Characterization of the mechanical properties of the cortex region of human hair fibers by multiparametric atomic force microscopy mapping

We show the benefit of the use of atomic force microscopy (AFM) in spectroscopy force mode (FV: force volume) for evaluation of the cosmetic active effectiveness in improving the mechanical properties of human hair fibers cortex region. For this, we characterized human hair fibers without and with chemical damage caused by bleaching process. Fiber and resin (embedding material) data were obtained simultaneously in the mapping in order to have the resin data as a reference to ensure a coherent comparison between data from the different fiber groups. Our AFM results, which were evaluated using statistical tests, demonstrated the degradation of fibers after bleaching, corroborating the findings of transmission electron microscopy analysis and the effectiveness of a cosmetic active ingredient in improving the Young's modulus (elastic modulus) (E) of the damaged fibers. We also found a radial decrease in the natural logarithm of Young's modulus ln(E) along the cross-section of the active group fiber, which is compatible with confocal Raman spectroscopy analysis by other authors, demonstrating variation of the active permeation with depth. We note that Young's modulus was also determined by a tensile tester (macro-scale technique), in which it was not possible to obtain statistically significant differences between the groups, evidencing the advantage of the FV-AFM analysis. We also found an increase in ln(E) accompanied by a decrease in maximum adhesion force between tip and sample (negative Pearson correlation coefficient). This result can be explained by the fact that structures composed of hydrophobic components have a higher Young's modulus than structures composed of hydrophilic components.

Role of galectin-3 in the elastic response of radial growth phase melanoma cancer cells

Melanoma is originated from the malignant transformation of the melanocytes and is characterized by a high rate of invasion, the more serious stage compromising deeper layers of the skin and eventually leading to the metastasis. A high mortality due to melanoma lesion persists because most of melanoma lesions are detected in advanced stages, which decreases the chances of survival. The identification of the principal mechanics implicated in the development and progression of melanoma is essential to devise new early diagnosis strategies. Cell mechanics is related with a lot of cellular functions and processes, for instance motility, differentiation, migration and invasion. In particular, the elastic modulus (Young's modulus) is a very explored parameter to describe the cell mechanical properties; most cancer cells reported in the literature smaller elasticity modulus. In this work, we show that the elastic modulus of melanoma cells lacking galectin-3 is significantly lower than those of melanoma cells expressing galectin-3. More interestingly, the gradient of elastic modulus in cells from the nuclear region towards the cell periphery is more pronounced in shGal3 cells. RESEARCH HIGHLIGHTS: AFM imaging and force spectroscopy were used to investigate the morphology and elasticity properties of healthy HaCaT cells and melanoma cells WM1366, with (shSCR) and without (shGal3) expression of galectin-3. It is shown the effect of galectin-3 protein on the elastic properties of cells: the cells without expression of galectin-3 presents lower elastic modulus. By the results, we suggest here that galectin-3 could be used as an effective biomarker of malignancy in both melanoma diagnostic and prognosis.

Determination of the composition and thickness of chromel and alumel thin films on different substrates by quantitative energy dispersive spectroscopy analysis

Thin films of two alloys (chromel and alumel), with thickness less than 100 nm, were obtained by plasma deposition technique, namely filtered cathodic vacuum arc (FCVA). The elemental analyses were performed by quantitative energy dispersive spectroscopy (EDS) microanalysis and Rutherford backscattering spectrometry (RBS). The applicability of EDS to such thin films as these was established by analysis of films deposited on substrates of different atomic numbers, specifically vitreous carbon, silicon, copper, and tin. We found that a substrate with atomic number similar to the mean atomic number of the film constituents is best for reliable EDS results, when compared to RBS. The compatibility between quantitative EDS measurements and RBS measurements, as well as comparison between the thin film elemental composition and the bulk material composition, was assessed by statistical analysis. Good consistency between EDS and RBS measurements was found for both chromel and alumel thin films when copper was used as substrate material. We observed severely overlapping peaks in the RBS output for the case of alumel films so that EDS analysis was crucial. We also compared thickness measurements determined by EDS and RBS, and we found good agreement for the case of alumel film on copper substrate, and 15% agreement for chromel film on copper substrate.

