Enhancing oxygen reduction reaction performance through eco-friendly chitosan gel-assisted molten salt strategy: Small NiCo alloy nanoparticles decorated with high-loading single Fe-NX

We developed an effective and eco-friendly strategy using chitosan gel-molten salt to achieve high loading (2.23 At. %) of single Fe-NX as assistive active sites. These sites were combined with small NiCo alloy NPs distributed on porous carbon aerogels to boost the ORR performance. The FeSAs-NiCo alloy@N-C sphere exhibits exceptional mass activity and specific activity of 3.705 A.mg-1 and 8.79 mA.cm-2(ECSA), respectively, at 0.85 V versus RHE. It has a superior onset potential of 1.08 V versus RHE, surpassing that of its nanoparticle Fe counterpart and NiCo alloy@N-C sphere. The significant improvement in ORR performance of the FeSAs-NiCo alloy@N-C sphere could be attributed to the positive effects of increased lattice strain due to the single atoms of Fe-NX hybridized with small NiCo alloy NPs. The chitosan gel-assisted molten salt strategy and assistive active sites of Fe-NX hybridized with NiCo alloy NPs regulate the electronic properties of the FeSAs-NiCo alloy@N-C sphere, both geometrically via lattice strain mismatch and electronically through shifting of the d-band center. This could influence the binding energies for oxygen and/or oxygen reduction intermediate adsorption/desorption. The additional improvement in the ORR performance of the FeSAs-NiCo alloy@N-C sphere also benefits from having a lower electrochemical activation energy.

Electronic Modulation in Cu Doped NiCo LDH/NiCo Heterostructure for Highly Efficient Overall Water Splitting

Layered double hydroxides (LDHs), promising bifunctional electrocatalysts for overall water splitting, are hindered by their poor conductivity and sluggish electrochemical reaction kinetics. Herein, a hierarchical Cu-doped NiCo LDH/NiCo alloy heterostructure with rich oxygen vacancies by electronic modulation is tactfully designed. It extraordinarily effectively drives both the oxygen evolution reaction (151 mV@10 mA cm-2 ) and the hydrogen evolution reaction (73 mV@10 mA cm-2 ) in an alkaline medium. As bifunctional electrodes for overall water splitting, a low cell voltage of 1.51 V at 10 mA cm-2 and remarkable long-term stability for 100 h are achieved. The experimental and theoretical results reveal that Cu doping and NiCo alloy recombination can improve the conductivity and reaction kinetics of NiCo LDH with surface charge redistribution and reduced Gibbs free energy barriers. This work provides a new inspiration for further design and construction of nonprecious metal-based bifunctional electrocatalysts based on electronic structure modulation strategies.

Insight into Electrochemical Performance of Nitrogen-Doped Carbon/NiCo-Alloy Active Nanocomposites

Nanocomposites containing Ni or Co or NiCo alloy and nitrogen-doped carbon with diverse ratios have been prepared and utilized as active elements in supercapacitors. The atomic contents of nitrogen, nickel, and cobalt have been adjusted by the supplement amount of Ni and Co salts. In virtue of the excellent surface groups and rich redox active sites, the NC/NiCo active materials exhibit superior electrochemical charge-storage performances. Among these as-prepared active electrode materials, the NC/NiCo1/1 electrode performs better than other bimetallic/carbon electrodes and pristine metal/carbon electrodes. Several characterization methods, kinetic analyses, and nitrogen-supplement strategies determine the specific reason for this phenomenon. As a result, the better performance can be ascribed to a combination of factors including the high surface area and nitrogen content, proper Co/Ni ratio, and relatively low average pore size. The NC/NiCo electrode delivers a maximum capacity of 300.5 C g^-1 and superior capacity retention of 92.30% after 3000 unceasing charge-discharge cycles. After assembling it into the battery-supercapacitor hybrid device, a high energy density of 26.6 Wh kg^-1 (at 412 W kg^-1 ) is achieved, comparable to the recent reports. Furthermore, this device can also power four light-emitting-diode (LED) demos, suggesting the potential practicability of these N-doped carbon compositing with bimetallic materials.

