Exploration of potential novel drug targets for diabetic retinopathy by plasma proteome screening

The aim of this study is to identify novel potential drug targets for diabetic retinopathy (DR). A bidirectional two-sample Mendelian randomization (MR) analysis was performed using protein quantitative trait loci (pQTL) of 734 plasma proteins as the exposures and clinically diagnosed DR as the outcome. Genetic instruments for 734 plasma proteins were obtained from recently published genome-wide association studies (GWAS), and external plasma proteome data was retrieved from the Icelandic Decoding Genetics Study and UK Biobank Pharma Proteomics Project. Summary-level data of GWAS for DR were obtained from the Finngen Consortium, comprising 14,584 cases and 202,082 population controls. Steiger filtering, Bayesian co-localization, and phenotype scanning were used to further verify the causal relationships calculated by MR. Three significant (p < 6.81 × 10-5) plasma protein-DR pairs were identified during the primary MR analysis, including CFH (OR = 0.8; 95% CI 0.75-0.86; p = 1.29 × 10-9), B3GNT8 (OR = 1.09; 95% CI 1.05-1.12; p = 5.9 × 10-6) and CFHR4 (OR = 1.11; 95% CI 1.06-1.16; p = 1.95 × 10-6). None of the three proteins showed reverse causation. According to Bayesian colocalization analysis, CFH (coloc.abf-PPH4 = 0.534) and B3GNT8 (coloc.abf-PPH4 = 0.638) in plasma shared the same variant with DR. All three identified proteins were validated in external replication cohorts. Our research shows a cause-and-effect connection between genetically determined levels of CFH, B3GNT8 and CFHR4 plasma proteins and DR. The discovery implies that these proteins hold potential as drug target in the process of developing drugs to treat DR.

The usage and costs of national drug price-negotiated anticancer medicines in a first-tier city in Northeast China: a study based on health insurance data

BACKGROUND

The National Drug Price Negotiation (NDPN) policy has entered a normalisation stage, aiming to alleviate, to some extent, the disease-related and economic burdens experienced by cancer patients. This study analysed the use and subsequent burden of anticancer medicines among cancer patients in a first-tier city in northeast China.

METHODS

We assessed the usage of 64 negotiated anticancer medicines using the data on the actual drug deployment situation, the frequency of medical insurance claims and actual medication costs. The affordability of these medicines was measured using the catastrophic health expenditure (CHE) incidence and intensity of occurrence. Finally, we used the defined daily doses (DDDs) and defined daily doses cost (DDDc) as indicators to evaluate the actual use of these medicines in the region.

RESULTS

During the study period, 63 of the 64 medicines were readily available. From the perspective of drug usage, the frequency of medical insurance claims for negotiated anticancer medicines and medication costs showed an increasing trend from 2018 to 2021. Cancer patients typically sought medical treatment at tertiary hospitals and purchased medicines at community pharmacies. The overall quantity and cost of medications for patients covered by the Urban Employee Basic Medical Insurance (UEBMI) were five times higher than those covered by the Urban and Rural Resident Medical Insurance (URRMI). The frequency of medical insurance claims and medication costs were highest for lung and breast cancer patients. Furthermore, from 2018 to 2021, CHE incidence showed a decreasing trend (2.85-1.60%) under urban patients' payment capability level, but an increasing trend (11.94%-18.42) under rural patients' payment capability level. The average occurrence intensities for urban (0.55-1.26 times) and rural (1.27-1.74 times) patients showed an increasing trend. From the perspective of drug utilisation, the overall DDD of negotiated anticancer medicines showed an increasing trend, while the DDDc exhibited a decreasing trend.

CONCLUSION

This study demonstrates that access to drugs for urban cancer patients has improved. However, patients' medical behaviours are affected by some factors such as hospital level and type of medical insurance. In the future, the Chinese Department of Health Insurance Management should further improve its work in promoting the fairness of medical resource distribution and strengthen its supervision of the nation's health insurance funds.

Migrating foreign bodies of penis: a case report and literature review

BACKGROUND

Only a few cases have been reported about active foreign body implantation in the cavernous body of the penis.

CASE PRESENTATION

A 47-year-old man inserted two needles from the glans penis into the bilateral penile sponge body. Subsequently, two needles migrated through the penile cavernous body into the pelvic cavity. Attempts to remove the needles through the penis were unsuccessful. Eventually, after a duration exceeding one month, the displaced needles were removed in stages from the buttocks.

