Assessing progressive changes in axial plane vertebral deformity in adolescent idiopathic scoliosis using sequential magnetic resonance imaging

PURPOSE

To understand how the axial plane deformity contributes to progression of the three-dimensional spinal deformity of Adolescent Idiopathic Scoliosis (AIS), with a main thoracic curve type, using a series of sequential magnetic resonance images (MRI).

METHODS

Twenty-seven AIS patients (at scan 1: mean 12.4 years (± 1.5), mean Cobb angle 29.1°(± 8.8°)) had 3 MRI scans (T4-L1) performed at intervals of mean 0.7 years (± 0.4). The outer profile of the superior and inferior endplates were traced on a reformatted axial image using ImageJ (NIH). Endplate AVR, and intravertebral rotation (IVR), defined as the difference between superior and inferior endplate AVR, was calculated for each vertebral level.

RESULTS

For all patients and scans, the mean AVR was greatest at the curve apex, with AVR diminishing in a caudal and cephalic direction from the apex. At scan 3 the mean apical AVR was 15.1°(± 4.6°) with a mean change in apical AVR between MRI 1 and 3 of 2.7°(± 2.9°). The increase in standing height between MRI 1 and 3 was mean 7.4 cm (± 4.6). Linear regression showed a positive correlation between apical AVR and Cobb angle (R2 = 0.57, P < 0.001), and a positive correlation between apical AVR and rib hump (R2 = 0.54, p < 0.001). The mean change in IVR was greater 3 vertebral levels cephalic and caudal to the apex (1.4°(± 4.1°) and 1.2°(± 2.0°), respectively), compared to the apex (0.4°(± 3.1°)).

CONCLUSIONS

AVR increased, during curve progression, most markedly at the curve apex. The greatest IVR was observed at the periapical levels, with the apex by contrast having only a modest degree of rotation, suggesting the periapical vertebral levels of the scoliosis deformity may be a significant driver in the progression of AIS.

Comparison of physiological and behavioral nutrition-related factors in people with and without adolescent idiopathic scoliosis, from cohort data at 8 to 20 years

Nutrition-related variables including lower body mass index (BMI), lower bone mineral density (BMD), altered body composition and hormone levels have been reported in adolescent idiopathic scoliosis (AIS). The aims of this study were to determine if physiological and behavioral nutrition-related factors differ between people with and without AIS, and to quantify their relationship with AIS, in unbiased cohort sample. BMI, presence of an eating disorder, leptin, adiponectin, BMD, vitamin D, lean mass, and fat mass were compared between those with and without AIS at ages 8, 10, 14, 17, and 20 years, and multiple logistic regression was performed between these variables and AIS. Lower total body BMD (median, 1.0 g/cm2 vs 1.1 g/cm2; p = .03) and lean mass (median, 38.8 kg vs 46.0 kg; p = .04) at age 20 years were observed in those with AIS compared to those without scoliosis. At age 20, the odds of AIS were 3.23 times higher for adolescents with an eating disorder compared to those with no eating disorder (95% CI, 1.02-8.63) when adjusted for BMI. Every 1 kg/m2 increase in BMI decreased the odds of AIS by 0.88 times (95% CI, 0.76-0.98), after adjusting for eating disorder diagnosis. In conclusion, lower BMI in mid-adolescence and presence of eating disorder outcomes, lower BMD, and lower lean mass in late adolescence were associated with the presence of AIS. Current data do not explain the mechanisms for these associations but suggest that serum leptin, adiponectin, and vitamin D are unlikely to be contributing factors. Conclusive determination of the prevalence of eating disorders in AIS will require further studies with larger sample sizes.

Quantifying Muscle Size Asymmetry in Adolescent Idiopathic Scoliosis Using Three-dimensional Magnetic Resonance Imaging

STUDY DESIGN

This is a case-control study of prospectively collected data.

OBJECTIVE

To quantify paraspinal muscle size asymmetry in adolescent idiopathic scoliosis (AIS) and determine if this asymmetry is (i) greater than observed in adolescent controls with symmetrical spines; and (ii) positively associated with skeletal maturity using Risser grade, scoliosis severity using the Cobb angle, and chronological age in years.

SUMMARY OF BACKGROUND DATA

AIS is a three-dimensional deformity of the spine which occurs in 2.5% to 3.7% of the Australian population. There is some evidence of asymmetry in paraspinal muscle activation and morphology in AIS. Asymmetric paraspinal muscle forces may facilitate asymmetric vertebral growth during adolescence.

METHODS

An asymmetry index [Ln(concave/convex volume)] of deep and superficial paraspinal muscle volumes, at the level of the major curve apex (Thoracic 8-9 th vertebral level) and lower-end vertebrae ( LEV , Thoracic 10-12 th vertebral level), was determined from three-dimensional Magnetic Resonance Imaging of 25 adolescents with AIS (all right thoracic curves), and 22 healthy controls (convex=left); all female, 10 to 16 years.

RESULTS

Asymmetry index of deep paraspinal muscle volumes was greater in AIS (0.16±0.20) than healthy spine controls (-0.06±0.13) at the level of the apex ( P <0.01, linear mixed-effects analysis) but not LEV ( P >0.05). Asymmetry index was positively correlated with Risser grade ( r =0.50, P <0.05) and scoliosis Cobb angle ( r =0.45, P <0.05), but not age ( r =0.34, P >0.05). There was no difference in the asymmetry index of superficial paraspinal muscle volumes between AIS and controls ( P >0.05).

CONCLUSIONS

The asymmetry of deep apical paraspinal muscle volume in AIS at the scoliosis apex is greater than that observed at equivalent vertebral levels in controls and may play a role in the pathogenesis of AIS.

Quantifying Typical Progression of Adolescent Idiopathic Scoliosis: Longitudinal Three-Dimensional MRI Measures of Disk and Vertebral Deformities

STUDY DESIGN

A prospective cohort study.

OBJECTIVE

Detail typical three-dimensional segmental deformities and their rates of change that occur within developing adolescent idiopathic scoliosis (AIS) spines over multiple timepoints.

SUMMARY OF BACKGROUND DATA

AIS is a potentially progressive deforming condition that occurs in three dimensions of the scoliotic spine during periods of growth. However, there remains a gap for multiple timepoint segmental deformity analysis in AIS cohorts during development.

MATERIALS AND METHODS

Thirty-six female patients with Lenke 1 AIS curves underwent two to six sequential magnetic resonance images. Scans were reformatted to produce images in orthogonal dimensions. Wedging angles and rotatory values were measured for segmental elements within the major curve. Two-tailed, paired t tests compared morphologic differences between sequential scans. Rates of change were calculated for variables given the actual time between successive scans. Pearson correlation coefficients were determined for multidimensional deformity measurements.

RESULTS

Vertebral bodies were typically coronally convexly wedged, locally lordotic, convexly axially rotated, and demonstrated evidence of local mechanical torsion. Between the first and final scans, apical measures of coronal wedging and axial rotation were all greater in both vertebral and intervertebral disk morphology than nonapical regions (all reaching differences where P <0.05). No measures of sagittal deformity demonstrated a statistically significant change between scans. Cross-planar correlations were predominantly apparent between coronal and axial planes, with sagittal plane parameters rarely correlating across dimensions. Rates of segmental deformity changes between earlier scans were characterized by coronal plane convex wedging and convexly directed axial rotation. The major locally lordotic deformity changes that did occur in the sagittal plane were static between scans.

CONCLUSIONS

This novel investigation documented a three-dimensional characterization of segmental elements of the growing AIS spine and reported these changes across multiple timepoints. Segmental elements are typically deformed from initial presentation, and subsequent changes occur in separate orthogonal planes at unique times.

Development and validation of a semi-automated measurement tool for calculating consistent and reliable surface metrics describing cosmesis in Adolescent Idiopathic Scoliosis

Adolescent Idiopathic Scoliosis (AIS) is a 3D spine deformity that also causes ribcage and torso distortion. While clinical metrics are important for monitoring disorder progression, patients are often most concerned about their cosmesis. The aim of this study was to automate the quantification of AIS cosmesis metrics, which can be measured reliably from patient-specific 3D surface scans (3DSS). An existing database of 3DSS for pre-operative AIS patients treated at the Queensland Children's Hospital was used to create 30 calibrated 3D virtual models. A modular generative design algorithm was developed on the Rhino-Grasshopper software to measure five key AIS cosmesis metrics from these models-shoulder, scapula and hip asymmetry, torso rotation and head-pelvis shift. Repeat cosmetic measurements were calculated from user-selected input on the Grasshopper graphical interface. InterClass-correlation (ICC) was used to determine intra- and inter-user reliability. Torso rotation and head-pelvis shift measurements showed excellent reliability (> 0.9), shoulder asymmetry measurements showed good to excellent reliability (> 0.7) and scapula and hip asymmetry measurements showed good to moderate reliability (> 0.5). The ICC results indicated that experience with AIS was not required to reliably measure shoulder asymmetry, torso rotation and head-pelvis shift, but was necessary for the other metrics. This new semi-automated workflow reliably characterises external torso deformity, reduces the dependence on manual anatomical landmarking, and does not require bulky/expensive equipment.

