Nanoparticle Concentration in Surgical Plume During Tonsillectomy: A Comparison of Four Techniques

OBJECTIVE

Surgical plume has known potential occupational health hazards. This study compares nanoparticle concentrations in surgical plumes generated between different pediatric tonsillectomy surgical techniques and assesses the efficacy of mitigation measures.

METHODS

This is a cross-sectional study performed at a tertiary care academic center. Extracapsular or intracapsular tonsillectomy was performed in 60 patients using four techniques and in 10 additional patients using mitigation measures. Two nanoparticle counters were used to measure particulate concentrations: CPC™ and DiSCmini™. Tonsillectomy techniques included: (1) microdebrider (MD), (2) Bovie with manual suctioning by an assistant (B), (3) Bovie with built-in smoke evacuation system (BS), and (4) Coblator™ (CB). An additional Yankauer suction was used in the mitigation groups (BSY) and (CBY). Comparative analysis was performed using one-way ANOVA on ranks and pairwise comparisons between the groups.

RESULTS

The mean concentrations (particles/cm3) and coefficient of variants for the DiSCmini particulate counter were MD: 5140 (1.6), B: 30700 (1.5), BS: 25001 (0.8), CB: 54814 (1.7), CBY: 2395 (1.3) and BSY: 11552 (1.0). Mean concentrations for the CPC particulate counter were MD: 1223 (1.4), B: 3405 (0.7), BS: 5002 (0.9), CB: 13273 (1.0), CBY: 1048 (1.2) and BSY: 3046 (0.6). The lowest mean concentrations were noted in cases using MD and the highest in cases using CB. However, after mitigation, CBY had the lowest overall levels.

CONCLUSION

Tonsillectomy technique does impact the levels of nanoparticles emitted within the surgical plume, which may present an occupational hazard for operating room personnel.

LEVEL OF EVIDENCE

3 Laryngoscope, 134:2444-2448, 2024.

Occupational exposure to crystalline silica in artificial stone processing

Respirable Crystalline Silica (RCS) is a hazardous substance with known effects that can be well correlated with exposure levels that still persist in many traditional sectors, such as construction or stone processing. In the past decade, exposure scenarios for RCS have been found in the sector of artificial stone processing. The aim of this study is to evaluate the levels of RCS in facilities specialized in the production of artificial stone countertops and other accessories for the furnishing of kitchens, bathrooms, and offices after the introduction of some preventive technical measures such as wet processing or local exhaust ventilation systems. The study involved 51 subjects in four facilities. Personal silica exposure assessment was carried out using GS3 cyclones positioned in the breathing zone during the work shift. Quantitative determination of silica was carried out by X-ray diffraction analysis. Respirable dust levels were in the range 0.046-1.154 mg/m³ with RCS levels within the range <0.003-0.098 mg/m³. The highest exposure was found in dry finishing operations. Although there was a remarkable reduction in RCS exposure levels compared to what was observed in the past before the introduction of preventive measures, the data still showed hazardous exposure levels for some of the monitored activities.

Physicochemical characterization and genotoxicity of the broad class of carbon nanotubes and nanofibers used or produced in U.S. facilities

BACKGROUND

Carbon nanotubes and nanofibers (CNT/F) have known toxicity but simultaneous comparative studies of the broad material class, especially those with a larger diameter, with computational analyses linking toxicity to their fundamental material characteristics was lacking. It was unclear if all CNT/F confer similar toxicity, in particular, genotoxicity. Nine CNT/F (MW #1-7 and CNF #1-2), commonly found in exposure assessment studies of U.S. facilities, were evaluated with reported diameters ranging from 6 to 150 nm. All materials were extensively characterized to include distributions of physical dimensions and prevalence of bundled agglomerates. Human bronchial epithelial cells were exposed to the nine CNT/F (0-24 μg/ml) to determine cell viability, inflammation, cellular oxidative stress, micronuclei formation, and DNA double-strand breakage. Computational modeling was used to understand various permutations of physicochemical characteristics and toxicity outcomes.

