training comprising cold winter conditions

OBJECTIVE

This study aimed to examine the effects of 14 months of military training comprising cold winter conditions on neurosensory and vascular function in the hands and feet.

METHODS

Military conscripts (N=54) were assessed with quantitative sensory testing comprising touch, temperature, and vibration perception thresholds and finger systolic blood pressure (FSBP) after local cooling and a questionnaire on neurosensory and vascular symptoms at both baseline and follow-up. Ambient air temperature was recorded with body worn temperature loggers.

RESULTS

The subjects showed reduced sensitivity to perception of touch, warmth, cold and vibrations in both the hands and feet except from vibrotactile perception in digit two of the right hand (right dig 2). Cold sensations, white fingers, and pain/discomfort when exposed to cold as well as pain increased in both prevalence and severity. There were no statistically significant changes in FSBP after local cooling.

CONCLUSION

Fourteen months of winter military training comprising cold winter conditions reduced sensation from touch, warmth, cold, and vibrotactile stimulus in both hands and feet and increased the severity and prevalence of symptoms and pain. The vascular function in the hands, measured by FSBP after local cooling, was not affected.

Seated postural neck and trunk reactions to sideways perturbations with or without a cognitive task

Driving on irregular terrain will expose the driver to sideways mechanical shocks or perturbations that may cause musculoskeletal problems. How a cognitive task, imposed on the driver, affects seated postural reactions during perturbations is unknown. The aim of the present study was to investigate seated postural reactions in the neck and trunk among healthy adults exposed to sideways perturbations with or without a cognitive task. Twenty-three healthy male subjects aged 19-36 years, were seated on a chair mounted on a motion system and randomly exposed to 20 sideways perturbations (at two peak accelerations 5.1 or 13.2m/s(2)) in two conditions: counting backwards or not. Kinematics were recorded for upper body segments using inertial measurement units attached to the body and electromyography (EMG) was recorded for four muscles bilaterally in the neck and trunk. Angular displacements (head, neck, trunk and pelvis) in the frontal plane, and EMG amplitude (normalised to maximum voluntary contractions, MVC) were analysed. The cognitive task provoked significantly larger angular displacements of the head, neck and trunk and significantly increased EMG mean amplitudes in the upper neck during deceleration, although 10% of MVC was never exceeded. A cognitive task seems to affect musculoskeletal reactions when exposed to sideways perturbations in a seated position.

Risk of hearing loss among workers with vibration-induced white fingers

BACKGROUND

We examined the risk of hearing loss for workers who use hand-held vibrating tools with vibration-induced white fingers (VWF) compared to workers without VWF.

METHODS

Data on 184 participants from a 21-year cohort were gathered with questionnaires and measurements. The effects on hearing status of VWF, hand-arm vibration exposure, smoking habits, age and two-way interactions of these independent variables were examined with binary logistic regression. Analyses were made for the right hand and ear as well as for the hand with VWF and the ear with worse categorized hearing status.

RESULTS

Workers with VWF in their right hand had an increased risk of hearing loss (odds ratio 2.2-2.3) in the right ear. Workers with VWF in any hand did not have any increased risk of hearing loss in the ear with worse hearing status.

CONCLUSIONS

This study supports the hypothesis that VWF increases the risk of hearing loss among workers who use hand-held vibrating tools in a noisy environment.

Quantitatively measured tremor in hand-arm vibration-exposed workers

Objectives

The aim of the present study was to investigate the possible increase in hand tremor in relation to hand-arm vibration (HAV) exposure in a cohort of exposed and unexposed workers.

Methods

Participants were 178 male workers with or without exposure to HAV. The study is cross-sectional regarding the outcome of tremor and has a longitudinal design with respect to exposure. The dose of HAV exposure was collected via questionnaires and measurements at several follow-ups. The CATSYS Tremor Pen^® was used for measuring postural tremor. Multiple linear regression methods were used to analyze associations between different tremor variables and HAV exposure, along with predictor variables with biological relevance.

Results

There were no statistically significant associations between the different tremor variables and cumulative HAV or current exposure. Age was a statistically significant predictor of variation in tremor outcomes for three of the four tremor variables, whereas nicotine use was a statistically significant predictor of either left or right hand or both hands for all four tremor variables.

Conclusions

In the present study, there was no evidence of an exposure–response association between HAV exposure and measured postural tremor. Increase in age and nicotine use appeared to be the strongest predictors of tremor.

Neurosensory sequelae assessed by thermal and vibrotactile perception thresholds after local cold injury

Background

Local freezing cold injuries are common in the north and sequelae to cold injury can persist many years. Quantitative sensory testing (QST) can be used to assess neurosensory symptoms but has previously not been used on cold injury patients.

Objective

To evaluate neurosensory sequelae after local freezing cold injury by thermal and vibrotactile perception thresholds and by symptom descriptions.

Design

Fifteen patients with a local freezing cold injury in the hands or feet, acquired during military training, were studied with QST by assessment of vibrotactile (VPT), warmth (WPT) and cold (CPT) perception thresholds 4 months post-injury. In addition, a follow-up questionnaire, focusing on neurovascular symptoms, was completed 4 months and 4 years post-injury.

Results

QST demonstrated abnormal findings in one or both affected hands for VPT in 6 patients, for WPT in 4 patients and for CPT in 1 patient. In the feet, QST was abnormal for VPT in one or both affected feet in 8 patients, for WPT in 6 patients and for CPT in 4 patients. Freezing cold injury related symptoms, e.g. pain/discomfort when exposed to cold, cold sensation and white fingers were common at 4 months and persisted 4 years after the initial injury.

Conclusions

Neurosensory sequelae after local freezing cold injury, in terms of abnormal thermal and/or vibration perception thresholds, may last at least 4 months after the initial injury. Symptoms such as pain/discomfort at cold exposure, cold sensations and white fingers may persist at least 4 years after the initial injury.

