Efficacy of Low-dose (2 millicurie) versus Standard-dose (4 millicurie) Radioiodine Treatment for Cats with Mild-to-Moderate Hyperthyroidism

Background

Radioiodine (¹³¹I) is effective treatment for hyperthyroidism in cats, but optimal dose to restore euthyroidism without inducing hypothyroidism is unclear. Treatment‐induced hypothyroidism can lead to azotemia and reduced duration of survival.

Objective

To compare efficacy and short‐term outcomes of low‐dose ¹³¹I versus higher, standard‐dose ¹³¹I as treatment for hyperthyroidism.

Animals

A total of 189 client‐owned cats undergoing ¹³¹I treatment for mild‐to‐moderate hyperthyroidism (serum T₄ ≥ 4.0 μg/dL and <13.0 μg/dL).

Methods

Prospective, nonrandomized, cohort study comparing treatment with either low‐dose (2 mCi, n = 150) or standard‐dose (4 mCi, n = 39) ¹³¹I. Serum T₄, thyroid‐stimulating hormone (TSH), and creatinine concentrations were measured after 1, 3, and 6 months to determine persistent hyperthyroidism, overt hypothyroidism (low T₄, high TSH), subclinical hypothyroidism (normal T₄, high TSH), and azotemia.

Results

There was no significant difference in prevalence of cats with persistent hyperthyroidism between standard‐ and low‐dose treatment groups at 3 (0% versus 5.3%; P = .34) and 6 (0% versus 3.3%; P = .51) months. Overt (18% versus 1%; P = .0005) or subclinical (46% versus 21%; P = .004) hypothyroidism was more common in cats at 6 months after standard‐dose ¹³¹I. No difference in incidence of azotemia existed between groups, but cats treated with standard‐dose ¹³¹I had higher creatinine concentrations (P < .05) and higher percent rises in creatinine (P < .0001).

Conclusions and Clinical Importance

Low‐dose ¹³¹I is safe and effective for cats with mild‐to‐moderate hyperthyroidism, as evidenced by a cure rate of >95% with reduced frequency of iatrogenic hypothyroidism and azotemia.

Adverse reactions in horses that underwent general anesthesia and cervical myelography

Background

The study was prompted by a perceived high prevalence of myelographic complications varying in severity and type, and attributed to the contrast material or the procedure.

Hypotheses

1. Any adverse reaction (AAR) is associated with a change in CSF volume induced either by removal of CSF or addition of contrast material. 2. AAR occurs more frequently in horses with higher premyelography neurologic grade. 3. Nonspecific hyperthermia is attenuated by anti‐inflammatory and osmotic agents.

Animals

Horses (n = 278) that underwent myelography between 2000 and 2012 at 5 institutions: A (87), B (68), C (65), D (46), and E (12).

Methods

Multi‐institutional, retrospective, observational cross‐sectional study.

Results

AAR were observed in 95/278 (34%) horses, were associated with longer general anesthesia time (P = .04) and higher contrast‐medium volume (P = .04); euthanasia because of AAR was performed in 5/278 (2%) horses. Adverse neurologic reactions were the most common type of complication observed occurring in 15/278 (5%) and 42/235 (18%) of horses in the intra‐ and postmyelography periods. A relationship between AAR and premyelography neurologic grade was not identified (P = .31). Nonspecific hyperthermia was observed in 25/235 (11%) horses; no relationship was observed with administration of anti‐inflammatory drugs and osmotic agents (P = .30).

Conclusions and clinical importance

The category of AAR occurred in one‐third of the horses generally was mild and self‐limiting. These reactions were associated with increased contrast‐medium volume and longer anesthesia time; but, no specific procedural recommendations could be made because of small odds ratios (OR) of <2 for each 1 mL increase in contrast material and for each 1 minute of additional anesthesia time.

See-saw rocking: an in vitro model for mechanotransduction research

In vitro mechanotransduction studies, uncovering the basic science of the response of cells to mechanical forces, are essential for progress in tissue engineering and its clinical application. Many varying investigations have described a multitude of cell responses; however, as the precise nature and magnitude of the stresses applied are infrequently reported and rarely validated, the experiments are often not comparable, limiting research progress. This paper provides physical and biological validation of a widely available fluid stimulation device, a see-saw rocker, as an in vitro model for cyclic fluid shear stress mechanotransduction. This allows linkage between precisely characterized stimuli and cell monolayer response in a convenient six-well plate format. Models of one well were discretized and analysed extensively using computational fluid dynamics to generate convergent, stable and consistent predictions of the cyclic fluid velocity vectors at a rocking frequency of 0.5 Hz, accounting for the free surface. Validation was provided by comparison with flow velocities measured experimentally using particle image velocimetry. Qualitative flow behaviour was matched and quantitative analysis showed agreement at representative locations and time points. Maximum shear stress of 0.22 Pa was estimated near the well edge, and time-average shear stress ranged between 0.029 and 0.068 Pa. Human tenocytes stimulated using the system showed significant increases in collagen and GAG secretion at 2 and 7 day time points. This in vitro model for mechanotransduction provides a versatile, flexible and inexpensive method for the fluid shear stress impact on biological cells to be studied.