RESULTS

Analyses of the CNT/F physicochemical characteristics illustrate that using detailed distributions of physical dimensions provided a more consistent grouping of CNT/F compared to using particle dimension means alone. In fact, analysis of binning of nominal tube physical dimensions alone produced a similar grouping as all characterization parameters together. All materials induced epithelial cell toxicity and micronuclei formation within the dose range tested. Cellular oxidative stress, DNA double strand breaks, and micronuclei formation consistently clustered together and with larger physical CNT/F dimensions and agglomerate characteristics but were distinct from inflammatory protein changes. Larger nominal tube diameters, greater lengths, and bundled agglomerate characteristics were associated with greater severity of effect. The portion of tubes with greater nominal length and larger diameters within a sample was not the majority in number, meaning a smaller percentage of tubes with these characteristics was sufficient to increase toxicity. Many of the traditional physicochemical characteristics including surface area, density, impurities, and dustiness did not cluster with the toxicity outcomes.

CONCLUSION

Distributions of physical dimensions provided more consistent grouping of CNT/F with respect to toxicity outcomes compared to means only. All CNT/F induced some level of genotoxicity in human epithelial cells. The severity of toxicity was dependent on the sample containing a proportion of tubes with greater nominal lengths and diameters.

Prevalence of maternal antenatal anxiety and its association with demographic and socioeconomic factors: A multicentre study in Italy

BACKGROUND

Maternal antenatal anxiety is very common, and despite its short- and long-term effects on both mothers and fetus outcomes, it has received less attention than it deserves in scientific research and clinical practice. Therefore, we aimed to estimate the prevalence of state anxiety in the antenatal period, and to analyze its association with demographic and socioeconomic factors.

METHODS

A total of 1142 pregnant women from nine Italian healthcare centers were assessed through the state scale of the State-Trait Anxiety Inventory and a clinical interview. Demographic and socioeconomic factors were also measured.

RESULTS

The prevalence of anxiety was 24.3% among pregnant women. There was a significantly higher risk of anxiety in pregnant women with low level of education (p < 0.01), who are jobless (p < 0.01), and who have economic problems (p < 0.01). Furthermore, pregnant women experience higher level of anxiety when they have not planned the pregnancy (p < 0.01), have a history of abortion (p < 0.05), and have children living at the time of the current pregnancy (p < 0.05).

CONCLUSION

There exists a significant association between maternal antenatal anxiety and economic conditions. Early evaluation of socioeconomic status of pregnant women and their families in order to identify disadvantaged situations might reduce the prevalence of antenatal anxiety and its direct and indirect costs.

Characterization of aerosolized particles from nanoclay-enabled composites during manipulation processes

Manufacturing, processing, use, and disposal of nanoclay-enabled composites potentially lead to the release of nanoclay particles from the polymer matrix in which they are embedded; however, exposures to airborne particles are poorly understood. The present study was conducted to characterize airborne particles released during sanding of nanoclay-enabled thermoplastic composites. Two types of nanoclay, Cloisite® 25A and Cloisite® 93A, were dispersed in polypropylene at 0%, 1%, and 4% loading by weight. Zirconium aluminum oxide (P100/P180 grits) and silicon carbide (P120/P320 grits) sandpapers were used to abrade composites in controlled experiments followed by real-time and offline particle analyses. Overall, sanding the virgin polypropylene with zirconium aluminum oxide sandpaper released more particles compared to silicon carbide sandpaper, with the later exhibiting similar or lower concentrations than that of polypropylene. Thus, a further investigation was performed for the samples collected using the zirconium aluminum oxide sandpaper. The 1% 25A, 1% 93A, and 4% 93A composites generated substantially higher particle number concentrations (1.3-2.6 times) and respirable mass concentrations (1.2-2.3 times) relative to the virgin polypropylene, while the 4% 25A composite produced comparable results, regardless of sandpaper type. It was observed that the majority of the inhalable particles were originated from composite materials with a significant number of protrusions of nanoclay (18-59%). These findings indicate that the percent loading and dispersion of nanoclay in the polypropylene modified the mechanical properties and thus, along with sandpaper type, affected the number of particles released during sanding, implicating the cause of potential adverse health effects.