A prospective cohort study investigating an exposure-response relationship among vibration-exposed male workers with numbness of the hands

OBJECTIVE

The aim of this study was to investigate the exposure-response relationship of hand-arm vibration exposure to neurological symptoms (numbness) of the hand in a cohort of vibration-exposed workers.

METHODS

The baseline cohort comprised 241 office and manual workers with and without exposure to hand-arm vibration. Numbness (the symptom or event) in the hand was assessed for all subjects at baseline and follow-ups after 5, 10, and 16 years. The workers were stratified into quartiles with no exposure in the first quartile and increasing intensity of exposure in quartiles 2-4 (groups 1-3). Data analysis was performed using survival analysis (time to event). Information on cumulative exposure and years of exposure to event was collected via questionnaires. Measurements were performed in accordance with the International Organization for Standardization (ISO) 5349-1.

RESULTS

The hazard ratio (HR) of risk of event (numbness) differed statistically significantly between the non-exposed group (group 0) and the two higher exposure groups (groups 2 and 3). There was also a significant ratio difference between the lowest exposure group (group 1) and the two higher groups. The ratio for group 1 was 1.77 [95% confidence interval (95% CI) 0.96-3.26] compared with 3.78 (95% CI 2.15-6.62) and 5.31 (95% CI 3.06-9.20) for groups 2 and 3, respectively.

CONCLUSION

The results suggest a dose-response relationship between vibration exposure and numbness of the hands. This underlines the importance of keeping vibration levels low to prevent neurological injury to the hands.

Determinants explaining the variability of hand-transmitted vibration emissions from two different work tasks: grinding and cutting using angle grinders

BACKGROUND

There are numerous factors including physical, biomechanical, and individual that influence exposure to hand-transmitted vibration (HTV) and cause variability in the exposure measurements. Knowledge of exposure variability and determinants of exposure could be used to improve working conditions. We performed a quasi-experimental study, where operators performed routine work tasks in order to obtain estimates of the variance components and to evaluate the effect of determinants, such as machine-wheel combinations and individual operator characteristics.

METHODS

Two pre-defined simulated work tasks were performed by 11 operators: removal of a weld puddle of mild steel and cutting of a square steel pipe. In both tasks, four angle grinders were used, two running on compressed air and two electrically driven. Two brands of both grinding and cutting wheels were used. Each operator performed both tasks twice in a random order with each grinder and wheel and the time to complete each task was recorded. Vibration emission values were collected and the wheel wear was measured as loss of weight. Operators' characteristics collected were as follows: age, body height and weight, length and volume of their hands, maximum hand grip force, and length of work experience with grinding machines (years). The tasks were also performed by one operator who used four machines of the same brand. Mixed and random effects models were used in the statistical evaluation.

RESULTS

The statistical evaluation was performed for grinding and cutting separately and we used a measure referring to the sum of the 1-s r.m.s. average frequency-weighted acceleration over time for completing the work task (a(sa)). Within each work task, there was a significant effect as a result of the determinants 'the machine used', 'wheel wear', and 'time taken to complete the task'. For cutting, 'the brand of wheel' used also had a significant effect. More than 90% of the inherent variability in the data was explained by the determinants. The two electrically powered machines had a mean a(sa) that was 2.6 times higher than the two air-driven machines. For cutting, the effect of the brand of wheel on a(sa) was ~0.1 times. The a(sa) increased both with increasing wheel wear and with time taken to complete the work task. However, there were also a number of interaction effects which, to a minor extent, modified the a(sa). Only a minor part (1%) of the total variability was attributed to the operator: for cutting, the volume of the hands, maximum grip force, and body weight were significant, while for grinding, it was the maximum grip force. There was no clear difference in a(sa) between the four copies of the same brand of each machine.

CONCLUSIONS

By including determinants that were attributed to the brand of both machine and wheel used as well as the time taken to complete the work task, we were able to explain >90% of the variability. The dominating determinant was the brand of the machine. Little variability was found between operators, indicating that the overall effect as due to the operator was small.

Noise and hand-arm vibration exposure in relation to the risk of hearing loss

The aim of this study was to examine the possible association of combined exposure of noise and hand-arm vibration (HAV) and the risk of noise-induced hearing loss. Workers in a heavy engineering industry were part of a dynamic cohort. Of these workers, 189 had HAV exposure, and their age and hearing status were recorded in the same year and were, therefore, included in the analysis. Data on HAV duration and acceleration was gathered through questionnaires, observations, and measurements. All available audiograms were categorized into normal and hearing loss. The first exposure variable included the lifetime HAV exposure. The lifetime HAV exposure was multiplied by the acceleration of HAV for the second and third exposure variable. Logistic regression using the Generalized Estimation Equations method was chosen to analyze the data to account for the repeated measurements. The analysis was performed with both continuous exposure variables and with exposure variables grouped into exposure quartiles with hearing loss as an outcome and age as a covariate. With continuous exposure variables, the odds ratio (OR) with a 95% confidence interval (CI) for hearing loss was equal to or greater than one for all exposure variables. When the exposure variables were grouped into quartiles, the OR with a 95% CI was greater than one at the third and fourth quartile. The results show that working with vibrating machines in an environment with noise exposure increases the risk of hearing loss, supporting an association between exposure to noise and HAV, and the noise-induced hearing loss.

Back and neck pain due to working in a cold environment: a cross-sectional study of male construction workers

OBJECTIVE

To study whether work in a cold environment increased the risk of musculoskeletal symptoms in the neck and low back among construction workers.

