Benzothiazole benzimidazole (S)-isothiazolidinone derivatives as protein tyrosine phosphatase-1B inhibitors

Benzothiazole benzimidazole (S)-isothiazolidinone ((S)-IZD) derivatives 5 were discovered through a peptidomimetic modification of the tripeptide (S)-IZD protein tyrosine phosphatase 1B (PTP1B) inhibitor 1. These derivatives are potent, competitive, and reversible inhibitors of PTP1B with improved caco-2 permeability. An X-ray co-crystal structure of inhibitor 5/PTP1B at 2.2A resolution demonstrated that the benzothiazole benzimidazole forms bi-dentate H-bonds to Asp48, and the benzothiazole interacts with the surface of the protein in a solvent exposed region towards the C-site. The design, synthesis, and SAR of this novel series of benzothiazole benzimidazole containing (S)-IZD inhibitors of PTP1B are presented herein.

Structural Insights into the Design of Nonpeptidic Isothiazolidinone-containing Inhibitors of Protein-tyrosine Phosphatase 1B

Structural analyses of the protein-tyrosine phosphatase 1B (PTP1B) active site and inhibitor complexes have aided in optimization of a peptide inhibitor containing the novel (S)-isothiazolidinone (IZD) phosphonate mimetic. Potency and permeability were simultaneously improved by replacing the polar peptidic backbone of the inhibitor with nonpeptidic moieties. The C-terminal primary amide was replaced with a benzimidazole ring, which hydrogen bonds to the carboxylate of Asp(48), and the N terminus of the peptide was replaced with an aryl sulfonamide, which hydrogen bonds to Asp(48) and the backbone NH of Arg(47) via a water molecule. Although both substituents retain the favorable hydrogen bonding network of the peptide scaffold, their aryl rings interact weakly with the protein. The aryl ring of benzimidazole is partially solvent exposed and only participates in van der Waals interactions with Phe(182) of the flap. The aryl ring of aryl sulfonamide adopts an unexpected conformation and only participates in intramolecular pi-stacking interactions with the benzimidazole ring. These results explain the flat SAR for substitutions on both rings and the reason why unsubstituted moieties were selected as candidates. Finally, substituents ortho to the IZD heterocycle on the aryl ring of the IZD-phenyl moiety bind in a small narrow site adjacent to the primary phosphate binding pocket. The crystal structure of an o-chloro derivative reveals that chlorine interacts extensively with residues in the small site. The structural insights that have led to the discovery of potent benzimidazole aryl sulfonamide o-substituted derivatives are discussed in detail.

Isothiazolidinone heterocycles as inhibitors of protein tyrosine phosphatases: Synthesis and structure–activity relationships of a peptide scaffold

The structure-based design and discovery of the isothiazolidinone (IZD) heterocycle as a mimic of phosphotyrosine (pTyr) has led to the identification of novel IZD-containing inhibitors of protein tyrosine phosphatase 1B (PTP1B). The structure-activity relationships (SARs) of peptidic IZD-containing inhibitors of PTP1B are described along with a novel synthesis of the aryl-IZD fragments via a Suzuki coupling. The SAR revealed the saturated IZD heterocycle (42) is the most potent heterocyclic pTyr mimetic compared to the unsaturated IZD (25), the thiadiazolidinone (TDZ) (38), and the regioisomeric unsaturated IZD (31). The X-ray crystal structures of 11c and 25 complexed with PTP1B were solved and revealed nearly identical binding interactions in the active site. Ab initio calculations effectively explain the strong binding of the (S)-IZD due to the preorganized binding of the IZD in its low energy conformation.

Structural basis for inhibition of protein-tyrosine phosphatase 1B by isothiazolidinone heterocyclic phosphonate mimetics

Crystal structures of protein-tyrosine phosphatase 1B in complex with compounds bearing a novel isothiazolidinone (IZD) heterocyclic phosphonate mimetic reveal that the heterocycle is highly complementary to the catalytic pocket of the protein. The heterocycle participates in an extensive network of hydrogen bonds with the backbone of the phosphate-binding loop, Phe(182) of the flap, and the side chain of Arg(221). When substituted with a phenol, the small inhibitor induces the closed conformation of the protein and displaces all waters in the catalytic pocket. Saturated IZD-containing peptides are more potent inhibitors than unsaturated analogs because the IZD heterocycle and phenyl ring directly attached to it bind in a nearly orthogonal orientation with respect to each other, a conformation that is close to the energy minimum of the saturated IZD-phenyl moiety. These results explain why the heterocycle is a potent phosphonate mimetic and an ideal starting point for designing small nonpeptidic inhibitors.