Advancing Use of DEXA Scans to Quantitatively and Qualitatively Evaluate Lateral Spinal Curves, for Preliminary Identification of Adolescent Idiopathic Scoliosis

Dual-energy X-ray absorptiometry (DEXA) scan is an emerging screening method for identifying likely adolescent idiopathic scoliosis (AIS). Using DEXA in an unbiased population sample (the Raine Study), we aimed to report the inter-rater reliability and minimal detectable change (MDC₉₅) for scoliosis curve angle measurement, identify likely AIS prevalence, and the concordance between reported AIS diagnosis and DEXA-identified likely AIS. Scoliosis curve angles were measured using the modified Ferguson method on DEXA scans (n = 1238) at age 20 years. For curve angle inter-rater reliability, two examiners measured angles (6-40°) on 41 scans. Likely, AIS was determined with quantitative and qualitative criteria (modified Ferguson angles ≥ 10° and expert review of spinal curves).The inter-rater reliability for scoliosis curve angle measurement was good-excellent (ICC: 0.82; 95% CI: 0.71-0.89; p < 0.001), and MDC₉₅ was 6.2°. The prevalence of likely AIS was 2.1% (26/1238). Diagnosis of AIS was reported despite little or no scoliosis curve (< 3.8°) for 20 participants (1.6%), and diagnosis of AIS was not reported despite scoliosis curve ≥ 10° for 11 participants (0.9%). Results support the use of modified Ferguson method to measure scoliosis curve angles on DEXA. There is potential utility for using a combination of quantitative measurement and qualitative criteria to evaluate DEXA images, to identify likely AIS for reporting prevalence. Without formal school screening, the analysis of DEXA in this population sample suggested that relying on current health professional diagnosis alone could result in 2.5% of this cohort being at risk of false positive diagnosis or delay in necessary management due to non-diagnosis of AIS.

Patient-Customised Theatre Mattress Supports for Spinal Surgery: A Pilot Study Presenting a Novel Engineering Virtual Design and Manufacturing Technique

Optimal patient positioning for spine surgery is vital for surgical success and the minimisation of complications intra-/post-operatively. In patients with complex co-morbidities, commercially available surgical positioning equipment is inadequate. To overcome this, a novel method was developed to create custom-fit patient-specific theatre mattresses for patients undergoing spine surgery. An innovative digital workflow involving 3D surface scanning, 3D simulation and computer aided design was developed to manufacture customised theatre supports with patient-specific requirements. These supports offered the surgeon an enhanced ability to relieve load bearing on prominent anatomical features or where desired, to tailor the support surface to the patient's anatomy for lengthy surgery. The bespoke theatre mattress was evaluated by whether the support resulted in a complication-free surgery. Using this new workflow, case examples for two patients with complex co-morbidities were described. The spine surgeon and anaesthetist reported the patient-specific custom mattresses were fit as per the required design, provided sufficient clearance around anatomical prominences and areas that required to be unloaded, had sufficient clearance for the anaesthetic method and cannulation, provided excellent surgical access and stability during surgery, and postoperatively no soft tissue overload over bony prominence and implanted devices. Positive patient outcomes after successful lengthy surgical interventions were associated with these patient-specific, contoured mattress supports. Future projects will seek to utilise this technology for other types of surgeries and intra-operative positioning requirements, and for a broader demographic of patients in both the paediatric and adult setting.

Adolescent idiopathic scoliosis 3D vertebral morphology, progression and nomenclature: a current concepts review

PURPOSE

There has been a recent shift toward the analysis of the pathoanatomical variation of the adolescent idiopathic scoliosis (AIS) spine with the three dimensions, and research of level-wise vertebral body morphology in single anatomical planes is now replete within the field. In addition to providing a precise description of the osseous structures that are the focus of instrumented surgical interventions, understanding the anatomical variation between vertebral bodies will elucidate possible pathoaetiological mechanisms of the onset of scoliotic deformity.

METHODS

This review aimed to discuss the current landscape of AIS segmental vertebral morphology research and provide a comprehensive report of the typical patterns observed at the individual vertebral level.

RESULTS

We have detailed how these vertebrae are typically characterised by lateral wedging to the convexity, have a marked degree of anterior overgrowth, are rotated towards the convexity, have inherent gyratory mechanical torsion created within them and are associated with pedicles on the concave side being narrower, longer and more laterally angled. For the most part, these findings are most pronounced at and around the apex of a scoliotic curve, with these deformations reducing towards junctional vertebrae. We have also summarised a nomenclature defined by the Scoliosis Research Society, highlighting the need for more consistent reporting of these level-wise dimensional anatomical changes.

CONCLUSION

Finally, we emphasised how a marked degree of heterogeneity exists between the included investigations, namely in scoliotic curve-type inclusion, imaging modality and timepoint of analysis within scoliosis' longitudinal development, and how improvement in these study design characteristics will enhance ongoing research.

Characterization of progressive changes in pedicle morphometry and neurovascular anatomy during growth in adolescent idiopathic scoliosis versus adolescents without scoliosis

STUDY DESIGN

Prospective cohort study.

OBJECTIVES

Investigate the progressive changes in pedicle morphometry and the spatial relationship between the pedicles and neurovascular structures in patients with AIS during growth. Adolescent idiopathic scoliosis (AIS) is a complex three-dimensional spine deformity. AIS pedicles are known to be asymmetrical when compared to adolescents without scoliosis. Defining the anatomical changes occurring progressively in scoliosis as it increases with time and growth is essential for understanding the pathophysiology of scoliosis and for treatment planning. MRI is the ideal method to study the growing spine without ionising radiation.

METHODS

24 females with AIS (mean 12.6 years, right sided main thoracic curves) and 20 non-scoliotic females (mean 11.5 years) were selected from an ongoing database. Participants underwent two 3D MRI scans (3 T scanner, T1, 0.5 mm isotropic voxels) approximately 1 year apart (AIS: mean 1.3 ± 0.05 years, control: mean 1.0 ± 0.1 years). The pedicle width, chord length, pedicle height, transverse pedicle angle, sagittal pedicle angle, distance from vertebrae to aorta and distance from pedicle to dural sac were measured from T5 to T12. Inter- and intra-observer variability was assessed.

RESULTS

From scans 1-2 in the AIS group, the dural sac became closer to the left pedicle (p < 0.05, T6, T8-T10 and T12) while the distance from the vertebrae to the aorta increased (p < 0.05, T6-T10). No significant changes in these measurements were observed in the non-scoliotic group. Between scans, the AIS chord length and transverse pedicle angle increased on the left side around the apex (p < 0.05) creating asymmetries not seen in the non-scoliotic cohort. The mean pedicle height increased symmetrically in the non-scoliosis cohort (p < 0.05) and asymmetrically in the AIS group with the right side growing faster than the left at T6-T7 (p < 0.05).

CONCLUSION

Asymmetrical growth patterns occur in the vertebral posterior elements of AIS patients compared to the symmetrical growth patterns found in the non-scoliotic participants.

LEVEL OF EVIDENCE

Level II prospective comparative study.

Sequential MRI reveals vertebral body wedging significantly contributes to coronal plane deformity progression in adolescent idiopathic scoliosis during growth

STUDY DESIGN

Cross-sectional study.

OBJECTIVES

To provide a comprehensive, multi-stage investigation of vertebral body (VB) and intervertebral disc (IVD) coronal plane deformities for adolescent idiopathic scoliosis (AIS) patients with a main thoracic curve type, using a series of sequential magnetic resonance images (MRIs). Despite numerous investigations of AIS deformity at the spinal segmental level, there is little consensus as to the major contributor to the lateral curvature of a scoliotic spine. Moreover, scoliotic deformity is often described along a continuum of progression, with few studies having characterised the change in segmental deformity for AIS patients whose deformity progresses clinically over time.

METHODS

30 female AIS patients with primary thoracic curves were included between 2012 and 2016. Three sequential MRIs were captured for each patient. Datasets were reformatted to produce true coronal plane images of the thoracic spine (T4-L1). Overall curve morphology, coronal plane IVD and VB segmental deformity and rates of growth were analysed.

RESULTS

Right-side asymmetry was greater in IVDs (18.5 ± 23.9%) when compared to VBs (8.3 ± 9.2%) (P < 0.05) by third scans. Despite this, 77% of patients demonstrated the majority (> 50%) of their coronal curvature was attributed to VB wedging when measured across all three scans. Regardless of progression status, scan number, or region, the sum of the VB wedging angle was greater than the sum of the IVD wedging angle (all P ≤ 0.05). There was no correlation between the rates of major curve angle progression and standing height increase, VB height growth, or IVD height growth (P > 0.05).

CONCLUSIONS

VB wedging contributed more to the lateral deformity observed in primary thoracic subtypes of AIS patients than IVD wedging. While IVDs demonstrated the greatest asymmetric deformity, their relatively smaller height resulted in a smaller proportional change in lateral curve angle compared to the VBs.

LEVEL OF EVIDENCE

IV.

Predicting spinal profile using 3D non-contact surface scanning: Changes in surface topography as a predictor of internal spinal alignment

Introduction

3D non-contact surface scanners capture highly accurate, calibrated images of surface topography for 3D structures. This study sought to establish the efficacy and accuracy of using 3D surface scanning to characterise spinal curvature and sagittal plane contour.