METHODS

This cross-sectional study is based on a cohort of male workers in the Swedish construction industry that participated in regular health examinations through a nationwide occupational health service. The analysis is based on workers examined from 1971 to 1974, who answered a questionnaire including questions about neck and back pain. The cohort consists of 134,754 male workers, including 16,496 office workers and foremen. The health examinations of the workers were conducted in provinces covering Sweden from the south to the north, and temperature data were collected for the provinces. In the analyses, the results were adjusted for age, BMI and use of nicotine.

RESULTS

The prevalence's of neck and low back pain were higher among manual construction workers than among foremen and office workers (24.3 vs. 8.6 % and 16.5 vs. 6.2 %, respectively); the corresponding adjusted ORs for low back and neck pain were 1.59 (95 % CI 1.52-1.66) and 1.39 (95 % CI 1.30-1.49), respectively. Workers in the northern and central provinces had higher ORs for low back and neck pain compared to workers in the southern province. The test for trends showed an increased risk of developing low back and neck pain with decreased outdoor temperature.

CONCLUSIONS

Outdoor work in a cold environment may increase the risk of low back and neck pain.

Variability in hand-arm vibration during grinding operations

BACKGROUND

Measurements of exposure to vibrations from hand-held tools are often conducted on a single occasion. However, repeated measurements may be crucial for estimating the actual dose with good precision. In addition, knowledge of determinants of exposure could be used to improve working conditions. The aim of this study was to assess hand-arm vibration (HAV) exposure during different grinding operations, in order to obtain estimates of the variance components and to evaluate the effect of work postures.

METHODS

Ten experienced operators used two compressed air-driven angle grinders of the same make in a simulated work task at a workplace. One part of the study consisted of using a grinder while assuming two different working postures: at a standard work bench (low) and on a wall with arms elevated and the work area adjusted to each operator's height (high). The workers repeated the task three times. In another part of the study, investigating the wheel wear, for each grinder, the operators used two new grinding wheels and with each wheel the operator performed two consecutive 1-min grinding tasks. Both grinding tasks were conducted on weld puddles of mild steel on a piece of mild steel. Measurements were taken according to ISO-standard 5349 [the equivalent hand-arm-weighted acceleration (m s(-2)) averaged over 1 min]. Mixed- and random-effects models were used to investigate the influence of the fixed variables and to estimate variance components.

RESULTS

The equivalent hand-arm-weighted acceleration assessed when the task was performed on the bench and at the wall was 3.2 and 3.3 m s(-2), respectively. In the mixed-effects model, work posture was not a significant variable. The variables 'operator' and 'grinder' together explained only 12% of the exposure variability and 'grinding wheel' explained 47%; the residual variability of 41% remained unexplained. When the effect of grinding wheel wear was investigated in the random-effects model, 37% of the variability was associated with the wheel while minimal variability was associated with the operator or the grinder and 37% was unexplained. The interaction effect of grinder and operator explained 18% of the variability. In the wheel wear test, the equivalent hand-arm-weighted accelerations for Grinder 1 during the first and second grinding minutes were 3.4 and 2.9 m s(-2), respectively, and for Grinder 2, they were 3.1 and 2.9 m s(-2), respectively. For Grinder 1, the equivalent hand-arm-weighted acceleration during the first grinding minute was significantly higher (P = 0.04) than during the second minute.

CONCLUSIONS

Work posture during grinding operations does not appear to affect the level of HAV. Grinding wheels explained much of the variability in this study, but almost 40% of the variance remained unexplained. The considerable variability in the equivalent hand-arm-weighted acceleration has an impact on the risk assessment at both the group and the individual level.

Accident rates and types among self-employed private forest owners

Half of all Swedish forests are owned by private individuals, and at least 215,000 people work in these privately owned forest holdings. However, only lethal accidents are systematically monitored among self-employed forest workers. Therefore, data from the registries of the Swedish Work Environment Authority, the Labor Insurance Organization and the regional University Hospital in Umeå were gathered to allow us to perform a more in-depth assessment of the rate and types of accidents that occurred among private forest owners. We found large differences between the registries in the type and number of accidents that were reported. We encountered difficulties in defining "self-employed forest worker" and also in determining whether the accidents that did occur happened during work or leisure time. Consequently, the estimates for the accident rate that we obtained varied from 32 to > or = 4300 injured persons per year in Sweden, depending on the registry that was consulted, the definition of the sample population that was used, and the accident severity definition that was employed. Nevertheless, the different registries gave a consistent picture of the types of accidents that occur while individuals are participating in self-employed forestry work. Severe accidents were relatively common, as self-employed forestry work fatalities constituted 7% of the total number of fatalities in the work authority registry. Falling trees were associated with many of these fatal accidents as well as with accidents that resulted in severe non-fatal injuries. Thus, unsafe work methods appeared more related to the occurrence of an accident than the equipment that was being used at the time of the accident (e.g., a chainsaw). Improvement of the workers' skills should therefore be considered to be an important prevention measure that should be undertaken in this field. The challenges in improving the safety in these smallest of companies, which fall somewhere between the purview of occupational and consumer safety, are exemplified and discussed.

Nerve conduction in relation to vibration exposure - a non-positive cohort study

BACKGROUND

Peripheral neuropathy is one of the principal clinical disorders in workers with hand-arm vibration syndrome. Electrophysiological studies aimed at defining the nature of the injury have provided conflicting results. One reason for this lack of consistency might be the sparsity of published longitudinal etiological studies with both good assessment of exposure and a well-defined measure of disease. Against this background we measured conduction velocities in the hand after having assessed vibration exposure over 21 years in a cohort of manual workers.

