Variability of Ammonia and Methane Emissions from Animal Feeding Operations in Northeastern Colorado

Concentrated animal feeding operations (CAFOs) are major emitters of both ammonia (NH₃) and methane (CH₄). However, current emission inventories have limited temporal resolution and use data derived from a small subset of farms. To this end, we deployed three mobile laboratories during the DISCOVER-AQ campaign in summer 2014 with a focus on northeastern Colorado. Observations of NH₃ and CH₄ plumes downwind of 43 CAFOs were used to investigate the diurnal and site-to-site variability of emissions with an inverse area source plume modeling approach. Ammonia emissions scaled to all permitted animals in Weld, Morgan, and Larimer counties were estimated at 1.9 Gg month^-1, 50% greater than the U.S. NEI 2014 and 360% greater than EDGAR for the month of August. Methane emissions were likewise estimated at 10.6 Gg month^-1, consistent with the U.S. GHGI but 99% greater than EDGAR. Significant differences between individual CAFOs with repeat observations were also observed for both CH₄ and NH₃ emissions. The large subfarm, site-to-site, and diurnal variabilities observed show the importance of measurements taken across these scales in order to derive representative emission factors.

Large Fugitive Methane Emissions From Urban Centers Along the U.S. East Coast

Urban emissions remain an underexamined part of the methane budget. Here we present and interpret aircraft observations of six old and leak-prone major cities along the East Coast of the United States. We use direct observations of methane (CH4), carbon dioxide (CO2), carbon monoxide (CO), ethane (C2H6), and their correlations to quantify CH4 emissions and attribute to natural gas. We find the five largest cities emit 0.85 (0.63, 1.12) Tg CH4/year, of which 0.75 (0.49, 1.10) Tg CH4/year is attributed to natural gas. Our estimates, which include all thermogenic methane sources including end use, are more than twice that reported in the most recent gridded EPA inventory, which does not include end-use emissions. These results highlight that current urban inventory estimates of natural gas emissions are substantially low, either due to underestimates of leakage, lack of inclusion of end-use emissions, or some combination thereof.

Overview of surface measurements and spatial characterization of submicrometer particulate matter during the DISCOVER-AQ 2013 campaign in Houston, TX

The sources of submicrometer particulate matter (PM₁) remain poorly characterized in the industrialized city of Houston, TX. A mobile sampling approach was used to characterize PM₁ composition and concentration across Houston based on high-time-resolution measurements of nonrefractory PM₁ and trace gases during the DISCOVER-AQ Texas 2013 campaign. Two pollution zones with marked differences in PM₁ levels, character, and dynamics were established based on cluster analysis of organic aerosol mass loadings sampled at 16 sites. The highest PM₁ mass concentrations (average 11.6 ± 5.7 µg/m³) were observed to the northwest of Houston (zone 1), dominated by secondary organic aerosol (SOA) mass likely driven by nighttime biogenic organonitrate formation. Zone 2, an industrial/urban area south/east of Houston, exhibited lower concentrations of PM₁ (average 4.4 ± 3.3 µg/m³), significant organic aerosol (OA) aging, and evidence of primary sulfate emissions. Diurnal patterns and backward-trajectory analyses enable the classification of airmass clusters characterized by distinct PM sources: biogenic SOA, photochemical aged SOA, and primary sulfate emissions from the Houston Ship Channel. Principal component analysis (PCA) indicates that secondary biogenic organonitrates primarily related with monoterpenes are predominant in zone 1 (accounting for 34% of the variability in the data set). The relevance of photochemical processes and industrial and traffic emission sources in zone 2 also is highlighted by PCA, which identifies three factors related with these processes/sources (~50% of the aerosol/trace gas concentration variability). PCA reveals a relatively minor contribution of isoprene to SOA formation in zone 1 and the absence of isoprene-derived aerosol in zone 2. The relevance of industrial amine emissions and the likely contribution of chloride-displaced sea salt aerosol to the observed variability in pollution levels in zone 2 also are captured by PCA.