Methods

10 healthy female adults with a mean age of 25 years, (standard deviation: 3.6 years) underwent both MRI and 3D surface scanning (3DSS) (Artec Eva, Artec Group Inc., Luxembourg) while lying in the lateral decubitus position on a rigid substrate. Prior to 3DSS, anatomical landmarks on the spinous processes of each participant were demarcated using stickers attached to the skin surface. Following 3DSS, oil capsules (fiducial markers) were overlaid on the stickers and the subject underwent MRI. MRI stacks were processed to measure the thoracolumbar spinous process locations, providing an anatomical reference. 3D coordinates for the markers (surface stickers and MRI oil capsules) and for the spinous processes mapped the spinal column profiles and were compared to assess the quality of fit between the 3DSS and MRI marker positions.

Results

The RMSE for the polynomials fit to the spinous process, fiducial and surface marker profiles ranged from 0.17–1.15mm for all subjects. The MRI fiducial marker location was well aligned with the spinous process profile in the thoracic and upper lumbar spine for nine of the subjects. Over the 10 subjects, the mean RMSE between the MRI and 3D scan sagittal profiles for all surface markers was 9.8mm (SD 4.2mm). Curvature was well matched for seven of the subjects, with two showing differing curvatures across the lumbar spine due to inconsistent subject positioning.

Conclusion

Comparison of the observed trends for vertebral position measured from MRI and 3DSS, suggested the surface markers may provide a useful method for measuring internal changes in sagittal curvature or skeletal changes.

Determining a reliably visible and inexpensive surface fiducial marker for use in MRI: a research study in a busy Australian Radiology Department

OBJECTIVES

Single-use commercial surface fiducial markers are used in clinical imaging for a variety of applications. The current study sought to find a new, reliably visible, easily sourced and inexpensive fiducial marker alternative for use with MRI.

DESIGN

Five commonly requested MRI sequences were determined (three-dimensional (3D) T1-weighted, T1 coronal, 3D T2-weighted, T2 fat suppressed, proton density), to examine the visibility of 18 items (including a commercial fiducial marker).

SETTING

Clinical 3T MRI scanner in an Australian Tertiary Hospital and an Australian University Biomedical Engineering research group.

INTERVENTIONS

18 marker alternatives were scanned using five common MRI sequences. Images were reformatted to obtain both an image through the mid-height of each marker and a maximum intensity z-projection image over the volume of the marker. Variations in marker intensity were profiled across each visible marker and a visibility rating defined.

MAIN OUTCOME MEASURES

Outcome measures were based on quantitative assessment of a clear intensity contrast ratio between the marker and the adjacent tissue and a qualitative assessment of visibility via a 3-point scale.

RESULTS

The fish oil capsule, vitamin D capsule, paint ball pellet, soy sauce sushi tube and commercial markers were typically visible to a high quality on all the imaging sequences and demonstrated a clear differential in intensity contrast against the adjacent tissue. Other common items, such as plasticine 'play doh' and a soft 'Jelly baby' sweet, were surprise candidates, demonstrating high-quality visibility and intensity contrast for the 3D T1-weighted sequence.

CONCLUSIONS

Depending on the basis for referral and MRI sequence chosen, four alternative fiducial markers were determined to be inexpensive, easily sourced and consistently visible. Of these, the vitamin D capsule provided an excellent balance between availability, size, cost, usability and quality of the visualised marker for all the commonly used MRI sequences analysed.

Quantifying Anterior Chest Wall Deformity in Adolescent Idiopathic Scoliosis: Correlation With Other Deformity Measures and Effects of Anterior Thoracoscopic Scoliosis Surgery

STUDY DESIGN

Retrospective cohort study.

OBJECTIVES

This study investigated how anterior chest wall deformity is affected by thoracoscopic anterior scoliosis fusion (TASF) surgery in adolescent idiopathic scoliosis patients. We aimed to determine correlations pre- and postoperatively with other clinical and radiological scoliosis measures.

BACKGROUND DATA

Scoliosis surgery aims to halt progression of the deformity, and to reduce its severity. Currently, deformity correction is clinically measured in terms of Cobb angle and rib hump (RH); however, a significant cosmetic concern for patients is anterior chest wall deformity.

METHODS

Pre- and postoperative CT scans of 28 female, Lenke type 1 patients with a mean preoperative Cobb angle of 50.2° ± 7.1° were retrieved from the Research Group's surgical database. Using ImageJ, 3D reconstructions of the thorax were created. Two observers measured the anterior chest wall deformity as a chest wall angle (CWA) and posterior deformity as a posterior apical deformity angle (PDA). We investigated pre- to postoperative changes in CWA, PDA, RH, and Cobb angle as well as their interrelationship.

RESULTS

All deformity parameters (Cobb angle, RH, CWA, and PDA) showed statistically significant improvement post TASF. Correlation was found between RH and Cobb angle pre- and postoperatively, Cobb angle and CWA preoperatively and between postoperative change in Cobb angle and CWA. No relationship was found between CWA and RH or PDA.

CONCLUSIONS

Anterior chest wall deformity is independent from the posterior chest wall measures RH and PDA, indicating that the anterior chest wall deformity is not reflected in the posterior rib cage. The correlation between Cobb angle and CWA indicates that the deformity in the spine and the deformity in the ribs are related, and shows that the anterior chest wall deformity is improved post thoracoscopic anterior scoliosis fusion surgery as the lateral deviation of the spine is corrected.

LEVEL OF EVIDENCE

Level III.

Minimizing Spine Autofusion With the Use of Semiconstrained Growing Rods for Early Onset Scoliosis in Children

BACKGROUND

A new growing rod (GR) design, the semiconstrained growing rod (SCGR), with the added advantage of axial rotation freedom within the components, has been introduced at our center which has been shown to be growth friendly. We hypothesize that the SCGR system would reduce autofusion in vivo, thereby maximizing the coronal plane correction, T1-S1 growth, and the final correction achieved at definitive fusion for children with an early onset scoliosis.

METHODS

In total, 28 patients had either single or dual 5.5 mm diameter SCGR placed minimally invasively through a submuscular approach. Surgical lengthening procedures occurred approximately every 6 months until the definitive fusion procedure was performed for 18 patients. Scoliosis, kyphosis, and lordosis angles, T1-S1 trunk length, and any complications encountered were evaluated.

RESULTS

For the full cohort, before GR insertion, the mean major Cobb curve angle was 72.4 degrees (SD, 18.8; range, 45 to 120), mean T1-S1 trunk length was 282 mm (SD, 59; range, 129 to 365), and at the latest follow-up (mean 6.9 y, SD 3.3, range 2.0 to 13.0), 38.8 degrees (SD, 17.5; range 10 to 90) and 377 mm (SD, 62; range, 225 to 487), respectively. For the subset of 18 patients who have had their final instrumented fusion surgery, the definitive surgery procedure alone produced a correction of the major Cobb curve angle by mean 20.3 degrees (SD, 16.1; P<0.0001), and an increase in the T1-S1 trunk length of mean 31.7 mm (SD, 23.1; P<0.0001). There were 14 complications involving 11 of the 28 patients, giving rise to 5 unplanned surgical interventions and 1 case where GR treatment was abandoned.

CONCLUSIONS

SCGR patients exhibited statistically significant increase in T1-S1 trunk length and statistically significant decrease in the severity of scoliosis over the course of GR treatment and again, importantly, with the definitive fusion surgery, suggesting that autofusion had been minimized during GR treatment with relatively low complication rates.

LEVEL OF EVIDENCE

Level IV-case series.

Is vertebral rotation correction maintained after thoracoscopic anterior scoliosis surgery? A low-dose computed tomography study

Background

Axial vertebral rotation is a key characteristic of adolescent idiopathic scoliosis (AIS), and its reduction is one of the goals of corrective surgery. Recurrence of deformity after surgical correction may relate to rotation changes that occur in the anterior vertebral column after surgery, but whether any change occurs within the fused segment or in adjacent unfused levels following thoracoscopic anterior spinal fusion (TASF) is unknown. An analysis of measurements from an existing postoperative CT dataset was performed to investigate the occurrence of inter- and intra-vertebral rotation changes after TASF within and adjacent to the fused spinal segment and look for any relationships with the Cobb angle and rib hump in the two years after surgery.

Methods

39 Lenke Type 1 main thoracic patients underwent TASF for progressive AIS and low dose computed tomography scanning of the instrumented levels of the spine at 6 and 24 months after surgery. Vertebral rotation was measured at the superior and inferior endplates on true axial images for all vertebral levels in the fused segment plus one adjacent level cranially and caudally. Intra-observer variability for rotation measurements was assessed using 95% limits of agreement to detect significant changes in inter/intra-vertebral rotation.

Results

Significant local changes in inter- and intra-vertebral rotation were found to have occurred between 6 and 24 months after anterior surgical fusion within the fused spinal segment, albeit with no consistent pattern of location or direction within the instrumented fusion construct. No significant en-bloc movement of the entire fused spinal segment relative to the adjacent un-instrumented cranial and caudal intervertebral levels was found. No clear correlation was found between any vertebral rotation changes and Cobb angle or rib hump measures.