Three-dimensional conformal versus non-graphic radiation treatment planning for apocrine gland adenocarcinoma of the anal sac in 18 dogs (2002-2007)

Differences in dose homogeneity and irradiated volumes of target and surrounding normal tissues between 3D conformal radiation treatment planning and simulated non-graphic manual treatment planning were evaluated in 18 dogs with apocrine gland adenocarcinoma of the anal sac. Overall, 3D conformal treatment planning resulted in more homogenous dose distribution to target tissues with lower hot spots and dose ranges. Dose homogeneity and guarantee of not under-dosing target tissues with 3D conformal planning came at the cost, however, of delivering greater mean doses of radiation and of irradiating greater volumes of surrounding normal tissue structures.

Mechanobiology of bone healing and regeneration: in vivo models

Mechanical boundary conditions are well known to influence the regeneration of bone and mechanobiology is the study of how mechanical or physical stimuli regulate biological processes. In vivo models have been applied over many years to investigate the effects of mechanics on bone healing. Early models have focused on the influence of mechanical stability on healing outcome, with an interest in parameters such as the magnitude of interfragmentary movement, the rate and timing of application of micromotion and the number of loading cycles. As measurement techniques have been refined, there has been a shift in orders of magnitude from investigations targeted at the organ level to those targeted at the tissue level and beyond. An understanding of how mechanics influences tissue differentiation during repair and regeneration crucially requires spatial and temporal knowledge of both the local mechanical environment in the healing tissue and a characterization of the tissues formed over the course of regeneration. Owing to limitations in the techniques available to measure the local mechanical conditions during repair directly, simulation approaches, such as the finite element method, are an integral part of the mechanobiologist's toolkit, while histology remains the gold standard in the characterization of the tissue formed. However, with rapid advances occurring in imaging modalities and methods to characterize tissue properties, new opportunities exist to better understand the role of mechanics in the biology of bone regeneration. Combined with developments in molecular biology, mechanobiology has the potential to offer exciting, new regenerative treatments for bone healing.

In vitro models for bone mechanobiology: Applications in bone regeneration and tissue engineering

Healthy bone healing is a remarkable, mechanically sensitive, scar-free process that leads rapidly to repair tissue of high mechanical quality and functionality, and knowledge of this process is essential for driving advances in bone tissue engineering and regeneration. Gaining this knowledge requires the use of models to probe and understand the detailed mechanisms of healing, and the tight coupling of biology and mechanics make it essential that both of these aspects are controlled and analysed together, using a mechanobiological approach. This article reviews the literature on in vitro models used for this purpose, beginning with two-dimensional (2D) cell culture models used for applying controlled mechanical stimuli to relevant cells, and detailing the analysis techniques required for understanding both substrate strain and fluid flow stimuli in sufficient detail to relate them to biological response. The additional complexity of three-dimensional (3D) models, enabling more faithful representation of the healing situation, can require correspondingly more sophisticated tools for mechanical and biological analysis, but has recently uncovered exciting evidence for the mechanical sensitivity of angiogenesis, essential for successful healing. Studies using explanted tissue continue to be vital in informing these approaches, providing additional evidence for the relevance of effects in biological and mechanical environments close to those in the living organism. Mechanobiology is essential for the proper analysis of models for bone regeneration, and has an exciting integrative role to play not only in advancing knowledge in this area, but also in ensuring successful translation of new tissue engineering and regenerative therapies to the clinic.

Immunopathogenesis of ovarian cancer

Immune cells in the ovarian stromal microenvironment play an important role in ovarian tumorigenesis. Up-regulation of immune cell-derived mediators during ovulation may generate a proinflammatory niche, which may subsequently induce transformation of normal ovarian epithelial cells or endometriotic cells in the ovary. Once transformed ovarian epithelial cells develop, an immunoediting process occurs in which immune cells and their mediators dictate the development and progression of ovarian tumors. Tumor cells also develop several mechanisms to evade anti-tumor immunity by developing an immunosuppressive microenvironment. The differences in the population of immune cells infiltrating into ovarian tumor tissues are associated with differences in clinical outcomes. The underlying molecular mechanisms of the association begin to unravel with the development of microdissection techniques, high throughput technologies, in vitro functional assays, and in vivo mouse modeling. A better understanding of the complex relationship between ovarian tumor cells and the associated immune cells will allow us to develop novel immunologic strategies for ovarian cancer prevention and treatment.

Bilateral correction of metatarsal rotation in a dog using circular external skeletal fixation

An 8-month-old castrated male Saint Bernard was evaluated for bilateral hind limb lameness. Lameness was ascribed to bilateral metatarsal rotational abnormalities on the basis of the physical examination and radiographic evaluations. Staged, bilateral deformity correction and tarsometatarsal arthrodeses were performed using circular external skeletal fixators. The dog's gait improved following surgery and the fixators were removed 3 (left hind paw) and 4 (right hind paw) months following surgery. Twenty months after the initial surgery, the owner reported that the dog was walking well without apparent lameness. Previous reports suggest that metatarsal rotation is untreatable; however, our results suggest that surgical correction of this deformity can substantially improve limb function in dogs affected with metatarsal rotation.

