Dewatering and removal of metals from urban anaerobically digested sludge by Fenton's oxidation

In this study, the relevance of Fenton's reaction for the treatment of urban anaerobically digested sludge was investigated. In a first part, the impact of the oxidation process on the improvement of the sludge dewaterability was studied. In a second part, the removal of heavy metals from the sludge was examined. Fenton's reaction was carried out with increasing concentrations of Fe²⁺ and H₂O₂ in 1:10 and 1:1 ratios. Dewaterability of the raw sludge was highly improved: the addition of 36 mM Fe²⁺ and 360 mM H₂O₂ led to specific cake resistance (SCR) and capillary suction time (CST) reductions of 99.8% and 98.8%, respectively. Indeed, under these conditions, SCR and CST of respectively 1.04 × 10¹¹ m kg^-1 and 18.5 ± 0.2 s were measured, and the treated sludge could be considered as having 'good dewaterability'. A significant impact was also observed on the removal of heavy metals from the sludge. After 1-h oxidation, Cd, Cr, Cu, Pb and Zn could be removed by 81.1 ± 0.1%, 25.1 ± 0.1%, 87.2 ± 1.1%, 77.3 ± 4.8% and 99.6 ± 0.3%, respectively. These results were consistent with the heavy metals' fractions in the sludge. It could be concluded that the addition of Fe²⁺ and H₂O₂ in a 1:10 ratio was more effective than in a 1:1 ratio. The results were consistent with the extracellular polymeric substance (EPS) contents in raw and treated sludge, since loosely bound EPS decreased significantly after the treatment.

A systematic study of the gaseous emissions from biosolids composting: raw sludge versus anaerobically digested sludge

Volatile organic compound (VOC) and ammonia, that contribute to odor pollution, and methane and nitrous oxide, with an important greenhouse effect, are compounds present in gaseous emission from waste treatment installations, including composting plants. In this work, gaseous emissions from the composting of raw (RS) and anaerobically digested sludge (ADS) have been investigated and compared at pilot scale aiming to provide emission factors and to identify the different VOC families present. CH4 and N2O emissions were higher in ADS composting (0.73 and 0.55 kg Mg(-1) sludge, respectively) than in RS composting (0.01 kg Mg(-1) sludge for both CH4 and N2O). NH3 and VOCs emitted were higher during the RS composting process (19.37 and 0.21 kg Mg(-1) sludge, respectively) than in ADS composting (0.16 and 0.04 kg Mg(-1) sludge). Significant differences were found in the VOC compositions emitted in ADS and RS composting, being more diverse in RS than ADS composting.

Supercritical fluid extraction of bacterial and archaeal lipid biomarkers from anaerobically digested sludge

Supercritical fluid extraction (SFE) was used in the analysis of bacterial respiratory quinone (RQ), bacterial phospholipid fatty acid (PLFA), and archaeal phospholipid ether lipid (PLEL) from anaerobically digested sludge. Bacterial RQ were determined using ultra performance liquid chromatography (UPLC). Determination of bacterial PLFA and archaeal PLEL was simultaneously performed using gas chromatography-mass spectrometry (GC-MS). The effects of pressure, temperature, and modifier concentration on the total amounts of RQ, PLFA, and PLEL were investigated by 23 experiments with five settings chosen for each variable. The optimal extraction conditions that were obtained through a multiple-response optimization included a pressure of 23.6 MPa, temperature of 77.6 °C, and 10.6% (v/v) of methanol as the modifier. Thirty nine components of microbial lipid biomarkers were identified in the anaerobically digested sludge. Overall, the SFE method proved to be more effective, rapid, and quantitative for simultaneously extracting bacterial and archaeal lipid biomarkers, compared to conventional organic solvent extraction. This work shows the potential application of SFE as a routine method for the comprehensive analysis of microbial community structures in environmental assessments using the lipid biomarkers profile.