IMPLICATIONS

This article describes an urban-scale mobile study to characterize spatial variations in submicrometer particulate matter (PM₁) in greater Houston. The data set indicates substantial spatial variations in PM₁ sources/chemistry and elucidates the importance of photochemistry and nighttime oxidant chemistry in producing secondary PM₁. These results emphasize the potential benefits of effective control strategies throughout the region, not only to reduce primary emissions of PM₁ from automobiles and industry but also to reduce the emissions of important secondary PM₁ precursors, including sulfur oxides, nitrogen oxides, ammonia, and volatile organic compounds. Such efforts also could aid in efforts to reduce mixing ratios of ozone.

Characterization of Ammonia, Methane, and Nitrous Oxide Emissions from Concentrated Animal Feeding Operations in Northeastern Colorado

Atmospheric emissions from animal husbandry are important to both air quality and climate, but are hard to characterize and quantify as they differ significantly due to management practices and livestock type, and they can vary substantially throughout diurnal and seasonal cycles. Using a new mobile laboratory, ammonia (NH₃), methane (CH₄), nitrous oxide (N₂O), and other trace gas emissions were measured from four concentrated animal feeding operations (CAFOs) in northeastern Colorado. Two dairies, a beef cattle feedlot, and a sheep feedlot were chosen for repeated diurnal and seasonal measurements. A consistent diurnal pattern in the NH₃ to CH₄ enhancement ratio is clearly observed, with midday enhancement ratios approximately four times greater than nighttime values. This diurnal pattern is similar, with slight variations in magnitude, at the four CAFOs and across seasons. The average NH₃ to CH₄ enhancement ratio from all seasons and CAFOs studied is 0.17 (+0.13/-0.08) mol/mol, in agreement with statewide inventory averages and previous literature. Enhancement ratios for NH₃ to N₂O and N₂O to CH₄ are also reported. The enhancement ratios can be used as a source signature to distinguish feedlot emissions from other NH₃ and CH₄ sources, such as fertilizer application and fossil fuel development, and the large diurnal variability is important for refining inventories, models, and emission estimates.

Direct and Indirect Measurements and Modeling of Methane Emissions in Indianapolis, Indiana

This paper describes process-based estimation of CH4 emissions from sources in Indianapolis, IN and compares these with atmospheric inferences of whole city emissions. Emissions from the natural gas distribution system were estimated from measurements at metering and regulating stations and from pipeline leaks. Tracer methods and inverse plume modeling were used to estimate emissions from the major landfill and wastewater treatment plant. These direct source measurements informed the compilation of a methane emission inventory for the city equal to 29 Gg/yr (5% to 95% confidence limits, 15 to 54 Gg/yr). Emission estimates for the whole city based on an aircraft mass balance method and from inverse modeling of CH4 tower observations were 41 ± 12 Gg/yr and 81 ± 11 Gg/yr, respectively. Footprint modeling using 11 days of ethane/methane tower data indicated that landfills, wastewater treatment, wetlands, and other biological sources contribute 48% while natural gas usage and other fossil fuel sources contribute 52% of the city total. With the biogenic CH4 emissions omitted, the top-down estimates are 3.5-6.9 times the nonbiogenic city inventory. Mobile mapping of CH4 concentrations showed low level enhancement of CH4 throughout the city reflecting diffuse natural gas leakage and downstream usage as possible sources for the missing residual in the inventory.

Atmospheric emission characterization of Marcellus shale natural gas development sites

Limited direct measurements of criteria pollutants emissions and precursors, as well as natural gas constituents, from Marcellus shale gas development activities contribute to uncertainty about their atmospheric impact. Real-time measurements were made with the Aerodyne Research Inc. Mobile Laboratory to characterize emission rates of atmospheric pollutants. Sites investigated include production well pads, a well pad with a drill rig, a well completion, and compressor stations. Tracer release ratio methods were used to estimate emission rates. A first-order correction factor was developed to account for errors introduced by fenceline tracer release. In contrast to observations from other shale plays, elevated volatile organic compounds, other than CH4 and C2H6, were generally not observed at the investigated sites. Elevated submicrometer particle mass concentrations were also generally not observed. Emission rates from compressor stations ranged from 0.006 to 0.162 tons per day (tpd) for NOx, 0.029 to 0.426 tpd for CO, and 67.9 to 371 tpd for CO2. CH4 and C2H6 emission rates from compressor stations ranged from 0.411 to 4.936 tpd and 0.023 to 0.062 tpd, respectively. Although limited in sample size, this study provides emission rate estimates for some processes in a newly developed natural gas resource and contributes valuable comparisons to other shale gas studies.