Conclusions

Localised inter- and intra-vertebral rotation occurs between 6 and 24 months after TASF, both within the instrumented spinal segments and in the adjacent un-instrumented levels of the adolescent spine. The lack of measurable en-bloc movement of the fused segment relative to the adjacent un-instrumented levels suggests that overall stability of the instrumented construct is achieved, however the vertebrae within the fusion mass continue to adapt and remodel, resulting in ongoing local anatomical and biomechanical changes in the adolescent spine.

Change in Lung Volume Following Thoracoscopic Anterior Spinal Fusion Surgery: A 3-Dimensional Computed Tomography Investigation

STUDY DESIGN

Lung volumes and thoracic anatomy were measured from low-dose computed tomography (CT) scans preoperatively and 2 years following thoracoscopic anterior spinal fusion (TASF) for adolescent idiopathic scoliosis (AIS).

OBJECTIVE

The aim of this study was to assess changes in lung volume after TASF surgical correction.

SUMMARY OF BACKGROUND DATA

AIS patients are known to have decreased pulmonary function as a consequence of their spinal and ribcage deformity. Several studies have evaluated changes in pulmonary function clinically after scoliosis correction surgery showing varied results. To date, there have been no published studies using CT to evaluate lung volume changes following TASF.

METHODS

Twenty-three female AIS patients with both pre- and 2 years postoperative low-dose CT scans were selected from an ethically approved, historical databank. Three-dimensional lung volumes were reconstructed to determine anatomical lung volumes. Right and left lung volumes, total lung volume, and right-to-left lung volume ratio were obtained as well as hemithoracic symmetry, to indicate the extent of thorax deformity. Cobb angle, rib hump, levels fused in surgery, and patient height were used for correlation analysis with the lung volume results.

RESULTS

Left lung volume, total lung volume, and hemithoracic ratio all increased significantly 2 years after surgery. There was no significant change in right-to-left lung volume ratio (P = 0.36). Statistical regression found significant positive correlation between lung volume changes, reduction in Cobb angle, increase in height, and improvement in hemithoracic symmetry ratio.

CONCLUSION

TASF resulted in a statistically significant increase in lung volume following surgery, as well as improvement in the symmetry of the thoracic architecture; however, the postoperative lung volumes remained in the lower 50th percentile relative to females without thoracic deformity. Furthermore, change in lung volume was significantly correlated with changes in Cobb angle, hemithoracic asymmetry, and increased patient height, which are important consequences of thoracic deformity correction surgery.

LEVEL OF EVIDENCE

3.

Sequential Magnetic Resonance Imaging Reveals Individual Level Deformities of Vertebrae and Discs in the Growing Scoliotic Spine

STUDY DESIGN

The aim of this study was to measure contributions of individual vertebra and disc wedging to coronal Cobb angle in the growing scoliotic spine using sequential magnetic resonance imaging (MRI). Clinically, the Cobb angle measures the overall curve in the coronal plane but does not measure individual vertebra and disc wedging. It was hypothesized that patients whose deformity progresses will have different patterns of coronal wedging in vertebrae and discs to those of patients whose deformities remain stable.

METHODS

A group of adolescent idiopathic scoliosis (AIS) patients each received two to four MRI scans (spaced 3-12 months apart). The coronal plane wedge angles of each vertebra and disc in the major curve were measured for each scan, and the proportions and patterns of wedging in vertebrae and discs were analyzed for subgroups of patients whose spinal deformity did and did not progress during the study period.

RESULTS

Sixteen patients were included in the study; the mean patient age was 12.9 years (standard deviation 1.7 years). All patients were classified as right-sided major thoracic Lenke Type 1 curves (9 type 1A, 4 type 1B, and 3 type 1C). Cobb angle progression of ≥5° between scans was seen in 56% of patients. Although there were measurable changes in the wedging of individual vertebrae and discs in all patients, there was no consistent pattern of deformity progression between patients who progressed and those who did not. The patterns of progression found in this study did not support the hypothesis of wedging commencing in the discs and then transferring to the vertebrae.

CONCLUSION

Sequential MRI data showed complex patterns of deformity progression. Changes to the wedging of individual vertebrae and discs may occur in patients who have no increase in Cobb angle; therefore, the Cobb method alone may be insufficient to capture the complex mechanisms of deformity progression.

Evaluating the Change in Axial Vertebral Rotation Following Thoracoscopic Anterior Scoliosis Surgery Using Low-Dose Computed Tomography

BACKGROUND CONTEXT

In recent years, there has been increasing appreciation of the need to treat scoliosis as a three-dimensional deformity.

PURPOSE

Assessment of surgical strategies and outcomes should consider not only the coronal plane correction but also derotation of the transverse plane deformity that can affect trunk appearance.

STUDY DESIGN

This study included a cohort of 29 female adolescent idiopathic scoliosis patients who received thoracoscopic single rod anterior fusion (TASF) surgery. This study used pre- and postoperative low-dose computed tomographic (CT) scans to accurately measure apical axial vertebral rotation (AVR).

METHODS

The pre- and postoperative values for clinically measured coronal Cobb correction and rib hump correction as well as AVR were compared to determine whether these values improved postoperatively. There are no conflicts of interest to report for authors of this investigation.

RESULTS

As expected, statistically significant reductions in coronal Cobb angle (mean preoperative Cobb 51°, reducing to 24° at the two-year follow-up) and rib hump (mean preoperative rib hump 15°, reducing to 7° at two-year follow-up) were achieved. The mean reduction in apical AVR measured using CT was only 3° (mean preoperative AVR 16°, reducing to 13° at two-year follow-up), which was statistically but not clinically significant. Significant correlations were found between Cobb angle and rib hump, between Cobb angle and AVR, and between AVR and rib hump, suggesting that patients with greater coronal Cobb correction also achieve better derotation with this surgical procedure.

CONCLUSIONS

The historical low-dose CT data set permitted detailed three-dimensional assessment of the deformity correction that is achieved using thoracoscopic anterior spinal fusion for progressive adolescent idiopathic scoliosis.

Is There Asymmetry Between the Concave and Convex Pedicles in Adolescent Idiopathic Scoliosis? A CT Investigation

BACKGROUND

Adolescent idiopathic scoliosis is a complex three-dimensional deformity of the spine characterized by deformities in the sagittal, coronal, and axial planes. Spinal fusion using pedicle screw instrumentation is a widely used method for surgical correction in severe (coronal deformity, Cobb angle > 45°) adolescent idiopathic scoliosis curves. Understanding the anatomic difference in the pedicles of patients with adolescent idiopathic scoliosis is essential to reduce the risk of neurovascular or visceral injury through pedicle screw misplacement.

QUESTIONS/PURPOSES

To use CT scans (1) to analyze pedicle anatomy in the adolescent thoracic scoliotic spine comparing concave and convex pedicles and (2) to assess the intra- and interobserver reliability of these measurements to provide critical information to spine surgeons regarding size, length, and angle of projection.

METHODS

Between 2007 and 2009, 27 patients with adolescent idiopathic scoliosis underwent thoracoscopic anterior correction surgery by two experienced spinal surgeons. Preoperatively, each patient underwent a CT scan as was their standard of care at that time. Twenty-two patients (mean age, 15.7 years; SD, 2.4 years; range, 11.6-22 years) (mean Cobb angle, 53°; SD, 5.3°; range, 42°-63°) were selected. Inclusion criteria were a clinical diagnosis of adolescent idiopathic scoliosis, female, and Lenke type 1 adolescent idiopathic scoliosis with the major curve confined to the thoracic spine. Using three-dimensional image analysis software, the pedicle width, inner cortical pedicle width, pedicle height, inner cortical pedicle height, pedicle length, chord length, transverse pedicle angle, and sagittal pedicle angles were measured. Randomly selected scans were remeasured by two of the authors and the reproducibility of the measurement definitions was validated through limit of agreement analysis.

RESULTS

The concave pedicle widths were smaller compared with the convex pedicle widths at T7, T8, and T9 by 37% (3.44 mm ± 1.16 mm vs 4.72 mm ± 1.02 mm; p < 0.001; mean difference, 1.27 mm; 95% CI, 0.92 mm-1.62 mm), 32% (3.66 mm ± 1.00 mm vs 4.82 mm ± 1.10 mm; p < 0.001; mean difference, 1.16 mm; 95% CI, 0.84 mm-1.49 mm), and 25% (4.10 mm ± 1.57 mm vs 5.12 mm ± 1.17 mm; p < 0.001; mean difference, 1.02 mm; 95% CI, 0.66 mm-1.39 mm), respectively. The concave pedicle heights were smaller than the convex at T5 (9.43 mm ± 0.98 vs 10.63 mm ± 1.10 mm; p = 0.002; mean difference, 1.02 mm; 95% CI, 0.59 mm-1.45 mm), T6 (8.87 mm ± 1.37 mm vs 10.88 mm ± 0.81 mm; p < 0.001; mean difference, 2.02 mm; 95% CI, 1.40 mm-2.63 mm), T7 (9.09 mm ± 1.24 mm vs 11.35 mm ± 0.84 mm; p < 0.001; mean difference, 2.26 mm; 95% CI, 1.81 mm-2.72 mm), and T8 (10.11 mm ± 1.05 mm vs 11.86 mm ± 0.88 mm; p < 0.001; mean difference, 1.75 mm; 95% CI, 1.30 mm-2.19 mm). Conversely, the concave transverse pedicle angle was larger than the convex at levels T6 (11.37° ± 4.48° vs 8.82° ± 4.31°; p = 0.004; mean difference, 2.54°; 95% CI, 1.10°-3.99°), T7 (12.69° ± 5.93° vs 8.65° ± 3.79°; p = 0.002; mean difference, 4.04°; 95% CI, 1.90°-6.17°), T8 (13.24° ± 5.28° vs 7.66° ± 4.87°; p < 0.001; mean difference, 5.58°; 95% CI, 2.99°-8.17°), and T9 (19.95° ± 5.69° vs 8.21° ± 4.02°; p < 0.001; mean difference, 4.74°; 95% CI, 2.68°-6.80°), indicating a more posterolateral to anteromedial pedicle orientation.

