High resolution imaging of soft alginate hydrogels by atomic force microscopy

This work explores the largely unknown surface microstructure and elastic modulus of soft calcium-alginate hydrogels (E = 100-4500 Pa) in their hydrated state by atomic force microscopy (AFM) in quantitative imaging mode. Alginate concentration influenced the surface topography with surface roughness measured to be 101 ± 6 nm and 57 ± 1 nm for 0.5 and 2.0% (w/v) alginate, respectively. The calculated range of pore sizes increased with decreasing alginate concentration, with radii smaller than 360 nm, 570 nm and 1230 nm for 2.0%, 1.0% and 0.5% alginate, respectively. Small changes in calcium concentration (from 20 to 25 mM, 1.5% alginate) did not induce changes in surface microstructure, although it increased the elastic modulus mean values and distribution. Introducing oxidized or peptide-grafted alginate in the gels resulted in rougher surfaces, larger pore sizes and lower elasticity than the respective hydrogels with no modified alginate.

Elucidating bacterial adhesion to mucosal surface by an original AFM approach

Background

Fish skin represents an ancient vertebrate mucosal surface, sharing characteristics with other mucosal surfaces including those of the intestine. The skin mucosa is continuously exposed to microbes in the surrounding water and is therefore important in the first line defense against environmental pathogens by preventing bacteria from accessing the underlying surfaces. Understanding the microbe-host interactions at the fish skin mucosa is highly relevant in order to understand and control infection, commensalism, colonization, persistence, infection, and disease. Here we investigate the interactions between the pathogenic bacteria Aeromonas salmonicida (A. salmonicida) and Yersinia ruckeri (Y. ruckeri), respectively, and the skin mucosal surface of Atlantic salmon fry using AFM force spectroscopy.

Results

The results obtained revealed that when retracting probes functionalized with bacteria from surfaces coated with immobilized mucins, isolated from salmon mucosal surfaces, rupture events reflecting the disruption of adhesive interactions were observed, with rupture strengths centered around 200 pN. However, when retracting probes functionalized with bacteria from the intact mucosal surface of salmon fish fry no adhesive interactions could be detected. Furthermore, rheological measurements revealed a near fluid-like behavior for the fish fry skin mucus. Taken together, the experimental data indicate that the adhesion between the mucin molecules within the mucous layer may be significantly weaker than the interaction between the bacteria and the mucin molecules. The bacteria, immobilized on the AFM probe, do bind to individual mucins in the mucosal layer, but are released from the near fluid mucus with little resistance upon retraction of the AFM probe, to which they are immobilized.

Conclusion

The data provided in the current paper reveal that A. salmonicida and Y. ruckeri do bind to the immobilized mucins. However, when retracting the bacteria from intact mucosal surfaces, no adhesive interactions are detected. These observations suggest a mechanism underlying the protective function of the mucosal surface based on the clearing of potential threats by adhering them to loosely attached mucus that is subsequently released from the fish skin.

A Titratable Cell Lysis-on-Demand System for Droplet-Compartmentalized Ultrahigh-Throughput Screening in Functional Metagenomics and Directed Evolution

Water-in-oil emulsion droplets are an attractive format for ultrahigh-throughput screening in functional metagenomics and directed evolution applications that allow libraries with more than 10⁷ members to be characterized in a day. Single library members are compartmentalized in droplets that are generated in microfluidic devices and tested for the presence of target biocatalysts. The target proteins can be produced intracellularly, for example, in bacterial hosts in-droplet cell lysis is therefore necessary to allow the enzymes to encounter the substrate to initiate an activity assay. Here, we present a titratable lysis-on-demand (LoD) system enabling the control of the cell lysis rate in Escherichia coli. We demonstrate that the rate of cell lysis can be controlled by adjusting the externally added inducer concentration. This LoD system is evaluated both at the population level (by optical density measurements) and at the single-cell level (on single-cell arrays and in alginate microbeads). Additionally, we validate the LoD system by droplet screening of a phosphotriesterase expressed from E. coli, with cell lysis triggered by inducer concentrations in the μM range. The LoD system yields sufficient release of the intracellularly produced enzymes to bring about a detectable quantity of product (measured by fluorescence in flow cytometry of double emulsions), while leaving viable cells for the downstream recovery of the genetic material.

