Double Perovskite Single Crystals with High Laser Irradiation Stability for Solid-State Laser Lighting and Anti-counterfeiting

Laser lighting devices, comprising an ultraviolet (UV) laser chip and a phosphor material, have emerged as a highly efficient approach for generating high-brightness light sources. However, the high power density of laser excitation may exacerbate thermal quenching in conventional polycrystalline or amorphous phosphors, leading to luminous saturation and the eventual failure of the device. Here, for the first time, we raise a single-crystal (SCs) material for laser lighting considering the absence of grain boundaries that scatter electrons and phonons, achieving high thermal conductivity (0.81 W m-1 K-1) and heat-resistance (575 °C). The SCs products exhibit a high photoluminescence quantum yield (89%) as well as excellent stability toward high-power lasers (>12.41 kW/cm2), superior to all previously reported amorphous or polycrystalline matrices. Finally, the laser lighting device was fabricated by assembling the SC with a UV laser chip (50 mW), and the device can maintain its performance even after continuous operation for 4 h. Double perovskite single crystals doped with Yb3+/Er3+ demonstrated multimodal luminescence with the irradiation of 355 and 980 nm lasers, respectively. This characteristic holds significant promise for applications in spectrally tunable laser lighting and multimodal anticounterfeiting.

Fabrication and Luminescence Properties of Highly Transparent Green-Emitting Ho:Y2O3 Ceramics for Laser Diode Lighting

Highly transparent Ho:Y2O3 ceramics for laser diode lighting were prepared using the vacuum sintering method with 0.3 at.% Nb2O5 as a sintering additive. The microstructures, transmittance, and luminescence properties of the Ho:Y2O3 ceramic samples were investigated in detail. The transmittance levels of all samples with various Ho3+ concentrations reached ~81.5% (2 mm thick) at 1100 nm. Under the excitation of 363 nm (ultraviolet) or 448 nm (blue) light, Ho:Y2O3 transparent ceramic samples showed that green emission peaked at 550 nm. The emission intensity was strongly affected by the concentration of Ho3+ ions, reaching its highest level in the sample doped with 1 at.% Ho3+. The CIE coordinates of the luminescence were in the green region (i.e., the CIE coordinates of the sample doped with 1 at.% Ho3+ were [0.27, 0.53] and [0.30, 0.69], under the excitation of 363 nm and 448 nm light, respectively). The possibility of its application as laser diode lighting was reported. Under the excitation of 450 nm blue laser, the sample doped with 0.5 at.% Ho3+ had the best performance: the saturated luminous flux, lumen efficiency, and the luminescence saturation power densities were 800 lm, 57.7 lm/W, and 17.6 W/mm2, respectively. Furthermore, the materials have high thermal conductivity and mechanical strength due to their host of rare-earth sesquioxide. Thus, Ho:Y2O3 transparent ceramics are expected to be a promising candidate for green-light-emitting devices for solid-state lighting, such as laser diode lighting.

Ce/Mn/Cr: (Re,Y)3Al5O12 Phosphor Ceramics (Re = Gd, Tb and Lu) for White LED Lighting Significant Spectral Redshift and Improved Color-Rendering Index

In order to attain phosphor ceramics with a high Color-Rendering Index (CRI), samples with the composition of Y0.997-xRexCe0.003)3(Al0.9748 Mn2+0.024Cr3+0.0012)5O12(Rex = 0, Gd0.333, Gd0.666, Gd0.997, Tb0.333, Tb0.666, Tb0.997 and Lu0.997 were prepared by solid-state reaction and vacuum sintering, and exhibited potential for high-quality, solid-state lighting. Doping with Cr3+ and Mn2+ effectively enhanced the red component of Ce3+ spectra through the intense energy transfer from Ce3+ ions to Mn2+/Cr3+ ions. The crystal field splitting of [GdO8] and [TbO8] was more extensive than that of [YO8], causing a massive redshift in the Ce3+ emission peaks from 542 to 561 and 595 nm, while [LuO8] had an opposite effect and caused a blueshift with a peak position at 512 nm. White LED devices incorporating Ce/Mn/Cr: (Gd0.333Y0.664)3Al5O12 phosphor ceramic exhibited a high CRI of 83.97, highlighting the potential for enhancing the red-light component of white LED lighting.