CONCLUSIONS

There is clinically important asymmetry in the morphologic features of pedicles in individuals with adolescent idiopathic scoliosis. The concave side of the curve compared with the convex side is smaller in height and width periapically. Furthermore, the trajectory of the pedicle is more acute on the convex side of the curve compared with the concave side around the apex of the curve. Knowledge of these anatomic variations is essential when performing scoliosis correction surgery to assist with selecting the correct pedicle screw size and trajectory of insertion to reduce the risk of pedicle wall perforation and neurovascular injury.

A comparison of four techniques to measure anterior and posterior vertebral body heights and sagittal plane wedge angles in adolescent idiopathic scoliosis

Adolescent idiopathic scoliosis (AIS) is a three-dimensional (3D) spinal deformity of unknown aetiology. Increased growth of the anterior part of the vertebrae known as anterior overgrowth has been proposed as a potential driver for AIS initiation and progression. To date, there has been no objective evaluation of the 3D measurement techniques used to identify this phenomenon and the majority of previous studies use 2D planar assessments which contain inherent projection errors due to the vertebral rotation which is part of the AIS deformity. In this study, vertebral body (VB) heights and wedge angles were measured in a test group of AIS patients and healthy controls using four different image analysis and measurement techniques. Significant differences were seen between the techniques in terms of VB heights and VB wedge angles. The low variability, and the fact that the rotation and tilt of the deformed VBs are taken into account, suggests that the proposed technique using the full 3D orientation of the vertebrae is the most reliable method to measure anterior and posterior VB heights and sagittal plane wedge angles in 3D image data sets. These results have relevance for future investigations that aim to quantify anterior overgrowth in AIS patients for comparison with healthy controls.

A comparison of vertebral venous networks in adolescent idiopathic scoliosis patients and healthy controls

PURPOSE

Cadaveric studies have previously documented a typical pattern of venous drainage within vertebral bodies (VBs), comprised primarily of the basivertebral vein. These studies, however, are limited by the number of samples available. MRI is able to provide 3D images of soft tissue structures in the spine, including the basivertebral vein without the use of contrast in both healthy controls and subjects with abnormal anatomy such as adolescent idiopathic scoliosis (AIS). This study aimed to quantify the venous networks within VBs of 15 healthy adolescent controls and 15 AIS patients.

METHODS

Five transverse slices through the VBs were examined simultaneously and the observable vascular network traced. The length of the network on the left and right sides of the VB was calculated, and the spatial patterning assessed level-by-level within each subject.

RESULTS

Significant differences were seen in the left/right distribution of vessels in both the control and AIS subjects, with both groups having greater length on the right side of all of their VBs. No difference was seen between AIS and control subjects in any region. Large individual variations in patterns were seen in both groups; however, the control group showed more consistent spatial patterning of the vascular networks across levels in comparison to the AIS group.

CONCLUSION

The length of the basivertebral vein was seen to have a significant bias to the right hand side of the VB in both healthy and AIS adolescents. The spatial pattern of this vein showed large variations in branching both within and across individuals. No significant differences were seen between AIS and control subjects, suggesting both that this network is preserved in deformed AIS vertebrae, and that the vertebral venous system does not play a role in the etiology of AIS.

Surgical fusion of early onset severe scoliosis increases survival in Rett syndrome: a cohort study

AIM

Scoliosis is a common comorbidity in Rett syndrome and spinal fusion may be recommended if severe. We investigated the impact of spinal fusion on survival and risk of severe lower respiratory tract infection in Rett syndrome.

METHOD

Data were ascertained from hospital medical records, the Australian Rett Syndrome Database, a longitudinal and population-based registry, and from the Australian Institute of Health and Welfare National Death Index database. Cox regression and generalized estimating equation models were used to estimate the effects of spinal surgery on survival and severe respiratory infection respectively in 140 females who developed severe scoliosis (Cobb angle ≥45°) before adulthood.

RESULTS

After adjusting for mutation type and age of scoliosis onset, the rate of death was lower in the surgery group (hazard ratio [HR] 0.30, 95% confidence interval [CI] 0.12-0.74; p=0.009) compared to those without surgery. Rate of death was particularly reduced for those with early onset scoliosis (HR 0.17, 95% CI 0.06-0.52; p=0.002). There was some evidence to suggest that spinal fusion was associated with a reduction in risk of severe respiratory infection among those with early onset scoliosis (risk ratio 0.41, 95% CI 0.16-1.03; p=0.06).

INTERPRETATION

With appropriate cautions, spinal fusion confers an advantage to life expectancy in Rett syndrome.

Morphometric Analysis of the Thoracic Intervertebral Foramen Osseous Anatomy in Adolescent Idiopathic Scoliosis Using Low-Dose Computed Tomography

PURPOSE

The dimensions of the thoracic intervertebral foramen in adolescent idiopathic scoliosis (AIS) have not previously been quantified. Better understanding of the dimensions of the foramen may be useful in surgical planning. This study describes a reproducible method for measurement of the thoracic foramen in AIS using computed tomography (CT).

METHODS

In 23 preoperative female patients with Lenke 1 type AIS with right-side convexity major curves confined to the thoracic spine the foraminal height (FH), foraminal width (FW), pedicle to superior articular process distance (P-SAP), and cross-sectional foraminal area (FA) were measured using multiplanar reconstructed CT. Measurements were made at entrance, midpoint, and exit of the thoracic foramina from T1-T2 to T11-T12. Results were also correlated with dependent variables of major curve Cobb angle measured on X-ray and CT, age, weight, Lenke classification subtype, Risser grade, and number of spinal levels in the major curve.

RESULTS

The FH, FW, P-SAP, and FA dimensions and ratios are all significantly larger on the convexity of the major curve and maximal at or close to the apex. Mean thoracic foraminal dimensions change in a predictable manner relative to position on the major thoracic curve. There was no statistically significant correlation with the measured foraminal dimensions or ratios and the individual dependent variables. The average ratio of convexity to concavity dimensions at the apex foramina for entrance, midpoint, and exit, respectively, are FH (1.50, 1.38, 1.25), FW (1.28, 1.30, 0.98), FA (2.06, 1.84, 1.32), and P-SAP (1.61, 1.47, 1.30).

CONCLUSION

Foraminal dimensions of the thoracic spine are significantly affected by AIS. Foraminal dimensions have a predictable convexity-to-concavity ratio relative to the proximity to the major curve apex. Surgeons should be aware of these anatomical differences during scoliosis correction surgery.

Understanding how axial loads on the spine influence segmental biomechanics for idiopathic scoliosis patients: A magnetic resonance imaging study

BACKGROUND

Segmental biomechanics of the scoliotic spine are important since the overall spinal deformity is comprised of the cumulative coronal and axial rotations of individual joints. This study investigates the coronal plane segmental biomechanics for adolescent idiopathic scoliosis patients in response to physiologically relevant axial compression.

METHODS

Individual spinal joint compliance in the coronal plane was measured for a series of 15 idiopathic scoliosis patients using axially loaded magnetic resonance imaging. Each patient was first imaged in the supine position with no axial load, and then again following application of an axial compressive load. Coronal plane disc wedge angles in the unloaded and loaded configurations were measured. Joint moments exerted by the axial compressive load were used to derive estimates of individual joint compliance.

FINDINGS

The mean standing major Cobb angle for this patient series was 46°. Mean intra-observer measurement error for endplate inclination was 1.6°. Following loading, initially highly wedged discs demonstrated a smaller change in wedge angle, than less wedged discs for certain spinal levels (+2,+1,-2 relative to the apex, (p<0.05)). Highly wedged discs were observed near the apex of the curve, which corresponded to lower joint compliance in the apical region.

INTERPRETATION

While individual patients exhibit substantial variability in disc wedge angles and joint compliance, overall there is a pattern of increased disc wedging near the curve apex, and reduced joint compliance in this region. Approaches such as this can provide valuable biomechanical data on in vivo spinal biomechanics of the scoliotic spine, for analysis of deformity progression and surgical planning.

Gravity-induced coronal plane joint moments in adolescent idiopathic scoliosis

Background

Adolescent Idiopathic Scoliosis is the most common type of spinal deformity, and whilst the isk of progression appears to be biomechanically mediated (larger deformities are more likely to progress), the detailed biomechanical mechanisms driving progression are not well understood. Gravitational forces in the upright position are the primary sustained loads experienced by the spine. In scoliosis they are asymmetrical, generating moments about the spinal joints which may promote asymmetrical growth and deformity progression. Using 3D imaging modalities to estimate segmental torso masses allows the gravitational loading on the scoliotic spine to be determined. The resulting distribution of joint moments aids understanding of the mechanics of scoliosis progression.