Potent Benzimidazole Sulfonamide Protein Tyrosine Phosphatase 1B Inhibitors Containing the Heterocyclic (S)-Isothiazolidinone Phosphotyrosine Mimetic

Potent nonpeptidic benzimidazole sulfonamide inhibitors of protein tyrosine phosphatase 1B (PTP1B) were derived from the optimization of a tripeptide containing the novel (S)-isothiazolidinone ((S)-IZD) phosphotyrosine (pTyr) mimetic. An X-ray cocrystal structure of inhibitor 46/PTP1B at 1.8 A resolution demonstrated that the benzimidazole sulfonamides form a bidentate H bond to Asp48 as designed, although the aryl group of the sulfonamide unexpectedly interacts intramolecularly in a pi-stacking manner with the benzimidazole. The ortho substitution to the (S)-IZD on the aryl ring afforded low nanomolar enzyme inhibitors of PTP1B that also displayed low caco-2 permeability and cellular activity in an insulin receptor (IR) phosphorylation assay and an Akt phosphorylation assay. The design, synthesis, and SAR of this novel series of benzimidazole sulfonamide containing (S)-IZD inhibitors of PTP1B are presented herein.

Structure-Based Design and Discovery of Protein Tyrosine Phosphatase Inhibitors Incorporating Novel Isothiazolidinone Heterocyclic Phosphotyrosine Mimetics

Structure-based design led to the discovery of novel (S)-isothiazolidinone ((S)-IZD) heterocyclic phosphotyrosine (pTyr) mimetics that when incorporated into dipeptides are exceptionally potent, competitive, and reversible inhibitors of protein tyrosine phosphatase 1B (PTP1B). The crystal structure of PTP1B in complex with our most potent inhibitor 12 revealed that the (S)-IZD heterocycle interacts extensively with the phosphate binding loop precisely as designed in silico. Our data provide strong evidence that the (S)-IZD is the most potent pTyr mimetic reported to date.

HIV protease drug resistance and its impact on inhibitor design

The primary cause of resistance to the currently available HIV protease inhibitors is the accumulation of multiple mutations in the viral protease. So far more than 20 substitutions have been observed in the active site, dimer interface, surface loops and flaps of the homodimer. While many mutations reduce the protease's affinity for inhibitors, others appear to enhance its catalytic efficiency. This high degree of genetic flexibility has made the protease an elusive drug target. The design of the next generation of HIV protease inhibitors will be discussed in light of the current structural information.

Counteracting HIV-1 protease drug resistance: structural analysis of mutant proteases complexed with XV638 and SD146, cyclic urea amides with broad specificities

The long-term therapeutic benefit of HIV antiretroviral therapy is still threatened by drug-resistant variants. Mutations in the S1 subsite of the protease are the primary cause for the loss of sensitivity toward many HIV protease inhibitors, including our first-generation cyclic urea-based inhibitors DMP323 and DMP450. We now report the structures of the three active-site mutant proteases V82F, I84V, and V82F/I84V in complex with XV638 and SD146, two P2 analogues of DMP323 that are 8-fold more potent against the wild type and are able to inhibit a broad panel of drug-resistant variants [Jadhav, P. K., et al. (1997) J. Med. Chem. 40, 181-191]. The increased efficacy of XV638 and SD146 is due primarily to an increase in P2-S2 interactions: 30-40% more van der Waals contacts and two to four additional hydrogen bonds. Furthermore, because these new interactions do not perturb other subsites in the protease, it appears that the large complementary surface areas of their P2 substituents compensate for the loss of P1-S1 interactions and reduce the probability of selecting for drug-resistant variants.

Resistance to HIV protease inhibitors: a comparison of enzyme inhibition and antiviral potency

