Investigation of a lignocellulose fiber hornification treatment for improving the functionality of apple pomace-based pulp for molded pulp packaging

Transfer molded pulp packaging (TMPP) is a viable alternative to single use plastic packaging. TMPP is typically produced from recycled newspapers, but the availability of this feedstock material is declining. Apple pomace (AP) pulp, primarily composed of cellulose, hemicellulose, lignin, and pectin, can be used as the primary component of TMPP, but its high water retention value (WRV) and separation from other pulps (recycled cardboard (CB) in this study) limits its utilizations in TMPP. A pressing and thermal drying cellulose hornification treatment followed by a repulping step was implemented to reduce pulp WRV and enhance AP and CB fiber entanglements. 11 %, 20 %, and 25 % reductions in WRV were achieved through 1 t-force pressing and drying at 120 °C for 2.5, 15, or 27.5 min, named mild, medium, and strong hornification treatments, respectively. Increased AP and CB fiber entanglements were observed via microscopy with rising hornification drying times. The medium hornification treatment was identified as the optimal treatment for reducing pulp WRV and reducing pulp separation without decreasing pulp sheet tensile strength. This study introduced and validated a novel processing technique for improved functionality of AP-based pulp for packaging applications.

Characterizing lignin-containing microfibrillated cellulose based on water interactions, fibril properties, and imaging

Morphological characterization of microfibrillated cellulose (MFC) is critically important to process control in production and product specification for trade and product development yet is extremely difficult. This study evaluated several indirect methods for relative comparison of the morphology of lignin-free and lignin-containing ((L)MFCs). The (L)MFCs studied were produced using a commercial grinder through different passes from a dry lap bleached kraft eucalyptus pulp, a virgin mixed (maple and birch) unbleached kraft hardwood pulp, and two virgin-unbleached kraft softwood (loblolly pine) pulps with one bleachable grade (low lignin content) and one liner grade (high lignin content). The (L)MFCs were indirectly characterized using techniques based on water interactions, i.e., water retention value (WRV) and fibril suspension stability, as well as fibril properties, i.e., cellulose crystallinity and fine content. Optical microscopy and scanning electron microscopy were also applied to directly visualize the (L)MFCs to provide some objective measure of the morphology of the (L)MFCs. The results indicate that most measures such as WRV, cellulose crystallinity, fine content cannot be used to compare (L)MFCs from different pulp fibers. Measures based on water interactions such as (L)MFC WRV and suspension stability appeared can provide some degree of indirect assessment. This study provided the utilities and limits of these indirect methods for relative comparison of the morphologies of (L)MFCs.

Properties important for solid-liquid separations change during the enzymatic hydrolysis of pretreated wheat straw

OBJECTIVES

The biochemical conversion of lignocellulosic biomass into renewable fuels and chemicals provides new challenges for industrial scale processes. One such process, which has received little attention, but is of great importance for efficient product recovery, is solid-liquid separations, which may occur both after pretreatment and after the enzymatic hydrolysis steps. Due to the changing nature of the solid biomass during processing, the solid-liquid separation properties of the biomass can also change. The objective of this study was to show the effect of enzymatic hydrolysis of cellulose upon the water retention properties of pretreated biomass over the course of the hydrolysis reaction.

RESULTS

Water retention value measurements, coupled with ¹H NMR T₂ relaxometry data, showed an increase in water retention and constraint of water by the biomass with increasing levels of cellulose hydrolysis. This correlated with an increase in the fines fraction and a decrease in particle size, suggesting that structural decomposition rather than changes in chemical composition was the most dominant characteristic.

CONCLUSIONS

With increased water retained by the insoluble fraction as cellulose hydrolysis proceeds, it may prove more difficult to efficiently separate hydrolysis residues from the liquid fraction with improved hydrolysis.

Water sorption in pretreated grasses as a predictor of enzymatic hydrolysis yields

This work investigated the impact of two alkaline pretreatments, ammonia fiber expansion (AFEX) and alkaline hydrogen peroxide (AHP) delignification performed over a range of conditions on the properties of corn stover and switchgrass. Changes in feedstock properties resulting from pretreatment were subsequently compared to enzymatic hydrolysis yields to examine the relationship between enzymatic hydrolysis and cell wall properties. The pretreatments function to increase enzymatic hydrolysis yields through different mechanisms; AFEX pretreatment through lignin relocalization and some xylan solubilization and AHP primarily through lignin solubilization. An important outcome of this work demonstrated that while changes in lignin content in AHP-delignified biomass could be clearly correlated to improved response to hydrolysis, compositional changes alone in AFEX-pretreated biomass could not explain differences in hydrolysis yields. We determined the water retention value, which characterizes the association of water with the cell wall of the pretreated biomass, can be used to predict hydrolysis yields for all pretreated biomass within this study.