Insights into the roles of charged residues in substrate binding and mode of action of mannuronan C-5 epimerase AlgE4

Mannuronan C-5 epimerases catalyse the epimerization of monomer residues in the polysaccharide alginate, changing the physical properties of the biopolymer. The enzymes are utilized to tailor alginate to numerous biological functions by alginate-producing organisms. The underlying molecular mechanisms that control the processive movement of the epimerase along the substrate chain is still elusive. To study this, we have used an interdisciplinary approach combining molecular dynamics simulations with experimental methods from mutant studies of AlgE4, where initial epimerase activity and product formation were addressed with NMR spectroscopy, and characteristics of enzyme-substrate interactions were obtained with isothermal titration calorimetry and optical tweezers. Positive charges lining the substrate-binding groove of AlgE4 appear to control the initial binding of poly-mannuronate, and binding also seems to be mediated by both electrostatic and hydrophobic interactions. After the catalytic reaction, negatively charged enzyme residues might facilitate dissociation of alginate from the positive residues, working like electrostatic switches, allowing the substrate to translocate in the binding groove. Molecular simulations show translocation increments of two monosaccharide units before the next productive binding event resulting in MG-block formation, with the epimerase moving with its N-terminus towards the reducing end of the alginate chain. Our results indicate that the charge pair R343-D345 might be directly involved in conformational changes of a loop that can be important for binding and dissociation. The computational and experimental approaches used in this study complement each other, allowing for a better understanding of individual residues' roles in binding and movement along the alginate chains.

Exploring the effects of approach velocity on depletion force and coalescence in oil-in-water emulsions

An emulsion is a thermodynamically unstable system consisting of at least two immiscible liquid phases, one of which is dispersed in the other in the form of droplets of varying size. Most studies on emulsions have focused on the behaviour of emulsion droplets with diameter from ∼50 μm and upwards. However, the properties of smaller droplets may be highly relevant in order to understand the behaviour of emulsions, including their performance in numerous applications within the fields of food, industry, and medical science. The relatively long life-time and small size of these droplets compared to other emulsion droplets, make them suited for optical trapping and micromanipulation technologies. Optical tweezers have previously shown potential in the study of stabilized emulsions. Here we employ optical tweezers to examine unstable oil-in-water emulsions to determine the effects of system parameters on depletion force and coalescence times.

Tn and STn are members of a family of carbohydrate tumor antigens that possess carbohydrate-carbohydrate interactions

The mucin-type O-glycome in cancer aberrantly expresses the truncated glycans Tn (GalNAcα1-Ser/Thr) and STn (Neu5Acα2,6GalNAcα1-Ser/Thr). However, the role of Tn and STn in cancer and other diseases is not well understood. Our recent discovery of the self-binding properties (carbohydrate-carbohydrate interactions, CCIs) of Tn (Tn-Tn) and STn (STn-STn) provides a model for their possible roles in cellular transformation. We also review evidence that Tn and STn are members of a larger family of glycan tumor antigens that possess CCIs, which may participate in oncogenesis.

The Role of Glycans in Bacterial Adhesion to Mucosal Surfaces: How Can Single-Molecule Techniques Advance Our Understanding?

Bacterial adhesion is currently the subject of increased interest from the research community, leading to fast progress in our understanding of this complex phenomenon. Resent research within this field has documented the important roles played by glycans for bacterial surface adhesion, either through interaction with lectins or with other glycans. In parallel with this increased interest for and understanding of bacterial adhesion, there has been a growth in the sophistication and use of sensitive force probes for single-molecule and single cell studies. In this review, we highlight how the sensitive force probes atomic force microscopy (AFM) and optical tweezers (OT) have contributed to clarifying the mechanisms underlying bacterial adhesion to glycosylated surfaces in general and mucosal surfaces in particular. We also describe research areas where these techniques have not yet been applied, but where their capabilities appear appropriate to advance our understanding.

Interactions between the breast cancer-associated MUC1 mucins and C-type lectin characterized by optical tweezers

Carbohydrate–protein interactions govern many crucial processes in biological systems including cell recognition events. We have used the sensitive force probe optical tweezers to quantify the interactions occurring between MGL lectins and MUC1 carrying the cancer-associated glycan antigens mucins Tn and STn. Unbinding forces of 7.6±1.1 pN and 7.1±1.1 pN were determined for the MUC1(Tn)—MGL and MUC1(STn)—MGL interactions, at a force loading rate of ~40 pN/s. The interaction strength increased with increasing force loading rate, to 27.1±4.4 and 36.9±3.6 pN at a force loading rate of ~ 310 pN/s. No interactions were detected between MGL and MUC1(ST), a glycoform of MUC1 also expressed by breast carcinoma cells. Interestingly, this glycan (ST) can be found on proteins expressed by normal cells, although in this case not on MUC1. Additionally, GalNAc decorated polyethylene glycol displayed similar rupture forces as observed for MUC1(Tn) and MUC1(STn) when forced to unbind from MGL, indicating that GalNAc is an essential group in these interactions. Since the STn glycan decoration is more frequently found on the surface of carcinomas than the Tn glycan, the binding of MUC1 carrying STn to MGL may be more physiologically relevant and may be in part responsible for some of the characteristics of STn expressing tumours.