Methods

Existing low-dose CT scans were used to estimate torso segment masses and joint moments for 20 female scoliosis patients. Intervertebral joint moments at each vertebral level were found by summing the moments of each of the torso segment masses above the required joint.

Results

The patients’ mean age was 15.3 years (SD 2.3; range 11.9–22.3 years); mean thoracic major Cobb angle 52^° (SD 5.9^°; range 42–63^°) and mean weight 57.5 kg (SD 11.5 kg; range 41–84.7 kg). Joint moments of up to 7 Nm were estimated at the apical level. No significant correlation was found between the patients’ major Cobb angles and apical joint moments.

Conclusions

Patients with larger Cobb angles do not necessarily have higher joint moments, and curve shape is an important determinant of joint moment distribution. These findings may help to explain the variations in progression between individual patients. This study suggests that substantial corrective forces are required of either internal instrumentation or orthoses to effectively counter the gravity-induced moments acting to deform the spinal joints of idiopathic scoliosis patients.

Electronic supplementary material

The online version of this article (doi:10.1186/s13013-015-0060-9) contains supplementary material, which is available to authorized users.

Partial Intervertebral Fusion Secures Successful Outcomes After Thoracoscopic Anterior Scoliosis Correction: A Low-Dose Computed Tomography Study

STUDY DESIGN

Retrospective review of prospectively collected data.

OBJECTIVES

To analyze intervertebral (IV) fusion after thoracoscopic anterior spinal fusion (TASF) and explore the relationship between fusion scores and key clinical variables.

SUMMARY OF BACKGROUND INFORMATION

TASF provides comparable correction with some advantages over posterior approaches but reported mechanical complications, and their relationship to non-union and graft material is unclear. Similarly, the optimal combination of graft type and implant stiffness for effecting successful radiologic union remains undetermined.

METHODS

A subset of patients from a large single-center series who had TASF for progressive scoliosis underwent low-dose computed tomographic scans 2 years after surgery. The IV fusion mass in the disc space was assessed using the 4-point Sucato scale, where 1 indicates <50% and 4 indicates 100% bony fusion of the disc space. The effects of rod diameter, rod material, graft type, fusion level, and mechanical complications on fusion scores were assessed.

RESULTS

Forty-three patients with right thoracic major curves (mean age 14.9 years) participated in the study. Mean fusion scores for patient subgroups ranged from 1.0 (IV levels with rod fractures) to 2.2 (4.5-mm rod with allograft), with scores tending to decrease with increasing rod size and stiffness. Graft type (autograft vs. allograft) did not affect fusion scores. Fusion scores were highest in the middle levels of the rod construct (mean 2.52), dropping off by 20% to 30% toward the upper and lower extremities of the rod. IV levels where a rod fractured had lower overall mean fusion scores compared to levels without a fracture. Mean total Scoliosis Research Society (SRS) questionnaire scores were 98.9 from a possible total of 120, indicating a good level of patient satisfaction.

CONCLUSIONS

Results suggest that 100% radiologic fusion of the entire disc space is not necessary for successful clinical outcomes following thoracoscopic anterior selective thoracic fusion.

A semiautomatic method to identify vertebral end plate lesions (Schmorl's nodes)

BACKGROUND CONTEXT

There are differences in the definitions of end plate lesions (EPLs), often referred to as Schmorl's nodes, that may, to some extent, account for the large range of reported prevalence (3.8%-76%).

PURPOSE

The purpose of this study was to develop a technique to measure the size, prevalence, and location of EPLs in a consistent manner.

STUDY DESIGN/SETTING

This study proposed a method using a detection algorithm that was applied to five adolescent females (average age, 15.1 [range, 13.0-19.2] years) with idiopathic scoliosis (average major Cobb angle, 60° [range, 55°-67°]).

METHODS

Existing low-dose, computed tomography scans were segmented semiautomatically to extract three-dimensional morphology of each vertebral end plate. Any remaining attachments to the posterior elements of adjacent vertebrae or end plates were then manually sectioned. An automatic algorithm was used to determine the presence and position of EPLs.

RESULTS

End plate lesions were identified in 15 of the 170 (8.8%) end plates analyzed with an average depth of 3.1 mm. Eleven of the 15 EPLs were seen in the lumbar spine. The algorithm was found to be most sensitive to changes in the minimum EPL gradient at the edges of the EPL.

CONCLUSIONS

This study describes an imaging analysis technique for consistent measurement of the prevalence, location, and size of EPLs. The technique can be used to analyze large populations without observer errors in EPL definitions.

The effect of repeated loading and freeze–thaw cycling on immature bovine thoracic motion segment stiffness

There is growing interest in the biomechanics of “fusionless” implant constructs used for deformity correction in the thoracic spine; however, there are questions over the comparability of in vitro biomechanical studies from different research groups due to the various methods used for specimen preparation, testing and data collection. The aim of this study was to identify the effect of two key factors on the stiffness of immature bovine thoracic spine motion segments: (1) repeated cyclic loading and (2) multiple freeze–thaw cycles, to aid in the planning and interpretation of in vitro studies. Two groups of thoracic spine motion segments from 6- to 8-week-old calves were tested in flexion/extension, right/left lateral bending and right/left axial rotation under moment control. Group A was tested with continuous repeated cyclic loading for 500 cycles with data recorded at cycles 3, 5, 10, 25, 50, 100, 200, 300, 400 and 500. Group (B) was tested after each of five freeze–thaw sequences, with data collected from the 10th load cycle in each sequence. Results of testing showed that for Group A: flexion/extension stiffness reduced significantly over the 500 load cycles (−22%; p = 0.001), but there was no significant change between the 5th and 200th load cycles. Lateral bending stiffness decreased significantly (−18%; p = 0.009) over the 500 load cycles, but there was no significant change in axial rotation stiffness ( p = 0.137). Group B: there was no significant difference between mean stiffness over the five freeze–thaw sequences in flexion/extension ( p = 0.813) and a near-significant reduction in mean stiffness in axial rotation (−6%; p = 0.07). However, there was a statistically significant increase in stiffness in lateral bending (+30%; p = 0.007). Study findings indicate that comparison of in vitro testing results for immature thoracic bovine spine segments between studies can be performed with up to 200 load cycles without significant changes in stiffness. However, when testing protocols require greater than 200 cycles, or when repeated freeze–thaw cycles are involved, it is important to account for the effect of cumulative load and freeze–thaw cycles on spine segment stiffness.

Supine to standing Cobb angle change in idiopathic scoliosis: the effect of endplate pre-selection

Background

Supine imaging modalities provide valuable 3D information on scoliotic anatomy, but the altered spine geometry between the supine and standing positions affects the Cobb angle measurement. Previous studies report a mean 7°-10° Cobb angle increase from supine to standing, but none have reported the effect of endplate pre-selection or whether other parameters affect this Cobb angle difference.

Methods

Cobb angles from existing coronal radiographs were compared to those on existing low-dose CT scans taken within three months of the reference radiograph for a group of females with adolescent idiopathic scoliosis. Reformatted coronal CT images were used to measure supine Cobb angles with and without endplate pre-selection (end-plates selected from the radiographs) by two observers on three separate occasions. Inter and intra-observer measurement variability were assessed. Multi-linear regression was used to investigate whether there was a relationship between supine to standing Cobb angle change and eight variables: patient age, mass, standing Cobb angle, Risser sign, ligament laxity, Lenke type, fulcrum flexibility and time delay between radiograph and CT scan.

Results

Fifty-two patients with right thoracic Lenke Type 1 curves and mean age 14.6 years (SD 1.8) were included. The mean Cobb angle on standing radiographs was 51.9° (SD 6.7). The mean Cobb angle on supine CT images without pre-selection of endplates was 41.1° (SD 6.4). The mean Cobb angle on supine CT images with endplate pre-selection was 40.5° (SD 6.6). Pre-selecting vertebral endplates increased the mean Cobb change by 0.6° (SD 2.3, range -9° to 6°). When free to do so, observers chose different levels for the end vertebrae in 39% of cases. Multi-linear regression revealed a statistically significant relationship between supine to standing Cobb change and fulcrum flexibility (p = 0.001), age (p = 0.027) and standing Cobb angle (p < 0.001). The 95% confidence intervals for intra-observer and inter-observer measurement variability were 3.1° and 3.6°, respectively.

Conclusions

Pre-selecting vertebral endplates causes minor changes to the mean supine to standing Cobb change. There is a statistically significant relationship between supine to standing Cobb change and fulcrum flexibility such that this difference can be considered a potential alternative measure of spinal flexibility.

Segmental torso masses in adolescent idiopathic scoliosis

BACKGROUND

Adolescent idiopathic scoliosis is the most common type of spinal deformity whose aetiology remains unclear. Studies suggest that gravitational forces in the standing position play an important role in scoliosis progression, therefore anthropometric data is required to develop biomechanical models of the deformity. Few studies have analysed the trunk by vertebral level and none have performed investigations of the scoliotic trunk. The aim of this study was to determine the centroid, thickness, volume and estimated mass, for sections of the scoliotic trunk.