Mitsui-7, heat-treated, and nitrogen-doped multi-walled carbon nanotubes elicit genotoxicity in human lung epithelial cells

Background

The unique physicochemical properties of multi-walled carbon nanotubes (MWCNT) have led to many industrial applications. Due to their low density and small size, MWCNT are easily aerosolized in the workplace making respiratory exposures likely in workers. The International Agency for Research on Cancer designated the pristine Mitsui-7 MWCNT (MWCNT-7) as a Group 2B carcinogen, but there was insufficient data to classify all other MWCNT. Previously, MWCNT exposed to high temperature (MWCNT-HT) or synthesized with nitrogen (MWCNT-ND) have been found to elicit attenuated toxicity; however, their genotoxic and carcinogenic potential are not known. Our aim was to measure the genotoxicity of MWCNT-7 compared to these two physicochemically-altered MWCNTs in human lung epithelial cells (BEAS-2B & SAEC).

Results

Dose-dependent partitioning of individual nanotubes in the cell nuclei was observed for each MWCNT material and was greatest for MWCNT-7. Exposure to each MWCNT led to significantly increased mitotic aberrations with multi- and monopolar spindle morphologies and fragmented centrosomes. Quantitative analysis of the spindle pole demonstrated significantly increased centrosome fragmentation from 0.024–2.4 μg/mL of each MWCNT. Significant aneuploidy was measured in a dose-response from each MWCNT-7, HT, and ND; the highest dose of 24 μg/mL produced 67, 61, and 55%, respectively. Chromosome analysis demonstrated significantly increased centromere fragmentation and translocations from each MWCNT at each dose. Following 24 h of exposure to MWCNT-7, ND and/or HT in BEAS-2B a significant arrest in the G1/S phase in the cell cycle occurred, whereas the MWCNT-ND also induced a G2 arrest. Primary SAEC exposed for 24 h to each MWCNT elicited a significantly greater arrest in the G1 and G2 phases. However, SAEC arrested in the G1/S phase after 72 h of exposure. Lastly, a significant increase in clonal growth was observed one month after exposure to 0.024 μg/mL MWCNT-HT & ND.

Conclusions

Although MWCNT-HT & ND cause a lower incidence of genotoxicity, all three MWCNTs cause the same type of mitotic and chromosomal disruptions. Chromosomal fragmentation and translocations have not been observed with other nanomaterials. Because in vitro genotoxicity is correlated with in vivo genotoxic response, these studies in primary human lung cells may predict the genotoxic potency in exposed human populations.

Electronic supplementary material

The online version of this article (10.1186/s12989-019-0318-0) contains supplementary material, which is available to authorized users.

In Vivo Toxicity Assessment of Occupational Components of the Carbon Nanotube Life Cycle To Provide Context to Potential Health Effects

Pulmonary toxicity studies on carbon nanotubes focus primarily on as-produced materials and rarely are guided by a life cycle perspective or integration with exposure assessment. Understanding toxicity beyond the as-produced, or pure native material, is critical, due to modifications needed to overcome barriers to commercialization of applications. In the first series of studies, the toxicity of as-produced carbon nanotubes and their polymer-coated counterparts was evaluated in reference to exposure assessment, material characterization, and stability of the polymer coating in biological fluids. The second series of studies examined the toxicity of aerosols generated from sanding polymer-coated carbon-nanotube-embedded or neat composites. Postproduction modification by polymer coating did not enhance pulmonary injury, inflammation, and pathology or in vitro genotoxicity of as-produced carbon nanotubes, and for a particular coating, toxicity was significantly attenuated. The aerosols generated from sanding composites embedded with polymer-coated carbon nanotubes contained no evidence of free nanotubes. The percent weight incorporation of polymer-coated carbon nanotubes, 0.15% or 3% by mass, and composite matrix utilized altered the particle size distribution and, in certain circumstances, influenced acute in vivo toxicity. Our study provides perspective that, while the number of workers and consumers increases along the life cycle, toxicity and/or potential for exposure to the as-produced material may greatly diminish.