Self-assembled Au and Pt nanoparticles in Poly(methyl methacrylate)

Nanocomposites formed by metal nanoparticles self-assembled in an insulator matrix are of great technological importance. Applications include surface enhanced Raman spectroscopy based biosensors, optical devices, photovoltaic cells, and more. Self-assembling of nanocomposites using low energy ion implantation offers a fast and low cost process. We report here on our work on nanocomposites formed by very low energy ion implantation of gold and platinum nanoparticles into Poly(methyl methacrylate) (PMMA), with description of the nanoparticle evolution as a function of implantation dose. The Au-PMMA and Pt-PMMA nanocomposites were characterized by transmission electron microscopy, thus determining the nanoparticle density, their size distribution, and the distance between particles as a function of implantation dose. A comparison between Au-PMMA and Pt-PMMA reveals substantial differences in the formation processes of the nanoparticles. The results provide insight into basic nanoparticle formation processes, as well as crucial information important for design applications. In addition, the tunneling decay length ξ and the electron affinity ε of the implantation-modified PMMA were obtained using a new and simple approach.

Non-thermal plasma increase bond strength of zirconia to a resin cement

Objective: This study investigated the influence of different surface treatments on zirconia surface energy, roughness and microshear bond strength. Material and Methods: Forty eight slices of Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP- VITA In-Ceram® YZ for inLab®) (6.4 x 3.2 x 1.6 mm) were divided into 3 groups according to the surface treatment (n = 16): YTZP_control -untreated; YTZP_plasma -surface treatment with non-thermal oxygen plasma; YTZP_primer - coating with ceramic primer. Surface energy (n = 6) was measured with a goniometer; and surface roughness (n = 10) was analyzed with a 3D profilometer were performed over zirconia surface. On the same specimens of surface roughness, on the treated zirconia's surface, resin cement (PANAVIA V5 - Kuraray Noritake Dental) was built up by inserting the resin cement into Tygon tubes (1 mm of internal diameter X 1 mm length).  After 24 h storage, microshear test was assessed. Data were analyzed by one-way ANOVA and Tukey post-hoc test (p < 0.05). Results: Non-thermal oxygen plasma treated specimens exhibited higher statistically significant surface energy (p = 0.00) and bond strength (p = 0.00) when compared to control and primer groups. Roughness test (p = 0.897) could not detect statistical difference among the tested groups. Conclusion: Non-thermal oxygen plasma should be a suitable alternative for zirconia surface treatment prior to luting hence it improved microshear bond strength and provided higher surface energy without affecting surface roughness. Keywords                                                                                                   Adhesion; Non-thermal plasma; Surface treatment.

CO2 Laser Glazing Treatment of a Veneering Porcelain: Effects on Porosity, Translucency, and Mechanical Properties

This work tested CO2 laser as a glazing agent and investigated the effects of irradiation on the porosity, translucency, and mechanical properties of veneering porcelain. Sixty discs (diameter 3.5 × 2.0 mm) of veneering porcelain for Y-TZP frameworks (VM9, VITA Zahnfabrik) were sintered and had one of their faces mirror polished. The specimens were divided into six groups (n=10/group) according to surface treatment, as follows: no treatment-control; auto-glaze in furnace following manufacturer's instructions (G); and CO2 laser (45 or 50 W/cm(2)) applied for four or five minutes (L45/4, L45/5, L50/4, L50/5). Optical microscopy (Shimadzu, 100×) was conducted and the images were analyzed with Image J software for the determination of the following porosity parameters: area fraction, average size, and Feret diameter. The translucency parameter studied was masking ability, determined by color difference (ΔE) over black and white backgrounds (CM3370d, Konica Minolta). Microhardness and fracture toughness (indentation fracture) were measured with a Vickers indenter (HMV, Shimadzu). Contact atomic force microscopy (AFM) (50 × 50 μm(2), Nanoscope IIIA, Veeco) was performed at the center of one sample from each group, except in the case of L45/5. With regard to porosity and translucency parameters, auto-glazed and laser-irradiated specimens presented statistical similarity. The area fraction of the surface pores ranged between 2.4% and 5.4% for irradiated specimens. Group L50/5 presented higher microhardness when compared to the G group. The higher (1.1) and lower (0.8) values for fracture toughness (MPa.m(1/2)) were found in laser-irradiated groups (L50/4 and L45/4, respectively). AFM performed after laser treatment revealed changes in porcelain surface profile at a submicrometric scale, with the presence of elongated peaks and deep valleys.

Gold ion implantation into alumina using an "inverted ion source" configuration

We describe an approach to ion implantation in which the plasma and its electronics are held at ground potential and the ion beam is injected into a space held at high negative potential, allowing considerable savings both economically and technologically. We used an "inverted ion implanter" of this kind to carry out implantation of gold into alumina, with Au ion energy 40 keV and dose (3-9) × 10(16) cm(-2). Resistivity was measured in situ as a function of dose and compared with predictions of a model based on percolation theory, in which electron transport in the composite is explained by conduction through a random resistor network formed by Au nanoparticles. Excellent agreement is found between the experimental results and the theory.

