Algae-containing raw water treatment and by-products control based on ClO2 preoxidation-assisted coagulation/precipitation process

Eutrophication has become a great concern in recent years with the algae blooms in source water resulting in a serious threat posing to the safety of drinking water. Chlorine dioxide (ClO₂) has been served as an alternative oxidant for preoxidation or disinfection during drinking water treatment process due to its high oxidation efficiency and low risk of organic by-products formation. However, the generation of inorganic by-products including chlorite (ClO₂^-) and chlorate (ClO₃^-) has become a potential problem when applied in drinking water treatment. In this study, ClO₂ preoxidation-assisted coagulation/precipitation process was applied to improve the raw water quality, especially algae, turbidity, chemical oxygen demand (COD_Mn), and UV₂₅₄, and explore the formation mechanisms of inorganic by-products. It was found that the polymeric aluminum chloride (PAC) and ClO₂ have shown the best raw water treatment performance with the optimal dosage of 10 mg/L and 0.8 mg/L, respectively. Moreover, the initial pH also has exhibited a notable influence on pollutants treatment and by-products generation. Due to the adverse influence of algae and natural organic matters (NOM) and the generation of by-products, it was significant to investigate their inhibition effect on the water quality and the production of ClO₂^- and ClO₃^- in the ClO₂ preoxidation-assisted coagulation/precipitation process. Moreover, it was applicable of this process to apply for the algae-containing raw water (calculated as Chl.a lower than 50 μg/L) treatment with the ClO₂ dosage of less than 0.8 mg/L to achieve optimum treatment performance and minimum by-products generation.