NiCo alloy/C nanocomposites derived from a Ni-doped ZIF-67 for lightweight microwave absorbers

In this work, we prepared NiCo alloy/C with rhombic dodecahedron structure and superior microwave absorption performance by using ZIF-67 as the raw material. The rhombic dodecahedron NiCo alloy/C was with rough particles on the surface was photographed by field emission scanning electron microscopy. By adjusting the doping amount of Ni and the temperature of pyrolysis, improved the impedance matching of NiCo alloy/C. Specifically, NiCo alloy/C exhibits a minimum reflection loss of -65.48 dB at 13.48 GHz, while the thickness is 1.63 mm. Defects introduced in the Ni doping process and the special rhombic dodecahedral structure can cause multiple loss mechanisms. Therefore, this NiCo alloy/C composite has the potential to be a potential microwave absorber material with lightweight and high microwave absorption properties.

Mesoporous NiCo alloy/reduced graphene oxide nanocomposites as efficient hydrogen evolution catalysts

Water electrolysis is a clean and efficient route for producing high-purity hydrogen. Developing highly efficient, stable and inexpensive electrocatalysts to replace Pt is currently a major challenge for the widespread application of water splitting. Herein, we report a facile and novel strategy for the synthesis of mesoporous NiCo alloy nanoparticle/reduced graphene oxide (MNiCo/rGO) composites via electroless deposition technique. Owing to the synergistic interaction of Ni and Co, the mesoporous structure of NiCo alloy, and the optimized combination of the mesoporous NiCo with rGO, the obtained optimal MNi₆₃Co₃₇/rGO₅ catalyst exhibits outstanding electrocatalytic performance for hydrogen evolution reaction (HER) with a low overpotential of 115 mV to reach the current density of 10 mA cm^-2, and a small Tafel slope of 45 mV dec^-1, as well as a high durability in alkaline solution. These remarkable merits make it a favorable alternative to noble metal Pt-based catalysts for HER, thereby further promoting the development of non-noble metal electrocatalysts.

NixCoy Nanocatalyst Supported by ZrO2 Hollow Sphere for Dry Reforming of Methane: Synergetic Catalysis by Ni and Co in Alloy

Ni_xCo_y/H-ZrO₂ catalysts composed of highly dispersed Ni_xCo_y nanoparticles supported by mesoporous ZrO₂ hollow sphere are synthesized by templating and impregnation processes. According to thermogravimetric analysis, X-ray photoelectron spectroscopy, and dry reforming results, a synergetic reaction mechanism is proposed to explain the better performance of alloy catalysts compared to Ni/H-ZrO₂ or Co/H-ZrO₂. In dry reforming of methane (DRM) reaction, Ni and Co act as catalysts for CH₄ cracking and CO₂ reduction, respectively, and the induced carbon deposits on Ni can be oxidized by the active oxygen left on Co, which regenerate the metal surface for the following reaction. Among all the alloy catalysts, the Ni_0.8Co_0.2/H-ZrO₂ catalyst presents the highest activity and stability because the strong metal-support interaction prevents the sintering of nanocatalysts at high temperature and the hollow structure enhances the mass transportation of reactants and products. More importantly, Ni and Co can synergistically balance the speed of CH₄ cracking and CO₂ reduction, which effectively avoid coke accumulation/catalyst oxidation and ensure fast and stable conversion for DRM reaction.

Novel Hydrogel-Derived Bifunctional Oxygen Electrocatalyst for Rechargeable Air Cathodes

The commercialization of Zn-air batteries has been impeded by the lack of low-cost, highly active, and durable catalysts that act independently for oxygen electrochemical reduction and evolution. Here, we demonstrate excellent performance of NiCo nanoparticles anchored on porous fibrous carbon aerogels (NiCo/PFC aerogels) as bifunctional catalysts toward the Zn-air battery. This material is designed and synthesized by a novel K₂Ni(CN)₄/K₃Co(CN)₆-chitosan hydrogel-derived method. The outstanding performance of NiCo/PFC aerogels is confirmed as a superior air-cathode catalyst for a rechargeable Zn-air battery. At a discharge-charge current density of 10 mA cm^-2, the NiCo/PFC aerogels enable a Zn-air battery to cycle steadily up to 300 cycles for 600 h with only a small increase in the round-trip overpotential, notably outperforming the more costly Pt/C+IrO₂ mixture catalysts (60 cycles for 120 h). With the simplicity of the synthetic method and the outstanding electrocatalytic performance, the NiCo/PFC aerogels are promising electrocatalysts for Zn-air batteries.