P16-A111 Factors affecting the density of corneal endothelial cell cultures obtained from donor corneas

PURPOSE

The shortage of donor corneas represents a worldwide problem, and corneal endothelial cell (CEC) therapy might be a promising alternative approach. CEC can be implanted alone, which has shown limited efficacy, or with a scaffold that holds the cells together as a monolayer tissue, thus imitating Descemet membrane endothelial keratoplasty. We believe that endothelial cell density (ECD) >2000 cells/mm2, a cut-off value that eye banks use to provide quality tissues for transplantation to surgeons, should also be adopted as a parameter to define the quality of CECs as a new Advanced Therapy Medicinal Product for clinical applications in patients with endothelial dystrophies.

METHODS

We isolated and cultured CECs from one or more corneas of elderly age donors with ECDs higher than or below 2000 cells/mm2. CEC cultures were carried out on coated plates and on hydrogels with a preformed basement membrane (from TissueGUARD, Germany). Immunofluorescence with antibodies against ZO-1 was performed to evaluate the ECDs of the CEC graft obtained.

RESULTS

Our results suggest that primary cultures with ECDs>2000 cells/mm2 can be obtained on coated plated only when (1) CECs are isolated from one or more corneas of young donors; (2) CECs are isolated and pooled together from at least 2 elderly age donor corneas (if ECD>2000 cells/mm2) or 3 elderly age donor corneas (if ECD<2000 cells/mm2). Secondary cultures are all characterized by low ECDs. Hydrogels have been shown to be able to lead to increased ECDs after their release.

CONCLUSION

Our protocol highlights the difficulties in obtaining cultures with ECDs>2000 cells/mm2. Despite being achievable with corneas from young donors, this becomes challenging when corneas from elderly donors are used, i.e., the overall majority of those collected by eye banks, particularly when corneas from elderly age donors with ECD<2000 cells/mm2 are considered as a source. One alternative would be to isolate CECs from more corneas, but this might raise the issue of antigenic stimulation, which could eventually lead to transplantation failure. Our strategy to overcome these challenges is the use of a preformed basement membrane as a scaffold for CECs. However, this challenging approach should be investigated more before proceeding to clinical application.

P18-A148 Assymetrical injector for endothelium-in DMEK without the need of pull-through technique

PURPOSE

One of latest surgical development of preloaded Descemet membrane endothelial keratoplasty (DMEK) is the delivery of the graft with the endothelium inwards, which allows for a very fast operation, but requires a pull-through surgical technique. Although the tri-folded, endo-in DMEK technique has significant advantages, the absence of proper surgical instruments that could allow their use without the 'pull-through' technique still restricts the wide use of such an operation. None of the available commercial DMEK injectors could be used for tri-folded DMEK (endothelium-inward) orientation, as it requires the graft to be intently secured within the injector. This report presents a retrospective eye bank validation study of an asymmetrical injector designed to orientally implant a tri-folded DMEK graft without needing a pull-through technique.

METHODS

The injector is made from transparent plastic, allowing microscopic tissue validation directly before injection. The device is asymmetrical, so the orientation of the graft can be controlled and validated according to the best eye bank practice, which is critical for successful tri-folded DMEK graft clinical application. Four different designs of the internal compartment of the injectors were evaluated with DMEK tissues. Mates from two pairs were tested on each device type, totaling 16 grafts, all loaded with folded, endo-in grafts. The tissue was prepared, loaded into the injector, and ejected to imitate the tissue manipulation in DMEK operation.

RESULTS

After graft loading the delivery of the endothelium-in grafts was performed by injection, without the need for a pull-through technique. One graft (6.25%) has double-scrolled (changed its folding) within the injector with a larger (1.5 mm) internal compartment. The loss of valuable cells was between 3-23% (13.98% average). No significant differences in cell loss were observed between injectors with different internal compartment sizes. Higher viability loss (17.3% +/- 5.7) was observed for the grafts with >20 days death to prep-days in comparison with grafts stored with less than two weeks (10.9% +/-2.1).

CONCLUSION

The TissueGUARD injector is the only injector that currently allows oriented, tri-folded DMEK injection without the need for a pull-through technique. The average cell loss after loading and ejection was 13.98%, which is comparable/better than the current best practice with the precut-preloaded technique of naturally folded DMEK.