METHODS

The study group consisted of 155 male office and manual workers at an engineering plant that manufactured pulp and paper machinery. The study has a longitudinal design regarding exposure assessment and a cross-sectional design regarding the outcome of nerve conduction. Hand-arm vibration dose was calculated as the product of self-reported occupational exposure, collected by questionnaire and interviews, and the measured or estimated hand-arm vibration exposure in 1987, 1992, 1997, 2002, and 2008. Distal motor latencies in median and ulnar nerves and sensory nerve conduction over the carpal tunnel and the finger-palm segments in the median nerve were measured in 2008. Before the nerve conduction measurement, the subjects were systemically warmed by a bicycle ergometer test.

RESULTS

There were no differences in distal latencies between subjects exposed to hand-arm vibration and unexposed subjects, neither in the sensory conduction latencies of the median nerve, nor in the motor conduction latencies of the median and ulnar nerves. Seven subjects (9%) in the exposed group and three subjects (12%) in the unexposed group had both pathological sensory nerve conduction at the wrist and symptoms suggestive of carpal tunnel syndrome.

CONCLUSION

Nerve conduction measurements of peripheral hand nerves revealed no exposure-response association between hand-arm vibration exposure and distal neuropathy of the large myelinated fibers in a cohort of male office and manual workers.

Mortality from myocardial infarction in relation to exposure to vibration and dust among a cohort of iron-ore miners in Sweden

OBJECTIVES

The aim of this study was to investigate myocardial infarction (MI) mortality in relation to exposure to hand/arm vibration (HAV) and whole body vibration (WBV) as well as exposure to dust among men employed in two Swedish iron-ore mines.

METHODS

This study comprised employed men at two iron-ore mines in Sweden who had been employed for at least 1 year from 1923 up to 1996. The causes of death were obtained from the national cause of death register from 1952 to 2001. Myocardial infarction mortality was obtained by linking personal identification numbers to the national cause of death register. Poisson regression was used for risk estimations on exposure-response relation, and analyses were made on the two age groups < or =60 years and >60 years.

RESULTS

Relative risks for MI mortality in relation to exposure were significantly increased for exposure (0/>0) to WBV (RR 1.18, 95% CI 1.06 to 1.31) and dust (RR 1.15, 95% CI 1.02 to 1.31), and the results indicated an exposure-response relation for WBV and dust separately. For 60 years and younger, exposure to HAV (0/>0) (RR 1.34, 95% CI 1.03 to 1.74) and WBV (0/>0) (RR 1.39, 95% CI 1.13 to 1.72) increased the risk of MI mortality. An exposure-response was found for HAV and WBV, as the medium and high exposed categories showed significantly increased risk estimates. None of the exposures significantly increased the risk in the group above 60 years. The increased risk estimates for exposure to WBV remained when adjusting for exposure to dust.

CONCLUSIONS

The results for the working age (< or =60 years) group showed significantly increased MI mortality for univariate exposure to HAV, WBV and dust. We found an association between increased mortality from MI and occupational exposure to WBV, and the risk remained after adjustment for dust exposure.

Neck pain combined with arm pain among professional drivers of forest machines and the association with whole-body vibration exposure

The purpose of this study was to investigate the existence of neck pain and arm pain among professional forest machine drivers and to find out if pain were related to their whole-body vibration (WBV) exposure. A self-administered questionnaire was sent to 529 forest machine drivers in northern Sweden and the response was 63%. Two pain groups were formed; 1) neck pain; 2) neck pain combined with arm pain. From WBV exposure data (recent measurements made according to ISO 2631-1, available information from reports) and from the self-administered questionnaire, 14 various WBV exposure/dose measures were calculated for each driver. The prevalence of neck pain reported both for the previous 12 months and for the previous 7 d was 34% and more than half of them reported neck pain combined with pain in one or both arms. Analysis showed no significant association between neck pain and high WBV exposure; however, cases with neck pain more often experienced shocks and jolts in the vehicle as uncomfortable. There was no significant association between the 14 WBV measures and type of neck pain (neck pain vs. neck pain combined with arm pain). It seems as if characteristics of WBV exposure can explain neither existence nor the type of neck pain amongst professional drivers of forest machines. The logging industry is important for several industrialised countries. Drivers of forest machines frequently report neuromusculoskeletal pain from the neck. The type of neck pain is important for the decision of treatment modality and may be associated with exposure characteristics at work.

Influence of vibration exposure on tactile and thermal perception thresholds

AIMS

To establish if intermittent exposure to hand-transmitted vibration had the same effect as continuous exposure on the temporary response of finger tactile and thermal perception thresholds.

METHODS

Two laboratory experiments were conducted. In each, 10 healthy subjects, five males and five females, participated. The subjects' fingers were exposed to vibration under four conditions with a combination of different periods of exposure and rest periods. The vibration frequency was 125 Hz and the frequency-weighted acceleration was 5 m/s(2). A measure of the tactile or thermal perception was conducted before the different exposures to vibration. Immediately after the vibration exposure, the acute effect was measured continuously for the first 75 s. This was followed by regular measures for a maximum of 30 min.

RESULTS

The results showed that combinations of vibration with different periods of exposure and rest periods significantly influenced vibrotactile perception, but not thermal perception.

CONCLUSIONS

These findings suggest that intermittent exposure to hand-transmitted vibration might be more beneficial for the response of the finger vibrotactile sensation than continuous exposure. This finding is inconsistent with the evaluation methods in ISO 5349-1 for vibrotactile sensation, but accurate for thermal perception.

Fifty-year follow-up of mortality among a cohort of iron-ore miners in Sweden, with specific reference to myocardial infarction mortality

OBJECTIVES

This study investigates both general mortality and mortality from myocardial infarction among men employed in iron-ore mines in Sweden.

METHODS

The mortality of employees (surface and underground workers) at the iron-ore mines in Malmberget and Kiruna, Sweden was investigated. The study cohort comprised men who had been employed for at least 1 year between 1923 and 1996. The causes of death were obtained from the national cause of death register from 1952 to 2001. Indirect standardised mortality ratios (SMR) were calculated for four main causes. Mortality specifically from myocardial infarction was also analysed.