CONCLUSION

A few cases of intracavernosal-injection-therapy-associated needle breakage and retention have been reported globally. And this is the first case in China documenting the migration of foreign bodies within the penile region. In this condition, it is of utmost importance to engage the expertise of experienced andrologists to minimize the risk of excessive manipulation, thereby ensuring that inadvertent deep penetration of the needle into the penile tissue is prevented. In case the foreign body has migrated deeper into the tissues and the patient does not exhibit any specific symptoms or risks of macrovascular injury-related bleeding, close surveillance of its movement can be implemented. Surgical intervention can be initiated once the foreign body has reached a suitable position. Moreover, a psychiatric evaluation should be recommended for patient to discover any underlying mental health disorders.

Numerical simulation of rock blasting under different in-situ stresses and joint conditions

High primary rock stress can limit the generation of rock cracks caused by blasting, and blasting usually shows different rock breaking states under different primary rock stress conditions. There are a large number of naturally formed joints in rock mass, due to the limitations of laboratory tests, a numerical model of jointed rock mass was established using LS-DYNA software to investigate the evolution of blasting damage under various in-situ stresses and open joints. In this simulation, using the Lagrange-Euler (ALE) procedure and the equation of state (JWL) that defines explosive materials, the study considered different joint thicknesses (2cm, 4cm, and 6cm), joint angles (0°, 30°, 60°, and 90°), and in-situ stress conditions (lateral stress coefficients of 0.5, 1, and 2, with vertical in-situ stresses of 10MPa and 20MPa), through stress analysis and damage area comparison, the relationship between damage crack propagation and horizontal and vertical stress difference is explored. The research aimed to understand the mechanisms underlying crack initiation and propagation. The results show that: (1) The presence of joints exerts a barrier effect on the expansion and penetration of cracks. When explosion stress waves reach the joint surface, their propagation is impeded, leading to the diffusion of wing cracks at the joint ends. When the lateral stress coefficient and joint angle are the same, an increase in initial in-situ stress results in a reduction in the area of the blasting damage zone. (2) Under the same initial in-situ stress conditions, the area of the blasting damage zone initially increases and then decreases with an increasing joint angle. However, it remains larger than that without a joint, and there exists an optimal angle that maximizes the damage area. In the simulated conditions, the area of damage cracks is greatest when the joint angle is 60° dip angle. (3) The presence of initial in-situ stress has a certain impact on the initiation and expansion of blasting cracks. The degree and nature of this influence are not solely related to the lateral stress coefficient but also depend on the joint's angle and thickness. When in-situ stress is present, the initial in-situ stress field's pressure is not conducive to the initiation and propagation of blasting cracks. However, the existence of a joint has a noticeable guiding and promoting effect on crack propagation, and the pattern of crack propagation is influenced by both joint and in-situ stress conditions.

A Study on the Effect and Suppression of Hydrogen Permeation Behavior on the Friction Characteristics of PEEK/PTFE Composites via Molecular Dynamics Simulation

To research the effect of hydrogen permeation on the friction characteristics of the seal materials on the hydrogen equipment, the molecular models of 10% PEEK/PTFE composites and its frictional models were established, respectively, and molecular dynamics (MDs) and giant canonical Monte Carlo (GCMC) methods were used to simulate the diffusion coefficient, dissolution coefficient and permeability coefficient of the hydrogen in PEEK/PTFE composites. The effect of a different amount of hydrogen on the friction and wear of PEEK/PTFE composites was also studied. The results showed that few permeations of the hydrogen gas mainly demonstrated having a positive effect on the surface of the PEEK/PTFE composites, and the wear rate of the PEEK/PTFE composites showed a slight decreasing trend. The wear rate of the PEEK/PTFE composites gradually decreased when more hydrogen molecules penetrated the matrix. With the further penetration of the hydrogen molecules, the wear rate and friction coefficient of the PEEK/PTFE composites rapidly increased, showing a negative effect. With the further penetration of the hydrogen molecule, the friction coefficient of the composite displayed a small fluctuation and then a rapid decreasing trend. Meanwhile, effective improvement measures were proposed, and the introduction of the graphene was verified to be effective to reduce the negative effect of the hydrogen permeation, thereby improving the friction performance of the PEEK/PTFE composites.