Interactions of mucins with the Tn or Sialyl Tn cancer antigens including MUC1 are due to GalNAc-GalNAc interactions

The molecular mechanism(s) underlying the enhanced self-interactions of mucins possessing the Tn (GalNAcα1-Ser/Thr) or STn (NeuNAcα2-6GalNAcα1-Ser/Thr) cancer markers were investigated using optical tweezers (OT). The mucins examined included modified porcine submaxillary mucin containing the Tn epitope (Tn-PSM), ovine submaxillary mucin with the STn epitope (STn-OSM), and recombinant MUC1 analogs with either the Tn and STn epitope. OT experiments in which the mucins were immobilized onto polystyrene beads revealed identical self-interaction characteristics for all mucins. Identical binding strength and energy landscape characteristics were also observed for synthetic polymers displaying multiple GalNAc decorations. Polystyrene beads without immobilized mucins showed no self-interactions and also no interactions with mucin-decorated polystyrene beads. Taken together, the experimental data suggest that in these molecules, the GalNAc residue mediates interactions independent of the anchoring polymer backbone. Furthermore, GalNAc-GalNAc interactions appear to be responsible for self-interactions of mucins decorated with the STn epitope. Hence, Tn-MUC1 and STn-MUC1 undergo self-interactions mediated by the GalNAc residue in both epitopes, suggesting a possible molecular role in cancer. MUC1 possessing the T (Galβ1-3GalNAcα1-Ser/Thr) or ST antigen (NeuNAcα2-3Galβ1-3GalNAcα1-Ser/Thr) failed to show self-interactions. However, in the case of ST-MUC1, self-interactions were observed after subsequent treatment with neuraminidase and β-galactosidase. This enzymatic treatment is expected to introduce Tn-epitopes and these observations thus further strengthen the conclusion that the observed interactions are mediated by the GalNAc groups.

Heterogeneity in GFP expression in isogenic populations of P. putida KT2440 investigated using flow cytometry and bacterial microarrays

Fluorescence intensities were determined using both flow cytometry and bacterial microarrays for Pseudomonas putida expressing GFP upon addition of an inducer. Fluorescence micrographs revealed static inter-cell differences in fluorescence emission.

Microarrays for the study of compartmentalized microorganisms in alginate microbeads and (W/O/W) double emulsions

Here, we present two array platforms for small (50–100 μm) cell-containing 3D compartments prepared by droplet-based microfluidics.

Energy Landscape of Alginate-Epimerase Interactions Assessed by Optical Tweezers and Atomic Force Microscopy

Mannuronan C-5 epimerases are a family of enzymes that catalyze epimerization of alginates at the polymer level. This group of enzymes thus enables the tailor-making of various alginate residue sequences to attain various functional properties, e.g. viscosity, gelation and ion binding. Here, the interactions between epimerases AlgE4 and AlgE6 and alginate substrates as well as epimerization products were determined. The interactions of the various epimerase–polysaccharide pairs were determined over an extended range of force loading rates by the combined use of optical tweezers and atomic force microscopy. When studying systems that in nature are not subjected to external forces the access to observations obtained at low loading rates, as provided by optical tweezers, is a great advantage since the low loading rate region for these systems reflect the properties of the rate limiting energy barrier. The AlgE epimerases have a modular structure comprising both A and R modules, and the role of each of these modules in the epimerization process were examined through studies of the A- module of AlgE6, AlgE6A. Dynamic strength spectra obtained through combination of atomic force microscopy and the optical tweezers revealed the existence of two energy barriers in the alginate-epimerase complexes, of which one was not revealed in previous AFM based studies of these complexes. Furthermore, based on these spectra estimates of the locations of energy transition states (x_β), lifetimes in the absence of external perturbation (τ⁰) and free energies (ΔG^#) were determined for the different epimerase–alginate complexes. This is the first determination of ΔG^# for these complexes. The values determined were up to 8 k_BT for the outer barrier, and smaller values for the inner barriers. The size of the free energies determined are consistent with the interpretation that the enzyme and substrate are thus not tightly locked at all times but are able to relocate. Together with the observed different affinities determined for AlgE4-polymannuronic acid (poly-M) and AlgE4-polyalternating alginate (poly-MG) macromolecular pairs these data give important contribution to the growing understanding of the mechanisms underlying the processive mode of these enzymes.

