Modeling the impact of high thermal conductivity paper on the performance and life of power transformers

Degradation of insulation paper is a key contributor to the failure of power transformers. Insulation degradation accelerates at elevated temperatures, which highlights the potential for better thermal management to prolong life. While several studies have analyzed the benefits of high thermal conductivity oil for reducing temperatures inside a transformer, this study is an initial assessment of the benefits of high thermal conductivity paper on transformer life. Blending particulates with cellulosic fibers offers a pathway for high thermal conductivity paper (with good dielectric properties), which can reduce internal temperatures. Presently, life extensions that can be achieved by the use of such thermally conducting papers were estimated, with the thermal conductivity of the paper being the key parameter under study. The analytical-numerical thermal model used in this study was validated against experimental measurements in a distribution transformer, adding confidence to the utility of the model. This model was then used to provide estimates of hot-spot temperature reduction resulting from the use of papers with higher thermal conductivity than baseline. Transformer life was predicted conventionally by tracking the degree of polymerization of paper over time, based on an Arrhenius model. Results indicate that increasing the thermal conductivity of paper from 0.2 W/mK (baseline) to 1 W/mK reduces the hot spot temperature by 10 °C. While degradation significantly depends on the moisture and oxygen content, the model shows that such a temperature reduction can increase life for all conditions, by as much as a factor of three.

Efficacy of hyaluronic acid gel and spray in healing of extraction wound: a randomized controlled study

OBJECTIVE

To evaluate the efficacy of 0.2% hyaluronic acid gel and 0.01% hyaluronic acid (HA) spray in the healing of extraction wounds using the ruler and digital planimetry method.

PATIENTS AND METHODS

30 systemically healthy female participants aged between 20-60 years requiring extraction were selected. Extraction sockets receiving 0.2% HA gel Gengigel®, 0.01% HA spray Gengigel®, and where hyaluronic acid was excluded were allocated into three groups as test group A (HA gel group), test group B (HA spray group) and control group (without HA). Socket wound closure was measured post-operative on the day of extraction and 1-week post extraction using digital planimetry and ruler method. Patient satisfaction rate was evaluated for both the gel and spray.

RESULTS

The wound closure with the ruler method was 43.01% for the control group, 67.01%, and 65.82% for the gel group and spray group respectively. The wound closure with the digital planimetry method was 47.97% for the control group, 69.08% for the gel group, and 66.94% for the spray group. The gel showed better results of wound closure as compared to the spray. However, the results were not statistically significant.

CONCLUSIONS

Hyaluronic acid offers a beneficial effect in early post-operative healing after extraction.

Characterization of Laser Gold Nanowarming: A Platform for Millimeter-Scale Cryopreservation

Preventing ice formation during cryopreservation by vitrification has led to the successful storage and banking of numerous cellular- and tissue-based biomaterials. In their breakthrough work, Peter Mazur's group achieved over 90% survival by using a laser warming technique for 100 μm mice oocytes that were cooled in 0.1 μL droplets with 2.3 M CPA and extracellularly loaded India ink (laser absorber). Laser warming can provide rapid and uniform warming rates to "outrun" damaging ice crystal growth. Here we generalize Mazur's technique for microliter-sized droplets using laser nanowarming to rewarm millimeter-scale biomaterials when loaded extracellularly and/or intracellularly with biocompatible 1064 nm resonant gold nanoparticles. First, we show that droplets containing low-concentration cryoprotectants (such as 2 M propylene glycol ± 1 M trehalose) can be rapidly cooled at rates up to 90 000 °C/min by plunging into liquid nitrogen to achieve either a visually transparent state (i.e., vitrified) or a cloudy with ice (i.e., nonvitrified) state. Both modeling and experiments were then used to characterize the laser nanowarming process for different laser energy (2-6 J), pulse length (1-20 ms), droplet volume (0.2-1.8 μL), cryoprotectant (2-3 M), and gold concentration (0.77 × 10¹⁷-4.8 × 10¹⁷ nps/m³) values to assess physical and biological success. Physical success was achieved by finding conditions that minimize cloudiness and white spots within the droplets during cooling and warming as signs of damaging ice formation and ice crystallization, respectively. Biological success was achieved using human dermal fibroblasts to find conditions that achieve ≥90% cell viability normalized to controls postwarming. Thus, physical and biological success can be achieved using this platform cryopreservation approach of rapid cooling and laser gold nanowarming in millimeter-scale systems.