Techniques for RNA extraction from cells cultured in starPEG-heparin hydrogels

Three-dimensional (3D) cell culture models that provide a biologically relevant microenvironment are imperative to investigate cell–cell and cell–matrix interactions in vitro. Semi-synthetic star-shaped poly(ethylene glycol) (starPEG)–heparin hydrogels are widely used for 3D cell culture due to their highly tuneable biochemical and biomechanical properties. Changes in gene expression levels are commonly used as a measure of cellular responses. However, the isolation of high-quality RNA presents a challenge as contamination of the RNA with hydrogel residue, such as polymer or glycosaminoglycan fragments, can impact template quality and quantity, limiting effective gene expression analyses. Here, we compare two protocols for the extraction of high-quality RNA from starPEG–heparin hydrogels and assess three subsequent purification techniques. Removal of hydrogel residue by centrifugation was found to be essential for obtaining high-quality RNA in both isolation methods. However, purification of the RNA did not result in further improvements in RNA quality. Furthermore, we show the suitability of the extracted RNA for cDNA synthesis of three endogenous control genes confirmed via quantitative polymerase chain reaction (qPCR). The methods and techniques shown can be tailored for other hydrogel models based on natural or semi-synthetic materials to provide robust templates for all gene expression analyses.

Stromal fibroblasts regulate microvascular-like network architecture in a bioengineered breast tumour angiogenesis model

The plasticity of the tumour microenvironment is a key contributor to cancer development and progression. Here, we present a bioengineered breast tumour angiogenesis model comprised of mammary derived epithelial, endothelial and fibroblast cells, to dissect the mechanisms of cancer-associated fibroblasts (CAFs) on microvascular-like network formation and epithelial spheroid morphology. Primary patient-derived mammary endothelial cells, normal breast fibroblasts (NBF, patient matched) and CAFs were cultured within three-dimensional (3D) semi-synthetic hydrogels where CAFs promoted an increase in the density and morphology of the microvascular-like network. The mammary microenvironment also increased the number of MCF-10a epithelial spheroids when compared with a non-mammary microenvironment, and a malignant mammary microenvironment resulted in further morphological differences in the epithelial spheroids. The morphological changes observed following interactions between breast CAFs and endothelial cells, highlight the plasticity of the malignant stroma in tumour vascularisation. Our in vitro bioengineered breast cancer microenvironment provides a robust model to study cell-cell and cell-matrix interactions. Statement of Significance In recent years there has been an increase in the sophistication of 3D culture models, however less attention has been paid to the cell source utilised. In this study, we describe the influence of a normal and malignant stromal microenvironment on vessel-like behaviour in a 3D model. Using a semi-synthetic hydrogel, we studied the effects of mammary-derived cancer-associated fibroblasts and normal fibroblasts on human umbilical vein endothelial cells or human mammary microvascular endothelial cells. An increase in vessel-like network and epithelial cell density was seen in a mammary versus non-mammary microenvironment. This study highlights the importance of using tissue-specific endothelial cells in cancer research and demonstrates the microenvironmental impact of fibroblasts on endothelial and epithelial growth and morphology.

Electrochemical Approach for Isolation of Chitin from the Skeleton of the Black Coral Cirrhipathes sp. (Antipatharia)

The development of novel and effective methods for the isolation of chitin, which remains one of the fundamental aminopolysaccharides within skeletal structures of diverse marine invertebrates, is still relevant. In contrast to numerous studies on chitin extraction from crustaceans, mollusks and sponges, there are only a few reports concerning its isolation from corals, and especially black corals (Antipatharia). In this work, we report the stepwise isolation and identification of chitin from Cirrhipathes sp. (Antipatharia, Antipathidae) for the first time. The proposed method, aiming at the extraction of the chitinous scaffold from the skeleton of black coral species, combined a well-known chemical treatment with in situ electrolysis, using a concentrated Na₂SO₄ aqueous solution as the electrolyte. This novel method allows the isolation of α-chitin in the form of a microporous membrane-like material. Moreover, the extracted chitinous scaffold, with a well-preserved, unique pore distribution, has been extracted in an astoundingly short time (12 h) compared to the earlier reported attempts at chitin isolation from Antipatharia corals.