The Design of Simple Bacterial Microarrays: Development towards Immobilizing Single Living Bacteria on Predefined Micro-Sized Spots on Patterned Surfaces

In this paper we demonstrate a procedure for preparing bacterial arrays that is fast, easy, and applicable in a standard molecular biology laboratory. Microcontact printing is used to deposit chemicals promoting bacterial adherence in predefined positions on glass surfaces coated with polymers known for their resistance to bacterial adhesion. Highly ordered arrays of immobilized bacteria were obtained using microcontact printed islands of polydopamine (PD) on glass surfaces coated with the antiadhesive polymer polyethylene glycol (PEG). On such PEG-coated glass surfaces, bacteria were attached to 97 to 100% of the PD islands, 21 to 62% of which were occupied by a single bacterium. A viability test revealed that 99% of the bacteria were alive following immobilization onto patterned surfaces. Time series imaging of bacteria on such arrays revealed that the attached bacteria both divided and expressed green fluorescent protein, both of which indicates that this method of patterning of bacteria is a suitable method for single-cell analysis.

The Breast Cancer-Associated Glycoforms of MUC1, MUC1-Tn and sialyl-Tn, Are Expressed in COSMC Wild-Type Cells and Bind the C-Type Lectin MGL

Aberrant glycosylation occurs in the majority of human cancers and changes in mucin-type O-glycosylation are key events that play a role in the induction of invasion and metastases. These changes generate novel cancer-specific glyco-antigens that can interact with cells of the immune system through carbohydrate binding lectins. Two glyco-epitopes that are found expressed by many carcinomas are Tn (GalNAc-Ser/Thr) and STn (NeuAcα2,6GalNAc-Ser/Thr). These glycans can be carried on many mucin-type glycoproteins including MUC1. We show that the majority of breast cancers carry Tn within the same cell and in close proximity to extended glycan T (Galβ1,3GalNAc) the addition of Gal to the GalNAc being catalysed by the T synthase. The presence of active T synthase suggests that loss of the private chaperone for T synthase, COSMC, does not explain the expression of Tn and STn in breast cancer cells. We show that MUC1 carrying both Tn or STn can bind to the C-type lectin MGL and using atomic force microscopy show that they bind to MGL with a similar dead adhesion force. Tumour associated STn is associated with poor prognosis and resistance to chemotherapy in breast carcinomas, inhibition of DC maturation, DC apoptosis and inhibition of NK activity. As engagement of MGL in the absence of TLR triggering may lead to anergy, the binding of MUC1-STn to MGL may be in part responsible for some of the characteristics of STn expressing tumours.

Single molecule study of heterotypic interactions between mucins possessing the Tn cancer antigen

Mucins are linear, heavily O-glycosylated proteins with physiological roles that include cell signaling, cell adhesion, inflammation, immune response and tumorgenesis. Cancer-associated mucins often differ from normal mucins by presenting truncated carbohydrate chains. Characterization of the binding properties of mucins with truncated carbohydrate side chains could thus prove relevant for understanding their role in cancer mechanisms such as metastasis and recognition by the immune system. In this work, heterotypic interactions of model mucins that possess the Tn (GalNAcαThr/Ser) and T (Galβ1-3GalNAcαThr/Ser) cancer antigens derived from porcine submaxillary mucin (PSM) were studied using atomic force microscopy. PSM possessing only the Tn antigen (Tn-PSM) was found to bind to PSM analogs possessing a combination of T, Tn and STn antigens as well as biosynthetic analogs of the core 1 blood group A tetrasaccharide (GalNAcα1-3[Fucα1-2] Galβ1-3GalNAcαSer/Thr). The rupture forces for the heterotypic interactions ranged from 18- to 31 pN at a force-loading rate of ∼0.5 nN/s. The thermally averaged distance from the bound complex to the transition state (xβ) was estimated to be in the range 0.37-0.87 nm for the first barrier of the Bell Evans analysis and within 0.34-0.64 nm based on a lifetime analysis. These findings reveal that the binding strength and energy landscape for heterotypic interactions of Tn-PSM with the above mucins, resemble homotypic interactions of Tn-PSM. This suggests common carbohydrate epitope interactions for the Tn cancer antigen with the above mucin analogs, a finding that may be important to the role of the Tn antigen in cancer cells.

Stability and interaction forces of oil-in-water emulsions as observed by optical tweezers – a proof-of-concept study

This proof-of-concept study documents the suitability of optical tweezers in studies aiming at revealing the forces acting between emulsion droplets.

Enhanced self-association of mucins possessing the T and Tn carbohydrate cancer antigens at the single-molecule level

