Physician Perceptions of and Barriers to Pediatric Palliative Care for Children With Cancer in Brazil

PURPOSE

Early integration of pediatric palliative care (PPC) for children with cancer is critical to improving the quality of life of both the patient and family. Understanding physician perceptions of palliative care and perceived barriers to early integration is necessary to develop PPC in Brazil.

METHODS

The Assessing Doctors' Attitudes on Palliative Treatment survey was modified for use in Brazil. The survey was open from January 2022 to June 2022 and distributed to physicians of all specialties from participating institutions who treat children with cancer. Statistical analysis was complemented by qualitative analysis of open-ended responses.

RESULTS

A total of 272 respondents participated. Most respondents reported access to PPC experts for consultation (77.2%) and 34.5% indicated previous palliative care training. Physician knowledge of PPC was generally aligned with WHO guidance (median alignment, 93.0%; range, 80.5%-98.2%). However, about half (53.3%) felt comfortable addressing physical needs of patients receiving PPC, 35.3% addressing emotional needs, 25.8% addressing spiritual needs, and 33.5% addressing grief and bereavement needs. Most respondents (65.4%) felt palliative care should be involved from diagnosis, but only 10.3% stated that this occurred in their setting. The most important barriers identified were physician discomfort (89.0%), limited physician knowledge (88.6%), and lack of home-based services (83.8%).

CONCLUSION

Despite a strong understanding of the role of palliative care, physicians in Brazil reported low confidence delivering PPC to children with cancer. Additionally, physicians generally believed that PPC should be integrated earlier in the disease trajectory of children with cancer. This work will direct educational and capacity building initiatives to ensure greater access to high-quality PPC for children with cancer in Brazil to address patient and family suffering.

Quantification of heterogeneity in microstructural refinement in metals and alloys deformed to high plastic strains

The microstructure resulting from plastic deformation of metals and alloys typically contains heterogeneity on several length scales. Here we discuss the characterization by electron backscatter diffraction of one particular aspect of such heterogeneity, namely the uniformity of refinement by high angle boundaries after application of large plastic strains. A recently developed method for the quantification of this type of heterogeneity, based on the identification of areas that remain relatively unrefined by high angle boundaries (quantified by the fraction of low misorientation regions, f_LMR), is reviewed, and an extension of this method to quantity the degree of LMR clustering is presented. Additionaly, the required choices of parameters for use of this method are discussed and some general recommendations are given. The method is illustrated by a comparison of the microstructure in samples of aluminum heavily deformed by two different processing routes, where it is shown that the f_LMR parameter provides a measure of both the efficiency and uniformity in refinement by high angle boundaries. It is also shown how this approach can be used to investigate the relationship between nucleation of recrystallization and deformation microstructure heterogeneity in samples deformed to large strains.

RESULTS OF VERA APPLICATION TO THE AP1000® PWR STARTUP

This paper describes the application of the Virtual Environment for Reactor Applications, VERA, under development by the Consortium for Advanced Simulation of LWRs (CASL) to the core physics analysis of the AP1000 PWR.

The AP1000 PWR features an advanced first core with radial and axial heterogeneities which provides significant enhancements compared to traditional first cores, allowing best fuel usage and short transition to the equilibrium cycle with subsequent fuel reloads. These core advanced features can pose some challenges to the core physics tools making application of VERA to the AP1000 PWR first core especially relevant to qualify VERA performance.

This paper focuses on the qualification efforts at hot zero power conditions, where Monte-Carlo reference solutions have also been established. In particular, the paper focuses on the comparison of the predictions obtained with VERA for the four AP1000 units that recently started up with the measured values. It is shown that there is excellent agreement between VERA and the key reactor physics parameters measured during the AP1000 startup.

Gait analysis in neurological populations: Progression in the use of wearables

Gait assessment is an essential tool for clinical applications not only to diagnose different neurological conditions but also to monitor disease progression as it contributes to the understanding of underlying deficits. There are established methods and models for data collection and interpretation of gait assessment within different pathologies. This narrative review aims to depict the evolution of gait assessment from observation and rating scales to wearable sensors and laboratory technologies and provide limitations and possible future directions in the field of gait assessment. In this context, we first present an extensive review of current clinical outcomes and gait models. Then, we demonstrate commercially available wearable technologies with their technical capabilities along with their use in gait assessment studies for various neurological conditions. In the next sections, a descriptive knowledge for existing inertial and EMG based algorithms and a sign based guide that shows the outcomes of previous neurological gait assessment studies are presented. Finally, we state a discussion for the use of wearables in gait assessment and speculate the possible research directions by revealing the limitations and knowledge gaps in the literature.