Digital image correlation: A technique for determining local mechanical conditions within early bone callus

Local mechanical conditions are known to play a role during the regeneration of musculoskeletal tissues, and histomorphometrical investigations of the time course of healing have enabled specific conclusions regarding the mechanosensitivity of tissue differentiation. However, the mechanism for this influence is not clearly understood. In order to extend this analysis, it is essential to link local histological understanding with direct characterisation of the local mechanical environment. Digital image correlation (DIC) is a computer-based image analysis technique that enables the non-contact measurement of strains on material surfaces and is finding application in many areas of biomechanics. Here we report a DIC technique to investigate the local distribution of mechanical strain within regenerating soft tissue sections. We provide exemplary data from analysis of a section of sheep bone callus. An assessment of displacement measurement accuracy gave an RMS error of 4.2 microm, corresponding to an estimated strain error of 1.4%. The sections showed concentrations of up to four times the applied strain and comparison of the strain patterns with histological analysis confirmed that these concentrations reflected boundaries between hard and soft callus.

Pericardial lipoma in a geriatric dog with an incidentally discovered thoracic mass

An intrathoracic mass was discovered as an incidental finding in a 14-year-old, spayed, female Rottweiler cross during evaluation of urinary incontinence. Computed tomography suggested a pericardial or pleural location and high adipose content of the mass. The mass was removed via lateral thoracotomy with partial pericardectomy and was diagnosed as a pericardial lipoma. The dog recovered well, and there was no evidence of recurrence approximately one year later. Adipose tumours of the heart and its associated structures are rare in dogs and have been associated with both successful and fatal outcomes.

A comparison of structural and mechanical properties in cancellous bone from the femoral head and acetabulum

Mechanical interlock obtained by penetration of bone cement into cancellous bone is critical to the success of cemented total hip replacement (THR). Although acetabular component loosening is an important mode of THR failure, the properties of acetabular cancellous bone relevant to cement penetration are not well characterized. Bone biopsies (9mm diameter, 10mm long) were taken from the articular surfaces of the acetabulum and femoral head during total hip replacement. After mechanical and chemical defatting the two groups of bone specimens were characterized using flow measurement, mechanical testing and finally serial sectioning and three-dimensional computer reconstruction. The mean permeabilities of the acetabular group (1.064 × 10−10 m2) and femoral group (1.155x 10−10m2) were calculated from the flow measurements, which used saline solution and a static pressure of 9.8 kPa. The mean Young's modulus, measured non-destructively, was 47.4 MPa for the femoral group and 116.4MPa for the acetabular group. Three-dimensional computer reconstruction of the specimens showed no significant differences in connectivity and porosity between the groups. Results obtained using femoral head cancellous bone to investigate bone cement penetration and fixation are directly relevant to fixation in the acetabulum.

Gait evaluation: a tool to monitor bone healing?

BACKGROUND

Current clinical methods for monitoring fracture healing are often invasive and inaccurate. This paper evaluates the use of a pressure sensitive platform to improve monitoring.

METHODS

Standardised 3 mm diaphyseal bone defects were created in the right tibia of 64 female sheep and stabilised with either a rigid monolateral external fixator or a more flexible variant. Over a nine week healing period gait parameters were measured using a pressure sensitive platform and interfragmentary movements at the fracture site were monitored. Frequency spectra were calculated for the ground reaction forces. The tibiae were tested biomechanically after sacrifice and callus sections were analysed histomorphometrically.

FINDINGS

All animals unloaded the operated and overloaded the contralateral hindlimb. Callus mineralisation and stiffness, as well as limb loading increased during healing whilst interfragmentary movements were reduced. Larger interfragmentary movements resulted in a slower fracture healing rate as documented histologically and biomechanically. Frequency analysis showed upto 14 dB loss of power at frequencies associated with bone mechanotransduction at four weeks postoperatively, reducing to a 3 dB loss at nine weeks.

INTERPRETATION

Gait analysis is a valuable tool for monitoring the course of fracture healing. Different fixation stiffnesses caused different initial interfragmentary movements leading to different healing rates. Ground reaction forces were strongly related to the course of callus mineralisation and thus directly reflected the recovery of stiffness at the fracture site. Reduced levels of loading frequencies that may affect bone healing persist to nine weeks postoperatively.

Regulation of elongation factor-1 expression by vitamin E in diabetic rat kidneys

Translation elongation factor-1 (EF-1) forms a primary site of regulation of protein synthesis and has been implicated amongst others in tumorigenesis, diabetes and cell death. To investigate whether diabetes-induced oxidative stress affects EF-1 gene expression, we used a free radical scavenger, vitamin E. The following groups of rats (5/group) were studied: control, vitamin E control, diabetic and diabetic treated with vitamin E. Markers of hyperglycemia, kidney function, oxidative stress, and kidney hypertrophy were elevated in diabetic rats. Increased urinary protein excretion indicated early signs of glomerular and tubular dysfunction. The mRNA and protein levels of the three EF-1 subunits (A, Balpha, and Bgamma) were determined in renal cortex extracts using semi-quantitative reverse transcription-polymerase chain reaction (RT-PCR), northern blot analysis and western blotting. EF-1A mRNA expression in renal cortex extracts was significantly increased by at least 2-fold (p < 0.002) in diabetic rats; however, there was no change in the mRNA levels of EF-1Balpha and EF-1Bgamma subunits. Similar results were observed at the protein level. Treatment of diabetic rats with vitamin E for 10 days suppressed both glycemic and oxidative stresses in renal cortex and kidney hypertrophy. EF-1A mRNA and protein levels were also reduced to control levels. In conclusion, EF-1A but not EF-1Balpha and EF-1Bgamma gene expression is significantly enhanced in the renal cortex of diabetic rats. Normalization of enhanced EF-1A expression by vitamin E treatment suggests a role for EF-1A during diabetes-induced oxidative stress.