Mucins are linear O-glycosylated glycoproteins involved in inflammation, cell adhesion, and tumorigenesis. Cancer-associated mucins often possess increased expression of the T (Galβ1,3GalNAcαThr/Ser) and Tn (GalNAcαThr/Ser) cancer antigens, which are diagnostic markers for several cancers, including colon cancer. We have used AFM based single-molecule forced unbinding under near physiological conditions to investigate the self-interactions between porcine submaxillary mucin (PSM) as well as between PSM analogs possessing various carbohydrates including the T- and Tn-antigen. Distributions of unbinding forces and corresponding force loading rates were determined for force loading rates from 0.18 nN/s to 39 nN/s, and processed to yield most probable unbinding forces f* and lifetimes of the interactions. Parameter f* varied in the range 27 to 50 pN at force loading rates of about 2 nN/s among the various mucins. All mucin samples investigated showed self-interaction, but the tendency was greatest for PSM displaying only the Tn-antigen (Tn-PSM) or a mixture of Tn-, T-antigen, and the trisaccharide Fucα1,2Galβ1,3GalNAc (Tri-PSM). Weaker self-interactions were observed for native PSM (Fd-PSM), which consists of a nearly equal mixture of the longer core 1 blood group A tetrasaccharide (GalNAcα1,3(Fucα1,2)Galβ1,3GalNAcαSer/Thr) and Tn-antigen. The data are consistent with the truncated Tn and T glycans enhancing self-interaction of the mucins. These carbohydrate cancer antigens may, thus, play an active role in the disease by constitutively activating mucin and mucin-type receptors by self-association on cells.

Responsive hydrogels for label-free signal transduction within biosensors

Hydrogels have found wide application in biosensors due to their versatile nature. This family of materials is applied in biosensing either to increase the loading capacity compared to two-dimensional surfaces, or to support biospecific hydrogel swelling occurring subsequent to specific recognition of an analyte. This review focuses on various principles underpinning the design of biospecific hydrogels acting through various molecular mechanisms in transducing the recognition event of label-free analytes. Towards this end, we describe several promising hydrogel systems that when combined with the appropriate readout platform and quantitative approach could lead to future real-life applications.

Single-molecule pair studies of the interactions of the alpha-GalNAc (Tn-antigen) form of porcine submaxillary mucin with soybean agglutinin

Mucins form a group of heavily O-glycosylated biologically important glycoproteins that are involved in a variety of biological functions, including modulating immune response, inflammation, and adhesion. Mucins are also involved in cancer and metastasis and often express diagnostic cancer antigens. Recently, a modified porcine submaxillary mucin (Tn-PSM) containing GalNAcalpha1-O-Ser/Thr residues was shown to bind to soybean agglutinin (SBA) with approximately 10(6)-fold enhanced affinity relative to GalNAcalpha1-O-Ser, the pancarcinoma carbohydrate antigen. In this study, dynamic force spectroscopy is used to investigate molecular pairs of SBA and Tn-PSM. A number of force jumps that demonstrate unbinding or rebinding events were observed up to a distance equal to 2.0 microm, consistent with the length of the mucin chain. The unbinding force increased from 103 to 402 pN with increasing force loading rate. The position of the activation barrier in the energy landscape of the interaction was 0.1 nm. The lifetime of the SBA-TnPSM complex in the absence of applied force was determined to be in the range 1.3-1.9 s. Kinetic parameters describing the rate of dissociation of other sugar lectin interactions are in the range 3.3 x 10(-3)-2.5 x 10(-3) s. The long lifetime of the SBA-TnPSM complex is compatible with a binding model in which lectin molecules "bind and jump" from alpha-GalNAc residue to alpha-GalNAc residue along the polypeptide chain of Tn-PSM before dissociating. These findings have important implications for the molecular recognition properties of mucins.

Single molecular pair interactions between hydrophobically modified hydroxyethyl cellulose and amylose determined by dynamic force spectroscopy

Interactions among HMHEC (hydrophobically modified hydroxyethyl cellulose) and between HMHEC and amylose were investigated by means of dynamic force spectroscopy of single molecular pairs. The technique was realized using a scanning probe based platform, and the molecular pair interactions were investigated in aqueous solutions over a range of force loading rates. Both hydrophobic interactions among hydrophobe C(16) alkyl side chains in HMHEC and association between these hydrophobes in HMHEC and amylose showed a stretching type peak. The distribution analysis of rupture force based on Bell-Evans's model revealed that the peaks had a most probable rupture force ranging from 27 pN at a force loading rate r(f) = 0.43 nN/s to 125 pN at r(f) = 170 nN/s for HMHEC-HMHEC, and from 13 pN at r(f) = 0.20 nN/s to 34 pN at r(f) = 33.7 nN/s for HMHEC-amylose interactions. The distance of the energy barrier relative to the minimum, x(beta), and the apparent lifetime in the absence of external force, tau, were found to depend on the force loading rate, and the average values are estimated to be 0.99 nm and 0.89s for HMHEC-HMHEC and 0.31 nm and 0.075s for HMHEC-amylose interactions. The obtained data for these pairwise molecular interactions are underpinning the associative behavior of the macroscopic properties of aqueous solutions of these polysaccharides.