Towards remote healthcare monitoring using accessible IoT technology: state-of-the-art, insights and experimental design

Healthcare studies are moving toward individualised measurement. There is need to move beyond supervised assessments in the laboratory/clinic. Longitudinal free-living assessment can provide a wealth of information on patient pathology and habitual behaviour, but cost and complexity of equipment have typically been a barrier. Lack of supervised conditions within free-living assessment means there is need to augment these studies with environmental analysis to provide context to individual measurements. This paper reviews low-cost and accessible Internet of Things (IoT) technologies with the aim of informing biomedical engineers of possibilities, workflows and limitations they present. In doing so, we evidence their use within healthcare research through literature and experimentation. As hardware becomes more affordable and feature rich, the cost of data magnifies. This can be limiting for biomedical engineers exploring low-cost solutions as data costs can make IoT approaches unscalable. IoT technologies can be exploited by biomedical engineers, but more research is needed before these technologies can become commonplace for clinicians and healthcare practitioners. It is hoped that the insights provided by this paper will better equip biomedical engineers to lead and monitor multi-disciplinary research investigations.

Inertial wearables as pragmatic tools in dementia

Dementia is a critically important issue due to its wide impact on health services as well as its personal and societal costs. Limitations exist for current dementia protocols, and there are calls to introduce modern technology that facilitates the addition of digital biomarkers to routine clinical practice. Wearable technology (wearables) are nearly ubiquitous in everyday life, gathering discrete and continuous digital data on habitual activities, but their utility in modern medicine remains low. Due to advances in data analytics, wearables are now commonly discussed as pragmatic tools to aid the diagnosis and treatment of a range of neurological disorders. Inertial sensor-based wearables are one such technology; they offer a low-cost approach to quantify routine movements that are fundamental to normal activities of daily living, most notably postural control and gait. Here, we provide a narrative review of how wearables are providing useful postural control and gait data to facilitate the capture of digital markers to aid dementia research. We outline the history of wearables, from their humble beginnings to their current use beyond the clinic, and explore their integration into modern systems, as well as the ongoing standardisation and regulatory efforts to integrate their use in clinical trials.

Do you see what I see? Mobile eye-tracker contextual analysis and inter-rater reliability

Mobile eye-trackers are currently used during real-world tasks (e.g. gait) to monitor visual and cognitive processes, particularly in ageing and Parkinson’s disease (PD). However, contextual analysis involving fixation locations during such tasks is rarely performed due to its complexity. This study adapted a validated algorithm and developed a classification method to semi-automate contextual analysis of mobile eye-tracking data. We further assessed inter-rater reliability of the proposed classification method. A mobile eye-tracker recorded eye-movements during walking in five healthy older adult controls (HC) and five people with PD. Fixations were identified using a previously validated algorithm, which was adapted to provide still images of fixation locations (n = 116). The fixation location was manually identified by two raters (DH, JN), who classified the locations. Cohen’s kappa correlation coefficients determined the inter-rater reliability. The algorithm successfully provided still images for each fixation, allowing manual contextual analysis to be performed. The inter-rater reliability for classifying the fixation location was high for both PD (kappa = 0.80, 95% agreement) and HC groups (kappa = 0.80, 91% agreement), which indicated a reliable classification method. This study developed a reliable semi-automated contextual analysis method for gait studies in HC and PD. Future studies could adapt this methodology for various gait-related eye-tracking studies.

Boundary migration in a 3D deformed microstructure inside an opaque sample

How boundaries surrounding recrystallization grains migrate through the 3D network of dislocation boundaries in deformed crystalline materials is unknown and critical for the resulting recrystallized crystalline materials. Using X-ray Laue diffraction microscopy, we show for the first time the migration pattern of a typical recrystallization boundary through a well-characterized deformation matrix. The data provide a unique possibility to investigate effects of both boundary misorientation and plane normal on the migration, information which cannot be accessed with any other techniques. The results show that neither of these two parameters can explain the observed migration behavior. Instead we suggest that the subdivision of the deformed microstructure ahead of the boundary plays the dominant role. The present experimental observations challenge the assumptions of existing recrystallization theories, and set the stage for determination of mobilities of recrystallization boundaries.

