Note: Simple 100 Hz N2 laser with longitudinal discharge tube and high-voltage power supply using neon sign transformer

We developed a longitudinally excited N₂ laser with a simple driver circuit and a simple power supply. The N₂ laser consisted of a 20 cm-long glass tube with an inner diameter of 2.5 mm, a normal stable resonator formed by flat mirrors, a variable transformer, a neon sign transformer, a spark gap, and a 200 pF capacitance. The N₂ laser produced a laser pulse with an energy of 379 nJ and a pulse width of 7.5 ns at a repetition rate of 100 Hz. The laser beam was circular and had a Gaussian profile with a correlation factor of 0.992 93.

Short-pulse CO₂ laser with longitudinal tandem discharge tube

We developed a longitudinally excited CO2 laser with a tandem discharge tube. The tandem scheme was constituted of two 30-cm long discharge tubes connected with an intermediate electrode. Two parts, each consisting of a charged capacitance and a 30-cm long discharge tube, were electrically connected in parallel and switched by a spark gap. The tandem scheme produced a short laser pulse like that of a TEA-CO2 laser with a charging voltage of -24.8 kV, which was smaller than the -40.0 kV charging voltage of our previous CO2 laser. At a gas pressure of 3.8 kPa, the spike pulse width was 145 ns, the pulse tail length was 58.8 μs, the output energy was 52.0 mJ, and the spike pulse energy was 2.4 mJ. We also investigated the dependence of the laser pulse and the discharge voltage on gas pressure.

Note: Longitudinally excited N₂ laser with low beam divergence

We developed a longitudinally excited N2 laser (337 nm) with low beam divergence without collimator lenses. The N2 laser consisted of a 30 cm long Pyrex glass tube with an inner diameter of 2.5 mm, a normal stable resonator formed by flat mirrors, and a simple, novel driver circuit. At a N2 gas pressure of 0.4 kPa and a repetition rate of 40 Hz, the N2 laser produced a circular beam with an output energy of 2.6 μJ and a low full-angle beam divergence of 0.29 mrad due to the uniform discharge formed by the longitudinal excitation scheme, the long cavity with the small aperture, and the low-input energy oscillation.

Laser ablative shaping of plastic optical components for phase control

A new scheme for phase control of optical components with laser ablation has been developed. One can ablate the surface shape of optical plastic material coated on a glass plate by using 193-nm laser light to control the transmission wave front. The surface shape is monitored in situ and corrected to attain the desired aberration level. The irradiation fluence is approximately 40 mJ/cm(2), and the ablation depth/pulse is approximately 0.01 microm/pulse for UV-cured resin. A wave-front aberration of 3.0 lambda is reduced to 0.17 lambda for flat surface shaping. For spherical surface generation, an aberration of 2.5 lambda is reduced to 0.2 lambda. The increase in surface roughness is kept within acceptable levels.

Wave-front design algorithm for shaping a quasi-far-field pattern

To design a fully continuous wave-front distribution suitable for focused beam shaping by a deformable mirror, we modify the phase-retrieval algorithm by employing a uniformly distributed phase as a starting phase screen and spatial filtering for the near-field phase retrieved during the iteration process. A special phase unwrapping algorithm is not required to obtain a continuous phase distribution from the retrieved phase since the boundary of the 2pi-phase-jumped region in the designed phase distribution is perfectly closed. From the computational result producing a uniform square beam transformation from a circular defocused beam, this algorithm has provided a fully continuous wave-front distribution with a lower spatial frequency for a deformable mirror. The transformed square beam has a normalized intensity nonuniformity of varsigma(rms) = 0.14 with respect to a desired flat-topped square beam pattern. This beam-shaping method also provides a high energy-concentration rate of more than 98%.

High-aspect-ratio line focus for an x-ray laser by a deformable mirror

A high-aspect-ratio line focus is required on a plane target in x-ray laser experiments for obtaining a high gain-length product. Inherent wave-front aberrations in line-focusing optics, which consist of a cylindrical lens and a spherical lens, are discussed with respect to beam diameter. The nonuniformity of the linewidth that is due to the aberrations is also calculated by the ABCD matrix method. A deformable mirror of a continuous plate type with a diameter of 185 mm provides an adequate wave-front distribution for compensating for the wave-front aberration. The wave-front control by the deformable mirror realizes a fine linewidth of 25 microm and 18.2 mm long, corresponding to the aspect ratio of 728. The linewidth is three times the diffraction limit. The intensity distribution along the line focus is also improved.

Shack Hartmann wave-front measurement with a large F-number plastic microlens array

A new plastic microlens array, consisting of 900 lenslets, has been developed for the Shack Hartmann wave-front sensor.The individual lens is 300 µm × 300µm and has a focal length of 10 mm, which provides the same focal size, 60 µm in diameter, with a constant peak intensity. One can improve thewave-front measurement accuracy by reducing the spot centroiding error by averaging a few frame memories of an image processor. A deformable mirror for testing the wave-front sensor gives anappropriate defocus and astigmatism, and the laser wave front is measured with a Shack Hartmann wave-front sensor. The measurement accuracy and reproducibility of our wave-front sensor are better than λ/20 and λ/50 (λ = 632.8 nm),respectively, in rms.