Higher order structure of (1,3)-beta-D-glucans and its influence on their biological activities and complexation abilities

(1,3)-beta-D-Glucans form a group of biologically active biopolymers that exist in different structural organizations depending on the environmental conditions. The biological effect of (1,3)-beta-D-glucans is a core issue stimulating large research efforts of the molecular properties and their consequences for action as biological response modifiers. The fascination for these molecules increased further following the finding of their ability to form complexes of defined geometry with a number of structures, ranging from linear architectures as polymers or carbon nanotubes, to globular structures as gold particles or dye molecules. The fascinating information concerning the relationship between sample treatment history and molecular organization has not yet reached out to all the contributors within the field, resulting in unnecessary apparent inconsistencies in the literature. In addition to environmental conditions, the sample history is known to influence on the precise structural organization of these molecules. The present knowledge related to the structure of native as well as denatured, renatured and annealed (1,3)-beta-D-glucans is reviewed. The influence of their structural organization on the biological activity and complexation abilities is discussed, and some factors hindering progress in the understanding of their biological effects or complexation abilities are pointed out.

Potentiation of histamine release by Microfungal (1-->3)- and (1-->6)-beta-D-glucans

(1-->3)-beta-D-Glucans, a cell wall component in most microfungi, are suggested to play a role in the development of respiratory and general symptoms in organic dust-related diseases. The mechanisms by which they induce these effects are, however, not clear. In the present study, mediator release and its potentiation by the (1-->3)-beta-D-glucan as well as by the (1-->6)-beta-D-glucan found in yeast and other fungi were therefore examined. Blood leucocytes from healthy volunteers and from patients allergic to house dust mite were incubated with (1-->3)-beta-D-glucans with increasing 1,6-branchings: curdlan [a linear (1-->3)-beta-D-glucan], laminarin and scleroglucan, and furthermore with pustulan, a linear (1-->6)-beta-D-glucan. Histamine release was not observed on exposure to the glucans only, but in the presence of anti-immunoglobulin E (IgE) antibody or specific antigens, all the glucans investigated led to an enhancement of the IgE-mediated histamine release. The glucans induced a significant potentiation of the mediator release when present at concentrations in the range of 2-5 x 10(-5) M. These results suggest that (1-->3)-beta-D-glucan as well as (1-->6)-beta-D-glucan aggravates IgE-mediated histamine release. Knowledge concerning the effects of glucans on immune responses may be of importance for understanding and treating inflammatory and allergic diseases.

Influence of Oligoguluronates on Alginate Gelation, Kinetics, and Polymer Organization

Structural polysaccharides of the alginate family form gels in aqueous Ca2+-containing solutions by lateral association of chain segments. The effect of adding oligomers of alpha-l-guluronic acid (G blocks) to gelling solutions of alginate was investigated using rheology and atomic force microscopy (AFM). Ca-alginate gels were prepared by in situ release of Ca2+. The gel strength increased with increasing level of calcium saturation of the alginate and decreased with increasing amount of free G blocks. The presence of free G blocks also led to an increased gelation time. The gel point and fractal dimensionalities of the gels were determined based on the rheological characterization. Without added free G blocks the fractal dimension of the gels increased from df = 2.14 to df = 2.46 when increasing [Ca2+] from 10 to 20 mM. This increase was suggested to arise from an increased junction zone multiplicity induced by the increased concentration of calcium ions. In the presence of free G blocks (G block/alginate = 1/1) the fractal dimension increased from 2.14 to 2.29 at 10 mM Ca2+, whereas there was no significant change associated with addition of G blocks at 20 mM Ca2+. These observations indicate that free G blocks are involved in calcium-mediated bonds formed between guluronic acid sequences within the polymeric alginates. Thus, the added oligoguluronate competes with the alginate chains for the calcium ions. The gels and pregel situations close to the gel point were also studied using AFM. The AFM topographs indicated that in situations of low calcium saturation microgels a few hundred nanometers in diameter develop in solution. In situations of higher calcium saturation lateral association of a number of alginate chains are occurring, giving ordered fiber-like structures. These results show that G blocks can be used as modulators of gelation kinetics as well as local network structure formation and equilibrium properties in alginate gels.

Small angle x-ray scattering study of local structure and collapse transition of (1,3)-β-D-glucan-chitosan gels

Scleroglucan is a (1,3)-beta-D-glucan polysaccharide produced by the fungus Sclerotium. Dissolved in water at room temperature it adopts a linear, rigid, triple helical structure. Gelation of scleroglucan can be obtained by Schiff-base formation between partly periodate oxidized scleroglucan and the primary amine groups of chitosan. The scleraldehyde-chitosan gels exhibit a collapse transition when exposed to volume fractions of isopropanol, Wp, larger than 65%. The aim of the present study is to provide structural information concerning the local polymer distribution and the collapse transition in (1,3)-beta-D-glucan-chitosan gels. Small angle x-ray scattering was used to investigate solutions and gels of scleroglucan in water, as well as in an aqueous mixture containing 65% isopropanol. The results reveal that in aqueous solution, the polysaccharide scleroglucan chains have an approximately cylindrical cross section of external diameter close to 17 A. The gels display the same local structure, but form clusters on a longer distance scale. For the collapsed gels in the water-isopropanol mixture, partial phase separation occurs in which ordered domains of approximate size of 110 A develop. This study indicates that local ordering in liquid-crystalline-type domains is a possible molecular mechanism contributing to the collapse of gels composed of semiflexible polymers. The triple helical structure of the molecule appears not to be conserved in the majority phase in this solvent, but it is conserved in the liquid crystalline domains.