Wearables for independent living in older adults: Gait and falls

Solutions are needed to satisfy care demands of older adults to live independently. Wearable technology (wearables) is one approach that offers a viable means for ubiquitous, sustainable and scalable monitoring of the health of older adults in habitual free-living environments. Gait has been presented as a relevant (bio)marker in ageing and pathological studies, with objective assessment achievable by inertial-based wearables. Commercial wearables have struggled to provide accurate analytics and have been limited by non-clinically oriented gait outcomes. Moreover, some research-grade wearables also fail to provide transparent functionality due to limitations in proprietary software. Innovation within this field is often sporadic, with large heterogeneity of wearable types and algorithms for gait outcomes leading to a lack of pragmatic use. This review provides a summary of the recent literature on gait assessment through the use of wearables, focusing on the need for an algorithm fusion approach to measurement, culminating in the ability to better detect and classify falls. A brief presentation of wearables in one pathological group is presented, identifying appropriate work for researchers in other cohorts to utilise. Suggestions for how this domain needs to progress are also summarised.

Beyond the front end: Investigating a thigh worn accelerometer device for step count and bout detection in Parkinson's disease

Free-living ambulation with accelerometer-based devices is an attractive methodology to assess habitual behaviour within Parkinson's disease (PD). However, slowness of movement can contribute to difficulty in quantifying ambulatory/walking outcomes within this group by these devices. This study investigates the use of a commercial accelerometer device (activPAL^™) in those with moderate PD to understand its proprietary software (inbuilt algorithm) limitations. The values provided by the proprietary software are evaluated in comparison to novel algorithms on the same raw data to examine limitations for use within this cohort. The bespoke algorithms help to alter sensitivity in outcomes stemming from the same accelerometer data while also highlighting how slight changes in algorithms can drastically inflate/deflate values. In general, results show that the proprietary software generally quantifies lower values of outcomes (step and bout count), which is similar to previous findings. Variations in algorithm functionality highlight large heterogeneity in bout and step counts resulting from a lack of how they are defined within the literature. The novel alternative ambulatory algorithms presented here should be considered for use on raw data from the activPAL^™ in those with moderate/severe PD.

Accuracy and re-test reliability of mobile eye-tracking in Parkinson's disease and older adults

Mobile eye-tracking is important for understanding the role of vision during real-world tasks in older adults (OA) and people with Parkinson's disease (PD). However, accuracy and reliability of such devices have not been established in these populations. We used a novel protocol to quantify accuracy and reliability of a mobile eye-tracker in OA and PD. A mobile eye-tracker (Dikablis) measured the saccade amplitudes of 20 OA and 14 PD on two occasions. Participants made saccades between targets placed 5°, 10° and 15° apart. Impact of visual correction (glasses) on saccadic amplitude measurement was also investigated in 10 OA. Saccade amplitude accuracy (median bias) was -1.21° but a wide range of bias (-7.73° to 5.81°) was seen in OA and PD, with large vertical saccades (15°) being least accurate. Reliability assessment showed a median difference between sessions of <1° for both groups, with poor to good relative agreement (Spearman rho: 0.14 to 0.85). Greater accuracy and reliability was observed in people without visual correction. Saccade amplitude can be measured with variable accuracy and reliability using a mobile eye-tracker in OA and PD. Human, technological and study-specific protocol factors may introduce error and are discussed along with methodological recommendations.

Estimating cut points: A simple method for new wearables

Wearable technology is readily available for continuous assessment due to a growing number of commercial devices with increased data capture capabilities. However, many commercial devices fail to support suitable parameters (cut points) derived from the literature to help quantify physical activity (PA) due to differences in manufacturing. A simple metric to estimate cut points for new wearables is needed to aid data analysis.

OBJECTIVE

The purpose of this pilot study was to investigate a simple methodology to determine cut points based on ratios between sedentary behaviour (SB) and PA intensities for a new wrist worn device (PRO-Diary™) by comparing its output to a validated and well characterised 'gold standard' (ActiGraph™).

STUDY DESIGN

Twelve participants completed a semi-structured (four-phase) treadmill protocol encompassing SB and three PA intensity levels (light, moderate, vigorous). The outputs of the devices were compared accounting for relative intensity.