Author Correction: Defined Geldrop Cultures Maintain Neural Precursor Cells

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Marine biomaterials: Biomimetic and pharmacological potential of cultivated Aplysina aerophoba marine demosponge

Marine demosponges of the Verongiida order are considered a gold-mine for bioinspired materials science and marine pharmacology. The aim of this work was to simultaneously isolate selected bromotyrosines and unique chitinous structures from A. aerophoba and to propose these molecules and biomaterials for possible application as antibacterial and antitumor compounds and as ready-to-use scaffolds for cultivation of cardiomyocytes, respectively. Among the extracted bromotyrosines, the attention has been focused on aeroplysinin-1 that showed interesting unexpected growth inhibition properties for some Gram-negative clinical multi-resistant bacterial strains, such as A. baumannii and K. pneumoniae, and on aeroplysinin-1 and on isofistularin-3 for their anti-tumorigenic activity. For both compounds, the effects are cell line dependent, with significant growth inhibition activity on the neuroblastoma cell line SH-SY5Y by aeroplysinin-1 and on breast cancer cell line MCF-7 by isofistularin-3. In this study, we also compared the cultivation of human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) on the A. aerophoba chitinous scaffolds, in comparison to chitin structures that were pre-coated with Geltrex™, an extracellular matrix mimetic which is used to enhance iPSC-CM adhesion. The iPSC-CMs on uncoated and pure chitin structures started contracting 24 h after seeding, with comparable behaviour observed on Geltrex-coated cell culture plates, confirming the biocompatibility of the sponge biomaterial with this cell type. The advantage of A. aerophoba is that this source organism does not need to be collected in large quantities to supply the necessary amount for further pre-clinical studies before chemical synthesis of the active compounds will be available. A preliminary analysis of marine sponge bioeconomy as a perspective direction for application of biomaterials and secondary bioactive metabolites has been finally performed for the first time.

Naturally Prefabricated Marine Biomaterials: Isolation and Applications of Flat Chitinous 3D Scaffolds from Ianthella labyrinthus (Demospongiae: Verongiida)

Marine sponges remain representative of a unique source of renewable biological materials. The demosponges of the family Ianthellidae possess chitin-based skeletons with high biomimetic potential. These three-dimensional (3D) constructs can potentially be used in tissue engineering and regenerative medicine. In this study, we focus our attention, for the first time, on the marine sponge Ianthella labyrinthus Bergquist & Kelly-Borges, 1995 (Demospongiae: Verongida: Ianthellidae) as a novel potential source of naturally prestructured bandage-like 3D scaffolds which can be isolated simultaneously with biologically active bromotyrosines. Specifically, translucent and elastic flat chitinous scaffolds have been obtained after bromotyrosine extraction and chemical treatments of the sponge skeleton with alternate alkaline and acidic solutions. For the first time, cardiomyocytes differentiated from human induced pluripotent stem cells (iPSC-CMs) have been used to test the suitability of I. labyrinthus chitinous skeleton as ready-to-use scaffold for their cell culture. Results reveal a comparable attachment and growth on isolated chitin-skeleton, compared to scaffolds coated with extracellular matrix mimetic Geltrex®. Thus, the natural, unmodified I. labyrinthus cleaned sponge skeleton can be used to culture iPSC-CMs and 3D tissue engineering. In addition, I. labyrinthus chitin-based scaffolds demonstrate strong and efficient capability to absorb blood deep into the microtubes due to their excellent capillary effect. These findings are suggestive of the future development of new sponge chitin-based absorbable hemostats as alternatives to already well recognized cellulose-based fabrics.

Spider Chitin. The biomimetic potential and applications of Caribena versicolor tubular chitin

Diverse fields of modern technology and biomedicine can benefit from the application of ready-to-use chitin-based scaffolds. In this work we show for the first time the applicability of tubular and porous chitin from Caribena versicolor spiders as a scaffold for the development of an effective CuO/Cu(OH)₂ catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AM), and as a scaffold for the tissue engineering of selected cells. The formation of CuO/Cu(OH)₂ phases on and within the chitinous tubes leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol. On the other hand, experimental results provide for the first time strong evidence for the biocompatibility of spider chitin with different cell types, a human progenitor cell line (hPheo1), as well as cardiomyocytes differentiated from induced pluripotent stem cells (iPSC-CMs) that were cultured on a tube-like scaffold.

