Fingerprinting of chlorinated paraffins and their transformation products in plastic consumer products

Chlorinated paraffins (CPs) can be classified according to their length as short-chain (SC, C10-C13), medium-chain (MC, C14-C17) and long-chain (LC, C ≥ 18) CPs. Technical CP-mixtures can contain a wide range of carbon- (C-, nC = 10-30) and chlorine- (Cl-, nCl = 3-19) homologues. CPs are high-production volume chemicals (>106 t/y). They are used as flame-retardants, plasticizers and coolant fluids. Due to the persistence, bioaccumulation, long-range environmental transport potential and adverse effects, SCCPs are regulated as persistent organic pollutants (POPs) by the Stockholm Convention. Transformation of CPs can lead to the formation of unsaturated compounds such as chlorinated mono- (CO), di- (CdiO) and tri-olefins (CtriO). Such transformation reactions can occur at different stages of CP manipulation providing characteristic C-/Cl-homologue distributions. All this results in unique patterns that collectively create a fingerprint, which can be distinguished from CP-containing samples. Therefore, CP-fingerprinting can develop into a promising tool for future source apportionment studies and with it, the reduction of environmental burden of CPs and hazards to humans. Herein, CP-containing plastics were studied to establish fingerprints and develop this method. We analyzed four household items by reverse-phase liquid-chromatography coupled with a mass spectrometer with an atmospheric pressure chemical ionization source and an Orbitrap mass analyzer (RP-LC-APCI-Orbitrap-MS) operated at a resolution of 120000 (FWHM at m/z 200). MS-data of different CP-, CO-, CdiO- and CtriO-homologues were efficiently processed with an R-based automatic mass spectra evaluation routine (RASER). From the 16720 ions searched for, up to 4300 ions per sample were assigned to 340 C-/Cl-homologues of CPs and their transformation products. Specific fingerprints were deduced from the C-/Cl-homologues distributions, the carbon- (nC) and chlorine- (nCl) numbers and saturation degree. These fingerprints were compared with the ones obtained by a GC-ECNI-Orbitrap-MS method.

Quantification of individual Rare Earth Elements from industrial sources in sewage sludge

Rare Earth Elements (REEs) are used in increasing amounts in technical applications and consumer products. However, to date, the contribution of industrial sources to the loads of individual REEs in wastewater streams have not been quantified. Here, we determine the REE contents in sludge collected from 63 wastewater treatment plants (WWTPs) across Switzerland. To quantify the industrial fraction of individual REEs in the sewage sludge, we develop two complementary approaches, based on REE ratios and REE pattern fitting. Unspecific (background) inputs, with REE patterns similar to the averaged REE pattern of soils collected across Switzerland, dominate the REE budget of most WWTPs. A few WWTPs receive significant REE inputs from specific industrial sources. Based on population equivalents of Switzerland, we estimate a total annual load of 4200 kg Cerium (Ce, 0.5 g Ce year^-1 capita^-1), with an industrial contribution of 2000 kg year^-1. The latter agrees with estimates of probabilistic mass flow models for engineered nanoscale CeO₂ particles discharged to the sewer network. About 7 kg year^-1 of Samarium (Sm,total for Switzerland: 184 kg year^-1 or 0.02 g Sm year^-1 capita^-1) and 3 kg year^-1 of Europium (Eu,total for Switzerland: 44 kg year^-1 or 0.005 g Eu year^-1 capita^-1) are assigned to industrial inputs from single WWTPs. Gadolinium (Gd) is used in the form of a stable complex as contrast agent in magnetic resonance imaging. Assuming 10% removal of Gd during wastewater treatment, we calculate an annual discharge of 90 kg of Gd from one individual WWTP to surface waters. WWTPs with exceptionally high industrial inputs of specific REEs warrant detailed investigations to identify the respective sources and to assess whether REE concentrations in effluents are elevated to the same degree.