RESULTS

Count ratios (6.31, 7.68, 4.63, 3.96) were calculated to successfully determine cut-points for the new wrist worn wearable technology during SB (0-426) as well as light (427-803), moderate (804-2085) and vigorous (≥ 2086) activities, respectively.

CONCLUSION

Our findings should be utilised as a primary reference for investigations seeking to use new (wrist worn) wearable technology similar to that used here (i.e., PRO-Diary™) for the purposes of quantifying SB and PA intensities. The utility of count ratios may be useful in comparing devices or SB/PA values estimated across different studies. However, a more robust examination is required for different devices, attachment locations and on larger/diverse cohorts.

Instrumented assessment of test battery for physical capability using an accelerometer: a feasibility study

Recent work has identified subdomains (tests) of physical capability that are recommended for assessment of the healthy ageing phenotype (HAP). These include: postural control, locomotion, endurance, repeated sit-to-stand-to-sit and TUG. Current assessment methods lack sensitivity and are error prone due to their lack of consistency and heterogeneity of reported outcomes; instrumentation with body worn monitors provides a method to address these potential weaknesses. This work proposes the use of a single tri-axial accelerometer-based device with appropriate algorithms (referred to here as a body worn monitor, BWM) for the purposes of instrumented testing during physicality capability assessment. In this pilot study we present 14 BWM-based outcomes across the subdomains which include magnitude, frequency and spatio-temporal characteristics. Where possible, we compared BWM outcomes with manually recorded values and found no significant differences between locomotion and TUG tasks (p ≥ 0.319). Significant differences were found for the total distance walked during endurance (p = 0.037) and times for repeated sit-to-stand-to-sit transitions (p < 0.000). We identified reasons for differences and make recommendations for future testing. We were also able to quantify additional characteristics of postural control and gait which could be sensitive outcomes for future HAP assessment. Our findings demonstrate the feasibility of this method to enhance measurement of physical capacity. The methodology can also be applied to a wide variety of accelerometer-based monitors and is applicable to a range of intervention-based studies or pathological assessment.

iCap: Instrumented assessment of physical capability

•

Instrumented testing of five physical capability tasks with a single accelerometer.

•

Evaluated on a large cohort of older adults.

•

iCap provides robust quantitative data about physical capability.

•

iCap captures gait and postural control data known as sensitive to ageing/pathology.

•

Methodology may have practical utility in a wide range of surveys and studies.

Objectives

The aims of this study were to (i) investigate instrumented physical capability (iCap) as a valid method during a large study and (ii) determine whether iCap can provide important additional features of postural control and gait to categorise cohorts not previously possible with manual recordings.

Study design

Cross-sectional analysis involving instrumented testing on 74 adults who were recruited as part of a pilot intervention study; LiveWell. Participants wore a single accelerometer-based monitor (lower back) during standardised physical capability tests so that outcomes could be compared directly with manual recordings (stopwatch and measurement tape) made concurrently.

Main outcome measures

Time, distance, postural control and gait characteristics.

Results

Agreement between manual and iCap ranged from moderate to excellent (0.649–0.983) with mean differences between methods low and deemed acceptable. Additionally, iCap successfully quantified (i) postural control characteristics which showed sensitivity to distinguish between 5 variations of the standing balance test and (ii) 14 gait characteristics known to be sensitive to age/pathology.

Conclusions

Our findings show that iCap can provide robust quantitative data about physical capability during standardised tests while also providing sensitive (age/pathology) postural control and gait characteristics not previously quantifiable with manual recordings. The methodology which we propose may have practical utility in a wide range of clinical and public health surveys and studies, including intervention studies, where assessment could be undertaken within diverse settings. This will need to be tested in further validation studies in a wider range of settings.

Instrumenting gait with an accelerometer: a system and algorithm examination

Gait is an important clinical assessment tool since changes in gait may reflect changes in general health. Measurement of gait is a complex process which has been restricted to the laboratory until relatively recently. The application of an inexpensive body worn sensor with appropriate gait algorithms (BWM) is an attractive alternative and offers the potential to assess gait in any setting. In this study we investigated the use of a low-cost BWM, compared to laboratory reference using a robust testing protocol in both younger and older adults. We observed that the BWM is a valid tool for estimating total step count and mean spatio-temporal gait characteristics however agreement for variability and asymmetry results was poor. We conducted a detailed investigation to explain the poor agreement between systems and determined it was due to inherent differences between the systems rather than inability of the sensor to measure the gait characteristics. The results highlight caution in the choice of reference system for validation studies. The BWM used in this study has the potential to gather longitudinal (real-world) spatio-temporal gait data that could be readily used in large lifestyle-based intervention studies, but further refinement of the algorithm(s) is required.