Scenarios and methods that induce protruding or released CNTs after degradation of nanocomposite materials

ABSTRACT

Nanocomposite materials may be considered as a low-risk application of nanotechnology, if the nanofillers remain embedded throughout the life-cycle of the products in which they are embedded. We hypothesize that release of free CNTs occurs by a combination of mechanical stress and chemical degradation of the polymer matrix. We experimentally address limiting cases: Mechanically released fragments may show tubular protrusions on their surface. Here we identify these protrusions unambiguously as naked CNTs by chemically resolved microscopy and a suitable preparation protocol. By size-selective quantification of fragments we establish as a lower limit that at least 95 % of the CNTs remain embedded. Contrary to classical fiber composite approaches, we link this phenomenon to matrix materials with only a few percent elongation at break, predicting which materials should still cover their CNT nanofillers after machining. Protruding networks of CNTs remain after photochemical degradation of the matrix, and we show that it takes the worst case combinations of weathering plus high-shear wear to release free CNTs in the order of mg/m²/year. Synergy of chemical degradation and mechanical energy input is identified as the priority scenario of CNT release, but its lab simulation by combined methods is still far from real-world validation.

Abstract 5464: Genotoxicity of multi-walled carbon nanotubes at occupationally relevant doses

Carbon nanotubes represent a creative alternative for applications in medicine as therapeutic vectors, imaging and controlled release of active molecules. Although the low density and small size of carbon nanotubes makes respiratory exposures to workers likely during the production or use of commercial products, the potential genotoxicity of multi-walled carbon nanotubes has not been investigated. We have previously shown mitotic spindle aberrations in cultured primary and immortalized human airway epithelial cells exposed to single-walled carbon nanotubes (SWCNT). In order to investigate whether genetic damage was unique to SWCNT, we examined mitotic spindle aberrations following dosing of cells to multi-walled carbon nanotubes (MWCNT) at concentrations anticipated in the workplace. Immortalized and primary respiratory epithelial cells were exposed to 0.024, 0.24, 2.4, and 24μg/cm2 carbon nanotubes. The minimal dose of MWCNT considered for this research was based on the permissible exposure limit for particles with an aerodynamic diameter of less than 5 microns (Occupation Safety and Health Administration). MWCNT induced a dose response of disrupted centrosomes, mitotic spindles and aneuploid chromosome number. The data further showed that monopolar mitotic spindles comprised 95% of the disrupted mitoses. The monopolar phenotype of the disrupted mitotic spindles is in sharp contrast to the multi-polar spindle of SWCNT-induced disruption. Three-dimensional reconstructions showed carbon nanotubes integrated with the microtubules, the DNA and within the centrosome structure. The lower doses did not cause cytotoxicity or apoptosis 24 hours after exposure; however, after 72 hours, significant cytotoxicity was observed in the MWCNT-exposed cells. Disruption of the centrosome is common in many solid tumors including lung cancer. The resulting aneuploidy is a key event in the progression of cancer and is correlated with tumor stage. Our results demonstrate significant disruption of the mitotic spindle by MWCNT at occupationally relevant doses. These results suggest caution should be used in the handling and processing of carbon nanotubes.

Citation Format: {Authors}. {Abstract title} [abstract]. In: Proceedings of the 103rd Annual Meeting of the American Association for Cancer Research; 2012 Mar 31-Apr 4; Chicago, IL. Philadelphia (PA): AACR; Cancer Res 2012;72(8 Suppl):Abstract nr 5464. doi:1538-7445.AM2012-5464