Experimental study on the treatment of AMD by SRB immobilized particles containing "active iron" system

The inhibition and toxicity of high acidity and heavy metals on sulfate-reducing bacteria in acid mine drainage (AMD) were targeted. Highly active SRB immobilized particles were prepared using SRB, warm sticker wastes (iron powders), corncobs, and Maifan stones as the main matrix materials, employing microbial immobilization technology. The repair ability and reusability of highly active immobilized particles for AMD were explored. The results indicate that the adaptability of immobilized particles to AMD varied under different initial conditions, such as pH, Mn2+, and SO42-. The adsorption process of immobilized particles on Mn2+ follows the quasi-second-order kinetic model, suggesting that it involves both physical and chemical adsorption. The maximum adsorption capacity of immobilized particles for Mn2+ is 3.878 mg/g at a concentration of 2.0 mg/L and pH 6. On the other hand, the reduction process of immobilized particles on SO42- adheres to the first-order reaction kinetics, indicating that the reduction of SO42- is primarily driven by the dissimilation reduction of SRB. The maximum reduction rate of SO42- by immobilized particles is 94.23% at a concentration of 800 mg/L and pH 6. A layered structure with a flocculent appearance formed on the surface of the immobilized particles. The structure's characteristics were found to be consistent with sulfate green rust (FeII4FeIII2(OH)12SO4·8H2O). The chemisorption, ion exchange, dissimilation reduction, and surface complexation occurring between the matrices in the immobilized particles can enhance the alkalinity of AMD and decrease the concentration of heavy metals and sulfates. These results are expected to offer novel insights and materials for the treatment of AMD using biological immobilization technology, as well as improve our understanding of the mechanisms behind biological and abiotic enhanced synergistic decontamination.

Structure Design and Characterization of 3D Printing System of Thermal Battery Electrode Ink Film

In this paper, a 3D printing system for a thermal battery electrode ink film is set up and investigated based on the on-demand microdroplet ejection technology. The optimal structural dimensions of the spray chamber and metal membrane of the micronozzle are determined via simulation analysis. The workflow and functional requirements of the printing system are set up. The printing system includes a pretreatment system, piezoelectric micronozzle, motion control system, piezoelectric drive system, sealing system, and liquid conveying system. Different printing parameters are compared to obtain optimized printing parameters, which can be attributed to the optimal pattern of the film. The feasibility and controllability of 3D printing methods are verified by printing tests. The size and output speed of the droplets can be controlled by adjusting the amplitude and frequency of the driving waveform acting on the piezoelectric actuator. So, the required shape and thickness of the film can be achieved. An ink film in terms of nozzle diameter = 0.6 mm, printing height = 8 mm, wiring width = 1 mm, input voltage = 3 V and square wave signal frequency = 35 Hz can be achieved. The electrochemical performance of thin-film electrodes is crucial in thermal batteries. The voltage of the thermal battery reaches its peak and tends to flatten out at around 100 s when using this printed film. The electrical performance of the thermal batteries using the printed thin films is found to be stable. This stabilized voltage makes it applicable to thermal batteries.

Fermented Sargassum fusiforme Mitigates Ulcerative Colitis in Mice by Regulating the Intestinal Barrier, Oxidative Stress, and the NF-κB Pathway

In recent years, Sargassum fusiforme has gained increasing attention for its ability to improve human health and reduce the risk of disease. Nevertheless, there have been few reports on the beneficial functions of fermented Sargassum fusiforme. In this study, the role of fermented Sargassum fusiforme in the mitigation of ulcerative colitis was investigated. Both fermented and unfermented Sargassum fusiforme demonstrated significant improvement in weight loss, diarrhea, bloody stools, and colon shortening in mice with acute colitis. Fermented Sargassum fusiforme further protected against goblet cell loss, decreased intestinal epithelium permeability, and enhanced the expression of tight junction proteins. Fermented Sargassum fusiforme reduced oxidative stress, which was demonstrated by a decrease in nitric oxide (NO), myeloperoxidase (MPO), and malondialdehyde (MDA) concentrations in the colon of mice and an increase in total superoxide dismutase (T-SOD) activity in the colon. Meanwhile, catalase (CAT) concentrations in both the colon and serum of mice were significantly increased. Fermented Sargassum fusiforme also attenuated the inflammatory response, which was evidenced by the decreased level of pro-inflammatory cytokines in the colon. Moreover, fermented Sargassum fusiforme inhibited the nuclear factor-κB (NF-κB) signaling pathway and increased the production of short-chain fatty acids in the intestine. These findings indicate that fermented Sargassum fusiforme may have the potential to be developed as an alternative strategy for alleviating colitis.