Angle stable locking reduces interfragmentary movements and promotes healing after unreamed nailing. Study of a displaced osteotomy model in sheep tibiae

BACKGROUND

Large interfragmentary movements may delay bone-healing. The hypothesis of the present study was that a reduction of interfragmentary movements, especially of torsional rotation and bending angles, would support the healing process and lead to improved healing following unreamed tibial nailing. The objective of this study was to investigate healing of an unstable tibial osteotomy site following stabilization with unreamed nailing with a modified tibial device that had angle stable holes for the locking bolts. We compared those findings with healing after stabilization of such sites with standard unreamed tibial nailing. The duration of the study period was nine weeks.

METHODS

The site of a standardized displaced osteotomy (3-mm gap) in twelve ovine tibiae was stabilized with unreamed tibial nailing: six animals were treated with a modified nail that had angle stable holes for the locking bolts, and six were treated with standard unreamed tibial nailing. In vivo gait analysis with optical measurements of interfragmentary movements and simultaneous measurements of ground reaction parameters were performed three days after the operation and once weekly afterward. After the animals were killed at nine weeks, the treated and contralateral tibiae were explanted, the implants were removed, and radiographs were made and evaluated for bridged cortices. Each pair of tibiae was also mechanically tested until torsional failure, after which the whole callus region was subjected to histological and histomorphometric analysis.

RESULTS

Throughout the examination period, the interfragmentary movements in all directions were significantly smaller in the group treated with the angle stable tibial nail than they were in the group treated with standard unreamed tibial nailing. The limbs treated with the angle stable tibial nails returned to almost full weight-bearing during the period of the investigation, whereas those treated with standard nailing did not. Histomorphometric analysis, radiographic data, and mechanical testing showed superior bone-healing following treatment with the angle stable tibial nail.

CONCLUSIONS

Use of an angle stable tibial nail may help to reduce interfragmentary movements in vivo and thus lead to superior bone-healing compared with that following standard unreamed tibial nailing.

Effects of acetabular resurfacing component material and fixation on the strain distribution in the pelvis

A 3D finite element (FE) model of an implanted pelvis was developed as part of a project investigating an all-polymer hip resurfacing design. The model was used to compare this novel design with a metal-on-metal design in current use and a metal-on-polymer design typical of early resurfacing implants. The model included forces representing the actions of 22 muscles as well as variable cancellous bone stiffness and variable cortical shell thickness. The hip joint reaction force was applied via contact modelled between the femoral and acetabular components of the resurfacing prosthesis. Five load cases representing time points through the gait cycle were analysed. The effect of varying fixation conditions was also investigated. The highest cancellous bone strain levels were found at mid-stance, not heel-strike. Remote from the acetabulum there was little effect of prosthesis material and fixation upon the von Mises stresses and maximum principal strains. Implant material appeared to have little effect upon cancellous bone strain failure with both bended and unbonded bone-implant interfaces. The unbonded implants increased stresses in the subchondral bone at the centre of the acetabulum and increased cancellous bone loading, resembling behaviour obtained previously for the intact acetabulum.

Tensile mechanical properties of polyacetal after one and six months' immersion in Ringer's solution

The engineering polymer polyacetal (also known as polyoxymethylene) has a long history of clinical use including in the femoral component of the Freeman all-polymer knee replacement. The polymer is a promising material for novel applications including the femoral component of hip resurfacing prostheses. However, no work following the effect on mechanical properties of extended immersion in the physiological environment has been reported. Samples of five grades of polyacetal were obtained and tested on an MTS Bionix 858 at 37 degrees C in physiological saline. Three groups of specimens were tested: "as received"; immersed in Ringer's solution at 37 degrees C for one month; immersed in Ringer's solution at 37 degrees C for six months'. While there were negligible reductions in the ultimate tensile strengths, the Young's moduli of all polymer grades showed significant reductions (p < 0.01) of up to 19.5% following one months' immersion. There were negligible changes in ultimate tensile strength and stiffness between one and six months' immersion, however some polymers showed a small, but significant (p < 0.05) increase in stiffness. The percentage elongation and true stress for plastic instability showed negligible changes following immersion for one and six months'. These results encourage the use of polyacetal in load-bearing orthopaedic applications.

Acetabular morphology and resurfacing design

The bony surfaces of 18 archaeological hemipelves were scanned using a 3D laser surface scanner and CyDir software on a Silicon Graphics workstation. The acetabular area was selected and point data from the approximately spherical bone surface saved. These data were input to a MATLAB routine that calculated the radius and centre of the best-fit sphere. The goodness of fit was estimated using the mean and standard deviation of the distance of the bone surface points from the sphere surface. Eight points, at approximately equal distances around the acetabular rim, were selected with reference to bony landmarks. A plane containing three of these points served as an orientation reference plane. The vectors joining the eight rim points to the centre of the best-fit sphere were found. The angles between these vectors and the normal to the reference plane were calculated. Paired angles were summed to give the angle subtended by the acetabular rim in four directions. The overall mean angle was 158 degrees (range of mean angles 145 degrees -173 degrees ). The largest individual angles, some exceeding 180 degrees, were in the superior-inferior direction, while the mean angle in the anterior-posterior direction, i.e. that controlling flexion-extension, was 152 degrees. Males had larger subtended angles than females, although the difference was not statistically significant. Simulated reaming increased all angles by approximately 10 degrees. The subtended angles are important parameters in the design of the acetabular component of a hip replacement and particularly important in resurfacing hip replacement when the volume available is tightly constrained.