RESULTS

4504 deaths in the cohort gave an SMR for total mortality of 1.05 (95% CI 1.02 to 1.09). Mortality was significantly higher for lung cancer (SMR 1.73, 95% CI 1.52 to 1.97). There was an increased risk of injuries and poisonings (SMR 1.34, 95% CI 1.24 to 1.46) and respiratory diseases (SMR 1.14, 95% CI 1.00 to 1.28). There were 1477 cases of myocardial infarction, resulting in an SMR of 1.12 (95% CI 1.07 to 1.18). SMR was higher (1.35, 95% CI 1.22 to 1.50) for men aged <or=60 years than for those >60 years of age (1.06, 95% CI 1.00 to 1.13).

CONCLUSIONS

Mortality from myocardial infarction was higher than expected. There was also an increased risk of death from injuries and poisonings, lung cancer and respiratory diseases, as well as higher general mortality. Our findings support the results of previous studies that there is an association between working in the mining industry and adverse health outcomes.

Incidence of Raynaud's phenomenon in relation to hand-arm vibration exposure among male workers at an engineering plant a cohort study

BACKGROUND

The objective of this study was to assess the incidence of Raynaud's phenomenon in relation to hand-arm vibration exposure in a cohort consisting of male office and manual workers.

METHODS

The baseline population consisted of 94 office and 147 manual workers at an engineering plant. Raynaud's phenomenon (RP) was assessed at baseline and at follow up (at 5, 10 and 15 years). A retrospective and a prospective cohort analysis of data were done. Hand-arm vibration exposure dose was defined as the product of exposure duration and the weighted hand-arm vibration exposure value according to ISO 5349-1.

RESULTS

The retrospective/prospective incidence of Raynaud's phenomenon was 16/14 per 1000 exposure years among exposed and 2.4/5.0 per 1000 years among the not exposed. The retrospective dose response curve based on 4 dose classes showed that class 2, 3 and 4 had similar response and showed higher incidence than the not-exposed. The dose with RP response to hand-arm vibration corresponded to a 10 year A(8) value between 0.4-1.0 m/s2.

CONCLUSION

The results indicate that the EU directive on an action value for hand-arm vibration of 2.5 m/s2 is not too low. Rather, it suggests that employers should take on actions even at exposure values of 1 m/s2A(8).

Changes in EMG activity in the upper trapezius muscle due to local vibration exposure

Exposure to vibration is suggested as a risk factor for developing neck and shoulder disorders in working life. Mechanical vibration applied to a muscle belly or a tendon can elicit a reflex muscle contraction, also called tonic vibration reflex, but the mechanisms behind how vibration could cause musculoskeletal disorders has not yet been described. One suggestion has been that the vibration causes muscular fatigue. This study investigates whether vibration exposure changes the development of muscular fatigue in the trapezius muscle. Thirty-seven volunteers (men and women) performed a sub-maximal isometric shoulder elevation for 3 min. This was repeated four times, two times with induced vibration and two times without. Muscle activity was measured before and after each 3-min period to look at changes in the electromyography parameters. The result showed a significantly smaller mean frequency decrease when performing the shoulder elevation with vibration (-2.51 Hz) compared to without vibration (-4.04 Hz). There was also a slightly higher increase in the root mean square when exposed to vibration (5.7% of maximal voluntary contraction) compared to without (3.8% of maximal voluntary contraction); however, this was not statistically significant. The results of the present study indicate that short-time exposure to vibration has no negative acute effects on the fatiguing of upper trapezius muscle.

Grading of sensorineural disturbances according to a modified Stockholm workshop scale using self-reports and QST

OBJECTIVE

The objective of the study was to apply, on a group of vibration exposed individuals, a proposed modification of the Stockholm Workshop scale for grading of sensorineural disorders by using self-reports and data from objective testing and to compare grading obtained through the two approaches.

METHODS

The study group consisted of 126 young persons with different individual levels of hand-transmitted vibration exposures. Effect measurements included a self-administered questionnaire and vibrotactile perception measurements and Purdue Pegboard testing. For grading using self reports three specific questions, believed to be good markers for complaints of intermittent numbness, sensory deficiency, and reduced performance in fine motor tasks, was picked out from the questionnaire. Results from vibrotactile perception and Purdue Pegboard testing were used for grading based on quantitative sensory testing. The sensorineural grading obtained by the two methods was then compared.

RESULTS

The outcome showed that about 60% of all individuals within the study group are graded equally by the two methods for grading. The frequency of individuals graded at advanced SN stages were however higher when using QST, predominantly due to more positive cases for the Purdue pegboard test compared with the corresponding outcome from the self reports.

CONCLUSION

The proposed modification of the grading scale reduces the in-built progressiveness and allows different combinations of sensorineural symptoms. The two grading methods seem to be somewhat correlated, something which may be considered as encouraging and promising for those who prefer to use, or must use one of the methods for grading. The proposed model for grading using self-reports should, however, be considered more as a conceptual idea for how this may be done. The models should be applied on a larger, more vibration exposed and more symptomatic study group, compared with the present study group, before any far-reaching conclusions can be drawn.

Acute effects on heart rate variability when exposed to hand transmitted vibration and noise

OBJECTIVES

This study investigates possible acute effects on heart rate variability (HRV) when people are exposed to hand transmitted vibration and noise individually and simultaneously.