Methane emissions from natural gas compressor stations in the transmission and storage sector: measurements and comparisons with the EPA greenhouse gas reporting program protocol

Equipment- and site-level methane emissions from 45 compressor stations in the transmission and storage (T&S) sector of the US natural gas system were measured, including 25 sites required to report under the EPA greenhouse gas reporting program (GHGRP). Direct measurements of fugitive and vented sources were combined with AP-42-based exhaust emission factors (for operating reciprocating engines and turbines) to produce a study onsite estimate. Site-level methane emissions were also concurrently measured with downwind-tracer-flux techniques. At most sites, these two independent estimates agreed within experimental uncertainty. Site-level methane emissions varied from 2-880 SCFM. Compressor vents, leaky isolation valves, reciprocating engine exhaust, and equipment leaks were major sources, and substantial emissions were observed at both operating and standby compressor stations. The site-level methane emission rates were highly skewed; the highest emitting 10% of sites (including two superemitters) contributed 50% of the aggregate methane emissions, while the lowest emitting 50% of sites contributed less than 10% of the aggregate emissions. Excluding the two superemitters, study-average methane emissions from compressor housings and noncompressor sources are comparable to or lower than the corresponding effective emission factors used in the EPA greenhouse gas inventory. If the two superemitters are included in the analysis, then the average emission factors based on this study could exceed the EPA greenhouse gas inventory emission factors, which highlights the potentially important contribution of superemitters to national emissions. However, quantification of their influence requires knowledge of the magnitude and frequency of superemitters across the entire T&S sector. Only 38% of the methane emissions measured by the comprehensive onsite measurements were reportable under the new EPA GHGRP because of a combination of inaccurate emission factors for leakers and exhaust methane, and various exclusions. The bias is even larger if one accounts for the superemitters, which were not captured by the onsite measurements. The magnitude of the bias varied from site to site by site type and operating state. Therefore, while the GHGRP is a valuable new source of emissions information, care must be taken when incorporating these data into emission inventories. The value of the GHGRP can be increased by requiring more direct measurements of emissions (as opposed to using counts and emission factors), eliminating exclusions such as rod-packing vents on pressurized reciprocating compressors in standby mode under Subpart-W, and using more appropriate emission factors for exhaust methane from reciprocating engines under Subpart-C.

Measurements of methane emissions from natural gas gathering facilities and processing plants: measurement results

Facility-level methane emissions were measured at 114 gathering facilities and 16 processing plants in the United States natural gas system. At gathering facilities, the measured methane emission rates ranged from 0.7 to 700 kg per hour (kg/h) (0.6 to 600 standard cubic feet per minute (scfm)). Normalized emissions (as a % of total methane throughput) were less than 1% for 85 gathering facilities and 19 had normalized emissions less than 0.1%. The range of methane emissions rates for processing plants was 3 to 600 kg/h (3 to 524 scfm), corresponding to normalized methane emissions rates <1% in all cases. The distributions of methane emissions, particularly for gathering facilities, are skewed. For example, 30% of gathering facilities contribute 80% of the total emissions. Normalized emissions rates are negatively correlated with facility throughput. The variation in methane emissions also appears driven by differences between inlet and outlet pressure, as well as venting and leaking equipment. Substantial venting from liquids storage tanks was observed at 20% of gathering facilities. Emissions rates at these facilities were, on average, around four times the rates observed at similar facilities without substantial venting.