METHODS

Existing low-dose CT scans were used to estimate vertebral level-by-level torso masses for 20 female adolescent idiopathic scoliosis patients. ImageJ processing software was used to analyse the CT images and enable estimation of the segmental torso mass corresponding to each vertebral level.

FINDINGS

The patients' mean age was 15.0 (SD 2.7) years with mean major Cobb angle of 52 (SD 5.9)° and mean patient weight of 58.2 (SD 11.6) kg. The magnitude of torso segment mass corresponding to each vertebral level increased by 150% from 0.6kg at T1 to 1.5kg at L5. Similarly, segmental thickness from T1-L5 increased inferiorly from a mean 18.5 (SD 2.2) mm at T1 to 32.8 (SD 3.4) mm at L5. The mean total trunk mass, as a percentage of total body mass, was 27.8 (SD 0.5) % which was close to values reported in previous literature.

INTERPRETATION

This study provides new anthropometric reference data on segmental (vertebral level-by-level) torso mass in adolescent idiopathic scoliosis patients, useful for biomechanical models of scoliosis progression and treatment.

Postoperative pain relief using intermittent intrapleural analgesia following thoracoscopic anterior correction for progressive adolescent idiopathic scoliosis

Background

Thoracoscopic anterior scoliosis instrumentation is a safe and viable surgical option for corrective fusion of progressive adolescent idiopathic scoliosis (AIS) and has been performed at our centre on 205 patients since 2000. However, there is a paucity of literature reporting on or examining optimum methods of analgesia following this type of surgery. A retrospective study was designed to present the authors’ technique for delivering intermittent local anaesthetic boluses via an intrapleural catheter following thoracoscopic scoliosis surgery; report the pain levels that may be expected and any adverse effects associated with the use of intrapleural analgesia, as part of a combined postoperative analgesia regime.

Methods

Records for 32 patients who underwent thoracoscopic anterior correction for AIS were reviewed. All patients received an intrapleural catheter inserted during surgery, in addition to patient-controlled opiate analgesia and oral analgesia. After surgery, patients received a bolus of 0.25% bupivacaine every four hours via the intrapleural catheter. Patient’s perceptions of their pain control was measured using the visual analogue pain scale scores which were recorded before and after local anaesthetic administration and the quantity and time of day that any other analgesia was taken, were also recorded.

Results

28 female and four male patients (mean age 14.5 ± 1.5 years) had a total of 230 boluses of local anaesthetic administered in the 96 hour period following surgery. Pain scores significantly decreased following the administration of a bolus (p < 0.0001), with the mean pain score decreasing from 3.66 to 1.83. The quantity of opiates via patient-controlled analgesia after surgery decreased steadily between successive 24 hours intervals after an initial increase in the second 24 hour period when patients were mobilised. One intrapleural catheter required early removal due to leakage; there were no other associated complications with the intermittent intrapleural analgesia method.

Conclusions

Local anaesthetic administration via an intrapleural catheter is a safe and effective method of analgesia following thoracoscopic anterior scoliosis correction. Post-operative pain following anterior thoracic scoliosis surgery can be reduced to ‘mild’ levels by combined analgesia regimes.

An FE investigation simulating intra-operative corrective forces applied to correct scoliosis deformity

Background

Adolescent idiopathic scoliosis (AIS) is a deformity of the spine, which may require surgical correction by attaching a rod to the patient’s spine using screws implanted in the vertebral bodies. Surgeons achieve an intra-operative reduction in the deformity by applying compressive forces across the intervertebral disc spaces while they secure the rod to the vertebra. We were interested to understand how the deformity correction is influenced by increasing magnitudes of surgical corrective forces and what tissue level stresses are predicted at the vertebral endplates due to the surgical correction.

Methods

Patient-specific finite element models of the osseoligamentous spine and ribcage of eight AIS patients who underwent single rod anterior scoliosis surgery were created using pre-operative computed tomography (CT) scans. The surgically altered spine, including titanium rod and vertebral screws, was simulated. The models were analysed using data for intra-operatively measured compressive forces – three load profiles representing the mean and upper and lower standard deviation of this data were analysed. Data for the clinically observed deformity correction (Cobb angle) were compared with the model-predicted correction and the model results investigated to better understand the influence of increased compressive forces on the biomechanics of the instrumented joints.

Results

The predicted corrected Cobb angle for seven of the eight FE models were within the 5° clinical Cobb measurement variability for at least one of the force profiles. The largest portion of overall correction was predicted at or near the apical intervertebral disc for all load profiles. Model predictions for four of the eight patients showed endplate-to-endplate contact was occurring on adjacent endplates of one or more intervertebral disc spaces in the instrumented curve following the surgical loading steps.

Conclusion

This study demonstrated there is a direct relationship between intra-operative joint compressive forces and the degree of deformity correction achieved. The majority of the deformity correction will occur at or in adjacent spinal levels to the apex of the deformity. This study highlighted the importance of the intervertebral disc space anatomy in governing the coronal plane deformity correction and the limit of this correction will be when bone-to-bone contact of the opposing vertebral endplates occurs.

CT and radiographic analysis of sagittal profile changes following thoracoscopic anterior scoliosis surgery

Background

Previous studies report an increase in thoracic kyphosis after anterior approaches and a flattening of sagittal contours following posterior approaches. Difficulties with measuring sagittal parameters on radiographs are avoided with reformatted sagittal CT reconstructions due to the superior endplate clarity afforded by this imaging modality.

Methods

A prospective study of 30 Lenke 1 adolescent idiopathic scoliosis (AIS) patients receiving selective thoracoscopic anterior spinal fusion (TASF) was performed. Participants had ethically approved low dose CT scans at minimum 24 months after surgery in addition to their standard care following surgery. The change in sagittal contours on supine CT was compared to standing radiographic measurements of the same patients and with previous studies. Inter-observer variability was assessed as well as whether hypokyphotic and normokyphotic patient groups responded differently to the thoracoscopic anterior approach.

Results

Mean T5-12 kyphosis Cobb angle increased by 11.8 degrees and lumbar lordosis increased by 5.9 degrees on standing radiographs two years after surgery. By comparison, CT measurements of kyphosis and lordosis increased by 12.3 degrees and 7.0 degrees respectively. 95% confidence intervals for inter-observer variability of sagittal contour measurements on supine CT ranged between 5-8 degrees. TASF had a slightly greater corrective effect on patients who were hypokyphotic before surgery compared with those who were normokyphotic.

Conclusions

Restoration of sagittal profile is an important goal of scoliosis surgery, but reliable measurement with radiographs suffers from poor endplate clarity. TASF significantly improves thoracic kyphosis and lumbar lordosis while preserving proximal and distal junctional alignment in thoracic AIS patients. Supine CT allows greater endplate clarity for sagittal Cobb measurements and linear relationships were found between supine CT and standing radiographic measurements. In this study, improvements in sagittal kyphosis and lordosis following surgery were in agreement with prior anterior surgery studies, and add to the current evidence suggesting that anterior correction is more capable than posterior approaches of addressing the sagittal component of both the instrumented and adjacent non instrumented segments following surgical correction of progressive Lenke 1 idiopathic scoliosis.

Evaluation of the iPhone with an acrylic sleeve versus the Scoliometer for rib hump measurement in scoliosis

Background

Vertebral rotation found in structural scoliosis contributes to trunkal asymmetry which is commonly measured with a simple Scoliometer device on a patient's thorax in the forward flexed position. The new generation of mobile 'smartphones' have an integrated accelerometer, making accurate angle measurement possible, which provides a potentially useful clinical tool for assessing rib hump deformity. This study aimed to compare rib hump angle measurements performed using a Smartphone and traditional Scoliometer on a set of plaster torsos representing the range of torsional deformities seen in clinical practice.

Methods

Nine observers measured the rib hump found on eight plaster torsos moulded from scoliosis patients with both a Scoliometer and an Apple iPhone on separate occasions. Each observer repeated the measurements at least a week after the original measurements, and were blinded to previous results. Intra-observer reliability and inter-observer reliability were analysed using the method of Bland and Altman and 95% confidence intervals were calculated. The Intra-Class Correlation Coefficients (ICC) were calculated for repeated measurements of each of the eight plaster torso moulds by the nine observers.

Results

Mean absolute difference between pairs of iPhone/Scoliometer measurements was 2.1 degrees, with a small (1 degrees) bias toward higher rib hump angles with the iPhone. 95% confidence intervals for intra-observer variability were +/- 1.8 degrees (Scoliometer) and +/- 3.2 degrees (iPhone). 95% confidence intervals for inter-observer variability were +/- 4.9 degrees (iPhone) and +/- 3.8 degrees (Scoliometer). The measurement errors and confidence intervals found were similar to or better than the range of previously published thoracic rib hump measurement studies.

Conclusions

The iPhone is a clinically equivalent rib hump measurement tool to the Scoliometer in spinal deformity patients. The novel use of plaster torsos as rib hump models avoids the variables of patient fatigue and discomfort, inconsistent positioning and deformity progression using human subjects in a single or multiple measurement sessions.

