Fabrication and Characterization of PCL/PLGA Coaxial and Bilayer Fibrous Scaffolds for Tissue Engineering

Electrospinning is an innovative new fibre technology that aims to design and fabricate membranes suitable for a wide range of tissue engineering (TE) applications including vascular grafts, which is the main objective of this research work. This study dealt with fabricating and characterising bilayer structures comprised of an electrospun sheet made of polycaprolactone (PCL, inner layer) and an outer layer made of poly lactic-co-glycolic acid (PLGA) and a coaxial porous scaffold with a micrometre fibre structure was successfully produced. The membranes' propriety for intended biomedical applications was assessed by evaluating their morphological structure/physical properties and structural integrity when they underwent the degradation process. A scanning electron microscope (SEM) was used to assess changes in the electrospun scaffolds' structural morphology such as in their fibre diameter, pore size (μm) and the porosity of the scaffold surface which was measured with Image J software. During the 12-week degradation process at room temperature, most of the scaffolds showed a similar trend in their degradation rate except the 60 min scaffolds. The coaxial scaffold had significantly less mass loss than the bilayer PCL/PLGA scaffold with 1.348% and 18.3%, respectively. The mechanical properties of the fibrous membranes were measured and the coaxial scaffolds showed greater tensile strength and elongation at break (%) compared to the bilayer scaffolds. According to the results obtained in this study, it can be concluded that a scaffold made with a coaxial needle is more suitable for tissue engineering applications due to the improved quality and functionality of the resulting polymeric membrane compared to the basic electrospinning process. However, whilst fabricating a vascular graft is the main aim of this research work, the biological data will not present in this paper.

Lidocaine-eluting endotracheal tube effectively attenuates intubation related airway response

Background

Lidocaine (LDC) is a local anesthetic widely used to relieve intubation-related airway responses. However, low drug concentration and short effective duration of LDC is inadequate to provide a satisfactory anesthetic effect on the surface of the airway. The present study sought to develop a LDC-delivery endotracheal tube (ETT) to achieve high local drug concentration and sustained drug release with the aim of attenuating an intubation-related airway response.

Methods

ETTs and polyvinyl chloride (PVC) discs were coated with different molecular weight (MW) poly lactic-co-glycolic acid (PLGA: 50/50; MW: 3,000, 6,000, and 10,000) loaded with LDC by airbrush spray. The morphology of LDC-eluting coatings was analyzed using scanning electron microscopy. In vitro drug release was determined by ultraviolet spectrophotometer. An in vivo study was performed to investigate the differences in plasma LDC concentration, intubation tolerance, and tracheal tissue injury in rabbits undergoing intubation of blank, LDC-spray, or LDC-coated ETTs.

Results

Approximate 5 mg/cm² coatings (containing 2.5 mg/cm² LDC) were deposited onto the PVC discs and ETTs. While even distribution and smooth surfaces were generated in PLGA3000 + LDC and PLGA6000 + LDC coatings, PLGA10000 + LDC formed uneven and gullied coatings. Burst release within the first 4 h and sustained release for at least 5 days was achieved in vitro in PLGA + LDC coatings and the in vivo study demonstrated higher plasma LDC concentration and longer drug release duration in LDC-coated ETTs compared with LDC-spray. LDC-coated ETTs significantly improved intubation tolerance in rabbits, as measured by less general anesthetic consumption and longer tube tolerance duration in contrast to blank ETTs with or without LDC spray. Histology assessment showed less mucosal edema area in the PLGA3000 + LDC and PLGA6000 + LDC groups compared to the control, LDC-spray, and PLGA10000 + LDC groups. Among the different MW PLGAs, PLGA6000 presented optimal morphological characteristics, drug release, and anesthetic effect.

Conclusions

ETTs coated with PLGA + LDC effectively attenuate an intubation-related airway response via increasing local drug concentration and extending drug action duration, which demonstrates a potential therapeutic benefit for patients undergoing intubation.

Poly lactic-co-glycolic acid scaffold loaded with plasmid DNA encoding fibroblast growth factor-2 promotes periodontal ligament regeneration of replanted teeth

OBJECTIVE

This study investigated the effects of poly lactic-co-glycolic acid (PLGA) loaded with plasmid DNA encoding fibroblast growth factor-2 (pFGF-2) on human periodontal ligament cells (hPDLCs) in vitro and evaluated the ability of the PLGA/pFGF-2 scaffold to promote periodontal ligament (PDL) regeneration in a beagle dog teeth avulsion animal model.

BACKGROUND

Growth factor and scaffold play important roles in PDL regeneration. PLGA is a kind of biodegradable and biocompatible polymer that can be used as a carrier to deliver growth factors or genes. FGF-2 can induce potent proliferative responses, promote cell migration and regulate the production of extracellular matrix. Therefore, a gene-activated matrix composed of scaffold and genes is supposed to be a superior approach for promoting tissue regeneration.

METHODS

In this study, PLGA and PLGA/pFGF-2 scaffolds were fabricated using electrospinning. The characterization of scaffolds was shown by scanning electron microscope (SEM) and transmission electron microscope (TEM). dsDNA HS was used to test the plasmid release of PLGA/pFGF-2 scaffold. The viability and proliferation of hPDLCs on the two kinds of scaffolds were evaluated by the CCK-8 assay, and the expression of collagen I and scleraxis were analysed by RT-qPCR. The roots of avulsed teeth were covered by the two types of scaffolds and replanted into the alveolar pockets in beagles. Haematoxylin-eosin and Masson staining were used to evaluate the effects of PLGA/pFGF-2 scaffold on promoting PDL regeneration.

RESULTS

The smooth and uniform fibres can be observed in both scaffolds, and the plasmids were randomly distributed in the PLGA/pFGF-2 scaffold. dsDNA HS analysis demonstrated that the PLGA/pFGF-2 scaffold released up to 123 ng pFGF-2 over 21 days in a sustained manner without any obvious burst release. The PLGA/pFGF-2 scaffold promoted the proliferation of hPDLCs and increased the expression levels of collagen I and scleraxis compared with PLGA scaffold. Animal experiments showed that more regular PDL-like tissues and less root surface resorption occurred in the PLGA/pFGF-2 scaffold group compared with the PLGA scaffold group.

CONCLUSIONS

The PLGA/pFGF-2 scaffold promoted hPDLCs proliferation and facilitated periodontal ligament-related differentiation. The PLGA/pFGF-2 scaffold possesses excellent biological characteristics and could be used as a promising biomaterial for improving the treatment prognosis of replanted tooth.