METHODS

Ten male and 10 female subjects were recruited by advertisement. Subjects completed a questionnaire concerning their work environment, general health, medication, hearing, and physical activity level. The test started with the subject resting for 15 min while sitting down. After resting, they were exposed to one of four exposure conditions: (1) only vibration; (2) only noise; (3) both noise and vibration; or (4) a control condition of exposure to the static load only. All four exposures lasted 15 min and the resting time between the exposures was 30 min. A continuous electrocardiogram (ECG) signal was recorded and the following HRV parameters were calculated: total spectral power (P(TOT)); the spectral power of the very low frequency component (P(VLF)); the low frequency component (P(LF)); the high frequency component (P(HF)); and the ratio LF/HF.

RESULTS

Exposure to only vibration resulted in a lower P(TOT) compared to static load, whereas exposure to only noise resulted in a higher P(TOT). The mean values of P(TOT), P(VLF), P(LF), and P(HF) were lowest during exposure to vibration and simultaneous exposure to vibration and noise.

CONCLUSIONS

Exposure to vibration and/or noise acutely affects HRV compared to standing without these exposures. Being exposed to vibration only and being exposed to noise only seem to generate opposite effects. Compared to no exposure, P(TOT) was reduced during vibration exposure and increased during noise exposure.

Relationship between hand-arm vibration exposure and onset time for symptoms in a heavy engineering production workshop

OBJECTIVES

This study examined onset time for reported vascular and neurological symptoms in relation to the vibration load in a group of workers exposed to vibration.

METHODS

Information on the self-stated year for the first occurrence of symptoms was collected by means of questionnaires. During interviews data were obtained on self-stated estimations of daily exposure time, type of tool, and number of months or years with different exposures. The estimations of the vibration magnitudes of exposure were based on conducted measurements. From these data, the individual vibration exposure at the time of onset of symptoms was calculated.

RESULTS

The incidence was 25.6 and 32.9 per 1000 exposure years for vascular and neurological symptoms, respectively, in the group of workers. The first onset of symptoms appeared after an average of 12 years of exposure. For the workers, the symptoms of vascular or neurological disorders started after about the same number of exposure years. The calculated accumulated acceleration correlated best with the onset time of symptoms.

CONCLUSIONS

It was concluded that, since the workers' exposure to vibration was below the action level established in the European vibration directive, the results suggest that the action level is not a safe level for avoiding vascular and neurological symptoms.

Hand-arm vibration syndrome (HAVS) and musculoskeletal symptoms in the neck and the upper limbs in professional drivers of terrain vehicles--a cross sectional study

This study compares the prevalence of symptoms of Hand-arm vibration syndrome (HAVS) and musculoskeletal symptoms in the neck and the upper limbs, between professional drivers of terrain vehicles and a referent group. 769 male professional drivers of forest machines, snowmobiles, snowgroomers and reindeer herders and 296 randomly selected male referents completed a questionnaire about symptoms of HAVS and musculoskeletal symptoms in the neck and the upper limbs. They also gave information about their lifetime exposure duration driving terrain vehicles and their nicotine use. Prevalence odds ratios (POR) were determined and adjusted for age and nicotine use. Results show that there is a relation between exposure to driving terrain vehicles and some of the symptoms of HAVS (POR: 1.2-6.1). Increased odds of musculoskeletal symptoms in neck, shoulders and wrists were also found (POR 1.2-6.4), and it seemed to be related to the cumulative exposure time.

Vibration exposure and myocardial infarction incidence: the VHEEP case–control study

OBJECTIVES

The main objectives of this study were to assess the risk of contracting first episode of myocardial infarction (MI) subsequent to vibration exposure and to assess a possible exposure-response relationship.

METHODS

The Västernorrland heart epidemiology programme (VHEEP, a part of the Stockholm heart epidemiology programme study) was the source of the data. VHEEP is a population-based case-control study of risk factors for acute MI. Exposure information was collected by questionnaire and vibration exposure was assessed in 218 cases and 257 controls. Relative risks were estimated using odds ratios (ORs) from binary logistic regression.

RESULTS

The results show that the OR of acute MI when exposed to vibration was 1.6 (95% CI: 1.1-2.4). It was not possible, however, to determine whether an exposure-response relationship was present.

CONCLUSIONS

Working entailing vibrating machines is associated with an increased risk for acute MI.

The effect of fluid consumption on the forest workers' performance strategy

The heart rate development and time consumption of four Zimbabwean forest workers engaged in manual harvesting were studied to assess their performance strategy and whether this strategy was affected by differences in fluid consumption. Each worker was studied during 8 consecutive working days and produced 2.4 m3 pulpwood/day. They consumed either 0.17 l or 0.6 l of water each 1/2 hour with one fluid scheme assigned to each day according to a randomised block (person) design with four replicates (days). All workers were found to harvest large trees at the start of the working day and small trees at the end. All workers took longer to complete their task when on the low fluid scheme, however, the effect on the heart rate development varied for the individual workers as the strategies adopted to accommodate the stress inflicted by the low fluid scheme, varied for the individual workers. It is recommended that sufficient fluid supply during work be accompanied by training of the workers to convey the need and benefits of sufficient fluid consumption.

Sound levels in classrooms and effects on self-reported mood among school children

The principle of this field study is an investigation of recorded sound levels in 24 classrooms and relations between sound level measures and aspects of children's rated annoyance, task orientation, and inattentiveness. The background sound-exposure levels were distributed within the interval of 33-42 dB(A)eq and the activity sound level exposure ranged between 47-68 dB(A)eq. The recorded levels must be considered as high for work environments where steady concentration and undisturbed communication is essential. Results do not support the hypothesis that lower background-sound level and fewer students per class would improve the sound environment by generating a lower activity noise or the hypothesis that higher sound levels should increase annoyance and inattentiveness as well as deteriorate task orientation ratings.

Power absorption in women and men exposed to hand-arm vibration

OBJECTIVES

The aim of the study was to determine whether there are gender differences as regards the quantity of absorbed power, i.e., vibration absorption per unit of time, during exposure to vibration from a specially constructed handle.