Mercury loads and fluxes from wastewater: A nationwide survey in Switzerland

Mercury (Hg) pollution threatens ecosystems and human health. Wastewater treatment plants (WWTPs) play a key role in limiting Hg discharges from wastewaters to rivers and lakes, but large-scale studies to estimate Hg loads and discharge at national levels are scarce. We assessed the concentration, flux, speciation, and removal of Hg in municipal wastewater throughout Switzerland by investigating 64 WWTPs in a pre-study and a subset of 28 WWTPs in the main study. We also studied the behavior and pathways of Hg along the various treatment steps in a state-of-the-art WWTP. The resulting dataset, representative of industrialized countries, provides an overview of (i) current Hg concentration ranges, (ii) average per capita loads, and (iii) wastewater Hg inputs into surface waters. The results allowed estimation of a total Hg (THg) load in Swiss wastewater of 130 ± 30 kg THg/year (15.7 mg/capita/y), of which 96 ± 4% is retained in sewage sludge. About 4.7 ± 0.5 kg THg/year (0.57 mg/capita/y) is discharged with the treated wastewater into surface waters. This corresponds to only 1.5-3% of the THg load carried by the major Swiss rivers, indicating that >95% of riverine Hg originates from other sources. Extrapolation to the population of Europe would yield a total amount of 11,700 kg THg/year in raw wastewater, with some 480 kg THg/year discharged to surface waters. Monomethyl mercury on average accounted for 0.23% of THg, and its fraction remained constant along the different treatment steps.

Zürich Statement on Future Actions on Per- and Polyfluoroalkyl Substances (PFASs)

Per- and polyfluoroalkyl substances (PFASs) are man-made chemicals that contain at least one perfluoroalkyl moiety, [Formula: see text]. To date, over 4,000 unique PFASs have been used in technical applications and consumer products, and some of them have been detected globally in human and wildlife biomonitoring studies. Because of their extraordinary persistence, human and environmental exposure to PFASs will be a long-term source of concern. Some PFASs such as perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) have been investigated extensively and thus regulated, but for many other PFASs, knowledge about their current uses and hazards is still very limited or missing entirely. To address this problem and prepare an action plan for the assessment and management of PFASs in the coming years, a group of more than 50 international scientists and regulators held a two-day workshop in November, 2017. The group identified both the respective needs of and common goals shared by the scientific and the policy communities, made recommendations for cooperative actions, and outlined how the science-policy interface regarding PFASs can be strengthened using new approaches for assessing and managing highly persistent chemicals such as PFASs. https://doi.org/10.1289/EHP4158.

Quantification of Element Fluxes in Wastewaters: A Nationwide Survey in Switzerland

The number and quantities of trace elements used in industry, (high-tech) consumer products, and medicine are rapidly increasing, but the resulting emissions and waste streams are largely unknown. We assessed the concentrations of 69 elements in digested sewage sludge and effluent samples from 64 municipal wastewater treatment plants as well as in major rivers in Switzerland. This data set, representative of an entire industrialized country, presents a reference point for current element concentrations, average per-capita fluxes, loads discharged to surface waters, and economic waste-stream values. The spatial distribution of many individual elements could be attributed either to predominant geogenic or to anthropogenic inputs. Per-capita element fluxes ranged from <10 μg day^-1 (e.g., Au, In, and Lu) to >1 mg day^-1 (e.g., Zn, Sc, Y, Nb, and Gd) and >1 g day^-1 (e.g., for P, Fe, and S). Effluent loads of some elements contributed significantly to riverine budgets (e.g., 24% for Zn, 50% for P, and 83% for Gd), indicating large anthropogenic inputs via the wastewater stream. At various locations, precious metal concentrations in sludge were similar to those in profitable mining ores, with total flux values of up to 6.8 USD per capita per year or 15 USD per metric ton of dry sludge.

Stocks and flows of PBDEs in products from use to waste in the U.S. and Canada from 1970 to 2020

The time-dependent stock of PBDEs contained in in-use products (excluding building materials and large vehicles) was estimated for the U.S. and Canada from 1970 to 2020 based on product consumption patterns, PBDE contents, and product lifespan. The stocks of penta- and octaBDE peaked in in-use products at 17,000 (95% confidence interval: 6000-70,000) and 4,000 (1,000-50,000) tonnes in 2004, respectively, and for decaBDE at 140,000 (40,000-300,000) tonnes in 2008. Products dominating PBDE usage were polyurethane foam used in furniture (65% of pentaBDE), casings of electrical and electronic equipment or EEE (80% of octaBDE), and EEE and automotive seating (35% of decaBDE for each category). The largest flow of PBDEs in products, excluding automotive sector, to the waste phase occurred between 2005 and 2008 at ∼10,000 tonnes per year. Total consumption of penta-, octa-, and decaBDE from 1970 to 2020 in products considered was estimated at ∼46,000, ∼25,000, and ∼380,000 tonnes, respectively. Per capita usage was estimated at 10-250, 10-150, and 200-2000 g·capita(-1)·y(-1) for penta-, octa-, and decaBDE, respectively, over the time span. Considering only the first use (no reuse and/or storage) of PBDE-containing products, approximately 60% of the stock of PBDEs in 2014 or ∼70,000 tonnes, of which 95% is decaBDE, will remain in the use phase in 2020. Total emissions to air of all PBDEs from the in-use product stock was estimated at 70-700 tonnes between 1970 and 2020, with annual emissions of 0.4-4 tonnes·y(-1) for each of penta- and octaBDE and 0.35-3.5 tonnes·y(-1) for decaBDE in 2014.