Determination of Molecular Parameters of Linear and Circular Scleroglucan Coexisting in Ternary Mixtures Using Light Scattering

A combination of static and dynamic light scattering (SLS and DLS) is applied here to determine molecular parameters for coexisting linear and circular scleroglucan polymers of similar molecular weights, dissolved in water, that is, forming a ternary system. The weight-average molecular weights, M(w), were determined to be 3.2 x 10(5) and 3.9 x 10(5) g/mol for the circular and linear molecules, respectively, whereas the z-average radius of gyration, R(g), was found to be equal to 41 nm for the circular molecules and 136 nm for the linear ones. These values are within a physically reasonable range in view of the heterogeneity of the samples. This study confirms that decomposition of total scattering intensities deduced from the dynamic properties can be used to determine molecular parameters of populations of molecules of equal M(w) but different morphologies present in ternary mixtures.

Mapping enzymatic functionalities of mannuronan C-5 epimerases and their modular units by dynamic force spectroscopy

Alginates are (1-->4)-linked structural copolyuronans consisting of beta-D-mannuronic acid (M) and its C-5 epimer alpha-L-guluronic acid (G). The residue sequence variation is introduced in a unique postpolymerisation step catalysed by a family of C-5 epimerases named AlgE enzymes. The seven known AlgE's are composed of two modules, designated A and R, present in different number. The molecular details of the structure-function relationship of these seven epimerases, introducing specific residue sequences, are not understood. In this study, single-molecular pair interactions between alginate and AlgE enzymes were investigated using dynamic force spectroscopy. The AlgE enzymes AlgE4 and AlgE6, the recombinant construct PKA1 composed of A- and R-modules from various AlgE's, as well as separate R- and A-modules were studied. The strength of the protein-mannuronan interaction, when applying a loading rate of 0.6 nN/s, varied from 73 pN (AlgE4) to 144 pN (A-module). The determined potential width, that is, the distance from the activation barrier to the bound substrate molecule, was 0.23 nm for AlgE4, 0.19 nm for AlgE6 and 0.1 nm for the A-module. No attraction was observed between the R-module and the substrate. The observations indicate that the A-module contains the substrate binding site and that the R-module modulates the enzyme-substrate binding strength. The observed AlgE4-polymer residence times, two orders of magnitude longer than expected from kcat reported for AlgE4, not observed for PKA1, led us to propose a processive mode of action of AlgE4.

Structural properties of poly C-scleroglucan complexes

Successive changes of solvent conditions can be used to dissociate and reassociate the triple-helical structure of (1,3)-beta-D-glucans. Ultramicroscopic techniques have revealed a blend of circular and other structures following renaturation. When this solvent exchange process is carried out in the presence of certain polynucleotides, the process creates a novel macromolecular complex. Here, we use size exclusion chromatography (SEC) to study such (1,3)-beta-D-glucan-polynucleotide complexes. Online multi-angle laser-light scattering (MALLS) and refractive index (RI) detectors allowed determination of molecular weight and radius of gyration of the molecules. An ultraviolet (UV) detector allowed specific detection of the polynucleotide. The poly-cytidylic acid (poly C) shifted to coelution with the linear fraction of the scleroglucan following the renaturation of poly C-scleroglucan blends, indicating that poly C is incorporated in linear, but not in circular, structures of scleroglucan. This conclusion was consistent with AFM topographs that revealed a decreased fraction of circular structures upon addition of poly C during the renaturation process. The combined information about radius of gyration (R(g)) and molecular weight (M(w)) allowed us to conclude that the poly C-scleroglucan complexes are more dense and have a higher persistence length than linear scleroglucan triple helixes. The experimentally determined mass per unit length was used as a basis for elucidating possible molecular arrangements within the poly C-scleroglucan complex.