Research on fault diagnosis system for belt conveyor based on internet of things and the LightGBM model

As an equipment failure that often occurs in coal production and transportation, belt conveyor failure usually requires many human and material resources to be identified and diagnosed. Therefore, it is urgent to improve the efficiency of fault identification, and this paper combines the internet of things (IoT) platform and the Light Gradient Boosting Machine (LGBM) model to establish a fault diagnosis system for the belt conveyor. Firstly, selecting and installing sensors for the belt conveyor to collect the running data. Secondly, connecting the sensor and the Aprus adapter and configuring the script language on the client side of the IoT platform. This step enables the collected data to be uploaded to the client side of the IoT platform, where the data can be counted and visualized. Finally, the LGBM model is built to diagnose the conveyor faults, and the evaluation index and K-fold cross-validation prove the model's effectiveness. In addition, after the system was established and debugged, it was applied in practical mine engineering for three months. The field test results show: (1) The client of the IoT can well receive the data uploaded by the sensor and present the data in the form of a graph. (2) The LGBM model has a high accuracy. In the test, the model accurately detected faults, including belt deviation, belt slipping, and belt tearing, which happened twice, two times, one time and one time, respectively, as well as timely gaving warnings to the client and effectively avoiding subsequent accidents. This application shows that the fault diagnosis system of belt conveyors can accurately diagnose and identify belt conveyor failure in the coal production process and improve the intelligent management of coal mines.

Development law and growth model of dynamic pore water pressure of tailings under different consolidation conditions

Tailings dams are in danger of liquefaction during earthquakes. The liquefaction process can be indirectly reflected by the evolution rule of the dynamic pore water pressure. To study the development law of dynamic pore water pressure of tailing sand under different consolidation conditions, the evolution equation of critical dynamic pore water pressure of tailings under isotropic and anisotropic consolidation conditions was derived based on the limit equilibrium theory. Moreover, the development law of dynamic pore water pressure was expounded theoretically. The dynamic triaxial tests of tailing silty sand and tailing silt under different dry densities, consolidation ratios, and confining pressures were performed. The dynamic pore water pressure ratio and vibration ratio curves of tailings under isotropic and anisotropic consolidation were analyzed, and a dynamic pore water pressure growth index model suitable for both isotropic and anisotropic consolidation was derived. The results showed that the critical dynamic pore water pressure was positively correlated with the confining pressure and average particle size of tailings under isotropic consolidation conditions. The tailings have a limit dynamic effective internal friction angle [Formula: see text] under the anisotropic consolidation condition. The evolution law of critical dynamic pore water pressure can be judged according to the dynamic effective internal friction angle of tailing sand φd and [Formula: see text] values. The consolidation ratio significantly affects the dynamic pore pressure growth curve while confining pressure and dry density do not. For different tailing materials, the dynamic pore water pressure ratio is positively correlated with tailing particles. The dynamic pore water pressure growth process of tailing silty sand and tailing silt can be divided into two stages: rapid and stable growths. The development law of two types of tailings can be described by the dynamic pore water pressure growth index model. The research results can provide a theoretical basis for the seismic design of tailings dams in practical engineering.

Electrospinning of antibacterial and anti-inflammatory Ag@hesperidin core-shell nanoparticles into nanofibers used for promoting infected wound healing

Bacterial infection and excessive inflammation are still the main obstacles to wound repair. Thus, antibacterial and anti-inflammation nanomaterials are always attracting for infected wound healing. In this work, ultra-uniform (∼20 nm) and colloidally stable Ag nanoparticles (Ag-Hes NPs) with core-shell structure were prepared by using hesperidin as reducing and caping agent. The obtained Ag-Hes NPs present effective antibacterial properties on both S. aureus and E. coli. Ag-Hes NPs also got high DPPH (1,1-Diphenyl-1-picrylhydrazyl) scavenging capability of 69%. Under the package of polyvinyl alcohol and sodium alginate, Ag-Hes NPs were encapsulated into electro spun nanofibers to form hydrogel (Ag-Hes@H). This strategy provides a moisture environment which could enrich and release Ag-Hes NPs gradually. Cell experiments and animal wound healing investigation proved that Ag-Hes@H could promote the proliferation and migration of HUVECS cells and accelerate infected wound healing. Meanwhile, Ag-Hes@H significantly reduced the expression of inflammatory cytokines, including IL-6, MMP9, and TNF-α. Immunohistochemistry data further suggested that Ag-Hes@H accelerated wound closure by promoting collagen deposition and skin cell proliferation. The designed antibacterial and anti-inflammatory Ag-Hes@H has great potential for promoting infected wound healing.