Determination of the cDNA sequence and mRNA expression of interleukin-1 receptor antagonist in horses

OBJECTIVE

To determine the complementary DNA (cDNA) sequence of interleukin-1 receptor antagonist (IL-1ra) in horses and compare messenger RNA (mRNA) expression of IL-1ra among horses of various breeds.

SAMPLE POPULATION

Blood samples from neonatal and adult horses examined for a variety of diseases.

PROCEDURE

A polymerase chain reaction procedure was used to amplify a 220 base pair (bp) portion of the genomic DNA. The upstream and downstream regions of the cDNA sequence were determined by means of 5' and 3' rapid amplification of cDNA ends (RACE) procedures. Northern blot hybridization was used to examine steady-state mRNA expression of IL-1ra.

RESULTS

The consensus sequence of the cDNA obtained with the 5'-RACE procedure and the sequence for the 220 bp portion of the genomic DNA represented the putative sequence for secreted IL-1ra. The predicted secreted IL-1ra amino acid sequence contained 176 residues with an in-frame stop codon; the N-terminal 25 amino acid residues resembled the signal peptide reported for human secreted IL-1ra. An approximately 1.3 kilobase pair (kb) band that represented a portion of the 3' end of the coding region and the 3' untranslated region was obtained by use of the 3' -RACE procedure. Northern blot hybridization detected a 1.6 kb transcript in blood RNA from adult Arabian, Belgian, Thoroughbred, and Standardbred horses.

CONCLUSIONS

Results suggest that the DNA for equine secreted IL-1ra has a short (29 bp) 5' untranslated region, a 534 bp coding region, and a long (approximately 1,080 bp) untranslated region.

Cloning and genetic mapping of zebrafish BMP-2

The BMP family of polypeptide growth factors has been shown to play diverse roles in establishing embryonic patterning and tissue fates. We report the cloning of the zebrafish homologue of BMP-2, examine its expression during embryogenesis, and find that it is localized to the distal end of the long arm of zebrafish chromosome 20. A missense mutation of the bmp2 gene has recently been shown to be responsible for the early dorsalized phenotype of the zebrafish swirl mutant [Kishimoto et al., 1997]. Given the dynamic expression of bmp2 in the developing embryo and the complex interactions of BMP signaling response in vertebrates, it is possible that other mutant phenotypes, due to altered bmp2 gene expression, will eventually map to or interact with this genetic locus.

Use of rutin for medical management of idiopathic chylothorax in four cats

Four cats with idiopathic chylothorax were given rutin. Three of the 4 cats had clinical improvement, and complete resolution of chylous effusion was evident in 2 cats. Idiopathic chylothorax in cats is a condition that may be difficult to resolve with medical or surgical treatment. Currently, thoracic duct ligation is considered the preferred technique, but expense and a guarded prognosis for resolution may make this procedure undesirable to cat owners. Rutin administration may offer an alternative to traditional treatments or may be useful as an adjunctive treatment.

Compositional and structural control in bone regenerative coatings

The development of a low-temperature method of producing bioactive coatings for medical implants has been shown to bypass the problems associated with high temperature processing routes, in particular the appearance of amorphous phases and non-stoichiometric hydroxyapatite (HA), and delamination of the coating from the substrate. An electric field/aqueous solution technique for producing adherent, crack-free calcium phosphate coatings on titanium and stainless steel substrates is described. The characteristics of the coating are a function of electrode spacing, supersaturation, temperature and current and voltage conditions. Scanning electron microscopy (SEM) characterized the surface morphology of the coatings, which were shown to be HA. The possibility of producing a coating of carbonate-substituted HA having the same chemical composition as bone apatite, and forming at physiological temperatures, has also been demonstrated. The size of the microstructure decreased and the morphology changed as the carbonate ion concentration in the calcium and phosphate ion solution increased.

Acute paraplegia in a puppy with hemophilia A

A seven-week-old, male chow chow-keeshond cross puppy was presented with acute paraplegia and episcleral hemorrhage. An X-linked, hereditary coagulopathy was suspected and confirmed by clotting factor analysis and necropsy findings of intraspinal hemorrhage. In young, male puppies with acute spinal pain and long-tract signs, intraspinal hematoma secondary to inherited X-linked coagulation factor deficiencies should be considered in the differential diagnosis.

Moment arms of the digital flexor tendons at the wrist: role of differential loading in stability of carpal tunnel tendons

When a flexor digitorum superficialis tendon crossing a flexed or extended wrist has a load applied to it in excess of that applied to adjacent tendons, that tendon may translate across the carpal tunnel. In 6 cadaver specimens, each of the 9 carpal tunnel tendons was loaded with a baseline tension of 85 g and the moment arms of the flexor pollicis longus and the 4 flexor digitorum superficialis tendons were determined. Applying a higher 540-g load to individual flexor digitorum superficialis tendons and the flexor pollicis longus while loading the remaining tendons with the baseline 85-g tension significantly changed the moment arms from those measured under baseline load. The results demonstrated that tendons with applied differential loads in the carpal tunnel shift their positions, as revealed by their changing moment arms.