Tooth tissue engineering: the influence of hydrophilic surface on nanocrystalline diamond films for human dental stem cells

New techniques for tissue engineering (TE) are rapidly emerging. The basic concept of autologous TE is to isolate cells from small biopsy specimens, and to expand these cells in culture for subsequent seeding onto biodegradable scaffolds. Nanocrystalline diamond films have attracted the attention of researchers from a variety of different areas in recent years, due to their unique and exceptional properties. In this approach, human dental stem cells (hDSCs) were characterized by flow cytometry and grown on diamond films with hydrogen (H)-terminated and oxygen (O)-terminated surfaces for 28 days, and then removed by lysis and washing with distilled water. Energy dispersive spectroscopy analysis was performed, showing that the regions with O-terminated surfaces contained much higher levels of deposited calcium, oxygen, and phosphorus. These results suggest that the extracellular matrix was considerably more developed in the O-terminated regions, as compared with the H-terminated regions. In addition, optical microscopy of hDSCs cultured on the diamond substrate with H- and O-terminated surfaces, before washing with distilled water, showed preferential directions of the cells arrangement, where orthogonal lines suggest that the cells appeared to be following the O-terminated regions or hydrophilic surface. These findings suggest that O-terminated diamond surfaces prepared on biodegradable scaffolds can be useful for mineralized dental tissue formation.

Performance of an inverted ion source

Whereas energetic ion beams are conventionally produced by extracting ions (say, positive ions) from a plasma that is held at high (positive) potential, with ion energy determined by the potential drop through which the ions fall in the beam formation electrode system, in the device described here the plasma and its electronics are held at ground potential and the ion beam is formed and injected energetically into a space maintained at high (negative) potential. We refer to this configuration as an "inverted ion source." This approach allows considerable savings both technologically and economically, rendering feasible some ion beam applications, in particular small-scale ion implantation, that might otherwise not be possible for many researchers and laboratories. We have developed a device of this kind utilizing a metal vapor vacuum arc plasma source, and explored its operation and beam characteristics over a range of parameter variation. The downstream beam current has been measured as a function of extraction voltage (5-35 kV), arc current (50-230 A), metal ion species (Ti, Nb, Au), and extractor grid spacing and beamlet aperture size (3, 4, and 5 mm). The downstream ion beam current as measured by a magnetically-suppressed Faraday cup was up to as high as 600 mA, and with parametric variation quite similar to that found for the more conventional metal vapor vacuum arc ion source.

A high voltage pulse power supply for metal plasma immersion ion implantation and deposition

We describe the design and implementation of a high voltage pulse power supply (pulser) that supports the operation of a repetitively pulsed filtered vacuum arc plasma deposition facility in plasma immersion ion implantation and deposition (Mepiiid) mode. Negative pulses (micropulses) of up to 20 kV in magnitude and 20 A peak current are provided in gated pulse packets (macropulses) over a broad range of possible pulse width and duty cycle. Application of the system consisting of filtered vacuum arc and high voltage pulser is demonstrated by forming diamond-like carbon (DLC) thin films with and without substrate bias provided by the pulser. Significantly enhanced film∕substrate adhesion is observed when the pulser is used to induce interface mixing between the DLC film and the underlying Si substrate.

Small plasma source for materials application

We describe a small hollow-cathode plasma source suitable for small-scale materials synthesis and modification application. The supporting electrical system is minimal. The gaseous plasma source delivers a plasma ion current of up to about 1 mA. Here we outline the source construction and operation, and present some of its basic performance characteristics.

Atomic force microscope nanolithography of polymethylmethacrylate polymer

We describe a nanolithography process for a polymethylmethacrylate (PMMA) surface using scanning contact atomic force microscopy. Parallel furrows were scribed with a pyramidal silicon tip using the same scan mechanism as used to image samples. The PMMA was first electron beam irradiated using a scanning electron microscope and developed. The topography formed is reproducible and predictable. Material from the region where the tip scribes is moved to nearby regions, and aligned, elongated PMMA fragments are seen to decorate the valleys between furrows.

Carbamazepine: a bioequivalence study and limited sampling modeling

OBJECTIVES

To assess the bioequivalence of 2 formulations of carbamazepine and to develop and validate limited sampling strategy (LSS) models for estimating the area under the plasma concentration-time curve (AUC0-infinity) and the peak plasma concentration (Cmax) of carbamazepine.