Comment on "Emergence and fate of cyclic volatile polydimethylsiloxanes (D4, D5) in municipal waste streams: release mechanisms, partitioning and persistence in air, water, soil and sediments"

The review article "Emergence and fate of cyclic volatile polydimethylsiloxanes (D4, D5) in municipal waste streams: Release mechanisms, partitioning and persistence in air, water, soil and sediments" by Surita and Tansel covers a relevant topic, but there are several serious issues with this paper. The inappropriate handling of data gathered from various sources has resulted in a flawed dataset. In addition, the authors performed several erroneous or meaningless calculations with the data. Their dataset leads to incorrect and misleading interpretations and should not be used.

Emissions of polybrominated diphenyl ethers (PBDEs) in Zurich, Switzerland, determined by a combination of measurements and modeling

Polybrominated diphenyl ethers (PBDEs) have been widely used as flame retardants but they are of concern and are currently being phased-out because of their environmentally hazardous properties and their potential to cause adverse health effects. We analyzed PBDEs in Zurich, Switzerland, and applied a multi-media environmental fate model to back-calculate the rate of PBDE emission to air. PBDE concentrations in ambient air were measured in summer 2010 and winter 2011 in the city center of Zurich. Concentrations were higher in summer (sum PBDEs 118-591 pg m(-3)) than in winter (sum PBDEs 17-151 pg m(-3)), and are on the upper end of concentrations reported in literature for urban sites with no point sources of PBDEs. The emissions derived from our measurements (summer: 53-165 μg capita(-1) d(-1), winter: 25-112 μg capita(-1) d(-1)) and extrapolated to annual emissions for Switzerland (114-406 kg a(-1)) lie in the middle of ranges reported on the basis of substance flow analyses and emission inventories. The difference between summer and winter emissions is small compared to the difference that would be expected from the temperature dependence of PBDE vapor pressure, which would be consistent with emissions occurring to a large extent from flame-proofed materials located indoors under nearly constant temperature conditions and/or emissions to air occurring by suspension of particles containing PBDEs. Compared to previous studies in Switzerland, concentrations and emissions of PBDEs appear to have increased during the last five years with an increasing contribution of decabromodiphenyl ether, despite the addition of PBDEs to national and international regulations.

Emissions of decamethylcyclopentasiloxane from Chicago

Decamethylcyclopentasiloxane (D5) is a high-production-volume chemical that is emitted to air in tens of thousands of tonnes each year globally. However, specific information about emission rates to air is still limited. Here we present an estimate of D5 emissions from the city of Chicago based on measurements that have recently been published. We used a multimedia environmental fate model parameterized for Chicago to back-calculate the emission rate of D5 from the measurements. Our estimated average emission rate for D5 is 500 (2.5-to-97.5-percentile interval: 260-1100) kg d(-1). The corresponding per-capita emissions of 190 (100-420) mg capita(-1)d(-1) agree well with previous estimates for Europe and North America.

Emissions of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans during 2010 and 2011 in Zurich, Switzerland