The relationship between deformity correction and clinical outcomes after thoracoscopic scoliosis surgery: a prospective series of one hundred patients

STUDY DESIGN

Prospective clinical case series of 100 patients receiving thoracoscopic anterior scoliosis correction.

OBJECTIVE

To evaluate the relationship between clinical outcomes of thoracoscopic anterior scoliosis surgery and deformity correction, using the Scoliosis Research Society (SRS) outcomes instrument.

SUMMARY OF BACKGROUND DATA

Surgical treatment of scoliosis is quantitatively assessed in the clinic, using radiographic measures of deformity correction and the rib hump, but it is important to understand the extent to which these quantitative measures correlate with self-reported improvements in patients' quality of life after surgery.

METHODS

A series of 100 consecutive adolescent idiopathic scoliosis patients received a single anterior rod via a thoracoscopic approach at the Mater Children's Hospital, Brisbane, Australia. Patients completed SRS outcomes questionnaires before surgery and at 24 months after surgery. Multiple regression and t tests were used to investigate the relationship between SRS scores and deformity correction achieved (radiographic measurements and rib hump) after surgery.

RESULTS

There were 94 females and 6 males with a mean age of 16.1 years. The mean Cobb angle improved from 52° before surgery to 25° after surgery (52%) and the mean rib hump improved from 16° to 8° (51%). The mean total SRS score for the cohort was 99.4/120. None of the deformity-related parameters in the multiple-regression were significant. However, patients with the lowest postoperative major Cobb angles reported significantly higher SRS scores than those with the highest postoperative Cobb angles, but there was no difference on the basis of rib hump correction. There were no significant differences between patients with either rod fractures or screw-related complications compared to those without complications.

CONCLUSION

Patients undergoing thoracoscopic anterior scoliosis correction reported good SRS scores which are comparable with those in previous studies. Postoperative major Cobb angle is a significant predictor of patient satisfaction when comparing subgroups of patients with the highest and lowest postoperative Cobb angles.

Perioperative Aspects of Endoscopic Anterior Scoliosis Surgery: The Learning Curve for a Consecutive Series of 100 Patients

The reported benefits of endoscopic versus open scoliosis surgery include improved visualization, a muscle sparing approach, reduced pulmonary morbidity, reduced pain, and improved cosmesis. Some aspects of the surgical learning curve for this technically demanding method have been previously reported; however, improvements in other factors with increasing experience have not been quantified. This paper presents a series of 100 consecutive endoscopic anterior scoliosis corrections performed between April 2000 and February 2006. We report changes in the following perioperative factors with increasing experience; operative set-up time, operative time, x-ray irradiation time, number of instrumented levels, blood loss, intercostal catheter drainage, chest drain removal time, days in intensive care, days to mobilize, days in hospital, and early complications. Statistical comparisons were made between the first 20 (1 to 20), middle 20 (41 to 60), and last 20 (81 to 100) cases. Results showed statistically significant improvements and increased consistency in operative time, operative set-up time, x-ray irradiation time, blood loss, hospital stay, and mobilization time with experience. The complication rate was comparable to other recently published endoscopic studies. In the last 20 cases of the series, operative times had reduced to 35 minutes per level, x-ray irradiation times to 15 seconds per level, and blood loss to 38 mL per level. Most perioperative surgical factors therefore improve significantly with increasing experience in endoscopic anterior scoliosis correction.

The use of physical biomodelling in complex spinal surgery

Prior studies have suggested that biomodels enhance patient education, preoperative planning and intra-operative stereotaxy; however, the usefulness of biomodels compared to regular imaging modalities such as X-ray, CT and MR has not been quantified. Our objective was to quantify the surgeon's perceptions on the usefulness of biomodels compared to standard visualisation modalities for preoperative planning and intra-operative anatomical reference. Physical biomodels were manufactured for a series of 26 consecutive patients with complex spinal pathologies using a stereolithographic technique based on CT data. The biomodels were used preoperatively for surgical planning and customising implants, and intra-operatively for anatomical reference. Following surgery, a detailed biomodel utility survey was completed by the surgeons, and informal telephone interviews were conducted with patients. Using biomodels, 21 deformity and 5 tumour cases were performed. Surgeons stated that the anatomical details were better visible on the biomodel than on other imaging modalities in 65% of cases, and exclusively visible on the biomodel in 11% of cases. Preoperative use of the biomodel led to a different decision regarding the choice of osteosynthetic materials used in 52% of cases, and the implantation site of osteosynthetic material in 74% of cases. Surgeons reported that the use of biomodels reduced operating time by a mean of 8% in tumour patients and 22% in deformity procedures. This study supports biomodelling as a useful, and sometimes essential tool in the armamentarium of imaging techniques used for complex spinal surgery.

A prospective assessment of SRS-24 scores after endoscopic anterior instrumentation for scoliosis

STUDY DESIGN

Prospective clinical case series.

OBJECTIVE

To evaluate the clinical outcome of anterior endoscopic instrumention for scoliosis using the SRS-24 questionnaire and to examine how these scores change over a 2-year follow-up period.

SUMMARY OF BACKGROUND DATA

Anterior endoscopic instrumentation correction has several advantages compared with open procedures. However, the clinical results of this technique using a validated outcome measure have rarely been reported in the literature.

METHODS

A total of 83 consecutive patients underwent endoscopic anterior instrumentation performed at a single unit. Patients completed the SRS-24 questionnaire before surgery and at 3, 6, 12, and 24 months after surgery. The SRS-24 scores were compared between each of the follow-up intervals.

RESULTS

The pain, general self-image, and function from back condition domains improved after surgery (P < 0.05). Activity level significantly improved between 3 and 6 months, and both function domains improved between 6 and 12 months (P < 0.05). None of the domains increased significantly after 1 year.

CONCLUSIONS

Endoscopic anterior instrumentation for scoliosis significantly improved pain, self-image, and function. The greatest improvement in function occurred between 6 and 12 months after surgery. The SRS-24 scores at 1 year from surgery may provide a good indicator of patient outcome in the long-term.

Recovery of pulmonary function following endoscopic anterior scoliosis correction: evaluation at 3, 6, 12, and 24 months after surgery

STUDY DESIGN

A series of patients with scoliosis undergoing endoscopic anterior instrumentation and fusion undertaking repeated pulmonary function assessments.

OBJECTIVE

To assess recovery of pulmonary function in the 2 years following endoscopic anterior scoliosis correction.

SUMMARY OF BACKGROUND DATA

Recent studies have found that pulmonary function returns to preoperative levels 12-24 months following endoscopic anterior scoliosis correction, and a small improvement in forced expiratory volume (FEV1) has also been reported.

METHODS

A series of 44 patients with endoscopic anterior scoliosis correction had pulmonary function tests before surgery, and at 3, 6, 12, and 24 months after surgery. Forced vital capacity (FVC), FEV1, and total lung capacity (TLC) were measured. Nonparametric statistical analysis was used to investigate changes in pulmonary function between successive assessments.

RESULTS

Pulmonary function decreased by approximately 10% at 3 months after surgery. At 24 months after surgery, FVC and FEV1 recovered to 5% to 8% higher than preoperative levels, while TLC returned to preoperative levels. Statistically significant improvements in most pulmonary function values occurred between 3 and 6, and 6-12 months. Improvements in mean FVC, FEV1, and TLC continue between 12 and 24 months, although only the increase in absolute FVC for this time is statistically significant.

CONCLUSIONS

Endoscopic anterior scoliosis surgery has no lasting negative effect on pulmonary function, and with prolonged follow-up, pulmonary capacity improves beyond preoperative levels.

Variability in Cobb angle measurements using reformatted computerized tomography scans

STUDY DESIGN

Survey of intraobserver and interobserver measurement variability.

OBJECTIVE

To assess the use of reformatted computerized tomography (CT) images for manual measurement of coronal Cobb angles in idiopathic scoliosis.

SUMMARY OF BACKGROUND DATA

Cobb angle measurements in idiopathic scoliosis are traditionally made from standing radiographs, whereas CT is often used for assessment of vertebral rotation. Correlating Cobb angles from standing radiographs with vertebral rotations from supine CT is problematic because the geometry of the spine changes significantly from standing to supine positions, and 2 different imaging methods are involved.

METHODS

We assessed the use of reformatted thoracolumbar CT images for Cobb angle measurement. Preoperative CT of 12 patients with idiopathic scoliosis were used to generate reformatted coronal images. Five observers measured coronal Cobb angles on 3 occasions from each of the images. Intraobserver and interobserver variability associated with Cobb measurement from reformatted CT scans was assessed and compared with previous studies of measurement variability using plain radiographs.

RESULTS

For major curves, 95% confidence intervals for intraobserver and interobserver variability were +/-6.6 degrees and +/-7.7 degrees, respectively. For minor curves, the intervals were +/-7.5 degrees and +/-8.2 degrees, respectively. Intraobserver and interobserver technical error of measurement was 2.4 degrees and 2.7 degrees, with reliability coefficients of 88% and 84%, respectively. There was no correlation between measurement variability and curve severity.

CONCLUSIONS

Reformatted CT images may be used for manual measurement of coronal Cobb angles in idiopathic scoliosis with similar variability to manual measurement of plain radiographs.