METHODS

Twenty-four (12 men, 12 women) healthy volunteers received single oral doses (400 mg) of carbamazepine, as reference and test conventional-release formulations, in a standard 2-sequence, 2-period crossover design. Bioequivalence assessment was based on the individual ratios of log-transformed values of AUC0-infinity and Cmax LSS modeling was developed in a training set of 12 randomly assigned volunteers and was validated on the other 12 subjects (validation set).

RESULTS

Carbamazepine AUC0-infinity and Cmax can be accurately predicted (R2 = 0.89 - 0.95, precision = 2.6 - 7.2%) by single-point (72 h) and 2-point LSS models (6, 32 h), respectively. Bioequivalence assessments based on LSS-derived AUC0-infinity and Cmax provided results similar to those obtained using all the concentration-in-plasma data points, and indicated that the 2 formulations are bioequivalent.

CONCLUSION

One-and 2-point LSS models provided accurate estimates of carbamazepine's AUC0-infinity and Cmax, and allowed correct assessment of bioequivalence between the formulations studied.

Effects of caffeine on locomotor activity of horses: determination of the no-effect threshold

Caffeine is the legal stimulant consumed most extensively by the human world population and may be found eventually in the urine and/or blood of race horses. The fact that caffeine is in foods led us to determine the highest no-effect dose (HNED) of caffeine on the spontaneous locomotor activity of horses and then to quantify this substance in urine until it disappeared. We built two behavioural stalls equipped with juxtaposed photoelectric sensors that emit infrared beams that divide the stall into nine sectors in a 'tic-tac-toe' fashion. Each time a beam was interrupted by a leg of the horse, a pulse was generated; the pulses were counted at 5-min intervals and stored by a microcomputer. Environmental effects were minimized by installing exhaust fans producing white noise that obscured outside sounds. One-way observation windows prevented the animals from seeing outside. The sensors were turned on 45 min before drug administration (saline control or caffeine). The animals were observed for up to 8 h after i.v. administration of 2.0, 2.5, 3.0 or 5.0 mg caffeine kg(-1). The HNED of caffeine for stimulation of the spontaneous locomotor activity of horses was 2.0 mg kg(-1). The quantification of caffeine in urine and plasma samples was done by gradient HPLC with UV detection. The no-effect threshold should not be greater than 2.0 microg caffeine ml(-1) plasma or 5.0 microg caffeine ml(-1) urine.

Hydrocortisone concentrations in post-race urine from horses

As hydrocortisone is an endogenous substance, it is first necessary to establish its normal concentrations so as to be able to control its use in racing animals. This study was designed to establish the hydrocortisone concentrations in post-race urine samples of horses racing in Brazil and also to evaluate the results in relation to the international threshold set for this drug. Urine samples were analysed by HPLC-UV. The results were evaluated according to the concentration range as well as sex and time of sample collection (afternoon or evening races). The results showed a high degree of variation in the concentrations of hydrocortisone in the urine (93 +/- 69 ng/ml). The maximum concentration observed was 646 ng/ml, although only a few horses (around 1%) showed levels within the range 500-650 ng/ml, 91% being in the range 0-150 ng/ml. The data suggested a normal distribution curve. Statistical analysis showed no significant influence of sex or time of sample collection.

Immunoaffinity chromatography in the detection of dexamethasone in equine urine

Due to the widespread use of dexamethasone in racing horses, mostly in low doses by intra-articular administration for the treatment of inflammatory processes, a method is developed to detect this drug in horse urine samples using liquid-liquid extraction followed by immunoaffinity chromatography. Liquid chromatography with diode-array detection is used for the identification of the drug. The use of immunoaffinity columns enhances the selectivity of the analysis, and the results show that dexamethasone can be detected up to 28 h after intra-articular administration.

The use of ELISA tests and immunoaffinity chromatography combined with reversed-phase high-performance liquid chromatography for dexamethasone detection in equine urine

Dexamethasone is a corticosteroid drug widely used in racehorses because of its anti-inflammatory effect. It is, therefore, frequently detected in antidoping tests. A method for the antidoping control of dexamethasone in equine urine using screening by ELISA and confirmation by immunoaffinity chromatography combined with reversed-phase high-performance liquid chromatography-diode array detection (HPLC-DAD) is described. The ELISA test is frequently used in antidoping tests for its sensitivity, relative speed, and low cost. The test showed linearity in the range of 4-500 ng/mL of urine, and the intra-assay and interassay imprecision were 9.4 and 9.7%, respectively. The confirmation method showed a limit of detection of 4 ng/mL for dexamethasone. The intra-assay and interassay imprecisions were 10.3 and 14.4%, respectively. The HPLC-DAD showed a limit of detection of 5 ng and linearity in the range of 25-500 ng of dexamethasone. The absolute method recovery was 56.4%. The proposed method detected dexamethasone up to 52 h after administration and proved to be adequate for the antidoping control.