Persistent organic pollutants (POPs) are ubiquitous contaminants of environmental and human health relevance, but their emissions into the environment are still poorly known. In this study, concentrations of selected POPs were measured in ambient air in Zurich, Switzerland, and interpreted with a multimedia mass balance model. The aim of the combination of measurements and modeling was to back-calculate atmospheric emission rates of POPs. Measurements were performed in summer 2010 and winter 2011 and target analytes included polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Estimated emissions were higher in summer than in winter. Emission estimates for Zurich can be extrapolated to annual averages for Switzerland of 312 kg·a(-1) (39 mg·capita(-1)·a(-1)), 53 kg·a(-1) (7 mg·capita(-1)·a(-1)), and 3 kg·a(-1) (0.4 mg·capita(-1)·a(-1), 94 g WHO98-TEQ·a(-1), 65 g I-TEQ·a(-1)) for the six indicator PCBs (iPCBs), the twelve coplanar dioxin-like PCBs (dlPCBs), and the 17 2,3,7,8-chlorosubstituted PCDD/Fs, respectively. The emission rates of iPCBs are in agreement with existing emission inventories, whereas for PCDD/Fs the emissions are five times higher than the estimates from the Swiss national emission inventory. Emissions of dlPCBs in Switzerland are presented here for the first time. Our study also provides the first seasonally resolved emission rates of POPs, which were determined with our combined measurement and modeling approach. These findings highlight the relevance of ongoing sources of POPs, even decades after regulations aiming to reduce or eliminate sources were established.

Temperature-induced sex reversal is not responsible for sex-ratio distortions in grayling Thymallus thymallus or brown trout Salmo trutta

On the basis of the experiments carried out over various years, it was concluded that (1) grayling Thymallus thymallus and brown trout Salmo trutta are resistant to temperature-induced sex reversal at ecologically relevant temperatures, (2) environmental sex reversal is unlikely to cause the persistent sex ratio distortion observed in at least one of the study populations and (3) sex-specific tolerance of temperature-related stress may be the cause of distorted sex ratios in populations of T. thymallus or S. trutta.

Concentrations in ambient air and emissions of cyclic volatile methylsiloxanes in Zurich, Switzerland

Tens of thousands of tonnes of cyclic volatile methylsiloxanes (cVMS) are used each year globally, which leads to high and continuous cVMS emissions to air. However, field measurements of cVMS in air and empirical information about emission rates to air are still limited. Here we present measurements of decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) in air for Zurich, Switzerland. The measurements were performed in January and February 2011 over a period of eight days and at two sites (city center and background) with a temporal resolution of 6-12 h. Concentrations of D5 and D6 are higher in the center of Zurich and range from 100 to 650 ng m(-3) and from 10 to 79 ng m(-3), respectively. These values are among the highest levels of D5 and D6 reported in the literature. In a second step, we used a multimedia environmental fate model parametrized for the region of Zurich to interpret the levels and time trends in the cVMS concentrations and to back-calculate the emission rates of D5 and D6 from the city of Zurich. The average emission rates obtained for D5 and D6 are 120 kg d(-1) and 14 kg d(-1), respectively, which corresponds to per-capita emissions of 310 mg capita(-1) d(-1) for D5 and 36 mg capita(-1) d(-1) for D6.

Good modeling practice guidelines for applying multimedia models in chemical assessments

Multimedia mass balance models of chemical fate in the environment have been used for over 3 decades in a regulatory context to assist decision making. As these models become more comprehensive, reliable, and accepted, there is a need to recognize and adopt principles of Good Modeling Practice (GMP) to ensure that multimedia models are applied with transparency and adherence to accepted scientific principles. We propose and discuss 6 principles of GMP for applying existing multimedia models in a decision-making context, namely 1) specification of the goals of the model assessment, 2) specification of the model used, 3) specification of the input data, 4) specification of the output data, 5) conduct of a sensitivity and possibly also uncertainty analysis, and finally 6) specification of the limitations and limits of applicability of the analysis. These principles are justified and discussed with a view to enhancing the transparency and quality of model-based assessments.

The myelin protein MAL affects peripheral nerve myelination: a new player influencing p75 neurotrophin receptor expression

The myelin and lymphocyte protein (MAL) is a raft-associated membrane protein predominantly expressed by oligodendrocytes and Schwann cells. Here we show that MAL regulates myelination in the peripheral nervous system. In mice overexpressing MAL, myelination was retarded and fibers were hypomyelinated, whereas myelination in MAL knockout mice was accelerated. This was not due to impaired Schwann cell proliferation, differentiation or axonal sorting. We found that the expression level of p75 neurotrophin receptor mRNA and protein was strongly reduced in developing sciatic nerves in MAL-overexpressing mice. This reduction is well correlated with the observed alterations in myelination initiation, speed of myelination and alterations in Remak bundle development. Our results suggest a functional role for MAL in peripheral myelination by influencing the expression of membrane components that mediate axon-glia interaction during ensheathment and myelin wrapping.