METHODS

The study was conducted on 24 subjects (12 female and 12 male). The experiments were performed with exposure in two vibration directions, X(h), and Z(h), and with two vibration levels, 3 and 6 m/s(2).

RESULTS

The male subjects had significantly higher power absorption during exposure to vibrations in the Z(h) direction at the vibration level of 6 m/s(2) than did the female subjects. When adjusted for anthropometrical measurements the difference did not remain significant. Higher vibration levels resulted in significantly higher absorption of power for both X(h) and Z(h) directions. The absorption was significantly higher in the Z(h) direction than in the X(h) direction.

CONCLUSIONS

No gender difference in power absorption was shown.

A descriptive study of women injured by hand-arm vibration

The aim of this study was to describe the symptoms and the prognosis of vibration injuries in women. The investigation was based on a study of 374 women who had reported an injury due to hand-arm vibration to the Social Insurance Office or had received financial compensation from the Swedish Labor Market Insurance scheme during 1988-1997. Information on, for example, self-rated health symptoms and vibration exposure was collected by means of a questionnaire. On average, the first symptoms started after 7 yr of exposure and the first visit to a doctor took place after 11 yr. Neurological symptoms developed after a shorter period of exposure compared to vascular symptoms, 6.8 and 9.2 yr, respectively. The prevalence of numbness at the time of reporting the injury was 91% and the prevalence of white fingers was reported by 54%. The occupational group with the highest prevalence of vibration injuries was dental technicians. Two thirds of the women had stopped using vibrating machines in their work. Among the women who suffered from white fingers when they reported the injury, 50% declared impairment or no improvement of the symptoms. One woman in five was retired and the same number of women had retrained due to the occupational injury.

Relationship between vibration dose and the absorption of mechanical power in the hand

OBJECTIVES

The aim of this study was to examine the relationship between calculated vibration dose and the measured absorption of vibration power in the human hand, as well as the measured grip and feed forces applied by the subjects.

METHODS

The study was carried out with 10 healthy subjects. A special handle was used during the measurements. The influence of 4 different vibration levels with different durations during a test period of 5 minutes was investigated. The number of exposure intervals varied between 1 and 5. The same overall equivalent acceleration was used in all the experiments.

RESULTS

There is a significant difference between the calculated vibration dose and the amount of measured absorption of power. A higher acceleration level leads to significantly higher absorption. Furthermore, the outcome shows that rest periods contribute to a lower absorption of power in the hand and also lower feed forces. Conclusions This study supports the hypothesis that vibration-free rest periods give the human organism an opportunity to recover.

Exposure-response relationship between hand-arm vibration and vibrotactile perception sensitivity

BACKGROUND

The objectives of the study were to examine whether occupational use of vibrating hand-held tools was associated with an impaired vibrotactile perception, whether any exposure-response relationship exists, and whether the different populations of mechano-receptive afferent units are equally affected.

METHODS

Vibrotactile perception thresholds have been measured at seven frequencies (8-500 Hz) and evaluated among 125 vibration-exposed and 45 non-exposed male employees in a heavy engineering production workshop. Vibration exposure measurements were assessed on tools in accordance with ISO 5349. Vibrotactile perception thresholds have been individually graded in stages and placed in relation to individual vibration exposure.

RESULTS

The outcome did not reveal a clear relationship between vibration exposure and reduced vibrotactile sensitivity on an individual basis. There was a clear tendency on a group basis towards elevated thresholds when the study population was divided into three exposure categories. A fourfold increase in relative risk of reduced vibrotactile sensitivity for test frequencies above 40 Hz was observed between the highest exposure category compared to the non-exposed.

CONCLUSIONS

It was concluded that reduced tactile sensitivity is related to the degree of vibration exposure but it is not at present possible to delineate an exposure-response relationship.

Transmission of vibration energy to different parts of the human hand-arm system

The aim of this study was to investigate the transmission of vibration energy to three selected points along the hand and arm (knuckle, wrist and elbow) and to compare the energy transmission for two different kinds of vibration exposures, i.e. random and sinusoidal. The transmission of vibration energy was estimated for ten subjects during exposure to random (within the frequency range 20-5000 Hz) and sinusoidal vibration at eight different frequencies (20, 40, 80, 160, 320, 630, 1250 and 1600 Hz). The random and sinusoidal vibrations had a frequency-weighted acceleration level of 3 m/s2. The energy transmission was determined by simultaneous vibration measurements at the vibrating handle and in the hand-arm system. The measurements were made with a laser-velocity transducer and specially constructed equipment. The grip and feed forces were held constant at 40 N. The results show that the energy transmission decreases with the distance from the source. The results also show that the energy transmission is dependent on the frequency for the random vibration exposures. No clear frequency dependence of the energy transmission could be found for the sinusoidal vibrations. It may also be concluded that there are differences in the energy transmission due to types of exposure, sinusoidal vibration showing higher transmission of energy to the hand-arm system than random vibration, especially at higher frequencies.

The influence of biodynamic factors on the mechanical impedance of the hand and arm

The purpose of this study was to investigate the mechanical impedance of the human hand-arm system during exposure to random vibration under various experimental conditions and to evaluate statistically whether these experimental conditions have any influence on magnitude and phase of the mechanical impedance. A further aim was to compare the obtained results with other investigations where sinusoidal excitation has been used. The mechanical impedance was estimated in ten healthy subjects during exposure to random vibration, with a constant velocity spectrum within the frequency range 4-2000 Hz, by use of a specially designed laboratory handle. In the study, the influence of various conditions, such as vibration direction (Xh, Yh, Zh), grip force (25-75 N), feed force (20-60 N), frequency-weighted acceleration level (3, 6, 9, 12 m/s2) and hand and arm posture (five flexions, two abductions) were studied. The outcome showed that the vibration direction and the frequency of the vibration stimuli have a strong significant influence on the impedance of the hand. An increased vibration level resulted in a significantly lower impedance for frequencies over 100 Hz. Increase grip and feed forced led on the other hand to an increased impedance for all frequencies. With regard to hand and arm posture, the results show that the flexion and abduction had a significant contribution for frequencies below 30 Hz. Furthermore, the influence of some of the studied variables had a non-linear effect on the impedance but also differed between different exposure directions. It was concluded, moreover, that the vibration response characteristics of the hand and arm differ, depending whether the signal is a discrete frequency signal or a signal consisting of several frequencies.

