Continuous and controllable synthesis of MnO2 adsorbents for H2S removal at low temperature

H2S is an extremely noxious impurity generated from nature and chemical industrial processes. High performing H2S adsorbents are required for chemical industry and environmental engineering. Herein, α-, γ-, and δ-MnO2 adsorbents with high sulfur capacity were synthesized through a continuous-flow approach with a microreactor system, achieving much higher efficiency than hydrothermal methods. The relationship between crystal structure and synthesis conditions such as residence time, reaction temperature, concentration of K+ in solution and reactant ratio is discussed. According to the H2S breakthrough tests at 150 °C, continuously prepared α-, γ-, and δ-MnO2 exhibited sulfur capacities of 669.5, 193.8 and 607.6 mg S/g sorbent, respectively, which was at a high level among the reported adsorbents. Such enhanced performance is related to the large surface area and mesopore volume, high reducibility, and a large number of oxygen species with high reactivity and mobility. Manganese sulfide and elemental sulfur were formed after desulfurization, which indicated the reaction consisted of two steps: redox and sulfidation of the sorbents. This study provides an innovative design strategy for the construction of nanomaterials with high H2S adsorption performances.

Investigation of Cu-Mn catalytic ozonation of toluene: Crystal phase, intermediates and mechanism

The effect of different crystal phases, i.e. spinel phase (CuMn₂O₄) and amorphous phase (Cu_0.2MnO_x), was explored in Cu-Mn catalytic ozonation of toluene. The toluene removal efficiency followed the order of Cu_0.2MnO_x (91.2%) ˃ CuMn₂O₄ (74.5%) ˃ commercial catalyst Cu_0.3MnO_x (70.3%) in 130 min, and the higher CO₂ yield (67.6%) could be also observed using Cu_0.2MnO_x. In order to investigate the effect of phases on the toluene degradation pathway, the intermediates and byproducts were identified by DRIFTS, GC-MS, and TOF-SIMS. No obvious difference was observed in the distribution of byproducts, except for the quantities, suggesting the discrepancy of oxidation rate. On the other hand, the catalysts were characterized before and after the ozonation process by TEM, BET, XPS, XRD, EPR, TGA, and TPR. It was proposed that for amorphous catalysts, the oxygen vacancy (V_o) helped the chemisorption of toluene, and adjacent Mn reacted as the main active site for the ozonation process. While, the redox pair of Cu⁺/Mn⁴⁺ and Cu²⁺/(Mn³⁺, Mn²⁺) in the spinel phase plays an important role in the generation of oxygen vacancies for O₃ decomposition.

TiO2 nanostructures with different crystal phases for sensitive acetone gas sensors

Gas sensors have become increasingly significant because of the rapid development in electronic devices that are applied in detecting noxious gases. Adjusting the crystal phase structure of sensing materials can optimize the band gap and oxygen-adsorptive capacity, which influences the gas sensing characteristics. Therefore, titanium dioxide (TiO₂) materials with different crystal phase structures including rutile TiO₂ nanorods (R-TiO₂ NRs), anatase TiO₂ nanoparticles (A-TiO₂ NRs) and brookite TiO₂ nanorods (B-TiO₂ NRs) were synthesized successfully via one-step hydrothermal process, respectively. The gas sensing characteristics were also investigated systematically. The sensors based on R-TiO₂ NRs displayed the higher response value (12.3) to 100 ppm acetone vapor at 320 °C compared to A-TiO₂ NRs (4.1) and B-TiO₂ NRs (2.3). Furthermore, gas sensors based on R-TiO₂ NRs exhibited excellent repeatability under six cycles and good selectivity to acetone. The outstanding sensing properties of gas sensors based on R-TiO₂ NRs can be ascribed to relatively narrow band gap and more oxygen vacancies of rutile phase, which showed a probable way for design gas sensors based on metal oxide semiconductors with remarkable gas sensing performances by the crystal phase adjustment engineering in the future.