A Monte Carlo Investigation of Methods for Controlling Type I Errors with Specification Searches in Structural Equation Modeling

A standard strategy in structural equation modeling is to conduct multiple Lagrange multiplier (LM) tests after rejection of an initial model. Controlling for Type 1 error across these tests minimizes the likelihood of including unnecessary additional parameters in the model. Three methods for controlling Type I errors are evaluated using simulated data for factor analytic models: the standard approach which involves testing each parameter at the .05 level, a Bonferroni approach, and a simultaneous test procedure (STP). In the first part of the study, all samples were generated from a population in which all null hypotheses associated with the LM tests were correct. Three factors were manipu1,~ted: factor weights, sample size, and number of parameters in the specification search. The standard and the STP approaches yielded overly liberal and overly conservative familywise error rates, respectively, while the Bonferroni approach yielded error rates closer to the nominal level. In the second part of the study, data were generated in which one or more null hypotheses associated with the LM test were incorrect, and the number of parameters in the search was manipulated. Again the Bonferroni method was the best approach in controlling familywise: error rate, particularly when the alpha level was adjusted for the number of parameters evaluated at each step.

Contraceptive implants: long acting and provider dependent contraception raises concerns about freedom of choice

David Bromham's editorial on contraceptive implants ignores the wider issues to voice concern that trial by media could limit contraceptive choice by jeopardising research into new methods. However, it is more beneficial to the public for points of conflict to be debated openly. Furthermore, the impetus for research into new contraceptive technology is driven by profit and political motives and is only marginally affected by the media. Implanted contraceptives may increase the choice of contraceptive methods, but they put control of fertility increasingly into the hands of the medical profession. Herein lies their greatest problem: their potential to increase providers' control over clients' choice. There is the danger that certain groups of women may be targeted for their use: in the United States the coercive use of Norplant for mothers receiving welfare benefit has been suggested. Long acting contraceptives are a contraceptive of choice only when they are available without pressure, as part of a wider menu; when instant removal on request is guaranteed; and when there is an open and free flow of information and opinions between users, health professionals, and special interest groups.

The use of the arthroscope as an adjunct in the resection of a chondroblastoma of the femoral head

We present a case of the use of an arthroscope as an adjunct in the resection of a tumor (chondroblastoma) of the femoral head. Use of the endoscope in this case allowed preservation of the femoral head and neck. Although the arthroscope has been used intraarticularly for the resection of tumors, to our knowledge it has not been used endosteally.

One peer review organization's experience in developing hospital peer groups

The Health Care Quality Improvement Initiative is moving Medicare's quality improvement activities from review and action on individual cases to the analysis of patterns of care. A primary source for pattern analysis is the mortality data presented in the Medicare Hospital Information release. One of the requirements set forth by the Health Care Financing Administration is that peer review organizations classify hospitals into peer groups in order to compare mortality rates within and among groups. It is hoped that this type of analysis will lead to a better understanding of the relationship between process and outcome for a variety of medical conditions. This report describes the experience of one peer review organization in establishing hospital peer groups.

The cost effectiveness of auranofin: results of a randomized clinical trial

In a 6-month randomized trial at 14 sites, the cost effectiveness of auranofin (AF) treatment for patients with rheumatoid arthritis was gauged in comparison with placebo. Measures of global health and of impacts on daily life suggest that the benefits of disease modification outweigh adverse effects after 4 and 6 months of treatment (p less than 0.01), with negligible differences between placebo and treated patients after 1 and 2 months. Additional medical costs directly associated with AF treatment amounted to $778/patient annually. Observed differences in less direct medical costs, help received, and earnings were not statistically significant.

Cost-effectiveness of total joint arthroplasty in osteoarthritis

Although total joint replacement (TJR) is a major advance in the treatment of patients with osteoarthritis, its cost-effectiveness has been questioned. We report the results of a study of the costs and benefits of TJR in consecutive osteoarthritis patients, 6 months after the surgery. Health status was measured by the Index of Well-Being. Costs of services for arthritis were determined by interview and billing records. Six months after TJR, significant improvements were seen in global health and in functional status. The average cost of care for the 6 months prior to TJR was $933. The average cost during the 6 months beginning with the TJR was $22,730 per patient--due almost entirely to costs of surgery. In general, the surgery did not change work status, probably because the mean age of the patients was 66.4 years. There were large effectiveness/cost differentials (the larger the effectiveness/cost differential, the higher the degree of cost-effectiveness [CE]). At 6 months, for all patients, the CE was associated with initial health status. The highest CE was observed in 10 patients who initially had the poorest health. TJR is more cost-effective for patients with the most to gain and less effective for those with better preoperative health status.

Willingness to pay and accept risks to cure chronic disease

Measurements of disease burden focus most often on economic outputs--neglecting effects on quality of life. More comprehensive quantification is based on what people would pay or risk to avoid illness. Many, however, find it difficult to respond thoughtfully to hypothetical questions about what they would pay or risk. With response rates frequently under 50 per cent, the practicality of these methods has been of concern. In this study, specially trained interviewers asked 247 subjects with rheumatoid arthritis how much of their income they would pay and how large a mortal risk they would accept to achieve a hypothetical cure. Ninety-eight per cent of the subjects estimated their maximum acceptable risk (MAR) at an average 27 per cent chance of immediate death. Eighty-four per cent gave plausible responses to the willingness-to-pay (WTP) questions, with a mean WTP of 22 per cent of household income. The aspect of disease most strongly associated with WTP was impairment in activities of daily living; measured pain was most associated with MAR. The response rates achieved indicate the overall feasibility of these methods; the associations of WTP and MAR with other variables suggest systematic consideration of personal circumstances.