Resistance of HIV-1 to protease inhibitors has been associated with changes at residues Val82 and Ile84 of HIV-1 protease (HIV PR). Using both an enzyme assay with a peptide substrate and a cell-based infectivity assay, we examined the correlation between the inhibition constants for enzyme activity (Ki values) and viral replication (IC90 values) for 5 active site mutants and 19 protease inhibitors. Four of the five mutations studied (V82F, V82A, I84V, and V82F/I84V) had been identified as conferring resistance during in vitro selection using a protease inhibitor. The mutant protease genes were expressed in Escherichia coli for preparation of enzyme, and inserted into the HXB2 strain of HIV for test of antiviral activity. The inhibitors included saquinavir, indinavir, nelfinavir, 141W94, ritonavir (all in clinical use), and 14 cyclic ureas with a constant core structure and varying P2, P2' and P3, P3' groups. The single mutations V82F and I84V caused changes with various inhibitors ranging from 0.3- to 86-fold in Ki and from 0.1- to 11-fold in IC90. Much larger changes compared to wild type were observed for the double mutation V82F/I84V both for Ki (10-2000-fold) and for IC90 (0.7-377-fold). However, there were low correlations (r2 = 0.017-0.53) between the mutant/wild-type ratio of Ki values (enzyme resistance) and the mutant/wild-type ratio of viral IC90 values (antiviral resistance) for each of the HIV proteases and the viruses containing the identical enzyme. Assessing enzyme resistance by "vitality values", which adjust the Ki values with the catalytic efficiencies (kcat/Km), caused no significant improvement in the correlation with antiviral resistance. Therefore, our data suggest that measurements of enzyme inhibition with mutant proteases may be poorly predictive of the antiviral effect in resistant viruses even when mutations are restricted to the protease gene.

Molecular recognition of cyclic urea HIV-1 protease inhibitors

As long as the threat of human immunodeficiency virus (HIV) protease drug resistance still exists, there will be a need for more potent antiretroviral agents. We have therefore determined the crystal structures of HIV-1 protease in complex with six cyclic urea inhibitors: XK216, XK263, DMP323, DMP450, XV638, and SD146, in an attempt to identify 1) the key interactions responsible for their high potency and 2) new interactions that might improve their therapeutic benefit. The structures reveal that the preorganized, C2 symmetric scaffolds of the inhibitors are anchored in the active site of the protease by six hydrogen bonds and that their P1 and P2 substituents participate in extensive van der Waals interactions and hydrogen bonds. Because all of our inhibitors possess benzyl groups at P1 and P1', their relative binding affinities are modulated by the extent of their P2 interactions, e.g. XK216, the least potent inhibitor (Ki (inhibition constant) = 4.70 nM), possesses the smallest P2 and the lowest number of P2-S2 interactions; whereas SD146, the most potent inhibitor (Ki = 0.02 nM), contains a benzimidazolylbenzamide at P2 and participates in fourteen hydrogen bonds and approximately 200 van der Waals interactions. This analysis identifies the strongest interactions between the protease and the inhibitors, suggests ways to improve potency by building into the S2 subsite, and reveals how conformational changes and unique features of the viral protease increase the binding affinity of HIV protease inhibitors.

Molecular basis of HIV-1 protease drug resistance: structural analysis of mutant proteases complexed with cyclic urea inhibitors

In cell cultures, the key residues associated with HIV-1 resistance to cyclic urea-based HIV-1 protease (PR) inhibitors are Val82 and Ile84 of HIV-1 PR. To gain an understanding of how these two residues modulate inhibitor binding, we have measured the Ki values of three recombinant mutant proteases, I84V, V82F, and V82F/I84V, for DMP323 and DMP450, and determined the three-dimensional structures of their complexes to 2.1-1.9 A resolution with R factors of 18.7-19.6%. The Ki values of these mutants increased by 25-, 0.5-, and 1000-fold compared to the wild-type values of 0.8 and 0.4 nM for DMP323 and DMP450, respectively. The wild-type and mutant complexes overall are very similar (rms deviations of 0.2-0.3 A) except for differences in the patterns of their van der Waals (vdw) interactions, which appear to modulate the Ki values of the mutants. The loss of the CD1 atom of Ile84, in the I84V mutant complexes, creates a hole in the S1 subsite, reducing the number of vdw contacts and increasing the Ki values. The V82F mutant binds DMP323 more tightly than wild type because the side chain of Phe82 forms additional vdw and edge-to-face interactions with the P1 group of DMP323. The Ki values of the single mutants are not additive because the side chain of Phe82 rotates out of the S1 subsite in the double mutant (the chi 1 angles of Phe82 and -182 in the V82F and V82F/I84V mutants differ by 90 and 185 degrees, respectively), further reducing the vdw interactions. Finally, compensatory shifts in the I84V and V82F/ I84V complexes pick up a small number of new contacts, but too few to offset the initial loss of interactions caused by the mutations. Therefore, our data suggest that variants persist in the presence of DMP323 and DMP450 because of a decrease in vdw interactions between the mutant proteases and inhibitors.