BET protein inhibition shows efficacy against JAK2V617F-driven neoplasms

Small molecule inhibition of the BET family of proteins, which bind acetylated lysines within histones, has been shown to have a marked therapeutic benefit in pre-clinical models of mixed lineage leukemia (MLL) fusion protein-driven leukemias. Here, we report that I-BET151, a highly specific BET family bromodomain inhibitor, leads to growth inhibition in a human erythroleukemic (HEL) cell line as well as in erythroid precursors isolated from polycythemia vera patients. One of the genes most highly downregulated by I-BET151 was LMO2, an important oncogenic regulator of hematopoietic stem cell development and erythropoiesis. We previously reported that LMO2 transcription is dependent upon Janus kinase 2 (JAK2) kinase activity in HEL cells. Here, we show that the transcriptional changes induced by a JAK2 inhibitor (TG101209) and I-BET151 in HEL cells are significantly over-lapping, suggesting a common pathway of action. We generated JAK2 inhibitor resistant HEL cells and showed that these retain sensitivity to I-BET151. These data highlight I-BET151 as a potential alternative treatment against myeloproliferative neoplasms driven by constitutively active JAK2 kinase.

Revising the tuberculosis recording and reporting information system

OBJECTIVE

The tuberculosis recording and reporting information system (TB R&R), one of the five pillars of the DOTS strategy, has undergone a revision to comply with the new elements of the Stop TB Strategy and to ensure standardisation of essential TB information.

DESIGN

An expert group on TB R&R, including the main technical partners, held a series of consultations with the Stop TB Working Groups and countries. Draft revised forms were field tested by countries with the participation of technical partners. A survey was conducted by the World Health Organization (WHO) in 105 countries.

RESULT

The main changes in the TB R&R are the inclusion of TB-HIV activities (the leading reason for change at the country level), smear examinations and culture for settings performing this test routinely and the management of patient drug kits. The revised forms help monitor contributions from all care providers and community workers. The package of forms is presented in three sets: 1) essential data, 2) setting with routine culture and 3) additional data.

CONCLUSION

The revised R&R forms were endorsed by the WHO, the KNCV Tuberculosis Foundation, the International Union Against Tuberculosis and Lung Disease and the US Centers for Disease Control and Prevention in 2007. They are now available in English, French and Spanish, and are adopted in most countries.

Comparison of the performance of the activPAL™ Professional physical activity logger to a discrete accelerometer-based activity monitor

The aim of this study was to assess the accuracy of the 'activPAL Professional' physical activity logger by comparing its output to that of a proven discrete accelerometer-based activity monitor during extended measurements on healthy subjects while performing activities of daily living (ADL). Ten healthy adults, with unrestricted mobility, wore both the activPAL and the discrete dual accelerometer (Analog Devices ADXL202)-based activity monitor that recorded in synchronization with each other. The accelerometer derived data were then compared to that generated by the activPAL and a complete statistical and error analysis was performed using a Matlab program. This program determined trunk and thigh inclination angles to distinguish between sitting/lying, standing and stepping for the discrete accelerometer device and amount of time spent on each activity. Analysis was performed on a second-by-second basis and then categorized at 15s intervals in direct comparison with the activPAL generated data. Of the total time monitored (approximately 60 h) the detection accuracies for static and dynamic activities were approximately 98%. In a population of healthy adults, the data obtained from the activPAL Professional physical activity logger for both static and dynamic activities showed a close match to a proven discrete accelerometer data with an offset of approximately 2% between the two systems.