Probing macromolecular architectures of nanosized cyclic structures of (1→3)-β-d-glucans by AFM and SEC-MALLS

Comb-like branched (1-->3)-beta-D-glucans dissolve in water as stiff triple-helical structures. Dissociation followed by re-association leads to the formation of a blend of various macromolecular topologies, where the cyclic species make up a significant fraction. In this study, the molecular properties of these nanosized cyclic structures of (1-->3)-beta-D-glucans were probed using a combination of AFM and SEC-MALLS. The cyclic structures were obtained by subjecting linear triple-helical molecules of (1-->3)-beta-D-glucans to a denaturation-renaturation cycle, and the fraction of cyclic structures in the renatured sample was determined by AFM. Samples containing different known fractions of linear and circular molecules were studied by SEC with online multi-angle laser-light scattering and viscometric detectors. The molecular weight and the radius of gyration of the molecules eluting from the SEC column, as well as the concentration and the intrinsic viscosity, were determined simultaneously. By extrapolating the results to a situation of only circular species, the results allowed to determine the linear mass per unit length (M(L)) of not only the linear but also the circular morphologies of the (1-->3)-beta-D-glucans. The values obtained were M(L)=2140+/-180 g mol(-1)nm(-1) for the circular species and 2045+/-80 g mol(-1)nm(-1) for the linear species. This is the first direct determination of the M(L) parameter of the circular topology, and the results indicate that the reassociation of the individual chains yield a triplex structure also for the circular morphology, similar to the initial triple helix.

Characterisation of bacterial polysaccharides: steps towards single-molecular studies

Techniques used in studies of polysaccharides, including chemical composition, linkage pattern, and higher order structures are in constant development. They provide information necessary for understanding of the polysaccharide properties and functions. Here, recent advancements in studies of the polysaccharides at the single-molecule level are highlighted. Over the last few years, single-molecule techniques such as force spectroscopy have improved in sensitivity and can today be used to detect forces in the pN range. In addition, these techniques can be used to investigate properties of single molecules close to physiological conditions. The challenges in the interpretation of the observations are aided by control experiments using well-characterised polysaccharides and by data provided by complementary methods. This field is expected to have increasing impact on the further advancement of the molecular understanding of the role of polysaccharides in various biological processes such as recognition and cell adhesion.

Single-molecular Pair Unbinding Studies of Mannuronan C-5 Epimerase AlgE4 and Its Polymer Substrate

Alginate biosynthesis involves C-5-mannuronan epimerases catalyzing the conversion of beta-D-mannuronic acid to alpha-L-guluronic acid at the polymer level. Mannuronan epimerases are modular enzymes where the various modules yield specific sequential patterns of the converted residues in their polymer products. Here, the interaction between the AlgE4 epimerase and mannuronan is determined by dynamic force spectroscopy. The specific unbinding between molecular pairs of mannuronan and AlgE4 as well as its two modules, A and R, respectively, was studied as a function of force loading rate. The mean protein-mannuronan unbinding forces were determined to be in the range 73-144 pN, depending on the protein, at a loading rate of 0.6 nN/s, and increased with increasing loading rate. The position of the activation barrier was determined to be 0.23 +/- 0.04 nm for the AlgE4 and 0.10 +/- 0.02 nm for its A-module. The lack of interaction observed between the R-module and mannuronan suggest that the A-module contains the binding site for the polymer substrate. The ratio between the epimerase-mannuronan dissociation rate and the catalytic rate for epimerization of single hexose residues suggests a processive mode of action of the AlgE4 epimerase yielding the observed sequence pattern in the uronan associated with the A-module of this enzyme.

Negative-ion electrospray ionisation-mass spectrometry (ESI-MS) as a tool for analysing structural heterogeneity in kappa-carrageenan oligosaccharides

Oligosaccharides, enzymically produced from kappa-carrageenan, have been investigated by electrospray ionisation mass spectrometry (ESI-MS). The technique was used without prior derivatisation of the oligosaccharide originally obtained by size-exclusion chromatography (SEC). The structure of the oligosaccharides was mainly 4-sulphated neocarrabiose (A-G4S) with an increasing length ranging from di- to dodecasaccharides. However, in the larger oligosaccharides, structural motifs deviating from the perfect alternating A-G4S structure were detected, i.e. (A2S-G4S). Although resulting in reduced signal intensity, samples to which NaCl was added also gave rise to reliable mass spectra. Desulphation was induced at elevated cone voltages and in acidic or alkaline salt solutions.

A rapid method for the separation and analysis of carrageenan oligosaccharides released by iota- and kappa -carrageenase

Based on the improved performances in speed of chromatographic separation on Superdex-type materials (Pharmacia) compared to conventional media such as Sephadex and Bio Gel-type, a rapid size-exclusion chromatography (SEC) method was developed for the separation and analysis of carrageenan oligosaccharides. It was used to evaluate the elution profiles of hydrolysates produced by carrageenases specific for kappa- and iota-carrageenans. Oligosaccharide peaks ranging from di- to dodeca-saccharides were obtained in about 20 min on an analytical scale, whereas preparative runs were completed in a few hours. The method may also be used to monitor polysaccharide degradation.