A randomized controlled trial of quality assurance in sixteen ambulatory care practices

A crossover randomized controlled trial of cycles of quality assurance in 16 primary care (8 medical, 8 pediatric) group practices was conducted. Of four medical and four pediatric tasks important to patient outcome, two were randomly assigned to experimental intervention (a quality assurance cycle), and two were also measured and used as blinded controls for each medical or pediatric group practice. Task performance was measured in each group for 12 months prior to, 9 months during, and 9 months after the experimental intervention, using as a performance score the percentage of evaluation criteria failed of those applicable to a case. As a result of quality assurance intervention, quality of performance was significantly improved in two of the tasks (P less than 0.0001, with 6.7, and 9.8 percentage points improvement), and marginally improved in one task (P = 0.06, 5.7 percentage points improvement). Surprisingly, tasks with lower perceived effect on patient health (low physician motivation) had greater improvement in quality. Unimproved tasks were associated with the perceived need for delivery system changes beyond the immediate control of the individual practitioner.

Resource requirements for evaluating ambulatory health care

We implemented the most frequently used form of quality assurance activity: abstracting information on the quality of patient care from medical records and communicating findings to providers in 16 ambulatory care groups. Site providers accepted the evaluation criteria, agreed that deficiencies in care were detected, and, for some medical tasks, effected improvements in care. Direct costs in 1980 dollars for the quality assurance cycle including data system development were $46 per evaluated case. Per-case costs varied considerably among tasks, decreased with larger numbers of cases and as experience grew, and were reduced through computerization. Measured costs were high due to: a demanding research design; our extended accounting of direct, indirect, and induced costs; and the substantial resource requirements of rigorously performed evaluations.

Evaluation of a computer-assisted medication refill reminder system for improving patient compliance

Computer-generated refill reminder notices were mailed to patients receiving continual medication for cardiovascular diseases to measure improved compliance and to discover whether a computer-assisted program was economically viable. Guidelines were established to define compliance. A computer-assisted compliance intervention program did not significantly improve the rate at which patients had their prescriptions filled "on time" and the mean compliance rate for both experimental and control groups was greater than 79%. Also discussed were cost and compliance strategy implications and the receptiveness of patients to the reminder program.

Quality assurance in eight adult medicine group practices

Four evaluations of ambulatory medical care tasks were developed for use in quality assurance. The evaluations used medical records data and explicit criteria incorporating branching logic. They were implemented in eight general medicine provider groups in two teaching hospitals and six related health centers. Agreement with criteria among 316 provider responses to questionnaires varied from 57% to 100%. The percentage of cases with one or more variation from evaluation criteria, confirmed on peer review to have a deficiency in care, ranged by task from 6% to 42%, with substantial variation between sites. Physician reviewers from each site varied in leniency. Numbers of actions taken to correct deficiencies ranged by site and task from zero to six. Multisite evaluations revealed differences in performance and efforts to improve that are not apparent when each site conducts its own evaluations. More uniformly effective and impartial quality assurance is needed to correct some important deficiencies in care observed in this study.

Feasibility of willingness-to-pay measurement in chronic arthritis

Quantification of nonmonetary aspects of disease is a major challenge for economic analysts. Using the amounts of money recipients are willing to pay for nonmonetary benefits has theoretical appeal, but it has proven difficult to implement. Difficulties encountered include noncomprehension by subjects, misrepresentation of preferences, extraneous determinants of answers, and ethical concerns. In a preliminary exploration of feasibility, 184 patients with osteoarthritis and rheumatoid arthritis were asked their willingness to pay (WTP) for hypothetical complete cure. With minimal pressure put on the patients to respond, 27 percent gave plausible answers. People with more schooling, with paid employment, or who were having more treatments for their arthritis were more likely to respond. Patients were willing on average to pay 17 percent of family income for arthritis cure. Methods for measuring WTP are being strengthened and may soon play an important role in health services research.

A method for evaluating performance of ambulatory pediatric tasks

Four evaluations of ambulatory pediatric tasks were used for quality assurance in eight pediatric group practices situated in two teaching hospitals and six related health centers. The evaluations used criteria incorporating branching logic to judge the quality of care revealed in data abstracted from medical records. Performance was evaluated for follow-up of positive urine cultures, assessment and follow-up of otitis media, initial assessment for gastroenteritis, and "well child" care for infants. A computerized data system was developed to process evaluation data and produce easily read reports. This work is part of a controlled trial of the feasibility, cost, and effectiveness of quality assurance as a means to improve patient care, but this preliminary report concerns only the principles for design of the evaluations and their use in quality assurance. Acceptance of evaluations by site providers was high: of 203 provider responses to a survey, only four reported disagreement with the criteria. Rates of cases "variant" from criteria and found on peer review to represent deficiencies in care, when averaged across sites, ranged by task from 1% to 47% of cases evaluated. In most sites, providers planned and implemented actions to correct these deficiencies. It is noted that improvements in care may increase costs of care.