New Source of 3D Chitin Scaffolds: The Red Sea Demosponge Pseudoceratina arabica (Pseudoceratinidae, Verongiida)

The bioactive bromotyrosine-derived alkaloids and unique morphologically-defined fibrous skeleton of chitin origin have been found recently in marine demosponges of the order Verongiida. The sophisticated three-dimensional (3D) structure of skeletal chitinous scaffolds supported their use in biomedicine, tissue engineering as well as in diverse modern technologies. The goal of this study was the screening of new species of the order Verongiida to find another renewable source of naturally prefabricated 3D chitinous scaffolds. Special attention was paid to demosponge species, which could be farmed on large scale using marine aquaculture methods. In this study, the demosponge Pseudoceratina arabica collected in the coastal waters of the Egyptian Red Sea was examined as a potential source of chitin for the first time. Various bioanalytical tools including scanning electron microscopy (SEM), fluorescence microscopy, FTIR analysis, Calcofluor white staining, electrospray ionization mass spectrometry (ESI-MS), as well as a chitinase digestion assay were successfully used to confirm the discovery of α-chitin within the skeleton of P. arabica. The current finding should make an important contribution to the field of application of this verongiid sponge as a novel renewable source of biologically-active metabolites and chitin, which are important for development of the blue biotechnology especially in marine oriented biomedicine.

Discovery of chitin in skeletons of non-verongiid Red Sea demosponges

Marine demosponges (Porifera: Demospongiae) are recognized as first metazoans which have developed over millions of years of evolution effective survival strategies based on unique metabolic pathways to produce both biologically active secondary metabolites and biopolymer-based stiff skeletons with 3D architecture. Up to date, among marine demosponges, only representatives of the Verongiida order have been known to synthetize biologically active substances as well as skeletons made of structural polysaccharide chitin. This work, to our knowledge, demonstrates for the first time that chitin is an important structural component within skeletons of non-verongiid demosponges Acarnus wolffgangi and Echinoclathria gibbosa collected in the Red Sea. Calcofluor white staining, FTIR and Raman analysis, ESI-MS, SEM, and fluorescence microscopy as well as a chitinase digestion assay were applied in order to confirm, with strong evidence, the finding of α-chitin in the skeleton of both species. We suggest that, the finding of chitin within these representatives of Poecilosclerida order is a promising step in the evaluation of these sponges as novel renewable sources for both biologically active metabolites and chitin, which are of prospective application for pharmacology and biomedicine.

Combined influence of biophysical and biochemical cues on maintenance and proliferation of hematopoietic stem cells

Homeostasis of hematopoietic stem and progenitor cells (HSPC) is controlled by a combination of biochemical and biophysical environmental cues in the bone marrow (BM) niche, where a tight balance of quiescence and proliferation of HSPC is maintained. Specifically, alongside soluble factors and extracellular matrix (ECM) proteins, spatial confinement and ECM stiffness have been recognized to be critical for regulation of HSPC fate. Here we employ a modular, glycosaminoglycan (GAG)-based biohybrid hydrogel system to balance proliferation of human HSPC and maintenance of quiescent hematopoietic stem cells (HSC) through simultaneous regulation of exogenous biochemical and biophysical cues. Our results demonstrate that HSPC respond to increased spatial confinement with lowered proliferation and cell cycling, which results in higher frequency of quiescent LTC-IC (long-term culture initiating cells), while GAG-rich 3D environments further support maintenance of the cells.

The multi-layered protective cuticle of Collembola: a chemical analysis

Collembola, also known as springtails, are soil-dwelling arthropods that typically respire through the cuticle. To avoid suffocating in wet conditions, Collembola have evolved a complex, hierarchically nanostructured, cuticle surface that repels water with remarkable efficiency. In order to gain a more profound understanding of the cuticle characteristics, the chemical composition and architecture of the cuticle of Tetrodontophora bielanensis was studied. A stepwise removal of the different cuticle layers enabled controlled access to each layer that could be analysed separately by chemical spectrometry methods and electron microscopy. We found a cuticle composition that consisted of three characteristic layers, namely, a chitin-rich lamellar base structure overlaid by protein-rich nanostructures, and a lipid-rich envelope. The specific functions, composition and biological characteristics of each cuticle layer are discussed with respect to adaptations of Collembola to their soil habitat. It was found that the non-wetting characteristics base on a rather typical arthropod cuticle surface chemistry which confirms the decisive role of the cuticle topography.

Tackling Cell Transplantation Anoikis: An Injectable, Shape Memory Cryogel Microcarrier Platform Material for Stem Cell and Neuronal Cell Growth

Highly macroporous semisynthetic cryogel microcarriers can be synthesized for culturing stem cells and neuronal type cells. Growth factors loaded to heparin-containing microcarriers show near zero-order release kinetics and cell-loaded microcarriers can be injected through a fine gauge cannula without negative effect on the cells. These carriers can be applied for cell transplantation applications.