Methane emissions from natural gas infrastructure and use in the urban region of Boston, Massachusetts

Methane emissions from natural gas delivery and end use must be quantified to evaluate the environmental impacts of natural gas and to develop and assess the efficacy of emission reduction strategies. We report natural gas emission rates for 1 y in the urban region of Boston, using a comprehensive atmospheric measurement and modeling framework. Continuous methane observations from four stations are combined with a high-resolution transport model to quantify the regional average emission flux, 18.5 ± 3.7 (95% confidence interval) g CH4 ⋅ m(-2) ⋅ y(-1). Simultaneous observations of atmospheric ethane, compared with the ethane-to-methane ratio in the pipeline gas delivered to the region, demonstrate that natural gas accounted for ∼ 60-100% of methane emissions, depending on season. Using government statistics and geospatial data on natural gas use, we find the average fractional loss rate to the atmosphere from all downstream components of the natural gas system, including transmission, distribution, and end use, was 2.7 ± 0.6% in the Boston urban region, with little seasonal variability. This fraction is notably higher than the 1.1% implied by the most closely comparable emission inventory.

Air Pollutant Mapping with a Mobile Laboratory During the BEE-TEX Field Study

The Aerodyne Mobile Laboratory was deployed to the Houston Ship Channel and surrounding areas during the Benzene and Other Toxics Exposure field study in February 2015. We evaluated atmospheric concentrations of volatile organic hydrocarbons and other hazardous air pollutants of importance to human health, including benzene, 1,3-butadiene, toluene, xylenes, ethylbenzenes, styrene, and NO2. Ambient concentration measurements were focused on the neighborhoods of Manchester, Harrisburg, and Galena Park. The most likely measured concentration of 1,3-butadiene in the Manchester neighborhood (0.17 ppb) exceeds the Environmental Protection Agency's E-5 lifetime cancer risk level of 0.14 ppb. In all the three neighborhoods, the measured benzene concentration falls below or within the E-5 lifetime cancer risk levels of 0.4-1.4 ppb for benzene. Pollution maps as a function of wind direction show the impact of nearby sources.

Demonstration of an ethane spectrometer for methane source identification

Methane is an important greenhouse gas and tropospheric ozone precursor. Simultaneous observation of ethane with methane can help identify specific methane source types. Aerodyne Ethane-Mini spectrometers, employing recently available mid-infrared distributed feedback tunable diode lasers (DFB-TDL), provide 1 s ethane measurements with sub-ppb precision. In this work, an Ethane-Mini spectrometer has been integrated into two mobile sampling platforms, a ground vehicle and a small airplane, and used to measure ethane/methane enhancement ratios downwind of methane sources. Methane emissions with precisely known sources are shown to have ethane/methane enhancement ratios that differ greatly depending on the source type. Large differences between biogenic and thermogenic sources are observed. Variation within thermogenic sources are detected and tabulated. Methane emitters are classified by their expected ethane content. Categories include the following: biogenic (<0.2%), dry gas (1-6%), wet gas (>6%), pipeline grade natural gas (<15%), and processed natural gas liquids (>30%). Regional scale observations in the Dallas/Fort Worth area of Texas show two distinct ethane/methane enhancement ratios bridged by a transitional region. These results demonstrate the usefulness of continuous and fast ethane measurements in experimental studies of methane emissions, particularly in the oil and natural gas sector.

Hypoxylon sp., an endophyte of Persea indica, producing 1,8-cineole and other bioactive volatiles with fuel potential

An endophytic fungus of Persea indica was identified, on the basis of its anamorphic stage, as Nodulosporium sp. by SEM. Partial sequence analysis of ITS rDNA revealed the identity of the teleomorphic stage of the fungus as Hypoxylon sp. It produces an impressive spectrum of volatile organic compounds (VOCs), most notably 1,8-cineole, 1-methyl-1,4-cyclohexadiene, and tentatively identified (+)-.alpha.-methylene-.alpha.-fenchocamphorone, among many others, most of which are unidentified. Six-day-old cultures of Hypoxylon sp. displayed maximal VOC-antimicrobial activity against Botrytis cinerea, Phytophthora cinnamomi, Cercospora beticola, and Sclerotinia sclerotiorum suggesting that the VOCs may play some role in the biology of the fungus and its survival in its host plant. Media containing starch- or sugar-related substrates best supported VOC production by the fungus. Direct on-line quantification of VOCs was measured by proton transfer mass spectrometry covering a continuous range with optimum VOC production occurred at 6 days at 145 ppmv with a rate of production of 7.65 ppmv/h. This report unequivocally demonstrates that 1,8-cineole (a monoterpene) is produced by a microorganism, which represents a novel and important source of this compound. This monoterpene is an octane derivative and has potential use as a fuel additive as do the other VOCs of this organism. Thus, fungal sourcing of this compound and other VOCs as produced by Hypoxylon sp. greatly expands their potential applications in medicine, industry, and energy production.