Physician perceptions of medical malpractice and defensive medicine

Using judgments obtained in interviews with 33 Massachusetts physicians, the annual statewide volume of expenditures incurred for defensive medical reasons in 1982 was estimated to be $1.0 billion, 12% of all medical care expenditures. Estimates for the nation were $37 billion, 14% of expenditures. Nationally, 180,000 cesarean deliveries were thought to be performed for defensive motives. In their own institutions, respondents judged 43% of all skull x-rays following injury to be medically justified, 30% to be defensive medicine, 16% to be placebos, and 11% to be physician misjudgments. In considering the economic and noneconomic costs of medical malpractice procedures, the dollar costs of insurance were considered most serious, followed closely by defensive medicine, unfairness, and poorer relations with patients. Thirty-two percent of the responsibility for the negative aspects of malpractice processes was assigned to lawyers, 21% to physicians, 18% to legislatures and courts, 16% to patients, and 13% to insurance companies.

The cost of quality assurance in medicine

Cost analysis has been frequently neglected in program evaluations but is currently of high relevance in policy decisions on quality assurance in medicine. The Ambulatory Care Medical Audit Demonstration (ACMAD) Project implemented and evaluated a program of medical record-based quality assurance in eleven sites for nine medical topics. Total direct costs for the project were $1.22 million over five years; indirect costs, $694,000. A computerized data system enabled disaggregation of the cost data by person, timing, type of work, project phase, health topic, health center, and research or operational nature. Of the costs incurred, 79% were for operational reasons, with 21% incurred for research reasons. Costs per audited case were 31% higher in hospitals than in neighborhood health centers. Audit topics of low per-case costs tended to have automated case findings, straightforward and limited abstracting, little need to examine multiple visits, and a low proportion of case-found patients ineligible for audit.

Health versus money. Value judgments in the perspective of decision analysis

An important, but largely uninvestigated, value trade-off balances marginal nonhealth consumption against marginal medical care. Benefit-cost analysts have traditionally, if not fully satisfactorily, dealt with this issue by valuing health gains by their effects on productivity. Cost-effectiveness analysts compare monetary and health effects and leave their relative valuations to decision makers. A decision-analytic model using the satisfaction or utility gained from nonhealth consumption and the level of health enables one to calculate willingness to pay--a theoretically superior way of assigning monetary values to effects for benefit-cost analysis-and to determine minimally acceptable cost-effectiveness ratios. Examples show how a decision-analytic model of utility can differentiate medical actions so essential that failure to take them would be considered negligent from actions so expensive as to be unjustifiable, and can help to determine optimal legal arrangements for compensation for medical malpractice.

Electronic fetal monitoring and clinical practice. A survey of obstetric opinion

Interviews with 12 obstetricians recognized for their scientific and clinical contributions in the use of electronic fetal monitoring (EFM) revealed notable areas of agreement and disagreement in the interpretation and use of these methods. In reviewing 14 abnormal fetal heart rate (FHR) patterns, the obstetricians displayed an average pairwise agreement of 68% in classifying the patterns as "innocuous," "nonreassuring," or "ominous." When these patterns persisted after corrective treatment, average pairwise agreement was 69% in deciding between continued monitoring and immediate delivery. With the additional option of scalp blood pH sampling, average agreement was 59%. For the set of FHR patterns studied, scalp blood pH sampling was recommended more often to confirm conservative management of labor than to verify the need to intervene. The obstetricians may be classified by their degrees of (1) alarm and (2) interventionism, and by their (3) frequency of and (4) motivation for scalp sampling. Associations among these four dimensions of behavior were limited.

Decision-analytic determination of study size. The case of electronic fetal monitoring

There is uncertainty about the efficacy of electronic fetal monitoring (EFM) in lowering perinatal mortality among births at low prospective risk. A randomized controlled trial offers the greatest promise of reducing this uncertainty. Haphazard methods of evaluating decision making have prevailed in the past and have led to study sizes too small to estimate effects on perinatal mortality. Statistical methods can determine the study size necessary to meet statistical parameters. Choice of these parameters is, however, somewhat arbitrary. Decision-analytic methods calculate the expected value of information (EVI) as the likely worth of future decision guidance. The optimal size, cost, and focus for an evaluation study can then be taken as those maximizing the net EVI after consideration of study cost. This methodology indicates that, in evaluating EFM, two randomly-assigned groups of roughly 180,000 births each should be studied. This would achieve net expected societal benefits estimated at $118 million at a cost of roughly $22 million. The optimal study size is somewhat sensitive to analytic parameters. If feasible, a superior dynamic strategy is to allow study findings to determine the ultimate study size.

Cost-effectiveness of screening for hypo- and hyperthyroidism in India

The development of relatively inexpensive radioimmunoassay techniques opens new possibilities for widespread screening for hypo- and hyperthyroidism in developing regions where iodine deficiency is great. From component cost analysis, it appears that radioimmunoassays of thyroid hormones can be performed in India for as little as 2.4 rupees (29 cents) per test. Cost-effectiveness analysis indicates that screening for hypothyroidism in iodine-deficient areas in India is, of alternative detection strategies, the most cost-effective: Cases are found at an average cost of 40 rupees ($4.80) per case. Cost breakdowns and considerations of convenience and acceptability indicate that filter paper methods may soon be preferred to whole-blood assays, especially for screening. Cost-effectiveness findings for these screening strategies and for reasonable modifications of them should be compared with the estimated cost-effectiveness of iodine supplementation in determining optimal health policy toward subclinical thyroid disease.