Characterisation of the anti-apoptotic function of survivin-DeltaEx3 during TNFalpha-mediated cell death

Survivin is an oncogenic protein involved in cell division and acts as an anti-apoptotic factor. It is highly expressed in most cancers and is associated with chemotherapy resistance, increased tumour recurrence, and shorter patient survival. This makes anti-survivin therapy an attractive cancer treatment strategy. These functions are mediated by several survivin spliced variants, whose expression may correlate with cancer progression. One of the spliced variants, survivin-ΔEx3, is known to inhibit apoptosis, through undefined mechanisms. Here, we characterised these mechanisms upon TNFα−mediated apoptosis, and showed that survivin-ΔEx3 acts as an adaptor, allowing the formation of a complex between Bcl-2 and activated caspase-3. The Bcl-2/survivin-ΔEx3 complex, but not survivin-ΔEx3 itself, inhibits the activity of caspase-3. Bcl-2 is therefore linked to the postmitochondrial apoptotic machinery by survivin-ΔEx3. Thus, survivin-ΔEx3 plays a key role in the inhibition of caspase-3 activity, and in the control of the mitochondrial checkpoint of apoptosis. This study suggests that targeting survivin-ΔEx3, rather than survivin alone, could be relevant for treating human cancers.

Mobility in Patients with Venous Leg Ulceration

OBJECTIVES

To compare mobility in patients with venous leg ulcers to matched controls and determine the influence of mobility, age and ulcer size on ulcer healing.

METHODS

25 leg ulcer patients, and 25 matched controls wore a mobility monitor (ActivPAL, PAL Technologies Ltd, Glasgow, Scotland)) which recorded the number of steps and amount of time spent walking, standing, sitting or lying for a one-week period. A walking index was calculated. The ulcer group were treated with compression bandaging and ulcer healing recorded over 12 weeks.

RESULTS

There were 13 female subjects in each group. The median age was 70.5 (range 30-89) years. There was no difference in the amount of time either group spent standing, walking and resting. There was a significant reduction in the number of steps taken and in the walking index in the ulcer group compared to controls (ulcer group, median 6,685 steps/day, range 2074-17,999; control group median 8750, range 4917-16,043, p<0.05, Mann Whitney u test). Smaller ulcers and ulcers of recent onset were most likely to heal within 12 weeks (p=0.005 and p=0.011 respectively, Chi squared test). The percentage of time spent mobilising and resting did not influence ulcer healing (r(s)=-0.125; p=0.55).

CONCLUSIONS

Mobility patterns among patients with leg ulcers are not significantly different to age matched controls. Ulcer patients take fewer steps per week compared to controls indicating they have reduced calf muscle pump function. Further studies are required to determine whether therapies which increase calf muscle activity have a role in ulcer treatment.

Classification tool for the systematic histological assessment of hepatocellular carcinoma, macroregenerative nodules, and dysplastic nodules in cirrhotic liver

AIM: To design a classification tool for the histological assessment of hepatocellular carcinoma (HCC), dysplastic nodules (DN), and macroregenerative nodules (MRN) in cirrhotic liver.

METHODS: Two hundred and twelve hepatocellular nodules (106 HCC; 74 MRN; 32 DN) were assessed systematically, quantitatively, and semiquantitatively as appropriate for 10 histological features that have been described as helpful in distinguishing small HCC, DN, and MRN in cirrhotic livers. The data were analyzed by multiple correspondence analysis (MCA).

RESULTS: MCA distributed HCC, DN, and MRN as defined by traditional histological evaluation as well as the individual histological variables, in a “malignancy scale”. Based on the MCA data representation, we created a classification tool, which categorizes an individual nodular lesion as MRN, DN, or HCC based on the balance of all histological features (i.e., vascular invasion, capsular invasion, tumor necrosis, tumor heterogeneity, reticulin loss, capillarization of sinusoids, trabecular thickness, nuclear atypia, and mitotic activity). The classification tool classified most (83%) of a validation set of 47 nodules in the same way as the routine histological assessment. No discrepancies were present for DN and MRN between the routine histological assignment and the classification tool. Of 25 HCC assigned by routine assessment in the validation set, 8 were assigned to the DN category by the classification tool.

CONCLUSION: We have designed a classification tool for the histological assessment of HCC and its putative precursors in cirrhotic liver. Application of this tool systematically records histological features of diagnostic importance in the evaluation of small HCC.