Outcome of the treatment for sarcoidosis

The clinical characteristics and pathology of sarcoidosis are well defined; however, the optimal therapy for this disorder remains unclear. Although patients respond, acutely, to corticosteroid therapy, it is not clear that these agents ultimately alter the natural history of this disease. These observations and that corticosteroids have significant side effects suggest that only patients who will clearly benefit from corticosteroid therapy should be treated. In a prospective study of patients' with sarcoidosis (n = 98), we limited our use of corticosteroids to those patients who had objective evidence of recent deterioration in lung function or serious extrapulmonary disease. All patients with sarcoidosis fulfilling these criteria were treated with corticosteroids. Patients were tapered off corticosteroids after they were treated for 1 yr. Of the 98 study subjects, 91 had not received therapy for the disease and 7 were on therapy before entry into the study. Of the 91 previously untreated patients, 55 were observed without therapy and 36 were treated with corticosteroids. Of those who were observed off therapy, only eight deteriorated. Of these latter patients, six responded and stabilized with the administration of corticosteroids for treatment of the underlying disease, to antibiotics for an associated bronchiectasis, or to diuretics for treatment for congestive heart failure; two were lost to follow-up. None of these six patients deteriorated while receiving corticosteroids. Of the 36 patients who deteriorated and were treated with corticosteroids, 20 remained stable and 16 improved clinically. Of the 37 patients who were eventually tapered off corticosteroids, five deteriorated and required reinitiation of corticosteroid therapy.(ABSTRACT TRUNCATED AT 250 WORDS)

Bronchoalveolar lavage in interstitial lung disease: effect of volume of fluid infused

To evaluate the effect of varying infusate volume on the results of bronchoalveolar lavage (BAL) in patients with interstitial lung disease, 55 patients underwent 58 BAL during which both a 100- and 250-ml lavage was performed in the same lobe of the lung. Although the percent of the fluid that was returned and the total numbers of cells were greater in the 250- vs. the 100-ml lavage, there were no significant differences in cell differentials or numbers of cells per milliliter between the 100- and 250-ml BAL. We conclude that infusate volume does not affect cell differentials or numbers of cells per milliliter of bronchoalveolar lavage fluid in patients with interstitial lung disease.

Use of segmental airway lavage to obtain relevant mediators from the lungs of asthmatic and control subjects

Studies have demonstrated that increased amounts of histamine in the airways of asthmatic patients are associated with increased airway reactivity. However, using routine bronchoalveolar lavage (BAL), histamine can be detected in only a portion of asthmatic subjects and a minority of control populations. To obtain relevant mediators from the airways in higher concentrations by avoiding the dilution inherent with a standard BAL, a technique was developed to lavage isolated airway segments of the human lung that employed a double-lumen bronchoscope and a balloon-tipped catheter. Lavage fluid obtained by this method yielded significantly higher concentrations of histamine than that obtained with routine BAL (asthmatic subjects, 2,403 +/- 633 pg/ml vs 188 +/- 42 pg/ml; rhinitis subjects, 533 +/- 187 pg/ml vs 113 +/- 53 pg/ml; normal subjects, 174 +/- 63 pg/ml vs 11 +/- 11 pg/ml). Similar findings were also noted for prostaglandin D2 (PGD2). Segmental airway lavage also resulted in higher lavage fluid concentrations of LTB, than routine BAL. Segmental airway lavage should help in studying the relationship of mast cell degranulation to airways reactivity in both asthmatic and other study populations.