Determination of synthetic estrogens in illegal veterinary formulations by HPTLC and HPLC

To determine the actual amount of diethylstilbestrol, hexestrol, and dienestrol in formulations such as pellets and oily injections that are illegally available on the Brazilian market, a simple methanol extraction is used for the analysis of the pellets and an ether extraction with Sephadex columns (for clean-up) is used for the oily injections. High-performance thin-layer chromatography is used for identification (as a qualitative and semiquantitative method), and high-performance liquid chromatography is used for quantitation. The results of the analysis show that all the formulations are not in accordance with the information listed on their labels.

Determination of phenylbutazone and oxyphenbutazone in plasma and urine samples of horses by high-performance liquid chromatography and gas chromatography-mass spectrometry

A method is described for the qualitative and quantitative determination of phenylbutazone and oxyphenbutazone in horse urine and plasma samples viewing antidoping control. A horse was administered intravenously with 3 g of phenylbutazone. For the qualitative determination, a screening by HPLC was performed after acidic extraction of the urine samples and the confirmation process was realized by GC-MS. Using the proposed method it was possible to detect phenylbutazone and oxyphenbutazone in urine for up to 48 and 120 h, respectively. For the quantitation of these drugs the plasma was deproteinized with acetonitrile and 20 microliters were injected directly into the HPLC system equipped with a UV detector and LiChrospher RP-18 column. The mobile phase used was 0.01 M acetic acid in methanol (45:55, v/v). The limit of detection was 0.5 microgram/ml for phenylbutazone and oxyphenbutazone and the limit of quantitation was 1.0 microgram/ml for both drugs. Using the proposed method it was possible to quantify phenylbutazone up to 30 h and oxyphenbutazone up to 39 h after administration.

Determination of xanthines by high-performance liquid chromatography and thin-layer chromatography in horse urine after ingestion of Guaraná powder

The seeds of Guaraná are rich in xanthines and are used for the preparation of guaraná powder which is very commonly given to horses as a 'tonic' in Brazil. In this paper, the xanthine content of guaraná powder was determined, in addition to its clearance time in horses. Thin-layer chromatography was used as a screening procedure and high-performance liquid chromatography was performed to quantify the drugs in both the powder and urine samples. The guaraná powder was found to contain 2.16, 1.10 and 36.78 mg g-1 of theobromine (TB), theophylline (TP) and caffeine (CF), respectively, and in urine it was possible to detect TB and TP up to 13 d and CF up to 9 d after the administration of guaraná powder.

Determination of succinonitrile in horse urine by gas chromatography-nitrogen-phosphorus detector and gas chromatography-mass spectrometry

A chromatographic method was developed to detect and confirm the presence of succinonitrile (SDN) in horse urine samples, for antidoping control. The urine samples (5 ml) were extracted with diethyl ether and screened by gas chromatography-nitrogen-phosphorus detector and the confirmation of the drug's presence was accomplished by using gas chromatography-mass selective detection. The recovery of extraction was 78 and 81% for 1.0 and 2.0 micrograms ml-1 (relative standard deviation, < 10%), respectively. Urine samples collected after the administration of Energisan were positive for SDN (1-30 h) in all samples analysed.

Influence of furosemide on the detection of flunixin meglumine in horse urine samples

The possibility of false negative results from TLC when a diuretic is administered concomitantly with flunixin was studied. Samples were subjected to solvent extraction from acidic aqueous solutions; duplicate samples were also subjected to alkaline hydrolysis at pH 12.5. The internal standard was flufenamic acid. The quantification of flunixin was performed by HPLC and the results confirmed by GC/MS. The data show that furosemide influences the urinary concentration of flunixin.

[Sickle-cell cardiomegaly in children. Study of 13 cases]

Thirteen children, aged 18 months to 14 years and presenting with sickle cell anemia and cardiomegaly (Cardiothoracic ratio greater than or equal to 0.55) were investigated by echocardiography and radio-isotopic measurement of the cardiac output. Eight children presented with one or several criteria of anemic cardiopathy: left ventricular dilatation and hyperkinesia, increased cardiac index. On the contrary, 2 children presented with left ventricular dilatation and decreased contractility, without increase in the cardiac index; 3 children presented with echocardiographic findings similar to those of controls and a normal cardiac index, which is unusual in cases with chronic anemia. These results show that the cardiovascular system of children with sickle cell anemia does not always behave as one would expect in chronic anemia. They also suggest the possible early occurrence of cardiomyopathy, as already described in adults with sickle cell anemia.