Determining dislocation cell sizes for high-strain deformation microstructures using the EBSP technique

The effect of several data collection and processing choices has been examined for high-resolution electron back-scatter pattern (EBSP) investigation of a highly deformed sample. The results were compared with a transmission electron microscope (TEM) investigation of the same sample. The estimated dislocation cell size was examined as a function of data cleaning strategy, line intercept vs. reconstruction method, critical misorientation angle definition and step-size. The best agreement with the TEM results was obtained using a modified relative reconstruction algorithm on fine step-size maps allowing some of the noise in the data to be overcome. Step sizes of up to one-quarter the average cell size yielded similar values for the estimated average cell size. As a result of the mixture of both high- and low-angle boundaries, single diffraction condition TEM images may give larger cell size estimates than the EBSP data. Orientation noise in the EBSP data, however, still limits the extent to which quantitative information can be extracted.

Developing community health nursing skills collaboration in a culturally diverse population

The graduate curriculum in Community Health Nursing at the University of South Alabama was revised to prepare nurses to function as a community health specialist. The revised curriculum model includes two semesters that focus on a specific population or high risk group of patients or clients. Emphasis is placed on the skills that community health nurses must have in order to assess communities, identify community needs, plan and implement interventions at the population aggregate or community level. During the first semester, or the practicum course, a community needs assessment is performed. In the internship course, the planned intervention is implemented and evaluated. The purpose of the paper is to describe the process of identifying and accessing a Cambodian population aggregate in a rural setting. The collaboration among faculty, student, preceptor, official agency, as well as lay leaders in the Cambodian community is described.

Unsupervised approval criteria for automated EBSP investigation of deformed metals

Unsupervised approval criteria have been investigated for orientations gathered from cold deformed samples (medium to high strain range) using the electron backscattering pattern technique. For such samples, the dislocation cell-size is on the order of the available step-size and pattern quality is generally low. Approval criteria for assessing the validity of measured orientations under these conditions were determined using, as a calibration, channel die cold deformed single crystals of stable orientations. In all cases, approval criteria based on an indexing confidence measure are found to be preferable. Different criteria are suggested, depending on whether the orientation data are subsequently to be used for texture analysis, or for a misorientation angle-based analysis. The latter is illustrated by an investigation of the number of deformation generated high angle boundaries introduced during a 90% cold reduction of a polycrystalline sample.

Cosmetic surgery for Cornelia de Lange syndrome

A case of Cornelia de Lange syndrome is presented in which modern plastic surgery was used to reduce excessive facial hair. Hairless forehead skin was enlarged using a tissue expander and earlobes were resurfaced.

The "antenna" procedure for the "hook-nail" deformity

The hook-nail deformity is a relatively common problem after fingertip amputations. It is usually ignored but can be quite disabling. This deformity can be corrected by a carefully planned operation. Most of the curved nail plate is removed, the pulp is reflected from the distal phalanx out to a normal contour, and then the full thickness of the nail bed is elevated off the distal phalanx and splinted by multiple small Kirschner pins in a straight position. The defect created is covered with a cross finger flap.

Comparative feeding trials of 2 maintenance diets containing different crude protein levels

2 commercially-produced maintenance diets containing crude protein levels of 14-15 and 21% were offered to normal mice and normal and thymectomized rats for 48-52 weeks. Both sexes of 2 strains of mouse, CBA/Ca and BALB/c, and 2 strains of rat, Wistar males and Lister Hooded females, were used, starting at 8-10 weeks of age.

Results indicated that the diet containing 14-15% crude protein was an acceptable substitute for the 21% protein diet and could reduce the dietary cost by 30-40%.

Polyribosomes in rat-liver preparations

1. The distribution of rat-liver polyribosomes in sucrose density gradients has been investigated with regard to the effects of the preparative procedures and the physiological and pathological condition of the animal. 2. By using carefully defined conditions, three principal polyribosomal fractions have been isolated with S(20,w) values of 340, 275 and 225s in addition to the dimerized 120s and single 80s ribosomes. 3. The polyribosomes were very sensitive to treatment with ribonuclease and to mechanical stresses. 4. Incubation of dispersed hepatic cells and also cell-free preparations with puromycin in the presence of ATP and phosphoenolpyruvate caused rapid partial degradation of the polyribosomes. Treatment of the dispersed cells with actinomycin D also degraded the polyribosomes. 5. The liver polyribosomes of rats not raised under pathogen-free conditions and possibly of rats with an arthritic syndrome may be more fragile than those of healthy pathogen-free animals. 6. Treatment of pathogen-free rats with drugs stimulating liver anabolism profoundly affected the distribution of polyribosomes in sucrose density gradients.