Comparison of different methods for vibration measurements on hand-held vibrating tools

Vibration measurements have been done on hand-held tools in a group of 48 platers by evaluating the individual vibration acceleration and absorption of vibration energy. The measurement of acceleration has been done frequency-weighted and frequency-unweighted in accordance with ISO 5349 and NIOSH (USA) recommendations for hand-arm vibration standards, respectively. The acceleration and the energy absorption have been measured simultaneously in the three orthogonal directions, the latter by using a specially designed adapter. The exposure time has been determined by both subjective rating and objective measurements. Individual energy-equivalent accelerations and vibration dosages have been calculated from these data. The outcome shows that the type of tool was critical to vibration load when the different measures for determining vibration levels were used. Of the methods used, the evaluation specified by ISO 5349 makes most consideration of low frequencies of vibration (< 50 Hz), absorption of vibration energy middle frequencies (50-200 Hz) and NIOSH of high frequencies (> 200 Hz). The results show a poor correlation between the three methods used. Close agreement between mean subjective rating and objective measurement of the average exposure time was found. Further studies of the relation between results presented here and generated disturbance will be conducted, which may clarify any exposure-response relationship.

The influence of individual factors on the absorption of vibration energy in the hand and arm

The detrimental effects of vibrating hand-held tools upon humans have been known for a long time, and determination of the absorption of vibration energy into the operator's hand and arm could be an alternative method of risk assessment. The energy absorption in the hand and arm during exposure to random vibration has been measured in 84 subjects, 40 males and 44 females. A special handle was used during the measurements. The influence of various experimental conditions, such as vibration level (3-12m/s2), vibration direction (Xh, Yh, Zh), and grip force (25-75 N) were studied. Furthermore, the influence on the absorption of different individual biological factors, such as age, weight, height, hand and arm dimensions as well as blood pressure were also investigated. The subject also provided demographic data through a questionnaire covering work, symptoms of finger blanching and numbness as well as current use of nicotine (snuff of tobacco). The results show that energy absorption is influenced by exposure directions and levels as well as grip forces. Furthermore, the results show that individual biological differences between subjects, for instance age, hand volume and hand thickness, have a significant influence on the amount of absorbed energy. Blood pressure had no influence on the absorption. The same was also found for the subjective reported symptoms of finger blanching or numbness as well as for use of nicotine.

Assessment of heat pain perception in relation to vibration exposure

The effect of vibration on thin unmyelinated sensory fibers was studied by perception threshold measurement of heat pain. The investigation was a cross-sectional study of 98 vibration-exposed and 53 non-vibration-exposed workers. Pain perception was determined by using the "Marstock" method. The perception threshold of contact heat induced pain was assessed by the method of limits. Quantified personal energy-equivalent vibration exposure was assessed for all subjects on a group basis. The cumulated lifetime equivalent frequency-weighted vibration exposure was estimated based on measurements according to ISO 5349. The mean heat perception threshold was 46.2 degrees C (SD 2.6 degrees C) for the right hand and 46.0 degrees C (SD 2.7 degrees C) for the left. The results showed no mean difference (left = 0.1 degree C, right = 0.6 degree C) in heat pain perception between vibration-exposed and non-exposed subjects. There was a high correlation between the right and left hand measurements (r = 0.81). The risk (rate ratio) for impairment was 1.02 (95% CI 0.81-1.30) for the right hand and 1.00 (95% CI 0.79-1.26) for the left. The results of the study did not indicate any impairment as assessed by an increased perception threshold for heat pain. The lack of an increased heat pain threshold among the vibration-exposed workers in our study cannot exclude a possible lesional somatosensory influence from the exposure, as the lesional effect may also be a lowering of the threshold. The multiple and unrelated percepts of thermal sensations imply that it is not legitimate to draw conclusions about the total status of the small calibre afferents when testing only the heat pain perception.

Vibrotactile perception sensitivity and its relation to hand-arm vibration exposure

Vibrotactile perception thresholds (VPT) at seven test frequencies (8-500 Hz) have been measured and evaluated among 170 male employees at a heavy engineering production workshop, 125 of them were at present, or in the past, exposed to hand-arm vibration. All participants were examined by a physician and none had symptoms of diseases or were exposed to other factors known to cause sensory neuropathies. VPTs [for the three lowest (8-32 Hz; non-Pacinian), for the four highest (63-500 Hz; Pacinian) and for all test frequencies together] and a sensitivity index (SI) has been individually graded in four (normal, slightly deteriorated, deteriorated and seriously deteriorated) and two (normal, abnormal) stages, respectively, and put in relation to individual exposure of vibration. The results do not show any clear relationship on an individual basis between vibration exposure and degraded vibrotactile perception. On a group basis, however, there is a clear tendency towards detoriorated VPTs when the study group is divided in exposure categories. The detorioration is most pronounced in the frequency range mediated by Pacinian corpuscles. In this range an approximately four-fold increase of relative risk for elevated VPT for those in the highest exposure category was observed compared to the non-exposed group. Corresponding relative risk estimate for SI is about 6. Therefore, the results suggest an existence of an exposure-response relationship.