Engineering of crystal phase over porous MnO2 with 3D morphology for highly efficient elimination of H2S

In the present work, we report a facile oxalate-derived hydrothermal method to fabricate α-, β- and δ-MnO₂ catalysts with hierarchically porous structure and study the phase-dependent behavior for selective oxidation of H₂S over MnO₂ catalysts. It was disclosed that the oxygen vacancy, reducibility and acid property of MnO₂ are essentially determined by the crystalline phase. Systematic experiments demonstrate that δ-MnO₂ is superior in active oxygen species, activation energy and H₂S adsorption capacity among the prepared catalysts. As a consequence, δ-MnO₂ nanosphere with a hierarchically porous structure shows high activity and stability with almost 100% H₂S conversion and sulfur selectivity at 210 °C, better than majority of reported Mn-based materials. Meanwhile, hierarchically porous structure of δ-MnO₂ nanosphere alleviates the generation of by-product SO₂ and sulfate, promoting the adoptability of Mn-based catalysts in industrial applications.

Low-temperature degradation of high-strength Y-TZP (yttria-stabilized tetragonal zirconia polycrystal)

The objective of this study was to investigate the low temperature degradation characteristics of 2 types of high strength yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) in order to evaluate its suitability for implant body, implant superstructure or abutment. Disk-shaped conventional Y-TZP (0.25 mass% alumina) subjected to hot isostatic press treatment (HIP-Y-TZP) and Y-TZP/4Al₂O₃ with additional alumina (4.0 mass%) were mirror-polished. Accelerated aging tests with 134°C for 5 h at 0.2 MPa and 180°C for 5 h at 1.0 MPa were performed using an autoclave. Biaxial flexural strength and crystal phases were evaluated. Strength decreased as the proportion of monoclinic phase increased after accelerated aging treatment for both types of high-strength Y-TZPs. Despite the low alumina content, HIP-Y-TZP showed higher static strength and strength after accelerated aging treatment compared to Y-TZP/4Al₂O₃. However, both types of Y-TZP had adequate strength to be used as dental restorations even after accelerated aging treatment, therefore, its clinical suitability was considered high.

Effects of physicochemical properties of TiO2 nanomaterials for pulmonary inflammation, acute phase response and alveolar proteinosis in intratracheally exposed mice

Nanomaterial (NM) characteristics may affect the pulmonary toxicity and inflammatory response, including specific surface area, size, shape, crystal phase or other surface characteristics. Grouping of TiO₂ in hazard assessment might be challenging because of variation in physicochemical properties. We exposed C57BL/6 J mice to a single dose of four anatase TiO₂ NMs with various sizes and shapes by intratracheal instillation and assessed the pulmonary toxicity 1, 3, 28, 90 or 180 days post-exposure. The quartz DQ12 was included as benchmark particle. Pulmonary responses were evaluated by histopathology, electron microscopy, bronchoalveolar lavage (BAL) fluid cell composition and acute phase response. Genotoxicity was evaluated by DNA strand break levels in BAL cells, lung and liver in the comet assay. Multiple regression analyses were applied to identify specific TiO₂ NMs properties important for the pulmonary inflammation and acute phase response. The TiO₂ NMs induced similar inflammatory responses when surface area was used as dose metrics, although inflammatory and acute phase response was greatest and more persistent for the TiO₂ tube. Similar histopathological changes were observed for the TiO₂ tube and DQ12 including pulmonary alveolar proteinosis indicating profound effects related to the tube shape. Comparison with previously published data on rutile TiO₂ NMs indicated that rutile TiO₂ NMs were more inflammogenic in terms of neutrophil influx than anatase TiO₂ NMs when normalized to total deposited surface area. Overall, the results suggest that specific surface area, crystal phase and shape of TiO₂ NMs are important predictors for the observed pulmonary effects of TiO₂ NMs.