Novel Red-Emitting Eu3+-Doped Y2(WxMo1-xO4)3 Phosphor with High Conversion Efficiency for Lighting and Display Applications

In this study, a series of trivalent europium-doped tungstate and molybdate samples were synthesized using an improved sol-gel and high-temperature solid-state reaction method. The samples had different W/Mo ratios and were calcined at various temperatures ranging from 800 to 1000 °C. The effects of these variables on the crystal structure and photoluminescence characteristics of the samples were investigated. It was found that a doping concentration of 50% for europium yielded the best quantum efficiency based on previous research. The crystal structures were found to be dependent on the W/Mo ratio and calcination temperature. Samples with x ≤ 0.5 had a monoclinic lattice structure that did not change with calcination temperature. Samples with x > 0.75 had a tetragonal structure that remained unchanged with calcination temperature. However, samples with x = 0.75 had their crystal structure solely dependent on the calcination temperature. At 800-900 °C, the crystal structure was tetragonal, while at 1000 °C, it was monoclinic. Photoluminescence behavior was found to correlate with crystal structure and grain size. The tetragonal structure had significantly higher internal quantum efficiency than the monoclinic structure, and smaller grain size had higher internal quantum efficiency than larger grain size. External quantum efficiency initially increased with increasing grain size and then decreased. The highest external quantum efficiency was observed at a calcination temperature of 900 °C. These findings provide insight into the factors affecting the crystal structure and photoluminescence behavior in trivalent europium-doped tungstate and molybdate systems.

Improved Photoluminescence Performance of Eu3+-Doped Y2(MoO4)3 Red-Emitting Phosphor via Orderly Arrangement of the Crystal Lattice

In this study, we developed a technology for broadening the 465 nm and 535 nm excitation peaks of Eu³⁺:Y₂(MoO₄)₃ via crystal lattice orderly arrangement. This was achieved by powder particle aggregation and diffusion at a high temperature to form a ceramic structure. The powdered Eu³⁺:Y₂(MoO₄)₃ was synthesized using the combination of a sol-gel process and the high-temperature solid-state reaction method, and it then became ceramic via a sintering process. Compared with the Eu³⁺:Y₂(MoO₄)₃ powder, the full width at half maximum (FWHM) of the excitation peak of the ceramic was broadened by two- to three-fold. In addition, the absorption efficiency of the ceramic was increased from 15% to 70%, while the internal quantum efficiency reduced slightly from 95% to 90%, and the external quantum efficiency was enhanced from 20% to 61%. More interestingly, the Eu³⁺:Y₂(MoO₄)₃ ceramic material showed little thermal quenching below a temperature of 473 K, making it useful for high-lumen output operating at a high temperature.

Stable, Heat-Conducting Phosphor Composites for High-Power Laser Lighting

Solid-state lighting using laser diodes is an exciting new development that requires new phosphor geometries to handle the greater light fluxes involved. The greater flux from the source results in more conversion and therefore more conversion loss in the phosphor, which generates self-heating, surpassing the stability of current encapsulation strategies used for light-emitting diodes, usually based on silicones. Here, we present a rapid method using spark plasma sintering (SPS) for preparing ceramic phosphor composites of the canonical yellow-emitting phosphor Ce-doped yttrium aluminum garnet (Ce:YAG) combined with a chemically compatible and thermally stable oxide, α-Al₂O₃. SPS allows for compositional modulation, and phase fraction, microstructure, and luminescent properties of ceramic composites with varying compositions are studied here in detail. The relationship between density, thermal conductivity, and temperature rise during laser-driven phosphor conversion is elucidated, showing that only modest densities are required to mitigate thermal quenching in phosphor composites. Additionally, the scattering nature of the ceramic composites makes them ideal candidates for laser-driven white lighting in reflection mode, where Lambertian scattering of blue light offers great color uniformity, and a luminous flux >1000 lm is generated using a single commercial laser diode coupled to a single phosphor element.